CSR in Private Enterprises in Developing Countries : Evidences from the Ready-Made Garments Industry in Bangladesh

"This book examines the growing trend of recognition and practices of CSR in private enterprises in developing countries. It identifies the challenges and deficiencies in these practices and proposes means for improvement. Based on a sound theoretical foundation, this book focusses on the case of Bangladesh and the ready-made garment industry to exemplify the described developments. After a brief introduction the book outlines the standards of Corporate Social Responsibility. It compares the trends in CSR practices both in developed and developing countries and then embarks on CSR practices in the private sector in Bangladesh to finally present a detailed analysis of CSR and its practices in the ready-made garment industry. The book not only compares developing countries with developed, but as well provides an assessment and analysis of different stages of CSR within the South Asian area."--published website

The ones that come ready made:The identification and use of Sus tusks as tools at prehistoric cave sites in Malaysia

Evidence for osseous technologies has featured in excavation reports from Southeast Asia for almost a century and from archaeological deposits as old as 43,000 years BP. However, in contrast to the significance that is placed on this technology in other parts of the world, until recently, Southeast Asian assemblages have drawn only very limited attention. Concentrating on evidence from Malaysia, the current paper examines one element of this inventory of tools: the deliberate modification of pig canines and the means by which such alteration can be distinguished from patterns of natural tooth wear. Particular attention is paid to the bearded pig (Sus barbatus), as it is one of the two species of wild boar in Malaysia whose tusks are most likely to have been used by prehistoric toolmakers. Reference is also made to wider, regional ethnographic examples of known tusk implements and their accredited uses to further assist in the identification process. Distinguishing criteria for worked tusk are formulated according to the type and extent of modification. These criteria are then applied to archaeological specimens recovered from two prehistoric cave sites in Malaysia, Gua Bintong and Niah Cave.

Work teams : perceptions of a ready-made support system?

Much research on work teams has been focused at the team-level, considering such issues as effectiveness, productivity, and overall interaction. Using qualitative in-depth interviews, the author has asked the question: what is the experience of the individual working within a team? This paper discusses one theme to have emerged, that of perceptions of support being provided within the team. Respondents' accounts presented an expectation that support would be forthcoming from other team members. The discussion considers the experiences of respondents both when this support was received and when it was not, prompting a reconsideration of our understanding of work teams. Further discussion shows how the expectation and provision of this support has implications for how individuals view both teams and organizational work in general, and how consideration of this issue can assist managers in the renewal of employees' energy and well-being.

Work teams: perceptions of a ready-made support system?

Much research on work teams has been focused at the team-Ievel,  considering such issues as effectiveness, productivity and overall  interaction. Using qualitative in-depth interviews, the author has asked the question: what is the experience of the individual working within a team? This paper discusses one theme to have emerged, that of perceived emotional support being provided within the team. Respondents' descriptions of emotional support are discussed in terms of acceptance and respect, and of caring. The discussion shows how the provision of this support has implications for how individuals view teams in general, and indicates areas for future research.

Towards a model of corporate social responsibility (CSR) in the ready made garments (RMG) industry in Bangladesh

As the primary earner of foreign exchange in Bangladesh, the readymade garments (RMG) industry has been under constant criticism for the absence of corporate social responsibility (CSR) practices in the industry. Based on previous research, and drawing on the model of CSR in food industry developed by Maloni and Brown (2006), this paper aims to develop a model of CSR for the RMG industry in Bangladesh and discusses its various aspects to assist our understanding of the CSR issues in this industry. As the absence of a functional practice of CSR in the industry is considered as a threat to its sustainability, this paper provides important implications for the sustainability of RMG industry in Bangladesh.

Corporate social responsibility, economic globalization and developing countries: a case study of the ready made garments industry in Bangladesh

Purpose – This paper aims to examine the state of corporate social responsibility (CSR) in labour-intensive industries in developing countries in the context of economic globalization. Using the ready-made garments’ (RMG) industry in Bangladesh as a case study, challenges and key issues relating to CSR are highlighted. Design/methodology/approach – The paper draws from the review of existing literature, and the content analysis of two leading newspapers in Bangladesh for a period of one year (July 2012-June 2013) to identify the key and contemporary issues related to CSR in the RMG industry. Findings – Findings identify the contemporary issues of concerns associated with CSR in the RMG industry, relating them to the debate on the applicability of Carroll’s CSR pyramid to developing countries. The findings suggest that non-compliance of CSR in labour-intensive industries is a function of the nature of economic globalization. The need for a stakeholder approach towards CSR for the profitability and sustainability of this industry is also highlighted. Practical implications – This paper makes contributions to two different but important interrelated discourses on CSR and economic globalization. It also provides insights into the complexity involved in CSR in labour-based export industries in developing countries and acts as a springboard for further research. Originality/value – The paper is the first to look at all major issues of concern regarding CSR in theRMG industry in Bangladesh. As Bangladesh is an exemplar of developing countries andRMGis a typical starter industry, the findings are generalizable to similar industries in other developing countries.

La città ready-made. Partecipazione, relazione e azione nel ‘900

La città ready-made. Partecipazione, relazione e azione nel ‘900 è un percorso storico-critico che si snoda lungo tutto il ‘900 alla ricerca degli episodi in cui è possibile riscontrare la partecipazione nelle pratiche estetiche di diverse generazioni di artisti; per imbastire un racconto puntuale e sistematico, inoltre, si è ricorsi ad una metafora genetica che ha riscontrato una fase — corrispondente alla prima metà del secolo — in cui il cromosoma responsabile di tale afflato partecipativo è risultato recessivo e un’altra — corrispondente stavolta alla seconda metà, più o meno dagli anni ’60 ai ’90 — in cui si è potuto registrare, altresì, una dominanza. Ad influire su questi fenomeni e sul loro svolgimento nei decenni, i protagonisti assoluti di questa trattazione: la Città e il Pubblico che, di volta in volta, facendo sentire la loro presenza o facendola venir meno, hanno dettato l’agenda della socio-relazionalità nel ‘900. Si è, inoltre, provveduto a rileggere alcuni episodi estetici al fine di evidenziarne un andamento ciclico e di ripetizione: mentre nella prima metà della ricerca si è scovato il seme della socio-relazionalità nelle visite e nelle derive di dadaisti e situazionisti, nella seconda ci si è concentrati sull’ampia produzione dei collettivi artistici di New York negli anni ’70. A dimostrazione di come la relazionalità non sia un fenomeno esclusivamente legato alla pratica dell’arte degli anni ’90, ma che, con le opportune distinzioni generazionali, è possibile riscontrarne le tracce in tutta la contemporaneità.

Self-refraction, ready-made glasses and quality of life among rural myopic Chinese children: a non-inferiority randomized trial.

PURPOSE: To study, for the first time, the effect of wearing ready-made glasses and glasses with power determined by self-refraction on children's quality of life. METHODS: This is a randomized, double-masked non-inferiority trial. Children in grades 7 and 8 (age 12-15 years) in nine Chinese secondary schools, with presenting visual acuity (VA) ≤6/12 improved with refraction to ≥6/7.5 bilaterally, refractive error ≤-1.0 D and <2.0 D of anisometropia and astigmatism bilaterally, were randomized to receive ready-made spectacles (RM) or identical-appearing spectacles with power determined by: subjective cycloplegic retinoscopy by a university optometrist (U), a rural refractionist (R) or non-cycloplegic self-refraction (SR). Main study outcome was global score on the National Eye Institute Refractive Error Quality of Life-42 (NEI-RQL-42) after 2 months of wearing study glasses, comparing other groups with the U group, adjusting for baseline score. RESULTS: Only one child (0.18%) was excluded for anisometropia or astigmatism. A total of 426 eligible subjects (mean age 14.2 years, 84.5% without glasses at baseline) were allocated to U [103 (24.2%)], RM [113 (26.5%)], R [108 (25.4%)] and SR [102 (23.9%)] groups, respectively. Baseline and endline score data were available for 398 (93.4%) of subjects. In multiple regression models adjusting for baseline score, older age (p = 0.003) and baseline spectacle wear (p = 0.016), but not study group assignment, were significantly associated with lower final score. CONCLUSION: Quality of life wearing ready-mades or glasses based on self-refraction did not differ from that with cycloplegic refraction by an experienced optometrist in this non-inferiority trial.

Metaheuristic approaches to the hybrid flow shop scheduling problem with a cost-related criterion

In the paper, the flow-shop scheduling problem with parallel machines at each stage (machine center) is studied. For each job its release and due date as well as a processing time for its each operation are given. The scheduling criterion consists of three parts: the total weighted earliness, the total weighted tardiness and the total weighted waiting time. The criterion takes into account the costs of storing semi-manufactured products in the course of production and ready-made products as well as penalties for not meeting the deadlines stated in the conditions of the contract with customer. To solve the problem, three constructive algorithms and three metaheuristics (based one Tabu Search and Simulated Annealing techniques) are developed and experimentally analyzed. All the proposed algorithms operate on the notion of so-called operation processing order, i.e. the order of operations on each machine. We show that the problem of schedule construction on the base of a given operation processing order can be reduced to the linear programming task. We also propose some approximation algorithm for schedule construction and show the conditions of its optimality.

Sustainability factors in Industrialised Building System

In Malaysia, Industrialised Building Systems (IBS) are being promoted as a potential to enhance sustainability by the building industry and government. Known elsewhere as prefabricated construction, IBS employs a combination of ready-made components in the construction of buildings that promote quality of production, enhance simplification of construction processes and minimise on-site work. The components are manufactured in a factory either on or off site. They are then positioned and assembled into building structures. The unique characteristic of IBS has the potential to respond well to the sustainability challenge facing the construction industry. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications and some of the rating schemes fail to assess IBS towards sustainability deliverables. A holistic approach to improving IBS implementation is necessary to consider sustainability perceptions on IBS among key stakeholders. As IBS design is one of the most important development phases to incorporate sustainability requirements and expectations, a framework of embedding sustainability factors into IBS design is being developed through research. This paper presents an improved IBS design process focused on sustainability, showing where and how sustainability should be assessed to improve IBS construction. The framework being developed can provide guidance and decision making assistance to not only design consultants but all relevant stakeholders by integrating sustainability concepts into IBS applications. Outcome of the research will also provide a benchmark for developing countries in adopting prefabricated construction systems.

Legal regulation of 'decent work' : evidence from two big industries in Bangladesh

In most developing countries, the overall quality of the livelihood of labourers, work place environment and implementation of labour rights do not progress at the same rate as their industrial development. To address this situation, the ILO has initiated the concept of 'decent work' to assist regulators articulate labour-related social policy goals. Against this backdrop, this article assesses the Bangladesh Labour Law 2006 by reference to the four social principles developed by the ILO for ensuring 'decent work'. It explains the impact of the absence of these principles in this Law on the labour administration in the ready-made garment and ship-breaking industries. It finds that an appropriate legislative framework needs to be based on the principles of 'decent work' to establish a solid platform for a sound labour regulation in Bangladesh.

Decision making guidelines for sustainable construction of industrialised building systems

The construction industry has an obligation to respond to sustainability expectations of our society. Solutions that integrate innovative, intelligent and sustainability deliverables are vital for us to meet new and emerging challenges. Industrialised Building Systems (IBS), or known otherwise as prefabrication, employs a combination of ready-made components in the construction of buildings. They promote quality of production, enhance simplification of construction processes and minimise waste. The unique characteristics of this construction method respond well to sustainability. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications. The existing rating schemes fail to assess IBS against sustainability measures. To ensure the capture of full sustainability potential in buildings developed, the critical factors and action plans agreeable to all participants in the development processes need to be identified. Through questionnaire survey, eighteen critical factors relevant to IBS sustainability were identified and encapsulated into a conceptual framework to coordinate a systematic IBS decision making approach. Five categories were used to separate the critical factors into: ecological performance; economic value; social equity and culture; technical quality; and implementation and enforcement. This categorisation extends the "Triple Bottom Lines" to include social, economic, environmental and institutional dimensions. Semi-structured interviews help identify strategies of actions and solutions of potential problems through a SWOT analysis framework. These tools help the decision-makers maximise the opportunities by using available strengths, avoid weaknesses, and diagnose possible threats in the examined issues. The recommendations formed an integrated action plan to present information on what and how to improve sustainability through tackling each critical factor during IBS development. It can be used as part of the project briefing documents for IBS designers. For validation and finalisation the research deliverables, three case studies were conducted. The research fills a current gap by responding to IBS project scenarios in developing countries. It also provides a balanced view for designers to better understand sustainability potential and prioritize attentions to manage sustainability issues in IBS applications.

Meta-regulation approach to raise social accountability In global supply firms

This Article proposes a meta-regulation approach to address the gap between the objectives, commitment, practice and outcome in the accountability practice of the global supply chain in the developing countries. The literatures on the accountability practice in the global supply chains typically focuses on the strategies for raising corporate social accountability standards in multinational buying firms and seldom focuses on this strategies in the outsourced firms in the developing countries. This article tries to fill this void by examining the situation in Bangladesh, the third largest RMG supply country in the world. It conceptualizes a meta-regulation approach with the aim of raising social accountability practice in this industry. It shows that this regulation approach is suitable to effectively raise this practice standard in a perspective where the non-legal drivers are meagrely low, global buying firms are highly profit driven and the governmental agencies are either inadequate or highly corrupt.