986 resultados para Rendiment industrial -- Models economètrics
Aplicación del DEA en el análisis de beneficios en un sistema integrado verticalmente hacia adelante
Resumo:
En el presente trabajo se diseñan tres modelos DEA a partir de un sistema de producción cuyos componentes están colocados en un arreglo en serie que se integran verticalmente hacia adelante. El primer modelo busca optimizar los beneficios del sistema agregado, así como la mejora de los mismos en cada uno de los subsistemas. En el segundo de los modelos, además del objetivo anterior, se incluyen restricciones de transferencia de los recursos específicos asociados a cada subsistema, y en el tercer modelo se estima el intervalo de variación para los precios de transferencia de los inputs intermedios entre ambos subsistemas. Los modelos han sido programados y simulados en el software GAMS a partir de datos generados por una función de producción Cobb-Douglas para los inputs intermedios y los outputs finales.
Resumo:
This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12
Resumo:
The relationship between competition and performance-related pay has been analyzed in single-principal-single-agent models. While this approach yields good predictions for managerial pay schemes, the predictions fail to apply for employees at lower tiers of a firm's hierarchy. In this paper, a principal-multi-agent model of incentive pay is developed which makes it possible to analyze the effect of changes in the competitiveness of markets on lower tier incentive payment schemes. The results explain why the payment schemes of agents located at low and mid tiers are less sensitive to changes in competition when aggregated firm data is used. Journal of Economic Literature classiffication numbers: D82, J21, L13, L22. Keywords: Cournot Competition, Contract Delegation, Moral Hazard, Entry, Market Size, Wage Cost.
Resumo:
Empirical studies on the determinants of industrial location typically use variables measured at the available administrative level (municipalities, counties, etc.). However, this amounts to assuming that the effects these determinants may have on the location process do not extent beyond the geographical limits of the selected site. We address the validity of this assumption by comparing results from standard count data models with those obtained by calculating the geographical scope of the spatially varying explanatory variables using a wide range of distances and alternative spatial autocorrelation measures. Our results reject the usual practice of using administrative records as covariates without making some kind of spatial correction. Keywords: industrial location, count data models, spatial statistics JEL classification: C25, C52, R11, R30
Resumo:
This paper considers the estimation of the geographical scope of industrial location determinants. While previous studies impose strong assumptions on the weighting scheme of the spatial neighbour matrix, we propose a exible parametrisation that allows for di fferent (distance-based) de finitions of neighbourhood and di fferent weights to the neighbours. In particular, we estimate how far can reach indirect marginal e ffects and discuss how to report them. We also show that the use of smooth transition functions provides tools for policy analysis that are not available in the traditional threshold modelling. Keywords: count data models, industrial location, smooth transition functions, threshold models. JEL-Codes: C25, C52, R11, R30.
Resumo:
[cat] En aquest treball, es realitza una nova estimació del VAB industrial espanyol a un nivell de desagregació territorial corresponent a les províncies (NUTSIII) i les Comunitats Autònomes (NUTS II). Per assolir aquest objectiu es planteja una nova metodologia d’estimació de les xifres històriques de VAB industrial regional. Front a les aproximacions tradicionals, basades en la utilització de fonts fiscals com a forma d’aproximar la capacitat productiva industrial, en aquest treball s’ofereix una estimació que també es basa en les rendes generades per la producció industrial de les regions. Amb aquest objectiu, es fa servir la metodologia proposada per Geary i Stark (2002) i les millores proposades per Crafts (2005). La utilització d’aquesta metodologia permet elaborar una nova estimació retrospectiva del VAB industrial de les regions espanyoles a diversos talls temporals corresponents al període 1860-1930.
Resumo:
[cat] En aquest treball, es realitza una nova estimació del VAB industrial espanyol a un nivell de desagregació territorial corresponent a les províncies (NUTSIII) i les Comunitats Autònomes (NUTS II). Per assolir aquest objectiu es planteja una nova metodologia d’estimació de les xifres històriques de VAB industrial regional. Front a les aproximacions tradicionals, basades en la utilització de fonts fiscals com a forma d’aproximar la capacitat productiva industrial, en aquest treball s’ofereix una estimació que també es basa en les rendes generades per la producció industrial de les regions. Amb aquest objectiu, es fa servir la metodologia proposada per Geary i Stark (2002) i les millores proposades per Crafts (2005). La utilització d’aquesta metodologia permet elaborar una nova estimació retrospectiva del VAB industrial de les regions espanyoles a diversos talls temporals corresponents al període 1860-1930.
Resumo:
This paper provides empirical evidence that continuous time models with one factor of volatility, in some conditions, are able to fit the main characteristics of financial data. It also reports the importance of the feedback factor in capturing the strong volatility clustering of data, caused by a possible change in the pattern of volatility in the last part of the sample. We use the Efficient Method of Moments (EMM) by Gallant and Tauchen (1996) to estimate logarithmic models with one and two stochastic volatility factors (with and without feedback) and to select among them.
Resumo:
Empirical studies on industrial location do not typically distinguish between new and relocated establishments. This paper addresses this shortcoming using data on the frequency of these events in municipalities of the same economic-administrative region. This enables us to test not only for differences in their determinants but also for interrelations between start-ups and relocations. Estimates from count regression models for cross-section and panel data show that, although partial effects differ, common patterns arise in “institutional” and “neoclassical” explanatory factors. Also, start-ups and relocations are positive but asymmetrically related. JEL classification: C25, R30, R10. Keywords: cities, count data models, industrial location
Resumo:
In this paper we examine the out-of-sample forecast performance of high-yield credit spreads regarding real-time and revised data on employment and industrial production in the US. We evaluate models using both a point forecast and a probability forecast exercise. Our main findings suggest the use of few factors obtained by pooling information from a number of sector-specific high-yield credit spreads. This can be justified by observing that, especially for employment, there is a gain from using a principal components model fitted to high-yield credit spreads compared to the prediction produced by benchmarks, such as an AR, and ARDL models that use either the term spread or the aggregate high-yield spread as exogenous regressor. Moreover, forecasts based on real-time data are generally comparable to forecasts based on revised data. JEL Classification: C22; C53; E32 Keywords: Credit spreads; Principal components; Forecasting; Real-time data.
Resumo:
This paper presents an analysis of motor vehicle insurance claims relating to vehicle damage and to associated medical expenses. We use univariate severity distributions estimated with parametric and non-parametric methods. The methods are implemented using the statistical package R. Parametric analysis is limited to estimation of normal and lognormal distributions for each of the two claim types. The nonparametric analysis presented involves kernel density estimation. We illustrate the benefits of applying transformations to data prior to employing kernel based methods. We use a log-transformation and an optimal transformation amongst a class of transformations that produces symmetry in the data. The central aim of this paper is to provide educators with material that can be used in the classroom to teach statistical estimation methods, goodness of fit analysis and importantly statistical computing in the context of insurance and risk management. To this end, we have included in the Appendix of this paper all the R code that has been used in the analysis so that readers, both students and educators, can fully explore the techniques described
Resumo:
En aquest article s’estimen models de comportament de la demanda turística alemanya i britànica posant èmfasi a treballar amb la sèrie del deflactor dels preus de l’hostaleria balear, tot evitant fer estimacions amb preus declarats de “paquets” turístics, que tenen l’ inconvenient de no recollir els descomptes reals de darrera hora, especialment importants en el cas del mercat britànic
Resumo:
We provide evidence on the dynamics in firms’ R&D cooperation behaviour. Our main objective is to analyse if R&D collaborative agreements are persistent at the firm level, and in such a case, to study what are the main drivers of this phenomenon. R&D cooperation activities at the firm level can be persistent due to true state dependence, this implying that cooperating in a given period enhances the probability of doing it in the subsequent period and it can also be a consequence of firms’ individual heterogeneity, so that certain firms have certain characteristics that make them more likely to carry out technological alliances.
Resumo:
We provide evidence on the dynamics in firms’ R&D cooperation behaviour. Our main objective is to analyse if R&D collaborative agreements are persistent at the firm level, and in such a case, to study what are the main drivers of this phenomenon. R&D cooperation activities at the firm level can be persistent due to true state dependence, this implying that cooperating in a given period enhances the probability of doing it in the subsequent period and it can also be a consequence of firms’ individual heterogeneity, so that certain firms have certain characteristics that make them more likely to carry out technological alliances.
Resumo:
This paper adopts dynamic factor models with macro-finance predictors to test the intertemporal risk-return relation for 13 European stock markets. We identify country specific, euro area, and global macro-finance factors to determine the conditional risk and return. Empirically, the risk- return trade-off is generally negative. However, a Markov switching model documents that there is time-variation in this trade-off that is linked to the state of the economy. Keywords: Risk-return trade-off; Dynamic factor model; Macro-finance predictors; European stock markets; Markov switching model JEL Classifications: C22; G11; G12; G17