Rocking the Euro boat: scheduled market announcements' effects on Euro implied volatility

The purpose of this thesis is to investigate scheduled market announcements’ effects on Euro implied volatility. Timeline selected for this study ranges from 2005 to 2009. The method chosen is so-called event study approach, in which five days prior to a news announcement stand for a pre-event period, and five days after the announcement form a post-event period. Statistical research method employed is Mann-Whitney-Wilcoxon test, which examines two evenly-sized distributions’ equality, in this case the distributions being the pre- and post-event periods. Observations are based on daily data of US dollar nominated Euro at-the-money call options. Research results partially back up previous literature’s view of uncertainty increasing prior to the news announcement. After the exact contents of the news is public, uncertainty levels measured by implied volatility tend to lower.

Photograph - Hamilton Killaly Woodruff with a Child on Rocking Horse

Black and white photograph, 16 cm x 11 ½ cm, of Hamilton Killaly Woodruff with a young child [Charles Woodruff Band?]. The child is sitting on a rocking horse and Hamilton is standing watching the child with his hat in one hand and his cane in the other.

Study on the orientation degree of Pb1-xLaxTiO3 thin films by the rocking curve technique and its morphological aspects

Thin films of perovskite-type materials such as PbTiO3, BaTiO3, (Pb,La)TiO3, (Pb, La)(ZrTi)O-3, KNbO3, and Pb(Mg,Nb)03 have been attracting great interest for applications like non-volatile memories, ultrasonic sensors and optical devices. Thin film should be epitaxially grown or at least highly textured since the properties of this anisotropic material depend on the crystallographic orientation. For optical devices, in particular, an epitaxial thin film without defects are essential to reduce optical propagation losses. Pb1-xLaxTiO3 (PLT) where x=0, 13 and 27% thin films were prepared by a chemical method (polymeric precursors method), and deposited by the spin coating technique onto substrates of SrTiO3 (STO) and LaAlO3 (LAO). The films were then beat treated at 500 degrees C in a controlled atmosphere of 0,. The orientation degree of the thin films was obtained from rocking curve technique, by means of X-ray difftaction analysis. A microstructural study revealed that the films were crack-free, homogeneous and have low roughness. (c) 2006 Elsevier B.V. All rights reserved.

Cleaner shrimp use a to advertise cleaning rocking dance service to clients

Signals transmit information to receivers about sender attributes, increase the fitness of both parties, and are selected for in cooperative interactions between species to reduce conflict [1, 2]. Marine cleaning interactions are known for stereotyped behaviors [3-6] that likely serve as signals. For example, dancing and tactile dancing in cleaner fish may serve to advertise cleaning services to client fish [7] and manipulate client behavior [8], respectively. Cleaner shrimp clean fish [9], yet are cryptic in comparison to cleaner fish. Signals, therefore, are likely essential for cleaner shrimp to attract clients. Here, we show that the yellow-beaked cleaner shrimp [110] Urocaridella sp. c [11] uses a stereotypical side-to-side movement, or rocking dance, while approaching potential client fish in the water column. This dance was followed by a cleaning interaction with the client 100% of the time. Hungry cleaner shrimp, which are more willing to clean than satiated ones [12], spent more time rocking and in closer proximity to clients Cephaiopholis cyanostigma than satiated ones, and when given a choice, clients preferred hungry, rocking shrimp. The rocking dance therefore influenced client behavior and, thus, appears to function as a signal to advertise the presence of cleaner shrimp to potential clients.

Sintesi e caratterizzazione di batterie tipo rocking chair basate sugli analoghi del blu di Prussia

La rapida espansione del mercato delle batterie incalza lo sviluppo di materiali elettrodici basati su elementi largamente disponibili sulla crosta terrestre, rispettosi dell'ambiente ed economicamente sostenibili. Nel presente elaborato si effettua lo studio di elettrodi basati sugli analoghi del blu di Prussia (PBA) come una classe di composti inorganici che presenta diverse proprietà elettrochimiche adatte per applicazioni legate all’energy storage. A tal riguardo, la sintesi del PBA ferro esacianocobaltato (FeHCC) è stata effettuata mediante un metodo di coprecipitazione semplice e poco costoso. L’utilizzo di tecniche analitiche quali XAS, PXRD, MP-AES e TGA ha permesso di ricavare la composizione del ferro esacianocobaltato, dell'esacianoferrato di titanio e del manganese esacianoferrato nonché diverse informazioni di carattere strutturale. In seguito, le prestazioni elettrochimiche degli elettrodi sono state valutate mediante voltammetria ciclica, utilizzando come agenti intercalanti gli ioni K+ e Na+ contenuti nel relativo elettrolita acquoso.Infine, grazie ai dati così ottenuti, è stato possibile assemblare e testare diversi layout di coin cell in configurazione rocking chair completamente basate su elettrodi PBA; anche in questo caso, la voltammetria ciclica e le tecniche galvanostatiche sono state utilizzate per valutare le prestazioni elettrochimiche e raccogliere informazioni sulla capacità gravimetrica ottenibile da questi dispositivi.

Woodgrain defect on tinned steel Flandres foil

Tin electrocoated steel strip, also referred to as Flandres foil, is largely used for manufacturing food containers. Tinplates must have good corrosion resistance, workability, weldability, as well as a bright appearance. The woodgrain defect, a not yet fully understood defect that occurs on tinplates and accounts for their high scrap rate, consists of alternate bands of bright/dull reflectivity and resembles longitudinally cut wood. Observations of the woodgrain defect by scanning electron microscopy showed that the molten tin spreads irregularly during both the melting and solidification stages. X-ray diffraction analyses showed that the metallic tin tended to crystallize in the (200) direction for coupons with and without the woodgrain defect. Nevertheless, the preferential orientation degree decreased for coupons with the woodgrain defect. The rocking curves, also known as omega-scan, showed that the tin grains were uniformly aligned parallel to the strip surface for coupons with no defects, whereas for tinplates with woodgrain, the tin grains were not uniformly oriented, probably due to the misalignment of the grains in relation to the surface. (C) 2011 Elsevier Inc. All rights reserved.

Experimental and theoretical study of transport properties in uniaxially pressed (Bi, Pb)(2)Sr(2)Ca(2)Cu(3)O(10+delta) ceramic samples

Experimental and theoretical studies on the magnetic field dependence of the electrical resistance R(B(a)) and the transport noise (TN) in polycrystalline high-T(c) superconductors subjected to different uniaxial compacting pressures were conducted. X-ray diffraction rocking curves were performed in different surfaces of the samples in order to investigated the degree of texture The results indicated an improvement of the degree of texture with increasing the uniaxial compacting pressure In theoretical simulations of the data, the polycrystalline superconductors were described as a series-parallel array of Josephson devices The intergranular magnetic field is described within the framework of the intragranular flux-trapping model and the distribution of the grain-boundary angles is assumed to follow the Rayleigh statistical function The proposed model describes well the experimental magnetoresistance R(B(a)) data We have found that the behavior of the R(B(a)) curves changes appreciably when different uniaxially compacting pressures are applied to the sample and such a changes are reproduced by the model when different grain-boundary angles distributions are used In addition, changes in the R(B(a)) dependence have their counterparts in the experimental transport noise signals (C) 2009 Elsevier B.V. All rights reserved

Precast concrete wall-foundation connection. Development of a seismic dissipative connection

Seismic events are a major factor to consider in structural design of buildings in many countries. With the purpose of saving lives, most of the design codes lead to structural solutions that withstand large seismic actions without collapsing, but without taking into account a possible usage of the structures after the earthquake. As a result, it is necessary to consider the time needed to repair/retrofit the damaged structures (i.e. the downtime) since this period of inactivity may result in huge financial implications for the occupants of the buildings. In order to minimise the damages and simplify repair operations, structural solutions with rocking systems and negligible residual displacements have been developed during the last two decades. Systems with precast concrete rocking walls were studied with the aim of investigat- ing suitable and convenient structural alternatives to minimise the damage in case of an earthquake. Experimental, numerical and analytical analyses on post-tensioned solutions, with and without energy dissipation devices, were carried out in this research. The energy dissipation devices were made from steel angles that were further developed during the research. Different solutions for these devices were experimentally tested under cyclic loading and the results are presented. Numerical and analytical work on steel angles was also carried out. Regarding the concrete rocking wall systems, two concrete rocking wall systems were studied: post-tensioned walls and post-tensioned walls with energy dissipation devices. In the latter, the solution was to fix them externally to the wall, allowing their easy replacement after an earthquake. It is shown that the dissipaters are a viable solution for use in precast concrete rocking wall systems. A building case study is presented. The comparison between a traditional monolithic system and a hybrid solution was carried out, allowing the evaluation of the efficiency of the solution that was developed.

Experimental analysis of the cyclic response of traditional timber joints and their influence on the seismic capacity of timber frame structures

Timber connections represent the crucial part of a timber structure and a great variability exists in terms of types of connections and mechanisms. Taking as case study the widespread traditional timber frame structures, in particular the Portuguese Pombalino buildings, one of the most common timber connection is the half-lap joint. Connections play a major role in the overall behaviour of a structure, particularly when assessing their seismic response, since damage is concentrated at the connections. For this reason, an experimental campaign was designed and distinct types of tests were carried out on traditional half-lap joints to assess their in-plane response. In particular, pull-out and in-plane cyclic tests were carried out on real scale unreinforced connections. Subsequently, the connections were retrofitted, using strengthening techniques such as self-tapping screws, steel plates and GFRP sheets. The tests chosen were meant to capture the hysteretic behaviour and dissipative capacity of the connections and characterise their response and, therefore, their influence on the seismic response of timber frame walls, particularly concerning their uplifting and rotation capacity, that could lead to rocking in the walls. In this paper, the results of the experimental campaign are presented in terms of hysteretic curves, dissipated energy and equivalent viscous damping ratio. Moreover, recommendations are provided on the most appropriate retrofitting solutions.

Bimodal information increases spontaneous interpersonal synchronization of goal directed upper limb movements

When interacting with each other, people often synchronize spontaneously their movements, e.g. during pendulum swinging, chair rocking[5], walking [4][7], and when executing periodic forearm movements[3].Although the spatiotemporal information that establishes the coupling, leading to synchronization, might be provided by several perceptual systems, the systematic study of different sensory modalities contribution is widely neglected. Considering a) differences in the sensory dominance on the spatial and temporal dimension[5] , b) different cue combination and integration strategies [1][2], and c) that sensory information might provide different aspects of the same event, synchronization should be moderated by the type of sensory modality. Here, 9 naïve participants placed a bottle periodically between two target zones, 40 times, in 12 conditions while sitting in front of a confederate executing the same task. The participant could a) see and hear, b) see , c) hear the confederate, d) or audiovisual information about the movements of the confederate was absent. The couple started in 3 different relative positions (i.e., in-phase, anti-phase, out of phase). A retro-reflective marker was attached to the top of the bottles. Bottle displacement was captured by a motion capture system. We analyzed the variability of the continuous relative phase reflecting the degree of synchronization. Results indicate the emergence of spontaneous synchronization, an increase with bimodal information, and an influence of the initial phase relation on the particular synchronization pattern. Results have theoretical implication for studying cue combination in interpersonal coordination and are consistent with coupled oscillator models.

Hyperesthésie et apaisement: aspects historiques et psychologiques

L'auteur fait une synthèse des contributions, actuelles ou passées, décrivant la tendance chez un individu à exacerber ses sensations (hyperesthésie), agréables ou douloureuses, y compris les éprouvés émotionnels. Il met l'accent sur l'effet antagoniste ou inhibiteur que les sensations peuvent avoir les unes sur les autres. Puisque l'angoisse implique, elle aussi, une dimension sensorielle, il insiste sur le but paradoxal d'apaisement et donc défensif qui peut motiver la recherche de sensations, en se référant à la notion de « procédé autocalmant » développée par l'école psychosomatique de Paris.¦Ce travail se divise en deux parties consacrées respectivement à l'enfant et à l'adulte, elles-mêmes déclinées sur deux versants, l'un « normal » et l'autre pathologique. Il y est question :¦- des comportements de l'enfant susceptibles d'être produits pour les sensations apaisantes qu'ils procurent : succion, ingestion d'aliments, balancement, masturbation, etc.¦- des auto-agressions dans certains troubles du développement de l'enfant et de l'adolescent¦- de l'hypersensibilité ou émotivité dans les typologies du tempérament ou du caractère proposées dans l'histoire; de la passion également, envisagée comme un embrasement lui aussi potentiellement défensif¦- de deux parmi les troubles de l'adulte qui ont le plus été décrits en termes d'hyperesthésie, à savoir l'hystérie et la manie.¦Il s'agit d'un travail théorique, qui intègre des aspects historiques, et qui peut servir de base à des explorations cliniques ou des recherches plus spécifiques.¦The author presents a summary of past and recent publications describing the disposition in the individual to exacerbate sensations (hyperesthesia), whether pleasurable or painful, including emotional experiences. He emphasizes the possible opposing or inhibiting action these sensations can have between them.¦As anxiety also implies a sensory dimension, the author underlines the paradoxically alleviating, and hence defensive purpose driving the pursuit of sensations, by reference to the notion of self-soothing procedures (procédés auto-calmants), conceptualized by the Paris Psychosomatic School.¦This work is divided into two parts focusing on childhood and adulthood respectively, each in its turn concentrating on both the « normal » and pathological aspects. Topics covered include:¦- behaviours that children may engage in for the soothing effects they produce ; sucking, consumption of food, rocking, masturbation, etc.¦- self-harm in some cases of developmental disorders in children and adolescents¦- hypersensibility and emotivity as described in historical temperament and character types ; passion, also regarded as another defensive excitement.¦- two of the most commonly described disorders of hyperesthesia in adults, namely hysteria and mania.¦This thesis constitutes a research of a theoretical nature. It integrates historical aspects, which can be used as a basis for clinical exploration or further more specific research.

La Pedralta, un ejemplo de patrimonio geológico de Girona

Pedralta is a very large rocking stone shaped in monzonitic granite. Its volume and weight are approximately 34 m3 and 90 Tm. The fall of such block has supposed the loss of a worthy geotipe

Tunable epitaxial growth of magnetoresistive La2/3Sr1/3MnO3 thin films

We report on the growth of epitaxial La2/3Sr1/3MnO3 thin films on buffered Si(001) substrates. We show that a suitable choice of the buffer heterostructure allows one to obtain epitaxial (00h), (0hh), and (hhh) manganite thin films. The magnetotransport properties are investigated and we have found that the low-field magnetoresistance is directly related to the width of the normal-to-plane rocking curves, irrespective of the film orientation. The magnetic anisotropy of these films has also been determined.