Tailoring carbon nanotips in the plasma-assisted chemical vapor deposition: Effect of the process parameters

Carbon nanotips have been synthesized from a thin carbon film deposited on silicon by bias-enhanced hot filament chemical vapor deposition under different process parameters. The results of scanning electron microscopy indicate that high-quality carbon nanotips can only be obtained under conditions when the ion flux is effectively drawn from the plasma sustained in a CH4 + NH3 + H2 gas mixture. It is shown that the morphology of the carbon nanotips can be controlled by varying the process parameters such as the applied bias, gas pressure, and the NH3 / H2 mass flow ratios. The nanotip formation process is examined through a model that accounts for surface diffusion, in addition to sputtering and deposition processes included in the existing models. This model makes it possible to explain the major difference in the morphologies of the carbon nanotips formed without and with the aid of the plasma as well as to interpret the changes of their aspect ratio caused by the variation in the ion/gas fluxes. Viable ways to optimize the plasma-based process parameters to synthesize high-quality carbon nanotips are suggested. The results are relevant to the development of advanced plasma-/ion-assisted methods of nanoscale synthesis and processing.

The perturbational treatment of the process of hydrogen abstraction by ketones

The change in energy during hydrogen abstraction by ketones is estimated for different electronic states as a function of the intermolecular orbital overlap employing perturbation theory. The results suggest that ketones preferentially undergo the in-plane reaction and abstract a hydrogen atom in their triplet nπ* state. For ketones where the triplet ππ* state lies below the triplet nπ* state, hydrogen abstraction can take place in the ππ* state owing to the crossing of the zero order reaction surfaces of the nπ* and ππ* states.

An Empirical Model of the Process of Synthesis of Multiple State Mechanical Devices

Automated synthesis of mechanical designs is an important step towards the development of an intelligent CAD system. Research into methods for supporting conceptual design using automated synthesis has attracted much attention in the past decades. The research work presented here is based on the processes of synthesizing multiple state mechanical devices carried out individually by ten engineering designers. The designers are asked to think aloud, while carrying out the synthesis. The ten design synthesis processes are video recorded, and the records are transcribed and coded for identifying activities occurring in the synthesis processes, as well as for identifying the inputs to and outputs from the activities. A mathematical representation for specifying multi-state design task is proposed. Further, a descriptive model capturing all the ten synthesis processes is developed and presented in this paper. This will be used to identify the outstanding issues to be resolved before a system for supporting design synthesis of multiple state mechanical devices that is capable of creating a comprehensive variety of solution alternatives could be developed.

Observations on the influence of external factors on the duration of the embryonic development and on the molting rhythm of Cyclops vicinus. [Translation from: Oecologia 7, 342-355, 1971.]

Investigations on the control of the embryonic and post-embryonic development of arthropods have formed an intensively studied field of zoological research for a long time, Here in especially favourable cases the causal chain from the operation of external factors on the influence of physiological mechanisms, eg. of the hormone variety, is known right through to its primary influences. A comparative approach to the relevant questions was in the main only made in the case of the insects. For crustacea , investigations are available almost exclusively only for the malacostraca. This study examines the influence of the factors of temperature and photoperiod on the entire development of Cyclops vicinus. Tests were made on whether the light-darkness change serves as a regulator for a possible existing molting rhythm - a question which for the entire arthropods has been settled only very rarely. The basic material for the cultures that were examined originates from Lake Constance.

Shortened duration of the annual Neocalanus plumchrus biomass peak in the Northeast Pacific

The calanoid copepod Neocalan us plumchrus (Marukawa) is a dominant member of the spring mesozooplankton in the subarctic North Pacific and Bering Sea. Previous studies have shown interdecadal and latitudinal variation in seasonal developmental timing, with peak biomass occurring earlier in years and places with warmer upper ocean temperatures. Because N. plumchrus normally has a single dominant annual cohort, its seasonal timing can be indexed from measurements of total population biomass or by following progressive changes in stage composition. Early studies empirically found that peak upper ocean biomass occurred when about half of the pre-dormant population had reached copepodite stage 5 (C5). However, more recent comparisons derived from recent Continuous Plankton Recorder (CPR) data now show peak biomass when a larger fraction (> 80%) of the population is at C5. CPR samples the surface 10 to 15 m, but comparisons to depth-resolved BIONESS data show that this discrepancy is not an artefact of sampling depth. Other causes are either a prolongation of duration of pre-dormant C5 or a narrowing of the age range making up the annual cohort. We assessed changes in cohort width using a modification of Greve's cumulative percentile method, and found that average cohort widths in the Alaska Gyre were significantly narrower in 2000-2007 than in 1957-1965 (1968-1980 were intermediate). Net tow sampling of Strait of Georgia populations showed a similar significant narrowing of cohorts in the 2003-2005 sampling period. This study provides evidence that in addition to the shift to an earlier occurrence of peak biomass reported previously, the duration of the peak has also decreased in the last decade.

Perceptions of the process of care among caregivers and care recipients in Dementia Care Networks

The Dementia Care Networks Study investigated 4 community-based, not-for-profit dementia care networks in Ontario, Canada. Investigators examined whether sociodemographic and health characteristics, type of support network, and amount of service use among care recipients and caregivers (n = 267 dyads) were associated with experiences with care processes. The process-of-care constructs were: family physicians' awareness of services; experiences with health care workers, and assessment and placement activities. The findings highlighted that family physicians' understanding of dementia and their ability to work with the dyad to become aware of and accept services, was an important component in the dyad's satisfaction. If caregivers received home support and the care recipients received emotional support from their social support network, they were more likely to be satisfied with their experiences with health care workers. In summary, increased awareness and provision of services were associated with more positive perceptions of network effectiveness. © 2007 Sage Publications.

Investigation of the process energy demand in polymer extrusion: a brief review and an experimental study

Extrusion is one of the fundamental production methods in the polymer processing industry and is used in the production of a large number of commodities in a diverse industrial sector. Being an energy intensive production method, process energy efficiency is one of the major concerns and the selection of the most energy efficient processing conditions is a key to reducing operating costs. Usually, extruders consume energy through the drive motor, barrel heaters, cooling fans, cooling water pumps, gear pumps, etc. Typically the drive motor is the largest energy consuming device in an extruder while barrel/die heaters are responsible for the second largest energy demand. This study is focused on investigating the total energy demand of an extrusion plant under various processing conditions while identifying ways to optimise the energy efficiency. Initially, a review was carried out on the monitoring and modelling of the energy consumption in polymer extrusion. Also, the power factor, energy demand and losses of a typical extrusion plant were discussed in detail. The mass throughput, total energy consumption and power factor of an extruder were experimentally observed over different processing conditions and the total extruder energy demand was modelled empirically and also using a commercially available extrusion simulation software. The experimental results show that extruder energy demand is heavily coupled between the machine, material and process parameters. The total power predicted by the simulation software exhibits a lagging offset compared with the experimental measurements. Empirical models are in good agreement with the experimental measurements and hence these can be used in studying process energy behaviour in detail and to identify ways to optimise the process energy efficiency.

Sport-Specific Arbitration in Canada: A Qualitative Investigation of Four Athletes' Perceptions of the Fairness of the Process

This thesis explored Canadian high performance Athletes' perceptions of the fairness of the SDRCC sport-specific arbitral process. Leventhal’s (1980) model of procedural justice judgment was found to be an effective tool for exploring Athletes’ perceptions of the fairness of the process. Five of his six procedural justice antecedents: consistency, bias suppression, accuracy of information, representativeness, and ethicality influenced the Athletes’ perceptions of the fairness of the process. Emergent data also revealed that the Athletes’ perceptions of fairness were also influenced by three contextual factors and an additional antecedent of procedural justice. Efficiency of the process, inherent power imbalance between Athletes and NSOs, and the measurable effect of the process on personal and professional relationships differentiate sport-specific arbitration from most other processes of allocation. The data also indicated that the opportunity to voice one’s case was also an important determinant of the Athletes’ perceptions of the fairness of the process.