999 resultados para Rio Parana Formation
Resumo:
Ages of zircon from sedimentary samples of Rio Parana Formation, belonging of Bauru Group, north of Parana Basin, Brazil, has been determined by zircon Fission Track and U-Th-Pb in situ dating methods. The obtained ages are from same zircon grain that provided information on the source areas for the sediments and the morphotectonic events.
Resumo:
The six peculiar multicusped teeth described here were collected from sediments of the Upper Cretaceous of Sao Jose do Rio Preto Formation, near Ibira (northeastern Sao Paulo, Brazil). Their bulbous crowns are slightly labio-lingual compressed, and bear a main plus two accessory cusps, which conceal a well developed cingulum. Wear facets are seen on the main and distal accessory cusps. Comparison to the known Crocodyliformes with multicusped teeth show that the new material is not referable to ""protosuchians"" or eusuchians, nor related to two unnamed forms from Morocco and ""notosuchians"" such as Uruguaysuchus, Chiamaerasuchus, and Simosuchus. On the other hand, possible affinities with Candidodon and Malawisuchus were maintained based on shared traits. This includes teeth with the main cusp and some accessory cusps arranged in more than one axis, a previously defined unambiguous apomorphy of the putative clade composed of Candidodon plus Malawisuchus. The term Candidodontidae can be applied to this group, and defined as all taxa closer to Candidodon itapecuruensis than to Notosuchus terrestris, Uruguaysuchus aznarezi, Comahuesuchus brachybuccalis, Sphagesaurus huenei, Baurusuchus pachecoi, and Crocodylus niloticus. (C) 2009 Elsevier Ltd. All rights reserved.
Resumo:
Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
To date, published studies of alluvial bar architecture in large rivers have been restricted mostly to case studies of individual bars and single locations. Relatively little is known about how the depositional processes and sedimentary architecture of kilometre-scale bars vary within a multi-kilometre reach or over several hundreds of kilometres downstream. This study presents Ground Penetrating Radar and core data from 11, kilometre-scale bars from the Rio Parana, Argentina. The investigated bars are located between 30km upstream and 540km downstream of the Rio Parana - Rio Paraguay confluence, where a significant volume of fine-grained suspended sediment is introduced into the network. Bar-scale cross-stratified sets, with lengths and widths up to 600m and thicknesses up to 12m, enable the distinction of large river deposits from stacked deposits of smaller rivers, but are only present in half the surface area of the bars. Up to 90% of bar-scale sets are found on top of finer-grained ripple-laminated bar-trough deposits. Bar-scale sets make up as much as 58% of the volume of the deposits in small, incipient mid-channel bars, but this proportion decreases significantly with increasing age and size of the bars. Contrary to what might be expected, a significant proportion of the sedimentary structures found in the Rio Parana is similar in scale to those found in much smaller rivers. In other words, large river deposits are not always characterized by big structures that allow a simple interpretation of river scale. However, the large scale of the depositional units in big rivers causes small-scale structures, such as ripple sets, to be grouped into thicker cosets, which indicate river scale even when no obvious large-scale sets are present. The results also show that the composition of bars differs between the studied reaches upstream and downstream of the confluence with the Rio Paraguay. Relative to other controls on downstream fining, the tributary input of fine-grained suspended material from the Rio Paraguay causes a marked change in the composition of the bar deposits. Compared to the upstream reaches, the sedimentary architecture of the downstream reaches in the top ca 5m of mid-channel bars shows: (i) an increase in the abundance and thickness (up to metre-scale) of laterally extensive (hundreds of metres) fine-grained layers; (ii) an increase in the percentage of deposits comprised of ripple sets (to >40% in the upper bar deposits); and (iii) an increase in bar-trough deposits and a corresponding decrease in bar-scale cross-strata (<10%). The thalweg deposits of the Rio Parana are composed of dune sets, even directly downstream from the Rio Paraguay where the upper channel deposits are dominantly fine-grained. Thus, the change in sedimentary facies due to a tributary point-source of fine-grained sediment is primarily expressed in the composition of the upper bar deposits.
Resumo:
Neoplecostomus paranensis Langeam, 1990, from the upper Rio Parana, is the only Neoplecostomus species described in this basin and is distinguished from its congeners by the lack or reduction of the adipose fin. Neoplecostomus specimens with a normal and always present adipose fin were caught in the Rio Corumba, upper Rio Parana basin. In the present study two samples of populations, one from a tributary of Rio Paranapanema (identified as a typical N. paranensis) and the other from the Rio Corumba were compared through allozyme electrophoresis. Six diagnostic loci were found, Acp-A, Adh-A, Est-A, Gpi-A, Ldh-A and Ldh-B. In addition, the locus Gpi-B showed significant differences between allelic frequencies for the two samples. Nei's genetic identity between the populations was 0.731. The expressive genetic divergence together with the presence of an adipose fin show that the sample from the Rio Corumba is distinct from N. paranensis and probably represents a new species. (C) 2003 Published by Elsevier Ltd.
Resumo:
The ichthyofauna of 24 stretches of streams, all of 100 m length and of fifth or lower order and most of second and third order, were sampled along four left bank tributaries (Rio do Peixe, Rio Aguapei, Rio Sao Jose dos Dourados, lower Rio Tiete of the main channel of the Rio Parana in the state of São Paulo, southeastern Brazil. Sampling of the fish fauna at each of the six sites in the four basins incorporated a standardized fish collecting methodology and a standardized documentation of environmental data serving as the basis for a comparative analysis of the collecting locations. The 8,189 fish specimens collected represented six orders, 18 families, 42 genera, and 56 species, with a total biomass of 28.8 kg. Approximately 52% of the collected species were characiforms, 28% siluriforms, 9% gymnotiforms, 5% cyprinodontiforms, 4% perciforms, and 2% synbranchiforms. The most abundant of the species were the characiforms Astyanax altiparanae (15% of total) and Knodus moenkhausii (12% of total). The two species with the largest overall biomasses were A. altiparanae (34% of total biomass) and the siluriform Hypostomus sp. (8% of total biomass). Analysis of the trophic structure of the studied ichthyofauna indicated that the 10 numerically dominant species across the 24 sampled streams can be grouped into five guilds that are in decreasing order of numerical importance: omnivores, insectivores, insectivores/invertivores, periphytivores, and algivores. Species richness in the sampled stream stretches varied from six to 20 species with an average richness of 14. The species richness estimated by extrapolation for all 24 sampled stream stretches was 67 species. The Characidae are predominant among the collected specimens with approximately 50% of both individuals and biomass, a fact hypothesized to be a function of several attributes typical of the family. Six of the 56 collected species were new to science and six other species are of indefinite taxonomic status and require further analysis in order to determine their identity.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Neoplecostomus paranensis was the only Neoplecostomus species known from the upper Rio Parana basin, and it was diagnosed from its congeners mainly by the absence or reduction of the adipose fin. In this study we describe three new Neoplecostomus species. All of them are promptly differentiated from N. paranensis by having a well-developed adipose fin. Furthermore, the new species are differentiated from congeners by morphometric and meristic traits, in addition to color pattern. Neoplecostomus paranensis is redescribed. We also provide an identification key to all Neoplecostomus species.
Resumo:
Hemigrammus parana is described from the upper rio Parana system, in the area of influence of the Ilha Solteira reservoir in states of Mato Grosso do Sul, Minas Gerais and São Paulo, southeastern Brazil. The new species differs from all congeners by the combination of the following characters: absence of humeral spot; presence of a roughly triangular or rectangular conspicuous black caudal spot, extending from base to tip of middle caudal-fin rays, its greatest depth at base of caudal-fin rays; and anal-fin rays iii-iv, 18-23.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)