285 resultados para Reologia da coalhada
Resumo:
Mestrado em Biotecnologia, Faculdade de Engenharia de Recursos Naturais, Univ. do Algarve, 2005
Resumo:
Dissertação efectuada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia de Materiais
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais
Resumo:
Além do ferro ser muito pouco absorvido pelo organismo poucos alimentos contêm ferro em quantidade considerável. Assim, faz-se necessário estudar meios de enriquecimento estratégico de alguns alimentos. O aumento do teor de ferro no leite mediante um processo de coagulação poderia ser de utilidade visando obter um produto nutricionalmente mais completo. O ferro, na forma de Fe(NH4)2(SO4) 2.6H2O, foi adicionado ao leite de vaca em dosagens de 15, 20 e 25mg de Fe/100ml e sua concentração determinada na coalhada dessorada e no soro. Foi observado que a maior parte de ferro adicionado ao leite fica retida na coalhada dessorada em um proporção superior a 70% para as três dosagens estudadas e que conforme a quantidade de ferro adicionado aumenta, a taxa de retenção também aumenta, exceto para a dosagem mais elevada.
Resumo:
O comportamento reológico do açúcar líquido invertido com inversão de 59,68% e 89,88% foi estudado experimentalmente nas temperaturas de 17°C a 65°C, utilizando um reômetro rotacional de cilindros concêntricos. Os resultados mostraram que o açúcar líquido invertido apresenta comportamento Newtoniano na faixa de temperatura estudada. O efeito da temperatura na viscosidade foi expresso por relações do tipo Arrhenius, cujos coeficientes de correlação foram superiores a 0,99 e as energias de ativação apresentaram valores de 70,5kJ.mol-1 e 86,5kJ.mol-1 para as soluções com inversão de 59,68% e 89,88%, respectivamente.
Resumo:
Neste trabalho foi determinado o comportamento reológico do suco industrializado de acerola, mediante um reômetro de cilindros concêntricos, em concentrações de sólidos solúveis de 4, 7, 10, 13 e 16ºBrix e no intervalo de temperatura de 5ºC a 85ºC. Os dados experimentais dos reogramas foram ajustados aos modelos reológicos de Ostwald-de-Waele, Herschel-Bulkley, Mizrahi & Berk e Casson. O modelo de Herschel-Bulkley descreveu adequadamente o comportamento reológico do suco industrializado de acerola. Os baixos valores obtidos para o índice de comportamento (0,338 < n hb < 0,759) confirmaram o comportamento pseudoplástico do suco. O efeito da temperatura no comportamento reológico do suco de acerola foi descrito por uma equação análoga a de Arrhenius (etaa = eta0 exp(Eat/RT)). Foi observado que a energia de ativação diminuiu com o aumento da concentração das amostras, expressa em sólidos solúveis, variando desde 3,50kcal/gmol, para as amostras a 4ºBrix, até 1,79kcal/gmol, para as amostras a 16ºBrix. Os dados da viscosidade aparente e da concentração de sólidos solúveis foram ajustados aos modelos potencial e exponencial. O modelo potencial mostrou ser o mais adequado para descrever o efeito da concentração sobre a viscosidade aparente do suco de acerola.
Resumo:
A caprinocultura de leite tem sido apontada como uma alternativa econômica para as pequenas propriedades rurais, sendo que a produção de queijo pode aumentar a lucratividade devido ao valor agregado ao produto. No entanto, os animais apresentam uma estacionalidade produtiva, ou seja, em alguns períodos há abundância e em outros, escassez de leite. O congelamento do leite ou de coalhadas dessoradas para a produção de queijo consiste numa alternativa para contornar o problema. O objetivo do trabalho foi avaliar um queijo obtido de massa mole com coagulação mista, maturado pelo fungo Penicillium candidum utilizando-se leite congelado pelos processos lento (freezer comum) ou rápido (nitrogênio líquido) e a fabricação do mesmo queijo utilizando-se coalhada dessorada e congelada pelos mesmos processos. Verificou-se que os queijos resultantes do congelamento do leite e congelamento da coalhada pelos processos lento e rápido não diferiram dos queijos controle (sem congelamento) quanto ao rendimento, características físico-químicas, composição e aspectos microbiológicos, mesmo quando comparados aos resultados obtidos na matéria seca do queijo.
Resumo:
Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer
Resumo:
Milk goats are indicated as an economic alternative for small farmers and cheese making could improve their profits. Goat's milk has a seasonal production characteristic and shows periods of abundance and others of scarcity. The use of frozen milk or frozen curd to make cheese can be used to solve the problem. The aim of this work was to evaluate the preparation of cheese made from mixed curd and ripened by Penicillium candidum mould using slow frozen milk (in a domestic freezer) or fast frozen milk (by liquid nitrogen). The slow frozen curd and fast frozen curd without whey were used. It was observed that the cheese from the slow and fast frozen milk and from the slow and fast frozen curd did not differ from the control cheese for the yield, chemicophysical characteristics, chemical composition, extention ripened rate, depth ripened rate and microbiological aspects, even when it was expressed as a dry matter content of cheeses.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE
Resumo:
Pós-graduação em Medicina Veterinária - FMVZ