Structural performance of reinforced concrete beams repairing from spalling

The effectiveness of a repair work for the restoration of spalled reinforced concrete (r.c.) structures depends to a great extent, on their ability to restore the structural integrity of the r.c. element, to restore its serviceability and to protect the reinforcements from further deterioration. This paper presents results of a study concocted to investigate the structural performance of eight spalled r.c. beams repaired using two advanced repair materials in various zones for comparison purposes, namely a free flowing self compacting mortar (FFSCM) and a polymer Modified cementitious mortar (PMCM). The repair technique adopted was that for the repair of spalled concrete in which the bond between the concrete and steel was completely lost due to reinforcement corrosion or the effect of fire or impact. The beams used for the experiment were first cast, then hacked at various zones before they were repaired except for the control beam. The beam specimens were then loaded to failure under four point loadings. The structural response of each beam was evaluated in terms of first crack load, cracking behavior, crack pattern, deflection, variation of strains in the concrete and steel, collapse load and the modes of failure. The results of the test showed that, the repair materials applied on the various zones of the beams were able to restore more than 100% of the beams’ capacity and that FFSCM gave a better overall performance.

Restorative justice: Making amends, repairing relationships and healing

Since the late 1970s, there has been a significant expansion in techniques for using mediated interactions between offenders and those affected by their behaviour. This trend began with juvenile justice conferencing, family group conferencing and Indigenous sentencing circles. The umbrella term used to describe these techniques and processes is ‘restorative justice’ (‘RJ’ to its fans and practitioners).Two important catalysts for this expansion were an increased awareness of the marginalisation of victims in the criminal justice system, and concerns over climbing recidivism rates.

Incorporation of human recombinant tropoelastin into silk fibroin membranes with the view to repairing Bruch’s membrane

Bombyx mori silk fibroin membranes provide a potential delivery vehicle for both cells and extracellular matrix (ECM) components into diseased or injured tissues. We have previously demonstrated the feasibility of growing retinal pigment epithelial cells (RPE) on fibroin membranes with the view to repairing the retina of patients afflicted with age-related macular degeneration (AMD). The goal of the present study was to investigate the feasibility of incorporating the ECM component elastin, in the form of human recombinant tropoelastin, into these same membranes. Two basic strategies were explored: (1) membranes prepared from blended solutions of fibroin and tropoelastin; and (2) layered constructs prepared from sequentially cast solutions of fibroin, tropoelastin, and fibroin. Optimal conditions for RPE attachment were achieved using a tropoelastin-fibroin blend ratio of 10 to 90 parts by weight. Retention of tropoelastin within the blend and layered constructs was confirmed by immunolabelling and Fourier-transform infrared spectroscopy (FTIR). In the layered constructs, the bulk of tropoelastin was apparently absorbed into the initially cast fibroin layer. Blend membranes displayed higher elastic modulus, percentage elongation, and tensile strength (p < 0.01) when compared to the layered constructs. RPE cell response to fibroin membranes was not affected by the presence of tropoelastin. These findings support the potential use of fibroin membranes for the co-delivery of RPE cells and tropoelastin.

双面二维硅微条探测器的沾污失效分析及修复；Contamination failure analysis and repairing for double side two dimensional silicon microstrip detectors

硅微条探测器通过微电子工艺制作,易因沾污导致性能下降甚至失效;裸露的键合引线,也易因机械力形成隐性或显性失效。对上述现象的研究可用于修复、维护探测器并在设计和工艺流程中改进其性能。本文通过光学、电气手段分析其结构和制作工艺流程,根据沾污性质在不同条件下清洗探测器,中测后根据芯片图形、封装方式和电气要求修复探测器,最后采用同位素α能谱测试修复效果。对一块沾污后失效(无法加载偏压)的硅微条清洗后在大气环境,N面接地,P面加载负偏压条件下进行了测试,结果显示:170 V全耗尽,平均漏电流2.94μA,5.486 MeV的α峰能量分辨率约1.28%。失效键合所在条的另一面各条能谱观测到假峰,键合修复后消除。因沾污失效的硅微条探测器经过合适的清洗、修复,部分可以恢复性能,但清洗对表面和结构有损伤,须谨慎。另外,键合失效后,因信号不能引出导致的电荷积累会通过电容效应影响其它灵敏区。文章提示,探测器应存放于洁净,恒温,低湿度,避光,避强电磁干扰的环境,以提高能量和位置分辨率,并增加工作稳定性,延长使用寿命。

Repairing Learned Knowledge Using Experience

Explanation-based learning occurs when something useful is retained from an explanation, usually an account of how some particular problem can be solved given a sound theory. Many real-world explanations are not based on sound theory, however, and wrong things may be learned accidentally, as subsequent failures will likely demonstrate. In this paper, we describe ways to isolate the facts that cause failures, ways to explain why those facts cause problems, and ways to repair learning mistakes. In particular, our program learns to distinguish pails from cups after making a few mistakes.

Repairing wireless sensor network connectivity in damaged environments

A wireless sensor network can become partitioned due to node failure, requiring the deployment of additional relay nodes in order to restore network connectivity. This introduces an optimisation problem involving a tradeoff between the number of additional nodes that are required and the costs of moving through the sensor field for the purpose of node placement. This tradeoff is application-dependent, influenced for example by the relative urgency of network restoration. In addition, minimising the number of relay nodes might lead to long routing paths to the sink, which may cause problems of data latency. This data latency is extremely important in wireless sensor network applications such as battlefield surveillance, intrusion detection, disaster rescue, highway traffic coordination, etc. where they must not violate the real-time constraints. Therefore, we also consider the problem of deploying multiple sinks in order to improve the network performance. Previous research has only parts of this problem in isolation, and has not properly considered the problems of moving through a constrained environment or discovering changes to that environment during the repair or network quality after the restoration. In this thesis, we firstly consider a base problem in which we assume the exploration tasks have already been completed, and so our aim is to optimise our use of resources in the static fully observed problem. In the real world, we would not know the radio and physical environments after damage, and this creates a dynamic problem where damage must be discovered. Therefore, we extend to the dynamic problem in which the network repair problem considers both exploration and restoration. We then add a hop-count constraint for network quality in which the desired locations can talk to a sink within a hop count limit after the network is restored. For each new problem of the network repair, we have proposed different solutions (heuristics and/or complete algorithms) which prioritise different objectives. We evaluate our solutions based on simulation, assessing the quality of solutions (node cost, movement cost, computation time, and total restoration time) by varying the problem types and the capability of the agent that makes the repair. We show that the relative importance of the objectives influences the choice of algorithm, and different speeds of movement for the repairing agent have a significant impact on performance, and must be taken into account when selecting the algorithm. In particular, the node-based approaches are the best in the node cost, and the path-based approaches are the best in the mobility cost. For the total restoration time, the node-based approaches are the best with a fast moving agent while the path-based approaches are the best with a slow moving agent. For a medium speed moving agent, the total restoration time of the node-based approaches and that of the path-based approaches are almost balanced.

Note from the Port Dalhousie and Thorold Railway to Mrs. E. Parnell with prices for digging a well, moving a hog pen and repairing a fence

Note from the Port Dalhousie and Thorold Railway to Mrs. E. Parnell with prices for digging a well, moving a hog pen and repairing a fence, n.d.

Receipt from Tiffany and Co., New York for repairing 2 lace pins

Receipt from Tiffany and Co., New York for repairing 2 lace pins, Oct. 24, 1884.

A self-repairing, supramolecular polymer system: healability as a consequence of donor-acceptor pi-pi stacking interactions

A novel supramolecular polymer system, in which the terminal pyrenyl groups of a polyamide intercalate into the chain-folds of a polyimide via electronically-complementary pi-pi stacking, shows both enhanced mechanical properties relative to those of its individual components and facile healing characteristics as a result of the thermoreversibility of non-covalent interactions.

Does repairing a cleft lip neonatally have any effect on the longer-term attractiveness of the repair?

Objective: To determine whether attractiveness and success of surgical outcome differ according to the timing of cleft lip repair. Design: Three experiments were conducted: (1) surgeons rated postoperative medical photographs of infants having either neonatal or 3-month lip repair; (2) lay panelists rated the same photographs; (3) lay panelists rated dynamic video displays of the infants made at 12 months. Normal comparison infants were also rated. The order of stimuli was randomized, and panelists were blind to timing of lip repair and the purposes of the study. Setting: Four U.K. regional centers for cleft lip and palate. Participants: Infants with isolated clefts of the lip, with and without palate. Intervention: Early lip repair was conducted at median age 4 days (inter-quartile range [IQR] = 4), and late repair at 104 days (IQR = 57). Main Outcome Measures: Ratings of surgical outcome (Experiment 1 only) and attractiveness (all experiments) on 5-point Likert scales. Results: In Experiment 1 success of surgical outcome was comparable for early and late repair groups (difference = -0.08; 95% confidence interval [CI] = -0.43 to 0.28; p = .66). In all three experiments, attractiveness ratings were comparable for the two groups. Differences were, respectively, 0.10 (95% CI = -2.3 to 0.44, p = .54); -0.11 (95% CI = -0.42 to -0.19, p = .54); and 0.08 (95% CI = -0.11 to 0.28, p =.41). Normal infants were rated more attractive than index infants (difference = 0.38; 95% CI = 0.24 to 0.52; p < .001). Conclusion: Neonatal repair for cleft of the lip confers no advantage over repair at 3 months in terms of perceived infant attractiveness or success of surgical outcome.

Repairing the rupture : restorative justice and the rehabilitation of offenders

Restorative justice is a social justice movement that aims to deal with consequences of crime through repairing and restoring relationships of three key stakeholders: victims, offenders, and communities. Unfortunately, it is often unclear where offender rehabilitation fits within the constructs of repair and reintegration that drive this justice paradigm. An analysis of the relationship between restorative justice theory and offender rehabilitation principles reveals tensions between the two normative frameworks and a lack of appreciation that correctional treatment programs have a legitimate role alongside restorative practices. First, we outline the basic tenets of the Risk–Need–Responsivity Model and the Good Lives Model in order to provide a brief overview of two recent models of offender rehabilitation. We then consider the claims made by restorative justice proponents about correctional rehabilitation programs and their role in the criminal justice system. We conclude that restorative justice and rehabilitation models are distinct, although overlapping, normative frameworks and have different domains of application in the criminal justice system, and that it is a mistake to attempt to blend them in any robust sense.