Diseño y optimización de un aplanador de flujo neutrónico para dopaje de silicio en el Reactor RA-10.

El reactor multipropósito RA-10 que se construirá en Ezeiza tiene como objetivo principal aumentar la producción de radioisótopos destinados al diagnóstico de enfermedades; adicionalmente el proyecto RA-10 permitirá ofrecer al sistema científico-tecnológico oportunidades de investigación, desarrollo y producción. Entre ellas se contará con una facilidad de dopaje de silicio a través de transmutación neutrónica para producir material semiconductor. La principal ventaja de esta técnica de fabricación es que se obtiene el semiconductor más homogéneamente dopado del mercado. Esto se logra irradiando a la pieza con un flujo neutrónico axialmente uniforme. La uniformidad axial se obtiene diseñando un aplanador de flujo que consiste en un conjunto de anillos de acero de diferentes espesores para lograr aplanar el perfil de flujo neutrónico que irradia al silicio. El objetivo de este trabajo es diseñar e implementar un algoritmo que permita calcular los espesores óptimos de acero de forma tal de modificar el perfil de flujo neutrónico que se genera en el núcleo para uniformizarlo lo más posible. Se proponen y evalúan mejoras para incrementar el valor del flujo neutrónico al cual se uniformiza. Posteriormente se evalúan los tiempos necesarios para obtener diferentes resistividades objetivo y se realizan cálculos de activación neutrónica para determinar los tiempos de decaimiento necesarios para cumplir los límites de actividad requeridos. Se realizan además cálculos de calentamiento para determinar la potencia que se debe disipar para refrigerar la facilidad.

Sistema avanzado de alarmas para el reactor RA6.

Los sistemas de alarmas constituyen un elemento clave en las plantas modernas de procesos industriales. A lo largo de los años, los mismos han ido evolucionando de la mano del importante desarrollo en la industria del software, para pasar de ser simples paneles de anunciación y lámparas cableadas hasta complejos sistemas inteligentes que asisten al operador en sus funciones de operación. En el desarrollo de este trabajo se planteó diseñar un Sistema Avanzado de Alarmas para el Reactor Nuclear de Investigación RA6 contemplando las nuevas tecnologías existentes para incorporar mejoras a la actual sala de control. Para ello se trabajó siguiendo la metodología propuesta por la guía de diseño de sistemas de alarmas ANSI / ISA- SP-18. Para asistir al diseño y la verificación del sistema se utilizó un modelo termohidráulico de la planta desarrollado en Matlab/Simulink. Entre las nuevas herramientas incorporadas en el prototipo final obtenido se pueden mencionar: creación de archivos históricos, asignación de prioridades, supresiones de alarmas según estado operativo, filtrado y agrupamiento de alarmas.

Diseño y optimización de un aplanador de flujo neutrónico para dopaje de silicio en el Reactor RA-10.

El reactor multipropósito RA-10 que se construirá en Ezeiza tiene como objetivo principal aumentar la producción de radioisótopos destinados al diagnóstico de enfermedades; adicionalmente el proyecto RA-10 permitirá ofrecer al sistema científico-tecnológico oportunidades de investigación, desarrollo y producción. Entre ellas se contará con una facilidad de dopaje de silicio a través de transmutación neutrónica para producir material semiconductor. La principal ventaja de esta técnica de fabricación es que se obtiene el semiconductor más homogéneamente dopado del mercado. Esto se logra irradiando a la pieza con un flujo neutrónico axialmente uniforme. La uniformidad axial se obtiene diseñando un aplanador de flujo que consiste en un conjunto de anillos de acero de diferentes espesores para lograr aplanar el perfil de flujo neutrónico que irradia al silicio. El objetivo de este trabajo es diseñar e implementar un algoritmo que permita calcular los espesores óptimos de acero de forma tal de modificar el perfil de flujo neutrónico que se genera en el núcleo para uniformizarlo lo más posible. Se proponen y evalúan mejoras para incrementar el valor del flujo neutrónico al cual se uniformiza. Posteriormente se evalúan los tiempos necesarios para obtener diferentes resistividades objetivo y se realizan cálculos de activación neutrónica para determinar los tiempos de decaimiento necesarios para cumplir los límites de actividad requeridos. Se realizan además cálculos de calentamiento para determinar la potencia que se debe disipar para refrigerar la facilidad.

Sistema avanzado de alarmas para el reactor RA6.

Los sistemas de alarmas constituyen un elemento clave en las plantas modernas de procesos industriales. A lo largo de los años, los mismos han ido evolucionando de la mano del importante desarrollo en la industria del software, para pasar de ser simples paneles de anunciación y lámparas cableadas hasta complejos sistemas inteligentes que asisten al operador en sus funciones de operación. En el desarrollo de este trabajo se planteó diseñar un Sistema Avanzado de Alarmas para el Reactor Nuclear de Investigación RA6 contemplando las nuevas tecnologías existentes para incorporar mejoras a la actual sala de control. Para ello se trabajó siguiendo la metodología propuesta por la guía de diseño de sistemas de alarmas ANSI / ISA- SP-18. Para asistir al diseño y la verificación del sistema se utilizó un modelo termohidráulico de la planta desarrollado en Matlab/Simulink. Entre las nuevas herramientas incorporadas en el prototipo final obtenido se pueden mencionar: creación de archivos históricos, asignación de prioridades, supresiones de alarmas según estado operativo, filtrado y agrupamiento de alarmas.

Versi??n reducida del cuestionario revisado de personalidad de Eysenck (EPQ-RA)

Resumen tomado de la revista

Efeito da redução do diâmetro interno sobre o desempenho de um reator aeróbio de leito fluidizado no tratamento de esgoto sanitário

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of Platform and Abutment Angulation on Peri-Implant Bone. A Three-Dimensional Finite Element Stress Analysis

The aim of this study was to evaluate stress distribution on the pen-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm x 5 mm) were created varying the platform (R, regular or S. switching) and the abutments (S, straight or A, angulated 15 degrees). The models were created by using Mimics 13 and Solid Works 2010 software programs. The numerical analysis was performed using ANSYS Workbench 10.0. Oblique forces (100 N) were applied to the palatine surface of the central incisor. The bone/implant interface was considered perfectly integrated. Maximum (sigma(max)) and minimum (sigma(min)) principal stress values were obtained. For the cortical bone the highest stress values (sigma(max)) were observed in the RA (regular platform and angulated abutment, 51 MPa), followed by SA (platform switching and angulated abutment, 44.8 MPa), RS (regular platform and straight abutment, 38.6 MPa) and SS (platform switching and straight abutment, 36.5 MPa). For the trabecular bone, the highest stress values (sigma(max)) were observed in the RA (6.55 MPa), followed by RS (5.88 MPa), SA (5.60 MPa), and SS (4.82 MPa). The regular platform generated higher stress in the cervical periimplant region on the cortical and trabecular bone than the platform switching, irrespective of the abutment used (straight or angulated).

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e água cinza

The anaerobic treatment of sewage is widely employed in Brazil and it is an appreciated way for the treatment of effluents, helping to reduce the environmental impact in rivers. The methane gas obtained from the process can be applied to improve the energetic efficiency of the system, reducing the amount of waste and the cost of the treatment process. This work presents the net energy balance of anaerobic reactors applied to the treatment of sewage. The analysis was performed considering full-scale and laboratory-scale treatment systems. In laboratory scale, the results from three kinds of systems were compared regarding the biological treatment of greywater. Two of them (UASB7 and UASB12) were anaerobic and the other one was a combined anaerobic-aerobic system (UASB7/SBR6). Greywater methanization (compared to theoretical maximum) was calculated considering 100% removal (g BOD/day), the literature percentage removal and the anionic surfactant presence in the effluentt. For each of these three cases, the efficiencies were, respectively, 16.9%, 43.6% and 51.3% in UASB7 reactor, 25.6%, 50.3% and 59.2% in UASB12 reactor and 30.6%, 61.2% and 71.9% in UASB7/SBR6 reactor. The energetic potential was found to be 4.66x10-4, 7.77x10-4 and 5.12x10-4 kWh/L for the UASB7, UASB12 and UASB7/SBR6 reactors, respectively. The pumping system, the aeration (in the anaerobic-aerobic system) and the temperature controlled heating system were considered to calculate the energetic consumption. However, the third one was not employed since tropical regions like Brazil do not need heating systems and also because of its high energetic consumption. The calculated net energy balance in the reactors was negative in the case of greywater, respectively -0.16, -0.28 and -0.18 kWh/L for the reactors UASB7, UASB12 and UASB7/SRB6. In full scale (ETE Jardim das Flores - Rio Claro, SP), the average energy... (Complete abstract click electronic access below)

Autoantibodies to calpastatin (an endogenous inhibitor for calcium-dependent neutral protease, calpain) in systemic rheumatic diseases.

We identified an autoantibody that reacts with calpastatin [an inhibitor protein of the calcium-dependent neutral protease calpain (EC 3.4.22.17)]. In early immunoblot studies, sera from patients with rheumatoid arthritis (RA) recognized unidentified 60-, 45-, and 75-kDa proteins in HeLa cell extracts. To identify these autoantigens, we used patient sera to clone cDNAs from a lambda gt11 expression library. We isolated clones of four genes that expressed fusion proteins recognized by RA sera. The 1.2-kb cDNA insert (termed RA-6) appeared to encode a polypeptide corresponding to the 60-kDa antigen from HeLa cells, since antibodies bound to the RA-6 fusion protein also reacted with a 60-kDa HeLa protein. The deduced amino acid sequence of the RA-6 cDNA was completely identical with the C-terminal 178 amino acids of human calpastatin except for one amino acid substitution. Patient sera that reacted with the RA-6 also bound pig muscle calpastatin, and a monoclonal antibody to human calpastatin recognized the RA-6 fusion protein, confirming the identity of RA-6 with calpastatin. Moreover, the purified RA-6 fusion protein inhibited the proteolytic activity of calpain, and IgG from a serum containing anti-calpastatin antibodies blocked the calpastatin activity of the RA-6 fusion protein. Immunoblots of the RA-6 product detected autoantibodies to calpastatin in 57% of RA patients; this incidence was significantly higher than that observed in other systemic rheumatic diseases, including systemic lupus erythematosus (27%), polymyositis/dermatomyositis (24%), systemic sclerosis (38%), and overlap syndrome (29%). Thus, anti-calpastatin antibodies are present most frequently in patients with RA and may participate in pathogenic mechanisms of rheumatic diseases.

Modeling Of Hydrolytic Polymerization In A Semibatch Nylon 6 Reactor

Hydrolytic polymerization of caprolactam to Nylon 6 in a semibatch reactor is carried out by heating a mixture of water and caprolactam. Evaporation of volatiles caused by heating results in a pressure build-up. After the pressure reaches a predetermined value, vapors are vented to keep the pressure constant for some time, and thereafter, to lower the pressure to a value slightly above atmospheric in a preprogrammed manner. The characteristics of the polymer are determined by the chemical reactions and the vaporization of water and caprolactam. The semibatch operation has been simulated and the predictions have been compared with industria data. The observed temperature and pressure histories were predicted with a fair degree of accuracy. It was found that the predictions of the degree of polymerization however are sensitive to the vapor-liquid equilibrium relations. A comparison with an earlier model, which neglected mass transfer resistance, indicates that simulation using the VLE data of Giori and Hayes and accounting for mass transfer resistance is more reliable.

Treatment of effluents contaminated with prions. Chemical reactor design

The control and elimination of prionic infective agents that may be present in the effluents, turns out to be a complicated mechanism inside a High Containment bological Facility. There are two ways to carry out this neutralization: Installation of thermal systems to ensure achieve a minimum temperature of 134 ° C sterilization plateau for a residence time of 18 minutes, and the use of chemical reactors based on the addition of sodium hypochlorite so the mixture maintained 2% of free chlorine during the reaction period. This study presents the design phases, elements and benefits, of a chemical reactor that allows the treatment of prion effluents in order to serve as a model to biocontainment facilities with areas of animal experimentation, who want to develop their work with prions.

Development and characterization of the 2,4,6-trichlorophenol (2,4,6-TCP) aerobic degrading granules in sequencing batch airlift reactor

2,4,6-trichlorophenol (2,4,6-TCP) aerobic degrading granules were successfully developed in the sequencing batch airlift reactor. The key strategy used in cultivation of the granules was dosing glucose and acetate as co-substrates. After granulation, average concentrations of 2,4,6-TCP and COD in the effluent were less than 8mgL-1 and 59mgL-1, respectively. The removal efficiencies of 2,4,6-TCP and COD were above 93% and 90%, respectively. The specific degradation rate of 2,4,6-TCP peaked at 61mg 2,4,6-TCP gVSS-1h-1 when inoculated at the concentration of 400mgL-1. The extracellular polymeric substance (EPS) contents of the 2,4,6-TCP aerobic degrading granules were decreased compared with the contents in seed sludge. Two peaks attributed to the protein-like fluorophores were identified by three-dimensional excitation emission matrix (EEM) fluorescence spectra. The decrease of fluorescence parameters, e.g., peak locations, intensities, indicated quenching effect of 2,4,6-TCP on the EPS fluorescence. Meanwhile, the shift of peak position indicated chemical changes of the EPS.

Die wirtschaftlichen Verhältnisse in Palästina und der orientalischen Diaspora im 2. bis 6. Jahrhundert der christlichen Ära

Simon Dubnow