Nanofiltration of surface water for the removal of endocrine disruptors

The assessment of surface water nanofiltration (NF) for the removal of endocrine disruptors (EDs) Nonylphenol Ethoxylate (IGEPAL), 4-Nonylphenol (NP) and 4-Octylphenol (OP) was carried out with three commercial NF membranes - NF90, NF200, NF270. The permeation experiments were conducted in laboratory flat-cell units of 13.2 x 10(-4) m(2) of surface area and in a DSS Lab-unit M20 with a membrane surface area of 0.036 m2. The membranes hydraulic permeabilities ranged from 3.7 to 15.6 kg/h/m(2)/bar and the rejection coefficients to NaCl, Na2SO4 and Glucose are for NF90: 97%, 99% and 97%, respectively; for NF200: 66%, 98% and 90%, respectively and for NF270: 48%, 94% and 84%, respectively. Three sets of nanofiltration experiments were carried out: i) NF of aqueous model solutions of NP, IGEPAL and OP running in total recirculation mode; ii) NF of surface water from Rio Sado (Settibal, Portugal) running in concentration mode; iii) NF of surface water from Rio Sado inoculated with NP, IGEPAL and OP running in concentration mode. The results of model solutions experiments showed that the EDs rejection coefficients are approximately 100% for all the membranes. The results obtained for the surface water showed that the rejection coefficients to natural organic Matter (NOM) are 94%, 82% and 78% for NF90, NF200 and NF 270 membranes respectively, with and without inoculation of EDs. The rejection coefficients to EDs in surface water with and without inoculation of EDs are 100%, showing that there is a fraction of NOM of high molecular weight that retains the EDs in the concentrate and that there is a fraction of NOM of low molecular weight that permeates through the NF membranes free of EDs.

Application of principal component analysis in phase-shifting photoelasticity

Principal component analysis phase shifting (PCA) is a useful tool for fringe pattern demodulation in phase shifting interferometry. The PCA has no restrictions on background intensity or fringe modulation, and it is a self-calibrating phase sampling algorithm (PSA). Moreover, the technique is well suited for analyzing arbitrary sets of phase-shifted interferograms due to its low computational cost. In this work, we have adapted the standard phase shifting algorithm based on the PCA to the particular case of photoelastic fringe patterns. Compared with conventional PSAs used in photoelasticity, the PCA method does not need calibrated phase steps and, given that it can deal with an arbitrary number of images, it presents good noise rejection properties, even for complicated cases such as low order isochromatic photoelastic patterns. © 2016 Optical Society of America.

Further evidence on the statistical properties of real GNP

The well-known lack of power of unit root tests has often been attributed to the shortlength of macroeconomic variables and also to DGP s that depart from the I(1)-I(0)alternatives. This paper shows that by using long spans of annual real GNP and GNPper capita (133 years) high power can be achieved, leading to the rejection of both theunit root and the trend-stationary hypothesis. This suggests that possibly neither modelprovides a good characterization of these data. Next, more flexible representations areconsidered, namely, processes containing structural breaks (SB) and fractional ordersof integration (FI). Economic justification for the presence of these features in GNP isprovided. It is shown that the latter models (FI and SB) are in general preferred to theARIMA (I(1) or I(0)) ones. As a novelty in this literature, new techniques are appliedto discriminate between FI and SB models. It turns out that the FI specification ispreferred, implying that GNP and GNP per capita are non-stationary, highly persistentbut mean-reverting series. Finally, it is shown that the results are robust when breaksin the deterministic component are allowed for in the FI model. Some macroeconomicimplications of these findings are also discussed.

Evaluation of Gap-Graded Asphalt Concrete Mixtures, Vol. 1. Physical Properties (Part I: Mechanical Properties), HR-157, Volume 1, 1972 (1973)

This report presents the results of a comparative laboratory study between well- and gap-graded aggregates used in asphalt concrete paving mixtures. A total of 424 batches of asphalt concrete mixtures and 3,960 Marshall and Hveem specimens were examined. There is strong evidence from this investigation that, with proper-combinations of aggregates and asphalts, both continuous- and gap-graded aggregates can produce mixtures of high density and of qualities meeting current design criteria. There is also reason to believe that the unqualified acceptance of some supposedly desirable, constant, mathematical relationship between adjacent particle sizes of the form such as Fuller's curve p = 100(d/D)^n is not justified. It is recommended that the aggregate grading limits be relaxed or eliminated and that the acceptance or rejection of an aggregate for use in asphalt pavement be based on individual mixture evaluation. Furthermore, because of the potential attractiveness of gap-graded asphalt concrete in cost, quality, and skid and wear resistance, selected gap-graded mixtures are recommended for further tests both in the laboratory and in the field, especially in regard to ease of compaction and skid and wear resistance.

Characterising the role of T-cell subsets in experimental allograft rejection and transplantation tolerance

SUMMARY : The recognition by recipient T cells of the allograft major histocompatibility complex (MHC)mismatched antigens is the primary event that ultimately leads to rejection. In the transplantation setting, circulating alloreactive CD4+ T cells play a central role in the initiation and the coordination of the immune response and can initiate the rejection of an allograft via three distinct pathways: the direct, indirect and the recently described semi-direct pathway. However, the exact role of individual CD4+ T-cell subsets in the development of allograft rejection is not clearly defined. Furthermore, besides pathogenic effector T cells, a new subset of T cells with regulatory properties, the CD4+CD25+Foxp3+ (Treg) cells, has come under increased scrutiny over the last decade. The experiments presented in this thesis were designed to better define the phenotype and functional characteristics of CD4+ T-cell subsets and Treg cells in vitro and in vivo in a marine adoptive transfer and skin transplantation model. As Treg cells play a key role in the induction and maintenance of peripheral transplantation tolerance, we have explored whether donor-antigen specific Treg cells could be expanded in vitro. Here we describe a robust protocol for the ex-vivo generation and expansion of antigen-specific Treg cells, without loss of their characteristic phenotype and suppressive function. In our in vivo transplantation model, antigen-specific Treg cells induced donor-specific tolerance to skin allografts in lymphopenic recipients and significantly delayed skin graft rejection in wild-type mice in the absence of any other immunosuppression. Naïve and memory CD4+ T cells have distinct phenotypes, effector functions and in vivo homeostatsis, and thus may play different roles in anti-donor immunity after transplantation. We have analyzed in vitro and in vivo primary alloresponses of naïve and cross-reactive memory CD4+ T cells. We found that the CD4+CD45RBlo memory T-cell pool was heterogeneous and contained cells with regulatory potentials, both in the CD4+CD25+ and CD4+CD25- populations. CD4+ T cells capable of inducing strong primary alloreactive responses in vitro and rejection of a first allograft in vivo were mainly contained within the CD45RBhi naïve CD4+ T-cell compartment. Taken together, the work described in this thesis provides new insights into the mechanisms that drive allograft rejection or donor-specific transplantation tolerance. These results will help to optimise current clinical immunosuppressive regimens used after solid organ transplantation and design new immunotherapeutic strategies to prevent transplant rejection. RÉSUMÉ : ROLE DES SOUS-POPULATIONS DE CELLULES T DANS LE REJET DE GREFFE ET L'INDUCTION DE TOLERANCE EN TRANSPLANTATION La reconnaissance par les cellules T du receveur des alloantigènes du complexe majeur d'histocompatibilité (CMIT) présentés par une greffe allogénique, est le premier événement qui aboutira au rejet de l'organe greffé. Dans le contexte d'une transplantation, les cellules alloréactives T CD4+ circulantes jouent un rôle central dans l'initiation et la coordination de 1a réponse immune, et peuvent initier le rejet par 3 voies distinctes : la voie directe, indirecte et la voie servi-directe, plus récemment décrite. Toutefois, le rôle exact des sous-populations de cellules T CD4+ dans les différentes étapes menant au rejet d'une allogreffe n'est pas clairement établi. Par ailleurs, hormis les cellules T effectrices pathogéniques, une sous-population de cellules T ayant des propriétés régulatrices, les cellules T CD4+CD25+Foxp3+ (Treg), a été nouvellement décrite et est intensément étudiée depuis environ dix ans. Les expériences présentées dans cette thèse ont été planifiées afin de mieux définir le phénotype et les caractéristiques fonctionnels des sous-populations de cellules T CD4+ et des Treg in vitro et in vivo dans un modèle marin de transfert adoptif de cellules et de transplantation de peau. Comme les cellules Treg jouent un rôle clé dans l'induction et le maintien de la tolérance périphérique en transplantation, nous avons investigué la possibilité de multiplier in vitro des cellules Treg avec spécificité antigénique pour le donneur. Nous décrivons ici un protocole reproductible pour la génération et l'expansion ex-vivo de cellules Treg avec spécificité antigénique, sans perte de leur phénotype caractéristique et de leur fonction suppressive. Dans notre modèle in vivo de transplantation de peau, ces cellules Treg pouvaient induire une tolérance spécifique vis-à-vis du donneur chez des souris lymphopéniques, et, chez des souris normales non-lymphopéniques ces Treg ont permis de retarder significativement le rejet en l'absence de tout traitement immunosuppresseur. Les cellules T CD4+ naïves et mémoires se distinguent par leur phénotype, fonction effectrice et leur homéostasie in vivo, et peuvent donc moduler différemment la réponse immune contre le donneur après transplantation. Nous avons analysé in vitro et in vivo les réponses allogéniques primaires de cellules T CD4+ naïves et mémoires non-spécifiques (cross-réactives). Nos résultats ont montré que le pool de cellules T CD4+CD45RB'° mémoires était hétérogène et contenait des cellules avec un potentiel régulateur, aussi bien parmi la sous-population de cellules CD4+CD25+ que CD4+CD25+. Les cellules T CD4+ capables d'induire une alloréponse primaire intense in vitro et le rejet d'une première allogreffe in vivo étaient essentiellement contenues dans le pool de cellules T CD4+CD45RBhi naïves. En conclusion, le travail décrit dans cette thèse amène un nouvel éclairage sur les mécanismes responsables du rejet d'une allogreffe ou de l'induction de tolérance en transplantation. Ces résultats permettront d'optimaliser les traitements immunosuppresseurs utilisés en transplantation clinique et de concevoir des nouvelles stratégies irnmuno-thérapeutiques pour prévenir le rejet de greffe allogénique.

Heterotopic transplantation of glycerin-preserved trachea: effect of respiratory epithelium desquamation on acute rejection

An effective preservation method and decreased rejection are essential for tracheal transplantation in the reconstruction of large airway defects. Our objective in the present study was to evaluate the antigenic properties of glycerin-preserved tracheal segments. Sixty-one tracheal segments (2.4 to 3.1 cm) were divided into three groups: autograft (N = 21), fresh allograft (N = 18) and glycerin-preserved allograft (N = 22). Two segments from different groups were implanted into the greater omentum of dogs (N = 31). After 28 days, the segments were harvested and analyzed for mononuclear infiltration score and for the presence of respiratory epithelium. The fresh allograft group presented the highest score for mononuclear infiltration (1.78 ± 0.43, P <= 0.001) when compared to the autograft and glycerin-preserved allograft groups. In contrast to the regenerated epithelium observed in autograft segments, all fresh allografts and glycerin-preserved allografts had desquamation of the respiratory mucosa. The low antigenicity observed in glycerin segments was probably the result of denudation of the respiratory epithelium and perhaps due to the decrease of major histocompatibility complex class II antigens.

Beyond Panel Unit Root Tests: Using Multiple Testing to Determine the Non Stationarity Properties of Individual Series in a Panel

Most panel unit root tests are designed to test the joint null hypothesis of a unit root for each individual series in a panel. After a rejection, it will often be of interest to identify which series can be deemed to be stationary and which series can be deemed nonstationary. Researchers will sometimes carry out this classification on the basis of n individual (univariate) unit root tests based on some ad hoc significance level. In this paper, we demonstrate how to use the false discovery rate (FDR) in evaluating I(1)=I(0) classifications based on individual unit root tests when the size of the cross section (n) and time series (T) dimensions are large. We report results from a simulation experiment and illustrate the methods on two data sets.

Scaled down physical properties of semiconductor nanowires for nanoelectronics scaling up

Semiconductor nanowires (NWs) are one- or quasi one-dimensional systems whose physical properties are unique as compared to bulk materials because of their nanoscaled sizes. They bring together quantum world and semiconductor devices. NWs-based technologies may achieve an impact comparable to that of current microelectronic devices if new challenges will be faced. This thesis primarily focuses on two different, cutting-edge aspects of research over semiconductor NW arrays as pivotal components of NW-based devices. The first part deals with the characterization of electrically active defects in NWs. It has been elaborated the set-up of a general procedure which enables to employ Deep Level Transient Spectroscopy (DLTS) to probe NW arrays’ defects. This procedure has been applied to perform the characterization of a specific system, i.e. Reactive Ion Etched (RIE) silicon NW arrays-based Schottky barrier diodes. This study has allowed to shed light over how and if growth conditions introduce defects in RIE processed silicon NWs. The second part of this thesis concerns the bowing induced by electron beam and the subsequent clustering of gallium arsenide NWs. After a justified rejection of the mechanisms previously reported in literature, an original interpretation of the electron beam induced bending has been illustrated. Moreover, this thesis has successfully interpreted the formation of NW clusters in the framework of the lateral collapse of fibrillar structures. These latter are both idealized models and actual artificial structures used to study and to mimic the adhesion properties of natural surfaces in lizards and insects (Gecko effect). Our conclusion are that mechanical and surface properties of the NWs, together with the geometry of the NW arrays, play a key role in their post-growth alignment. The same parameters open, then, to the benign possibility of locally engineering NW arrays in micro- and macro-templates.

Imaging properties of scanning equalization digital radiography: A simulation study

We have developed an empirically based simulation system to create images equivalent in SNR and SPR to those that would be acquired with various possible SEDR configurations. This system uses a collection of spot collimated full-field images (SCFFIs) of an anthropomorphic chest phantom, taken at high exposure levels and rescaled in noise and intensity, then digitally collimated and combined to produce the simulated SEDR images. This system allows for the study of design trade-offs between different equalization feedback schemes and scatter rejection geometries in addition to estimating the clinical benefits of SEDR over traditional imaging techniques. Data from this simulation system has demonstrated that SEDR techniques offer potential significant improvements over currently used digital radiography techniques for chest imaging. ^

Physical properties and hexachlorocyclohexane concentrations of sea-ice, water and ice algae samples, eastern Beaufort Sea

We present evidence that both geophysical and thermodynamic conditions in sea ice are important in understanding pathways of accumulation or rejection of hexachlorocyclohexanes (HCHs). a- and g-HCH concentrations and a-HCH enantiomer fractions have been measured in various ice classes and ages from the Canadian High Arctic. Mean a-HCH concentrations reached 0.642 ± 0.046 ng/L in new and young ice (<30 cm), 0.261 ±0.015 ng/L in the first-year ice (30-200 cm) and 0.208 ±0.045 in the old ice (>200 cm). Mean g-HCH concentrations were 0.066 ± 0.006 ng/L in new and young ice, 0.040 ±0.002 ng/L in the first-year ice and 0.040 ±0.007 ng/L in the old ice. In general, a-HCH concentrations and vertical distributions were highly dependent on the initial entrapment of brine and the subsequent desalination process. g-HCH levels and distribution in sea ice were not as clearly related to ice formation processes. During the year, first-year ice progressed from freezing (accumulation) to melting (ablation). Relations between the geophysical state of the sea ice and the vertical distribution of HCHs are described as ice passes through these thermodynamic states. In melting ice, which corresponded to the algal bloom period, the influence of biological processes within the bottom part of the ice on HCH concentrations and a-HCH enantiomer fraction is discussed using both univariate and multivariate approaches.

Biocompatible properties of surgical mesh using an animal model

To study the biocompatibility of surgical meshes for use in pelvic reconstructive surgery using an animal model. Eight different types of mesh: Atrium, Dexon, Gynemesh, IVS tape, Prolene, SPARC tape, TVT tape and Vypro II, were implanted into the abdominal walls of rats for 3 months' duration. Explanted meshes were assessed, using light microscopy, for parameters of rejection and incorporation. Type 1 (Atrium, Gynemesh, Prolene, SPARC and TVT) and type 3 (Vypro II, Dexon and IVS) meshes demonstrated different biocompatible properties. Inflammatory cellular response and fibrosis at the interface of mesh and host tissue was most marked with Vypro II and IVS. All type 1 meshes displayed similar cellular responses despite markedly different mesh architecture. The inflammatory response and fibrous reaction in the non-absorbable type 3 meshes tested (IVS and Vypro II) was more marked than the type 1 meshes. The increased inflammatory and fibrotic response may be because of the multifilamentous polypropylene components of these meshes. Material and filament composition of mesh is the main factor in determining cellular response.

Assessment of biodegradable magnesium alloys for enhanced mechanical and biocompatible properties

Biomaterials have been used for more than a century in the human body to improve body functions and replace damaged tissues. Currently approved and commonly used metallic biomaterials such as, stainless steel, titanium, cobalt chromium and other alloys have been found to have adverse effects leading in some cases, to mechanical failure and rejection of the implant. The physical or chemical nature of the degradation products of some implants initiates an adverse foreign body reaction in the tissue. Some metallic implants remain as permanent fixtures, whereas others such as plates, screws and pins used to secure serious fractures are removed by a second surgical procedure after the tissue has healed sufficiently. However, repeat surgical procedures increase the cost of health care and the possibility of patient morbidity. This study focuses on the development of magnesium based biodegradable alloys/metal matrix composites (MMCs) for orthopedic and cardiovascular applications. The Mg alloys/MMCs possessed good mechanical properties and biocompatible properties. Nine different compositions of Mg alloys/MMCs were manufactured and surface treated. Their degradation behavior, ion leaching, wettability, morphology, cytotoxicity and mechanical properties were determined. Alloying with Zn, Ca, HA and Gd and surface treatment resulted in improved mechanical properties, corrosion resistance, reduced cytotoxicity, lower pH and hydrogen evolution. Anodization resulted in the formation of a distinct oxide layer (thickness 5-10 μm) as compared with that produced on mechanically polished samples (~20-50 nm) under ambient conditions. It is envisaged that the findings of this research will introduce a new class of Mg based biodegradable alloys/MMCs and the emergence of innovative cardiovascular and orthopedic implant devices.^

Evaluation of Transport Properties of Nanofiltration Membranes Exposed to Radioactive Liquid Waste

The application of membrane separation processes (PSM) for treatment of radioactive waste requires the selection of a suitable membrane for the treatment of waste, as the membrane will be directly exposed to the radioactive liquid waste, and also exposed to ionizing radiation. The nanofiltration membrane is most suitable for treatment of radioactive waste, since it has high rejection of multivalent ions. Usually the membranes are made of polymers and depending on the composition of the waste, type and dose of radiation absorbed may be changes in the structure of the membrane, resulting in loss of its transport properties. We tested two commercial nanofiltration membranes: NF and SW Dow/Filmtec. The waste liquid used was obtained in the process of conversion of uranium hexafluoride gas to solid uranium dioxide, known as "carbonated water". The membranes were characterized as their transport properties (hydraulic permeability, permeate flux and salt rejection) before and after their immersion in the waste for 24 hours. The surface of the membranes was also evaluated by SEM and FTIR. It was observed that in both the porosity of the membrane selective layer was altered, but not the membrane surface charge, which is responsible for the selectivity of the membrane. The NF membranes and SW showed uranium ion rejection of 64% and 55% respectively.