Illinois recycled products guide, 1997.

"9/97"--P. 4 of cover.

Opportunities to enhance the purchase of environmentally preferable products : a report to the Illinois General Assembly.

State government purchases a wide array of goods and services, ranging from office supplies to motor vehicles to energy. While purchasing officials are working to get the maximum value out of each dollar they spend, products with reduced environmental impacts are becoming increasingly available in the marketplace to help state agencies meet the challenge of operating more efficiently. Known as environmentally preferable or "green," these products can save energy and water, reduce waste generation and improve the workplace environment. ... This report provides recommendations on steps Illinois state government can take to expand the purchase of products that have a reduced impact on human health and the environment, while maintaining fiscal responsibility. The report was prepared by the Interagency Working Group on Environmentally Preferable Purchasing, which was created by Governor Rod Blagojevich in response to House Resolution 797. The Working Group included representatives of the Capital Development Board; Department of Central Management Services; Department of Natural Resources, Department of Commerce and Economic Opportunity; Environmental Protection Agency; and Governor's Office of Management and Budget.

Uma abordagem à incorporação de lenhinosulfonatos e materiais reciclados em misturas de SBR para produção sustentável de solas

Mestrado em Engenharia Química - Ramo Otimização Energética na Indústria Química

Gestão ambiental e competitividade no setor da construção civil :um estudo sobre a aceitabilidade de práticas ambientais no mercado imobiliário

This work investigates the importance of Eco-Materiais applied in the civil construction and the necessity of knowledge of the real estate market, showing the importance of application of recycled products where inserted inside of a bigger scope of the sustainable development which has the subjects as the ambient management. In the theoretical referencial boarded the recycled and perfectly ecological products that demonstrate the applicability of this type of products in the sector of the civil construction, beyond the economic and social placesThe main popouse of the real estate sector is to show the awareness and demonstration in the negotiation of property constructed with these products, therefore, already it is practised by the market of the civil construction where much time sao commercialized by real estate and the its correctors lacking in same knowledge that is more deepened on these materials, having this evidence been made with statistical application of questionnaire and analyzed with base. We finish showing the statistical results with application of 142 questionnaires in a universe of 145 real estate from Natal/RN. With this, we may say that today exists a very strong concern with the environmental laws and the generated ambient impact in the civil construction and that the real estate sector has a feeling that the necessity of if inserting in this process, therefore, the real estate market in our State is in expansion and sensible to the necessity of changes, since the Natal/RN meets in the script of the tourism the International demanding of the professional that a globalized knowledge works with property, so the necessity of understanding the environmental laws and understanding application of the echo-materias used in the construction will give a better quality of life and at the same time to protect the nature

Educação ambiental e resíduos sólidos: a ação da cooperlix em Presidente Prudente-SP

Pós-graduação em Geografia - FCT

Mejoras tecnológicas en el reciclado de residuos de construcción y demolición (RCD)

La tesis doctoral “Mejoras Tecnológicas en el Reciclado de Residuos de Construcción y Demolición (RCD)” investiga la utilización de los separadores hidráulicos para mejorar la calidad de los áridos reciclados, y se demuestra que es un equipo más eficiente que las técnicas actuales basadas en la simple separación por densidad. En la tesisn se ha realizado inicialmente una revisión de la situación del sector, para a continuación centrarse en los sistemas de separación utilizados en las plantas de valorización españolas. Una vez analizados éstos y en particular los de tipo hidráulico, de los que se resume un estudio comparativo, se ha procedido a ensayar a escala de Laboratorio el comportamiento de un separador hidráulico de aceleración diferencial con diversos materiales procedentes de tres plantas de reciclaje. Adicionalmente fueron probadas otras técnicas, como es la separación magnética para mejorar la calidad de los productos reciclados. En vista de los buenos resultados de la investigación, se procede a escalar los ensayos con equipo piloto y distintas composiciones de naturaleza cerámica y hormigón. El equipo utilizado fue un jig de 3´x 1´ en el que se ensayaron las tres muestras con resultados diferentes. La limpieza de los materiales impropios y el yeso fue positiva en las tres muestras, y únicamente la separación entre sí de los componentes pétreos, resultó dependiente de su proporción en la mezcla, obteniéndose los mejores resultados en las muestras con menor cantidad de materiales cerámicos. Finalmente, se procede a analizar en un laboratorio reconocido las propiedades de los áridos reciclados obtenidos en la separación hidráulica por jig, y constatar las mejoras conseguidas para su utilización como materiales de construcción en usos ligados y no ligados. Todo lo anterior permite afirmar que los equipos de separación hidráulica con aceleración diferencial (jig) presentan una innovación tecnológica en el reciclado de los residuos de construcción y demolición (RCD). ABSTRACT The doctoral thesis “Technological Improvements in Recycling of Construction and Demolition Waste (C&DW)” researches the hydraulic separators utilization in order to improve the recycled aggregates quality, demonstrating that the equipment is more efficient than the current techniques based on the simple density separation. This doctoral thesis has been initially done reviewing the situation of the sector and focusing afterwards on the separation systems used at the Spanish recovery facilities. Once analyzed these and, particularly, the hydraulic type ones, from which a comparative study has been summarized, the behavior of a differential acceleration hydraulic separator with various materials coming from three recycling plants has been tested at laboratory scale. Additionally other techniques have been tested, such as the magnetic separation to improve the quality of recycled products. In view of the good investigation results, the testing process scaled up by using pilot equipment and different ceramics and concrete compositions. The equipment utilized was a jig 3” x 1”, in which the three samples were tested with different results. The unsuitable materials and gypsum cleanliness was positive on the three samples and only the separation among the stony components turned out to be dependent of its proportion in the mixing, obtaining the best results in the samples with less quantity of ceramic materials. Finally, the properties of the recycled aggregates obtained by jig hydraulic separation are analyzed at a recognized laboratory and the improvements gained for their utilization as construction materials, in bounded and unbounded uses, are stated. The facts cited are a basis for affirming that the hydraulic separator equipments with differential acceleration (jig) offer a technological innovation in the Recycling of Construction and Demolition Waste (C&DW).

The resource conservation effect of recycling in a dynamic Leontief model

The aim of the paper is to investigate the impact of recycling on the use of non-renewable resources in the economy. The paper tries to generalize the classical dynamic input–output model. In this regard we extend the standard Leontief model with the balance equation of recycled products, and we establish some properties of this augmented model. We investigate how recycling extends the availability of non-renewable natural resources for the next generations in an inter-industry framework. Supposing a balanced growth both for production and consumption, we examine the existence of the balanced growth path of this model and compare the results to the classical Leontief model. We try to answer the question whether recycling/reuse increases the growth possibility of an economy. Finally, we illustrate our results with a simple numerical example. Thus, we analyze a possible sustainable development of the economy on the basis of the product recovery management of industries.

A production/recycling model with quality consideration

An integrated production–recycling system is investigated. A constant demand can be satisfied by production and recycling. The used items might be bought back and then recycled. The not recycled products are disposed off. Two types of models are analyzed. The first model examines and minimizes the EOQ related cost. The second model generalizes the first one by introducing additionally linear waste disposal, recycling, production and buyback costs. This basic model was examined by the authors in a previous paper. The main results are that a pure strategy (either production or recycling) is optimal. This paper extends the model for the case of quality consideration: it is asked for the quality of the bought back products. In the former model we have assumed that all returned items are serviceable. One can put the following question: Who should control the quality of the returned items? If the suppliers examine the quality of the reusable products, then the buyback rate is strongly smaller than one, α<1. If the user does it, then not all returned items are recyclable, i.e. the use rate is smaller than one, δ<1. Which one of the control systems are more cost advantageous in this case?

Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) as aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase II, which is reported here, investigated concrete paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective, as was the case with concrete building blocks, was to replicate the process used by industry in fabricating concrete paving blocks in the laboratory. The compaction technique used involved vibration and pressure at the same time, i.e. a vibro-compaction technique. An electric hammer used previously for building blocks was not sufficient for adequate compaction of paving blocks. Adequate compaction could only be achieved by using the electric hammer while the specimens were on a vibrating table. The experimental work involved two main series of tests, i.e. paving blocks made with concrete- and masonry-derived aggregate. Variables that were investigated were level of replacement of (a) coarse aggregate only, (b) fine aggregate only, and (c) both coarse and fine aggregate. Investigation of mechanical properties, i.e. compressive and tensile splitting strength, of paving blocks made with recycled demolition aggregate determined levels of replacement which produced similar mechanical properties to paving blocks made with newly quarried aggregates. This had to be achieved without an increase in the cement content. The results from this research programme indicate that recycled demolition aggregate can be used for this new higher value market and therefore may encourage demolition contractors to develop crushing and screening facilities for this. (C) 2011 Published by Elsevier Ltd.

The use of recycled demolition aggregate in precast concrete products – Phase III: Concrete pavement flags

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) derived aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase III, which is reported here, investigated
concrete pavement flags. This was subsequent to studies on building and paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective was, as was the case with concrete building
and paving blocks, to replicate the process used by industry in fabricating concrete pavement flags in the laboratory. The ‘‘wet’’ casting technique used by industry for making concrete flags requires a very workable mix so that the concrete flows into the mould before it is compressed. Compression squeezes out water from the top as well as the bottom of the mould. This industrial casting procedure was successfully replicated in the laboratory by using an appropriately modified cube crushing machine and a special mould typical of what is used by industry. The mould could be filled outside of the cube crushing machine and then rolled onto a steel frame and into the machine for it to be compressed. The texture and mechanical properties of the laboratory concrete flags were found to be similar to the factory ones. The experimental work involved two main series of tests, i.e. concrete flags made with concrete- and
masonry-derived aggregate. Investigation of flexural strength was required for concrete paving flags. This is different from building blocks and paving blocks which required compressive and tensile splitting strength respectively. Upper levels of replacement with recycled demolition aggregate were determined
that produced similar flexural strength to paving flags made with newly quarried aggregates, without requiring an increase in the cement content. With up to 60% of the coarse or 40% of the fine fractions replaced with concrete-derived aggregates, the target mean flexural strength of 5.0 N/mm2 was still
achieved at the age of 28 days. There was similar detrimental effect by incorporating the fine masonry-derived aggregate. A replacement level of 70% for coarse was found to be satisfactory and also conservative. However, the fine fraction replacement could only be up to 30% and even reduced to 15% when used for mixes where 60% of the coarse fraction was also masonry-derived aggregate.