Pedestrian Crashes in Ethiopia: Identification of contributing factors through modelling of exposure and road environment variables

Pedestrian safety is a critical issue in Ethiopia. Reports show that 50 to 60% of traffic fatality victims in the country are pedestrians. The primary aim of this research was to examine the possible causes of and contributing factors to crashes with pedestrians in Ethiopia, and improve pedestrian safety by recommending possible countermeasures. The secondary aim was to develop appropriate pedestrian crash models for two-way two-lane rural roads and roundabouts in the capital city of Ethiopia. This research uses quantitative methods throughout the process of the investigation. The research has applied various statistical methods. The results of this research support the idea that geometric and operational features have significant influence on pedestrian safety and crashes. Accordingly, policies and strategies are needed to safeguard pedestrians in Ethiopia.

Are safety-related features of the road environment associated with smaller declines in physical activity among youth?

This study examined how objective measures of the local road environment related to safety were associated with change in physical activity (including active transport) among youth. Few longitudinal studies have examined the impact of the road environment on physical activity among children/adolescents in their neighborhoods. Participants were children aged 8–9 years (n=170) and adolescents aged 13–15 years (n=276) in 2004. Data were collected in 2004 and 2006 during followup of participants recruited initially in 2001 from 19 primary schools in Melbourne, Australia. Walking/cycling to local destinations was parent-reported for children and self-reported by adolescents. Moderate-to-vigorous physical activity (MVPA) during nonschool hours was recorded using accelerometers. Road environment features in each participant’s neighborhood (area within 800 m radius of their home) were measured objectively using a Geographical Information System. Linear regression analyses examined associations between road features and changes in active transport (AT) and MVPA over 2 years. Children’s AT increased but MVPA levels decreased in both age groups; on average, younger girls recorded the greatest declines. The number of traffic/pedestrian lights was associated with ΔAT among younger girls (B=0.45, p=0.004). The total length of walking tracks (in meters) was associated with ΔAT among younger girls (B=0.0016, p=0.015) and adolescent girls (B=0.0016, p=0.002). For adolescent boys, intersection density was associated with ΔAT (B=0.03, p=0.030). Slow points were associated with ΔMVPA among younger boys before school (B=1.55, p=0.021), while speed humps were associated with ΔMVPA among adolescent boys after school (B=0.23, p=0.015). There were many associations for adolescent girls: for example, the total length of local roads (B=0.49, p=0.005), intersection density (B=0.05, p=0.036), and number of speed humps (B=0.33, p=0.020) were associated with ΔMVPA during nonschool hours. Safety-related aspects of the built environment are conducive to physical activity among youth and may help stem age-related declines in physical activity. Passive road safety interventions may promote AT and physical activity among less active girls, in particular.

Road environment modeling using robust perspective analysis and recursive Bayesian segmentation

Recently, vision-based advanced driver-assistance systems (ADAS) have received a new increased interest to enhance driving safety. In particular, due to its high performance–cost ratio, mono-camera systems are arising as the main focus of this field of work. In this paper we present a novel on-board road modeling and vehicle detection system, which is a part of the result of the European I-WAY project. The system relies on a robust estimation of the perspective of the scene, which adapts to the dynamics of the vehicle and generates a stabilized rectified image of the road plane. This rectified plane is used by a recursive Bayesian classi- fier, which classifies pixels as belonging to different classes corresponding to the elements of interest of the scenario. This stage works as an intermediate layer that isolates subsequent modules since it absorbs the inherent variability of the scene. The system has been tested on-road, in different scenarios, including varied illumination and adverse weather conditions, and the results have been proved to be remarkable even for such complex scenarios.

Rural and remote road safety study : final report

• Introduction: Concern and action for rural road safety is relatively new in Australia in comparison to the field of traffic safety as a whole. In 2003, a program of research was begun by the Centre for Accident Research and Road Safety - Queensland (CARRS-Q) and the Rural Health Research Unit (RHRU) at James Cook University to investigate factors contributing to serious rural road crashes in the North Queensland region. This project was funded by the Premier’s Department, Main Roads Department, Queensland Transport, QFleet, Queensland Rail, Queensland Ambulance Service, Department of Natural Resources and Queensland Police Service. Additional funding was provided by NRMA Insurance for a PhD scholarship. In-kind support was provided through the four hospitals used for data collection, namely Cairns Base Hospital, The Townsville Hospital, Mount Isa Hospital and Atherton Hospital.----- The primary aim of the project was to: Identify human factors related to the occurrence of serious traffic incidents in rural and remote areas of Australia, and to the trauma suffered by persons as a result of these incidents, using a sample drawn from a rural and remote area in North Queensland.----- The data and analyses presented in this report are the core findings from two broad studies: a general examination of fatalities and casualties from rural and remote crashes for the period 1 March 2004 until 30 June 2007, and a further linked case-comparison study of hospitalised patients compared with a sample of non-crash-involved drivers.----- • Method: The study was undertaken in rural North Queensland, as defined by the Australian Bureau of Statistics (ABS) statistical divisions of North Queensland, Far North Queensland and North-West Queensland. Urban areas surrounding Townsville, Thuringowa and Cairns were not included. The study methodology was centred on serious crashes, as defined by a resulting hospitalisation for 24 hours or more and/or a fatality. Crashes meeting this criteria within the North Queensland region between 1 March 2004 and 30 June 2007 were identified through hospital records and interviewed where possible. Additional data was sourced from coroner’s reports, the Queensland Transport road crash database, the Queensland Ambulance Service and the study hospitals in the region.----- This report is divided into chapters corresponding to analyses conducted on the collected crash and casualty data.----- Chapter 3 presents an overview of all crashes and casualties identified during the study period. Details are presented in regard to the demographics and road user types of casualties; the locations, times, types, and circumstances of crashes; along with the contributing circumstances of crashes.----- Chapter 4 presents the results of summary statistics for all casualties for which an interview was able to be conducted. Statistics are presented separately for drivers and riders, passengers, pedestrians and cyclists. Details are also presented separately for drivers and riders crashing in off-road and on-road settings. Results from questionnaire data are presented in relation to demographics; the experience of the crash in narrative form; vehicle characteristics and maintenance; trip characteristics (e.g. purpose and length of journey; periods of fatigue and monotony; distractions from driving task); driving history; alcohol and drug use; medical history; driving attitudes, intentions and behaviour; attitudes to enforcement; and experience of road safety advertising.----- Chapter 5 compares the above-listed questionnaire results between on-road crash-involved casualties and interviews conducted in the region with non-crash-involved persons. Direct comparisons as well as age and sex adjusted comparisons are presented.----- Chapter 6 presents information on those casualties who were admitted to one of the study hospitals during the study period. Brief information is given regarding the demographic characteristics of these casualties. Emergency services’ data is used to highlight the characteristics of patient retrieval and transport to and between hospitals. The major injuries resulting from the crashes are presented for each region of the body and analysed by vehicle type, occupant type, seatbelt status, helmet status, alcohol involvement and nature of crash. Estimates are provided of the costs associated with in-hospital treatment and retrieval.----- Chapter 7 describes the characteristics of the fatal casualties and the nature and circumstances of the crashes. Demographics, road user types, licence status, crash type and contributing factors for crashes are presented. Coronial data is provided in regard to contributing circumstances (including alcohol, drugs and medical conditions), cause of death, resulting injuries, and restraint and helmet use.----- Chapter 8 presents the results of a comparison between casualties’ crash descriptions and police-attributed crash circumstances. The relative frequency of contributing circumstances are compared both broadly within the categories of behavioural, environmental, vehicle related, medical and other groupings and specifically for circumstances within these groups.----- Chapter 9 reports on the associated research projects which have been undertaken on specific topics related to rural road safety.----- Finally, Chapter 10 reports on the conclusions and recommendations made from the program of research.---- • Major Recommendations : From the findings of these analyses, a number of major recommendations were made: + Male drivers and riders - Male drivers and riders should continue to be the focus of interventions, given their very high representation among rural and remote road crash fatalities and serious injuries.----- - The group of males aged between 30 and 50 years comprised the largest number of casualties and must also be targeted for change if there is to be a meaningful improvement in rural and remote road safety.----- + Motorcyclists - Single vehicle motorcycle crashes constitute over 80% of serious, on-road rural motorcycle crashes and need particular attention in development of policy and infrastructure.----- - The motorcycle safety consultation process currently being undertaken by Queensland Transport (via the "Motorbike Safety in Queensland - Consultation Paper") is strongly endorsed. As part of this process, particular attention needs to be given to initiatives designed to reduce rural and single vehicle motorcycle crashes.----- - The safety of off-road riders is a serious problem that falls outside the direct responsibility of either Transport or Health departments. Responsibility for this issue needs to be attributed to develop appropriate policy, regulations and countermeasures.----- + Road safety for Indigenous people - Continued resourcing and expansion of The Queensland Aboriginal Peoples and Torres Strait Islander Peoples Driver Licensing Program to meet the needs of remote and Indigenous communities with significantly lower licence ownership levels.----- - Increased attention needs to focus on the contribution of geographic disadvantage (remoteness) factors to remote and Indigenous road trauma.----- + Road environment - Speed is the ‘final common pathway’ in determining the severity of rural and remote crashes and rural speed limits should be reduced to 90km/hr for sealed off-highway roads and 80km/hr for all unsealed roads as recommended in the Austroads review and in line with the current Tasmanian government trial.----- - The Department of Main Roads should monitor rural crash clusters and where appropriate work with local authorities to conduct relevant audits and take mitigating action. - The international experts at the workshop reviewed the data and identified the need to focus particular attention on road design management for dangerous curves. They also indicated the need to maximise the use of audio-tactile linemarking (audible lines) and rumble strips to alert drivers to dangerous conditions and behaviours.----- + Trauma costs - In accordance with Queensland Health priorities, recognition should be given to the substantial financial costs associated with acute management of trauma resulting from serious rural and remote crashes.----- - Efforts should be made to develop a comprehensive, regionally specific costing formula for road trauma that incorporates the pre-hospital, hospital and post-hospital phases of care. This would inform health resource allocation and facilitate the evaluation of interventions.----- - The commitment of funds to the development of preventive strategies to reduce rural and remote crashes should take into account the potential cost savings associated with trauma.----- - A dedicated study of the rehabilitation needs and associated personal and healthcare costs arising from rural and remote road crashes should be undertaken.----- + Emergency services - While the study has demonstrated considerable efficiency in the response and retrieval systems of rural and remote North Queensland, relevant Intelligent Transport Systems technologies (such as vehicle alarm systems) to improve crash notification should be both developed and evaluated.----- + Enforcement - Alcohol and speed enforcement programs should target the period between 2 and 6pm because of the high numbers of crashes in the afternoon period throughout the rural region.----- + Drink driving - Courtesy buses should be advocated and schemes such as the Skipper project promoted as local drink driving countermeasures in line with the very high levels of community support for these measures identified in the hospital study.------ - Programs should be developed to target the high levels of alcohol consumption identified in rural and remote areas and related involvement in crashes.----- - Referrals to drink driving rehabilitation programs should be mandated for recidivist offenders.----- + Data requirements - Rural and remote road crashes should receive the same quality of attention as urban crashes. As such, it is strongly recommended that increased resources be committed to enable dedicated Forensic Crash Units to investigate rural and remote fatal and serious injury crashes.----- - Transport department records of rural and remote crashes should record the crash location using the national ARIA area classifications used by health departments as a means to better identifying rural crashes.----- - Rural and remote crashes tend to be unnoticed except in relatively infrequent rural reviews. They should receive the same level of attention and this could be achieved if fatalities and fatal crashes were coded by the ARIA classification system and included in regular crash reporting.----- - Health, Transport and Police agencies should collect a common, minimal set of data relating to road crashes and injuries, including presentations to small rural and remote health facilities.----- + Media and community education programmes - Interventions seeking to highlight the human contribution to crashes should be prioritised. Driver distraction, alcohol and inappropriate speed for the road conditions are key examples of such behaviours.----- - Promotion of basic safety behaviours such as the use of seatbelts and helmets should be given a renewed focus.----- - Knowledge, attitude and behavioural factors that have been identified for the hospital Brief Intervention Trial should be considered in developing safety campaigns for rural and remote people. For example challenging the myth of the dangerous ‘other’ or ‘non-local’ driver.----- - Special educational initiatives on the issues involved in rural and remote driving should be undertaken. For example the material used by Main Roads, the Australian Defence Force and local initiatives.

The effect of road lane width on cyclist safety in urban areas

Research has shown that road lane width impacts on driver behaviour. This literature review provides guidelines to assist in the design, construction and retrofitting of urban roads to accommodate road users' safety requirements. It focuses on the impacts of lane widths on cyclists and motor vehicle safety behaviour. The literature review commenced with a search of library databases. Peer reviewed articles and road authority (local, state and national) reports were reviewed. The majority of studies investigating the effects of lane width on driver behaviour were simulator based, while research into cycling safety involved data collected from actual traffic environments. Results show that marked road lane width influences perceived task difficulty, risk perception and possibly speed choice. The positioning of cyclists in traffic lanes is influenced by the presence of on-road cycling facilities and the total roadway width. The lateral displacement between bicycle and vehicle is smallest when a bicycle facility is present. Lower, or reduced, vehicle speeds play a significant role in improving bicyclist and pedestrian safety. It is also shown that if road lane widths in urban areas were reduced, to a functional width that was less than the current guidelines of 3.5m, it could result in a safer road environment for all road users.

The role of cultural beliefs in contributing to risky road use behaviour in Pakistan

Background Pakistan has the highest population rate of road fatalities in South Asia (25.3 fatalities per 100,000 people: Global Status Report on Road Safety, WHO 2009). Along with road environment and vehicle factors, human factors make a substantial contribution to traffic safety in Pakistan. Beliefs about road crash causation and prevention have been demonstrated to contribute to risky road use behaviour and resistance to preventive measures in a handful of other developing countries, but has not been explored in Pakistan. In particular, fatalism (whether based on religion, other cultural beliefs or experience) has been highlighted as a barrier to achieving changes in attitudes and behaviour. Aims The research reported here aimed (i) to explore perceptions of road crash causation among policy makers, police officers, professional drivers and car drivers in Pakistan; (ii) to identify how cultural and religious beliefs influence road use behaviour in Pakistan; and (iii) to understand how fatalistic beliefs may work as obstacles to road safety interventions. Methods In-depth interviews were conducted by the primary author (mostly in Urdu) in Lahore, Rawalpindi and Islamabad with 12 professional drivers (taxi, bus and truck), 4 car drivers, 6 police officers, 4 policy makers and 2 religious orators. All but two were Muslim, two were female, and they were drawn from a wide range of ages (24 to 60) and educational backgrounds. The interviews were taped and transcribed, then translated into English and analysed for themes related to the aims. Results Fatalism emerged as a pervasive belief utilised to justify risky road use behaviour and to resist messages about preventive measures. There was a strong religious underpinning to the statement of fatalistic beliefs (this reflects popular conceptions of Islam rather than scholarly interpretations), but also an overlap with superstitious beliefs which have longer-standing roots in Pakistani culture. These beliefs were not limited to people of poor educational background or position. A particular issue which was explored in more detail was the way in which these beliefs and their interpretation within Pakistani society contributed to poor police reporting of crashes. Discussion and conclusions The pervasive nature of fatalistic beliefs in Pakistan affects road user behaviour by supporting continued risk taking behaviour on the road, and by interfering with public health messages about behaviours which would reduce the risk of traffic crashes. The widespread influence of these beliefs on the ways that people respond to traffic crashes and the death of family members contribute to low crash reporting rates and to a system which is difficult to change. The promotion of an evidence-based approach to road user behaviour is recommended, along with improved professional education for police and policy makers.

Adsorption of heavy metals by road deposited solids

The research study discussed in the paper investigated the adsorption/desorption behaviour of heavy metals commonly deposited on urban road surfaces, namely, Zn, Cu, Cr and Pb for different particle size ranges of solids. The study outcomes, based on field studies and batch experiments confirmed that road deposited solids particles contain a significantly high amount of vacant charge sites with the potential to adsorb additional heavy metals. Kinetic study and adsorption experiments indicated that Cr is the most preferred metal element to associate with solids due to the relatively high electro negativity and high charge density of trivalent cation (Cr3+). However, the relatively low availability of Cr in the urban road environment could influence this behaviour. Comparing total adsorbed metals present in solids particles, it was found that Zn has the highest capacity for adsorption to solids. Desorption experiments confirmed that a low concentration of Cu, Cr and Pb in solids was present in water-soluble and exchangeable form, whilst a significant fraction of adsorbed Zn has a high likelihood of being released back into solution. Among heavy metals, Zn is considered to be the most commonly available metal among road surface pollutants.

A qualitative investigation of older pedestrian views of influences on their road crossing safety

With Australia’s population rapidly ageing, older pedestrian safety has begun to receive greater attention from road safety researchers. However, reliance on simulator studies and observational techniques has limited current understanding of why older pedestrians adopt particular crossing behaviours, and how they perceive crossing the road. The current study aimed to investigate the psychological factors that may contribute to older pedestrians’ crash risk by examining their perceptions of the issues they encounter on the road. Qualitative semi-structured interviews with 18 pedestrians aged 55 years and older were conducted, and the interview transcripts underwent thematic analysis. From this analysis, four key themes emerged. Firstly, the physical design of the road was perceived as posing a significant threat for older pedestrians, particularly sloped, semi-mountable kerbs and designated crossings. Secondly, declines in older pedestrians’ confidence in their ability to cross the road were evident through fewer reported risks being taken. Additionally, older pedestrians sensed an increased threat from other road users when crossing the road, particularly from drivers and cyclists. Finally, older pedestrians referred to the informal rules and strategies used to guide their road crossing. The results suggest that the road environment is perceived as increasingly dangerous and hazardous environment for older pedestrians. Implications regarding the physical road design in areas with an existing high proportion of elderly people are discussed.

Fatalism, superstition, religion, and culture : road user beliefs and behaviour in Pakistan

Road traffic crashes have emerged as a major health problem around the world. Road crash fatalities and injuries have been reduced significantly in developed countries, but they are still an issue in low and middle-income countries. The World Health Organization (WHO, 2009) estimates that the death toll from road crashes in low- and middle-income nations is more than 1 million people per year, or about 90% of the global road toll, even though these countries only account for 48% of the world's vehicles. Furthermore, it is estimated that approximately 265,000 people die every year in road crashes in South Asian countries and Pakistan stands out with 41,494 approximately deaths per year. Pakistan has the highest rate of fatalities per 100,000 population in the region and its road crash fatality rate of 25.3 per 100,000 population is more than three times that of Australia's. High numbers of road crashes not only cause pain and suffering to the population at large, but are also a serious drain on the country's economy, which Pakistan can ill-afford. Most studies identify human factors as the main set of contributing factors to road crashes, well ahead of road environment and vehicle factors. In developing countries especially, attention and resources are required in order to improve things such as vehicle roadworthiness and poor road infrastructure. However, attention to human factors is also critical. Human factors which contribute to crashes include high risk behaviours like speeding and drink driving, and neglect of protective behaviours such as helmet wearing and seat belt wearing. Much research has been devoted to the attitudes, beliefs and perceptions which contribute to these behaviours and omissions, in order to develop interventions aimed at increasing safer road use behaviours and thereby reducing crashes. However, less progress has been made in addressing human factors contributing to crashes in developing countries as compared to the many improvements in road environments and vehicle standards, and this is especially true of fatalistic beliefs and behaviours. This is a significant omission, since in different cultures in developing countries there are strong worldviews in which predestination persists as a central idea, i.e. that one's life (and death) and other events have been mapped out and are predetermined. Fatalism refers to a particular way in which people regard the events that occur in their lives, usually expressed as a belief that an individual does not have personal control over circumstances and that their lives are determined through a divine or powerful external agency (Hazen & Ehiri, 2006). These views are at odds with the dominant themes of modern health promotion movements, and present significant challenges for health advocates who aim to avert road crashes and diminish their consequences. The limited literature on fatalism reveals that it is not a simple concept, with religion, culture, superstition, experience, education and degree of perceived control of one's life all being implicated in accounts of fatalism. One distinction in the literature that seems promising is the distinction between empirical and theological fatalism, although there are areas of uncertainty about how well-defined the distinction between these types of fatalism is. Research into road safety in Pakistan is scarce, as is the case for other South Asian countries. From the review of the literature conducted, it is clear that the descriptions given of the different belief systems in developing countries including Pakistan are not entirely helpful for health promotion purposes and that further research is warranted on the influence of fatalism, superstition and other related beliefs in road safety. Based on the information available, a conceptual framework is developed as a means of structuring and focusing the research and analysis. The framework is focused on the influence of fatalism, superstition, religion and culture on beliefs about crashes and road user behaviour. Accordingly, this research aims to provide an understanding of the operation of fatalism and related beliefs in Pakistan to assist in the development and implementation of effective and culturally appropriate interventions. The research examines the influence of fatalism, superstition, religious and cultural beliefs on risky road use in Pakistan and is guided by three research questions: 1. What are the perceptions of road crash causation in Pakistan, in particular the role of fatalism, superstition, religious and cultural beliefs? 2. How does fatalism, superstition, and religious and cultural beliefs influence road user behaviour in Pakistan? 3. Do fatalism, superstition, and religious and cultural beliefs work as obstacles to road safety interventions in Pakistan? To address these questions, a qualitative research methodology was developed. The research focused on gathering data through individual in-depth interviewing using a semi-structured interview format. A sample of 30 participants was interviewed in Pakistan in the cities of Lahore, Rawalpindi and Islamabad. The participants included policy makers (with responsibility for traffic law), experienced police officers, religious orators, professional drivers (truck, bus and taxi) and general drivers selected through a combination of purposive, criterion and snowball sampling. The transcripts were translated from Urdu and analysed using a thematic analysis approach guided by the conceptual framework. The findings were divided into four areas: attribution of crash causation to fatalism; attribution of road crashes to beliefs about superstition and malicious acts; beliefs about road crash causation linked to popular concepts of religion; and implications for behaviour, safety and enforcement. Fatalism was almost universally evident, and expressed in a number of ways. Fate was used to rationalise fatal crashes using the argument that the people killed were destined to die that day, one way or another. Related to this was the sense of either not being fully in control of the vehicle, or not needing to take safety precautions, because crashes were predestined anyway. A variety of superstitious-based crash attributions and coping methods to deal with road crashes were also found, such as belief in the role of the evil eye in contributing to road crashes and the use of black magic by rivals or enemies as a crash cause. There were also beliefs related to popular conceptions of religion, such as the role of crashes as a test of life or a source of martyrdom. However, superstitions did not appear to be an alternative to religious beliefs. Fate appeared as the 'default attribution' for a crash when all other explanations failed to account for the incident. This pervasive belief was utilised to justify risky road use behaviour and to resist messages about preventive measures. There was a strong religious underpinning to the statement of fatalistic beliefs (this reflects popular conceptions of Islam rather than scholarly interpretations), but also an overlap with superstitious and other culturally and religious-based beliefs which have longer-standing roots in Pakistani culture. A particular issue which is explored in more detail is the way in which these beliefs and their interpretation within Pakistani society contributed to poor police reporting of crashes. The pervasive nature of fatalistic beliefs in Pakistan affects road user behaviour by supporting continued risk taking behaviour on the road, and by interfering with public health messages about behaviours which would reduce the risk of traffic crashes. The widespread influence of these beliefs on the ways that people respond to traffic crashes and the death of family members contribute to low crash reporting rates and to a system which appears difficult to change. Fate also appeared to be a major contributing factor to non-reporting of road crashes. There also appeared to be a relationship between police enforcement and (lack of) awareness of road rules. It also appears likely that beliefs can influence police work, especially in the case of road crash investigation and the development of strategies. It is anticipated that the findings could be used as a blueprint for the design of interventions aimed at influencing broad-spectrum health attitudes and practices among the communities where fatalism is prevalent. The findings have also identified aspects of beliefs that have complex social implications when designing and piloting driver intervention strategies. By understanding attitudes and behaviours related to fatalism, superstition and other related concepts, it should be possible to improve the education of general road users, such that they are less likely to attribute road crashes to chance, fate, or superstition. This study also underscores the understanding of this issue in high echelons of society (e.g., policy makers, senior police officers) as their role is vital in dispelling road users' misconceptions about the risks of road crashes. The promotion of an evidence or scientifically-based approach to road user behaviour and road safety is recommended, along with improved professional education for police and policy makers.

Adsorption of heavy metals by road deposited solids

The research study discussed in the paper investigated the adsorption/desorption behaviour of heavy metals commonly deposited on urban road surfaces, namely, Zn, Cu, Cr and Pb for different particle size ranges of solids. The study outcomes, based on field studies and batch experiments confirmed that road deposited solids particles contain a significantly high amount of vacant charge sites with the potential to adsorb additional heavy metals. Kinetic studies and adsorption experiments indicated that Cr is the most preferred metal element to associate with solids due to the relatively high electro negativity and high charge density of trivalent cation (Cr3+). However, the relatively low availability of Cr in the urban road environment could influence this behaviour. Comparing total adsorbed metals present in solids particles, it was found that Zn has the highest capacity for adsorption to solids. Desorption experiments confirmed that a low concentration of Cu, Cr and Pb in solids was present in water-soluble and exchangeable form, whilst a significant fraction of adsorbed Zn has a high likelihood of being released back into solution. Among heavy metals, Zn is considered to be the most commonly available metal among road surface pollutants.

Building an augmented map for road risk assessment

Recent road safety statistics show that the decades-long fatalities decreasing trend is stopping and stagnating. Statistics further show that crashes are mostly driven by human error, compared to other factors such as environmental conditions and mechanical defects. Within human error, the dominant error source is perceptive errors, which represent about 50% of the total. The next two sources are interpretation and evaluation, which accounts together with perception for more than 75% of human error related crashes. Those statistics show that allowing drivers to perceive and understand their environment better, or supplement them when they are clearly at fault, is a solution to a good assessment of road risk, and, as a consequence, further decreasing fatalities. To answer this problem, currently deployed driving assistance systems combine more and more information from diverse sources (sensors) to enhance the driver's perception of their environment. However, because of inherent limitations in range and field of view, these systems' perception of their environment remains largely limited to a small interest zone around a single vehicle. Such limitations can be overcomed by increasing the interest zone through a cooperative process. Cooperative Systems (CS), a specific subset of Intelligent Transportation Systems (ITS), aim at compensating for local systems' limitations by associating embedded information technology and intervehicular communication technology (IVC). With CS, information sources are not limited to a single vehicle anymore. From this distribution arises the concept of extended or augmented perception. Augmented perception allows extending an actor's perceptive horizon beyond its "natural" limits not only by fusing information from multiple in-vehicle sensors but also information obtained from remote sensors. The end result of an augmented perception and data fusion chain is known as an augmented map. It is a repository where any relevant information about objects in the environment, and the environment itself, can be stored in a layered architecture. This thesis aims at demonstrating that augmented perception has better performance than noncooperative approaches, and that it can be used to successfully identify road risk. We found it was necessary to evaluate the performance of augmented perception, in order to obtain a better knowledge on their limitations. Indeed, while many promising results have already been obtained, the feasibility of building an augmented map from exchanged local perception information and, then, using this information beneficially for road users, has not been thoroughly assessed yet. The limitations of augmented perception, and underlying technologies, have not be thoroughly assessed yet. Most notably, many questions remain unanswered as to the IVC performance and their ability to deliver appropriate quality of service to support life-saving critical systems. This is especially true as the road environment is a complex, highly variable setting where many sources of imperfections and errors exist, not only limited to IVC. We provide at first a discussion on these limitations and a performance model built to incorporate them, created from empirical data collected on test tracks. Our results are more pessimistic than existing literature, suggesting IVC limitations have been underestimated. Then, we develop a new CS-applications simulation architecture. This architecture is used to obtain new results on the safety benefits of a cooperative safety application (EEBL), and then to support further study on augmented perception. At first, we confirm earlier results in terms of crashes numbers decrease, but raise doubts on benefits in terms of crashes' severity. In the next step, we implement an augmented perception architecture tasked with creating an augmented map. Our approach is aimed at providing a generalist architecture that can use many different types of sensors to create the map, and which is not limited to any specific application. The data association problem is tackled with an MHT approach based on the Belief Theory. Then, augmented and single-vehicle perceptions are compared in a reference driving scenario for risk assessment,taking into account the IVC limitations obtained earlier; we show their impact on the augmented map's performance. Our results show that augmented perception performs better than non-cooperative approaches, allowing to almost tripling the advance warning time before a crash. IVC limitations appear to have no significant effect on the previous performance, although this might be valid only for our specific scenario. Eventually, we propose a new approach using augmented perception to identify road risk through a surrogate: near-miss events. A CS-based approach is designed and validated to detect near-miss events, and then compared to a non-cooperative approach based on vehicles equiped with local sensors only. The cooperative approach shows a significant improvement in the number of events that can be detected, especially at the higher rates of system's deployment.

Beyond the barriers : road construction safety issues from the office and the roadside

Conceptually, the management of safety at roadworks can be seen in a three level framework. At the regulatory level, roadworks operate at the interface between the work environment, governed by workplace health and safety regulations, and the road environment, which is subject to road traffic regulations and practices. At the organizational level, national, state and local governments plan and purchase road construction and maintenance which are then delivered in-house or tendered out to large construction companies who often subcontract multiple smaller companies to supply services and labor. At the operational level, roadworks are difficult to isolate from the general public, hindering effective occupational health and safety controls. This study, from the State of Queensland, Australia, examines how well this tripartite framework functions. It includes reviews of organizational policy and procedures documents; interviews with 24 subject matter experts from various road construction and maintenance organizations, and on-site interviews with 66 road construction personnel. The study identified several factors influencing the translation of safety policies into practice including the cost of safety measures in the context of competitive tendering, lack of firm evidence of the effectiveness of safety measures, and pressures to minimize disruption to the travelling public.

A road safety strategy for Norfolk Island, an Australian external territory

Norfolk Island is an Australian external territory in Oceania. The significant road safety reforms in Australia from the 1970s onward bypassed the island, and most road safety ‘silver bullets’ adopted in other Australian jurisdictions were not introduced. While legislative amendments in 2010 introduced mandatory seat belt wearing for vehicle occupants on Norfolk Island, other critical issues face the community including drink driving by residents and visitors, occupant protection for vehicle passengers, and the provision of a more protective road environment. The release of the first Norfolk Island road safety strategy 2014-2016 proposed, inter alia: • a lower BAC of 0.05 and the introduction of compulsory driver alcohol and drug testing by police; • targeted enforcement of occupant protection for vehicle passengers, particularly for passengers riding on vehicle tray backs; • education interventions to challenge values held by some members of the community that support unsafe road use; • ensuring that driver information, training and testing is adequate for all drivers; • identification and rectification of hazardous roadside infrastructure, particularly barrier protection at “high drop locations” within the road network; and • developing a specification for vehicle standards for vehicles imported into Norfolk Island. Norfolk Island is engaging in a process of integration with the Australian community, and wider issues relating to funding and resources have impacted on the implementation of the road safety strategy. The response to the strategy will be discussed, particularly in terms of current attempts to address drink driving and the provision of a safer road environment.

Road Dust from Pavement Wear and Traction Sanding

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is road dust . The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: i) How do traction sanding and physical properties of the traction sand aggregate affect formation of road dust? ii) How do studded tires affect the formation of road dust when compared with friction tires? iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland? iv) What is the size distribution of abrasion particles from tire-road interaction? The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the pavement aggregate. Therefore particles from both aggregates are observed. The mass size distribution of traction sand and pavement wear particles was mainly coarse, but fine and submicron particles were also present.

Neighborhood road environments and physical activity among youth : the CLAN Study

We examined associations between objective measures of the local road environment and physical activity (including active transport) among youth. There is little empirical evidence of the impact of the road environment on physical activity among children/adolescents in their neighborhoods. Most recent studies have examined perceptions rather than objective measures of the road environment. This was a cross-sectional study of children aged 8–9 years (n = 188) and adolescents aged 13–15 years (n  = 346) who were participants in the 3-year follow-up of the Children Living in Active Neighborhoods (CLAN) longitudinal study in Melbourne, Australia. At baseline (2001), they were recruited from 19 state primary schools in areas of varying socioeconomic status across Melbourne. Habitual walking/cycling to local destinations was parent-reported for children and self-reported for adolescents, while moderate-to-vigorous physical activity (MVPA) outside school hours was recorded using accelerometers. Road environment features in each participant’s neighborhood (area of radius 800 m around the home) were measured objectively using a geographical information system. Regression analyses found no associations between road environment variables and children’s likelihood of making at least seven walking/cycling trips per week to neighborhood destinations. Adolescent girls residing in neighborhoods with two to three traffic/pedestrian lights were more likely to make seven or more walking/cycling trips per week as those whose neighborhoods had fewer traffic lights (OR: 2.7; 95% CI: 1.2–6.2). For adolescent boys, residing on a cul-de-sac, compared with a through road, was associated with increases in MVPA of 9 min after school, 5 min in the evenings, and 22 min on weekend days. Speed humps were positively associated with adolescent boys’ MVPA during evenings. The road environment influences physical activity among youth in different ways, according to age group, sex and type of physical activity.