969 resultados para Resíduo de construção e demolição (RCD)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The construction industry is responsible for generating a lot of waste because of their activities. Consequently, it is noticeable the occurrence of environmental problems in terms of its disposal in inappropriate places. Faced with this problem, some studies have been conducted with the aim of developing technologies and alternatives for recycling construction and demolition waste (CDW), motivated by the scarcity of natural resources and reduction of environmental problems generated. The research aims to characterize the recycled aggregates derived from construction and demolition waste (CDW) produced in the Greater Natal-RN and analyze the performance of mortar coating produced with recycled aggregates. The study includes the chemical , physical and microstructural characterization of recycled aggregates , as well as conducting microscopic analysis and laboratory tests in the fresh state (consistency index , water retention , bulk density and content of entrained air ) and in the hardened state ( compressive strength , tensile strength in bending , water absorption by immersion and capillary , mass density and void ratio ) for mortars produced from different levels of substitution of aggregates ( 0, 20 %, 40 %, 60 %, 80 % and 100 %). The results were satisfactory, providing mortars produced with recycled aggregates, smaller mass density and dynamic modulus values as well as an increase in the rates of absorption and porosity. The tensile strength in bending and compression for TP1 (1:2:8) trait were lower for mortars produced with recycled aggregates and the best result was 20% for replacement. For the TP2 (1:8) mapping, there was an increase in resistance to traction and compression and the best result was for 100% replacement of natural aggregates by recycled. The experiments led to the conclusion that the technical and economic point of view that the mortars produced with recycled aggregates can be used in construction, only if there is an effective control in production processes of recycled aggregate and at the dosage of mortars

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Surveys carried out in many Brazilian cities have shown that the CDW Construction and Demolition Waste, in some cases, represent more than 50% of the mass of urban solid residue. Municipalities have struggled to manage in an effective way huge quantities of CDW generated every day and solve the problem of the illegal dumping in an inadequate area, which compromise the quality of life of the population as a whole, thus causing serious problems concerning social-environmental and sanitary. This paperwork was meant it carry out environmental diagnosis of the management and the final destination of the CDW in the city of Parnamirim/RN. The methodology used in this work constituted in the bibliographical research, conducted to give support and fundaments to the subject in question, identification of the main places of legal and illegal dumping, identification of the environmental impacts caused by the irregular deposition of the CDW, valuation of quantity and quality of the CDW and perception according to the Environmental Legislation. The necessary data for the elaboration of this study were carried out through the appliance of questionnaires with open and closed questions, applied to 14 (fourteen) Real Estate developer companies associated with SINDUSCON/RN and 05 companies that deal with the transportation and collection of CDW, formal and informal interviews, exploitational visits and photographical records. The collected data went through a statistic treatment being organized into tables and graphs. The main results obtained from this research show that the interviewees hold a medium knowledge of the specific Environmental Legislation; do not have an effective model of environmental management, resorting to only reusing CDW; that the reusing of CDW is not substantial, as much as the possibility of recycling has a minimal consideration. It was also verified that a considerable percentage of interviewees affirmed to send CDW to illegal and inadequate locations. It is expected that such study can be used as an important tool to subsidize the public administration in the pursuit of solutions which could bring benefits to society and the environment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Geociências e Meio Ambiente - IGCE

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Programa de Pós-Graduação em Geotecnia, 2016.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de Mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Esta dissertação foi desenvolvida tendo como objetivo principal quantificar e qualificar a produção dos Resíduos de Construção e Demolição (RCD) na Região Autónoma da Madeira (RAM). Estes resíduos são provenientes de atividades de construção civil, nomeadamente de obras de construção, reconstrução, ampliação, alteração, conservação e demolição e da derrocada de edificações. Os RCD devem ser, sempre que possível, reduzidos, reutilizados e/ou reciclados (3 R’s). Caso não seja exequível a aplicação direta em obra de um dos 3 R’s, estes deverão ser encaminhados para um operador de gestão licenciado com o intuito de os valorizar e/ou eliminar. Uma das opções mais usuais de eliminação de resíduos na RAM é a deposição legal em aterro. No entanto, ainda há resíduos que têm como destino a deposição não controlada, causando a degradação geral do ambiente da Região. Neste trabalho foram identificados os vários operadores de gestão de resíduos presentes na Região Autónoma da Madeira e quais os destinos finais de cada resíduo, classificado por código de acordo com a Lista Europeia de Resíduos (LER), segundo a Portaria n.º209/2004, de 3 de março. A informação da quantidade dos resíduos encaminhados para os operadores licenciados é transmitida, anualmente, à Direção Regional do Ordenamento do Território e Ambiente (DROTA), sendo possível determinar a tipologia e a quantidade de resíduos recebidos com respetivo destino final. Foi analisada bibliografia nacional e internacional sobre RCD com o objetivo de selecionar indicadores, em kg/m2 (quantidade de resíduos produzidos por área bruta de construção/demolição), mais ajustados às caraterísticas do edificado regional e respetivos processos construtivos. Da comparação entre os valores estimados de RCD produzidos com a quantidade de resíduos recebidos pelos operadores licenciados na RAM, foi possível estimar as quantidades recicladas e reutilizadas em obra e/ou depositadas ilegalmente. O resíduo estudado mais produzido foi o referente ao código LER 170107. Foi ainda, estimado um intervalo de produção total de RCD para a RAM, situado entre 93 e 507 kg/ano/habitante.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Mestre em Engenharia Civil

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this work was collect information of articles published previously and carry out a study about them, including contents and interesting stuff that bring growth regarding the construction residues utilization and demolition (RCD), that today provides many environmental impacts. The need of utilization of the RCD in Brazil and in the world earned bigger attention world speaking, therefore the industry of the civil construction is had as one of the biggest present residues output springs. For it present a point that can be applied the RCD, is discussed in that work the kinds and structures of floors, where are presented the layers and, finally, a short argument about the possible and economic feasabilities job of the residues recycled in some layers of the structure of floor

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Civil - FEIS

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Two of the major problems caused by construction activity are the production of construction and demolition waste (CDW) and the exploitation of mineral resources, causing big impacts on the environment. Therefore, the recycling has been shown as an alternative to mitigate the harmful effects of waste on the urban environment and prevent the exploitation of new raw materials. This course work aims to study the behavior of recycled aggregates from Vale do Paraíba in concrete and mortar. Initially, it presents the definitions of recycled aggregates according to CONAMA Resolution No. 307/2002, the aggregate settings for concrete and mortar (such as the grain size, its origin and density, and the characterization parameters according to ABNT), and the definition of ACI method of concrete mix design. Afterwards, it presents the characterization of materials separated by assays. After that, it shows the theoretical concrete proportioning applying the ACI method and experimental concrete proportioning. Then, the analysis of results is performed to finally conclude that the materials provided can't be used to replace natural aggregates because they cannot have the same performance. With the studies, it could be observed that the recycled aggregate presents a great complexity and diversity in origin, therefore the form how the material should be handled requires great care

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Two of the major problems caused by construction activity are the production of construction and demolition waste (CDW) and the exploitation of mineral resources, causing big impacts on the environment. Therefore, the recycling has been shown as an alternative to mitigate the harmful effects of waste on the urban environment and prevent the exploitation of new raw materials. This course work aims to study the behavior of recycled aggregates from Vale do Paraíba in concrete and mortar. Initially, it presents the definitions of recycled aggregates according to CONAMA Resolution No. 307/2002, the aggregate settings for concrete and mortar (such as the grain size, its origin and density, and the characterization parameters according to ABNT), and the definition of ACI method of concrete mix design. Afterwards, it presents the characterization of materials separated by assays. After that, it shows the theoretical concrete proportioning applying the ACI method and experimental concrete proportioning. Then, the analysis of results is performed to finally conclude that the materials provided can't be used to replace natural aggregates because they cannot have the same performance. With the studies, it could be observed that the recycled aggregate presents a great complexity and diversity in origin, therefore the form how the material should be handled requires great care