Método monoscópico para a determinação automática da altura de edifícios em fotografias aéreas

This paper proposes a monoscopic method for automatic determination of building's heights in digital photographs areas, based on radial displacement of points in the plan image and geometry at the time the photo is obtained. Determination of the buildings' heights can be used to model the surface in urban areas, urban planning and management, among others. The proposed methodology employs a set of steps to detect arranged radially from the system of photogrammetric coordinates, which characterizes the lateral edges of buildings present in the photo. In a first stage is performed the reduction of the searching area through detection of shadows projected by buildings, generating sub-images of the areas around each of the detected shadow. Then, for each sub-image, the edges are automatically extracted, and tests of consistency are applied for it in order to be characterized as segments of straight arranged radially. Next, with the lateral edges selected and the knowledge of the flight height, the buildings' heights can be calculated. The experimental results obtained with real images showed that the proposed approach is suitable to perform the automatic identification of the buildings height in digital images.

Determinação automática da altura de edifícios em imagens aéreas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Extração semi-automática de edificações com análise do modelo numérico de elevações

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digital Vertical Aerial Camera System for High-resolution Site Inspections in Conservation Easment Monitoring

A three-level satellite to ground monitoring scheme for conservation easement monitoring has been implemented in which high-resolution imagery serves as an intermediate step for inspecting high priority sites. A digital vertical aerial camera system was developed to fulfill the need for an economical source of imagery for this intermediate step. A method for attaching the camera system to small aircraft was designed, and the camera system was calibrated and tested. To ensure that the images obtained were of suitable quality for use in Level 2 inspections, rectified imagery was required to provide positional accuracy of 5 meters or less to be comparable to current commercially available high-resolution satellite imagery. Focal length calibration was performed to discover the infinity focal length at two lens settings (24mm and 35mm) with a precision of O.1mm. Known focal length is required for creation of navigation points representing locations to be photographed (waypoints). Photographing an object of known size at distances on a test range allowed estimates of focal lengths of 25.lmm and 35.4mm for the 24mm and 35mm lens settings, respectively. Constants required for distortion removal procedures were obtained using analytical plumb-line calibration procedures for both lens settings, with mild distortion at the 24mm setting and virtually no distortion found at the 35mm setting. The system was designed to operate in a series of stages: mission planning, mission execution, and post-mission processing. During mission planning, waypoints were created using custom tools in geographic information system (GIs) software. During mission execution, the camera is connected to a laptop computer with a global positioning system (GPS) receiver attached. Customized mobile GIs software accepts position information from the GPS receiver, provides information for navigation, and automatically triggers the camera upon reaching the desired location. Post-mission processing (rectification) of imagery for removal of lens distortion effects, correction of imagery for horizontal displacement due to terrain variations (relief displacement), and relating the images to ground coordinates were performed with no more than a second-order polynomial warping function. Accuracy testing was performed to verify the positional accuracy capabilities of the system in an ideal-case scenario as well as a real-world case. Using many welldistributed and highly accurate control points on flat terrain, the rectified images yielded median positional accuracy of 0.3 meters. Imagery captured over commercial forestland with varying terrain in eastern Maine, rectified to digital orthophoto quadrangles, yielded median positional accuracies of 2.3 meters with accuracies of 3.1 meters or better in 75 percent of measurements made. These accuracies were well within performance requirements. The images from the digital camera system are of high quality, displaying significant detail at common flying heights. At common flying heights the ground resolution of the camera system ranges between 0.07 meters and 0.67 meters per pixel, satisfying the requirement that imagery be of comparable resolution to current highresolution satellite imagery. Due to the high resolution of the imagery, the positional accuracy attainable, and the convenience with which it is operated, the digital aerial camera system developed is a potentially cost-effective solution for use in the intermediate step of a satellite to ground conservation easement monitoring scheme.

A framework for automatic feature extraction from airborne light detection and ranging data

Recent advances in airborne Light Detection and Ranging (LIDAR) technology allow rapid and inexpensive measurements of topography over large areas. Airborne LIDAR systems usually return a 3-dimensional cloud of point measurements from reflective objects scanned by the laser beneath the flight path. This technology is becoming a primary method for extracting information of different kinds of geometrical objects, such as high-resolution digital terrain models (DTMs), buildings and trees, etc. In the past decade, LIDAR gets more and more interest from researchers in the field of remote sensing and GIS. Compared to the traditional data sources, such as aerial photography and satellite images, LIDAR measurements are not influenced by sun shadow and relief displacement. However, voluminous data pose a new challenge for automated extraction the geometrical information from LIDAR measurements because many raster image processing techniques cannot be directly applied to irregularly spaced LIDAR points. ^ In this dissertation, a framework is proposed to filter out information about different kinds of geometrical objects, such as terrain and buildings from LIDAR automatically. They are essential to numerous applications such as flood modeling, landslide prediction and hurricane animation. The framework consists of several intuitive algorithms. Firstly, a progressive morphological filter was developed to detect non-ground LIDAR measurements. By gradually increasing the window size and elevation difference threshold of the filter, the measurements of vehicles, vegetation, and buildings are removed, while ground data are preserved. Then, building measurements are identified from no-ground measurements using a region growing algorithm based on the plane-fitting technique. Raw footprints for segmented building measurements are derived by connecting boundary points and are further simplified and adjusted by several proposed operations to remove noise, which is caused by irregularly spaced LIDAR measurements. To reconstruct 3D building models, the raw 2D topology of each building is first extracted and then further adjusted. Since the adjusting operations for simple building models do not work well on 2D topology, 2D snake algorithm is proposed to adjust 2D topology. The 2D snake algorithm consists of newly defined energy functions for topology adjusting and a linear algorithm to find the minimal energy value of 2D snake problems. Data sets from urbanized areas including large institutional, commercial, and small residential buildings were employed to test the proposed framework. The results demonstrated that the proposed framework achieves a very good performance. ^

La déconstruction de l'onto-théologie par Jacques Derrida : détour littéraire et mise en relief de la matrice langagière comme "différance".

Le mouvement derridien de la différance marque la rupture avec l'affirmation de la métaphysique de la présence, avec l'autorité du signifié transcendantal. Dans cet univers mouvant de signifiants qui se renvoient perpétuellement les uns aux autres, la logique d'univocité se disloque. La "présence" n'est que fantomatique, s'esquissant au sein d'une chaîne ininterrompue de signifiants et se laissant toujours creuser par la marque d'un irréductible manque. Face au logocentrisme, corollaire de l'affirmation de la présence, l'écriture se veut siège et articulation de la trace, d'une origine qui ne peut être que raturée, véhicule d'une irrémédiable fêlure. La volet littéraire de la déconstruction a pour but de mettre en évidence le fonctionnement de l'"indécidabilité" du discours, soit une certaine ambivalence dans la signification qui caractérise tout texte. L'objectif principal de la présente recherche est de fournir une compréhension plus approfondie de la déconstruction en insistant sur l'ancrage langagier de tout texte. Le discours philosophique n'échappe ainsi pas au mécanisme différentiel du langage et de la dérive métaphorique. La parenté entre la perspective déconstructiviste derridienne et la conception mallarméenne du langage poétique semble frappante. La mise en oeuvre, par Mallarmé, d'une dislocation de l'espace textuel, son minutieux "creusement" du vers après renoncement à toute quête d'"Idéal", la mise en relief du leurre de l'appropriation langagière, voilà qui trouve un écho particulier dans les thèses derridiennes. La "mimésis" platonicienne se voit au travers du prisme de la "mimique" mallarméenne. La déconstruction poursuit son travail de "luxation" de l'oreille philosophique, insérant les philosophèmes dans la matrice langagière, les livrant ainsi au hasard du cheminement textuel et les confrontant à l'aporie. La philosophie n'a alors d'autre choix que d'abandonner ses prétentions transcendantales. La marche de la "différance" instaure une inexorable distance qui prive le sujet de tout rapport direct avec une origine assurée et lui ôte toute possibilité de maîtrise sur le monde. Au travers de la langue, se profile la question de l'altérité, de la relation dissymétrique qui nous lie à cet "autre", ce "tout-autre" qui nous fonde et nous constitue. L'accueil inconditionnel de cette altérité nous mènera à l'étude de la "religion", la déconstruction se tournant vers le "religieux" tout en effectuant un "retournement" habile de tout credo essentialiste.

La déconstruction de l'onto-théologie par Jacques Derrida : détour littéraire et mise en relief de la matrice langagière comme "différance"

Le mouvement derridien de la différance marque la rupture avec l'affirmation de la métaphysique de la présence, avec l'autorité du signifié transcendantal. Dans cet univers mouvant de signifiants qui se renvoient perpétuellement les uns aux autres, la logique d'univocité se disloque. La "présence" n'est que fantomatique, s'esquissant au sein d'une chaîne ininterrompue de signifiants et se laissant toujours creuser par la marque d'un irréductible manque. Face au logocentrisme, corollaire de l'affirmation de la présence, l'écriture se veut siège et articulation de la trace, d'une origine qui ne peut être que raturée, véhicule d'une irrémédiable fêlure. La volet littéraire de la déconstruction a pour but de mettre en évidence le fonctionnement de l'"indécidabilité" du discours, soit une certaine ambivalence dans la signification qui caractérise tout texte. L'objectif principal de la présente recherche est de fournir une compréhension plus approfondie de la déconstruction en insistant sur l'ancrage langagier de tout texte. Le discours philosophique n'échappe ainsi pas au mécanisme différentiel du langage et de la dérive métaphorique. La parenté entre la perspective déconstructiviste derridienne et la conception mallarméenne du langage poétique semble frappante. La mise en oeuvre, par Mallarmé, d'une dislocation de l'espace textuel, son minutieux "creusement" du vers après renoncement à toute quête d'"Idéal", la mise en relief du leurre de l'appropriation langagière, voilà qui trouve un écho particulier dans les thèses derridiennes. La "mimésis" platonicienne se voit au travers du prisme de la "mimique" mallarméenne. La déconstruction poursuit son travail de "luxation" de l'oreille philosophique, insérant les philosophèmes dans la matrice langagière, les livrant ainsi au hasard du cheminement textuel et les confrontant à l'aporie. La philosophie n'a alors d'autre choix que d'abandonner ses prétentions transcendantales. La marche de la "différance" instaure une inexorable distance qui prive le sujet de tout rapport direct avec une origine assurée et lui ôte toute possibilité de maîtrise sur le monde. Au travers de la langue, se profile la question de l'altérité, de la relation dissymétrique qui nous lie à cet "autre", ce "tout-autre" qui nous fonde et nous constitue. L'accueil inconditionnel de cette altérité nous mènera à l'étude de la "religion", la déconstruction se tournant vers le "religieux" tout en effectuant un "retournement" habile de tout credo essentialiste.

Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Contemporary dramaturgy in theatre for young people : the conceptual shape of displacement and installation

This thesis investigates Theatre for Young People (TYP) as a site of performance innovation. The inquiry is focused on contemporary dramaturgy and its fieldwork aims to identify new dramaturgical principles operating in the creation and presentation of TYP. The research then seeks to assess how these new principles contribute to Postdramatic Theatre theory. This research inquiry springs from an imperative based in practice: Young people under 25 years have a literacy based on online hypertextual experiences which take the reader outside the frames of a dramatic narrative and beyond principles such as linearity, dramatic unity, teleology and resolution. As a dramaturg and educator I wanted to understand the new ways that young people engage in cultural products, to identify and utilize the new principles of dramaturgy that are now in evidence. My research examines how two playwright/directors approach their work and the new principles that can be identified in their dramaturgy. The fieldwork is scoped into two case studies: the first on TJ Eckleberg working in Australian Theatre for Young People and the second on Kristo Šagor working in German Children’s and Young People’s Theatre (KJT). These case studies address both types of production dramaturgy - the dramaturgy emergent through process in devised performance making, and that emergent in a performance based on a written playscript. On Case Study One the researcher, as participant observer, worked as production dramaturg on a large scale, site specific performance, observing the dramaturgy in process of its director and chief devisor. On Case Study Two the researcher, as observer and analyst, undertook a performance analysis of three playscripts and productions by a contemporary German playwright and director. Utilizing participant observation, reflective practice and grounded analysis the case studies have identified two new principles animating the dramaturgy of these TYP practitioners, namely ‘displacement’ and ‘installation.’ Taking practice into theory, the thesis concludes by demonstrating how displacement and installation contribute to Postdramatic Theatre’s “arsenal of expressive gestures which serve as theatre’s response to changed social communication under the conditions of generalized communication technologies” (Lehmann, H.-T., 2006, p.23). This research makes an original contribution to knowledge by evidencing that the principles of Postdramatic Theory lie within the practice of contemporary Theatre for Young People. It also contributes valuable research to a specialized, often overlooked terrain, namely Dramaturgy in Theatre for Young People, presented here with a contemporary, international and intercultural perspective.

Rapid displacement of dengue virus type 1 by type 4, Pacific region, 2007-2009

Since 2000-2001, dengue virus type 1 has circulated in the Pacific region. However, in 2007, type 4 reemerged and has almost completely displaced the strains of type 1. If only 1 serotype circulates at any time and is replaced approximately every 5 years, DENV-3 may reappear in 2012.

Anion induced displacement studies in naphthalene diimide containing interpenetrated and interlocked structures

This article describes investigations into the development of supramolecular systems capable of sensing anions through either displacement type assays or molecular motion. An electron deficient naphthalene diimide thread and electron rich isophthalamide naphthohydroquinone macrocycle was shown to form a coloured pseudorotaxane assembly. Investigations into the ability of such interpenetrated systems to sense anions colorimetrically were undertaken. Anion complexation to the isophthalamide group of the macrocycle causes displacement of the naphthodiimide thread resulting in the loss of colour. The enhanced mechanically bonded binding strength between the naphthodiimide axle and the naphthohydroquinone groups of the macrocycle wheel in the corresponding rotaxane structure however, was found to negate the anion induced displacement process.