Positive radial solutions of the Dirichlet problem for the Minkowski-Curvature equation in a ball

We study the existence and multiplicity of positive radial solutions of the Dirichlet problem for the Minkowski-curvature equation { -div(del upsilon/root 1-vertical bar del upsilon vertical bar(2)) in B-R, upsilon=0 on partial derivative B-R,B- where B-R is a ball in R-N (N >= 2). According to the behaviour off = f (r, s) near s = 0, we prove the existence of either one, two or three positive solutions. All results are obtained by reduction to an equivalent non-singular one-dimensional problem, to which variational methods can be applied in a standard way.

GALACTIC NONLINEAR DYNAMIC MODEL

We develop a model for spiral galaxies based on a nonlinear realization of the Newtonian dynamics starting from the momentum and mass conservations in the phase space. The radial solution exhibits a rotation curve in qualitative accordance with the observational data.

La escalera de caracol con ojo a finales del S.XV y comienzos del S.XVI: el caso de la ciudad y tierra de Segovia

Este trabajo de investigación se ha centrado en la escalera de caracol con ojo también denominado caracol de mallorca, en sus primeras apariciones a finales del s.XV y comienzos del s.XVI durante el llamado periodo tardogótico. Este elemento aparentemente sencillo presenta, sin embargo, una gran diversidad de esquemas geométricos. Todavía a día de hoy, no hay explicación del por qué de la mayor difusión de unos con respecto a otros. El objetivo de este trabajo ha sido valorar el papel que el confort/seguridad de uso así como la economía en el trabajo –sencillez de ejecución y coste económico– tuvieron en el contexto de la difusión de este elemento arquitectónico. Este estudio ha analizado en base a estos criterios objetivos, la geometría de cada uno de los esquemas tipo que resuelven la formación del hueco central característico este tipo de escaleras, con la intención de determinar las causas objetivas que pudieron motivar la desigual expansión de los mismos. Una vez determinado el marco teórico, se han establecido dos líneas para abordar el problema. Por un lado se ha planteado el análisis de los modelos teóricos recogidos en los distintos textos de cantería escritos por autores españoles desde finales del s.XVI. Si bien en la época en que se escribieron, la arquitectura gótica como sistema había desaparecido, alguno de sus elementos más característicos, como la escalera de caracol, continuaban empleándose. Las trazas del caracol con ojo recogidas en estos textos, describen habitualmente las soluciones geométricas más frecuentes e incluso los ejemplos construidos más conocidos, los cuales fueron levantados en su mayoría en el período en el cual se desarrolla esta investigación. Por otro lado, este estudio se plantea el análisis de modelos construidos existentes en la Ciudad y Tierra de Segovia. La razón que justifica dichos límites geográficos, la encontramos en que la mayor parte del patrimonio gótico existente en este área fue construido entre finales del s.XV y comienzos del s. XVI. Ambos grupos, modelos teóricos y modelos construidos, recogen la herencia gótica heredada en la construcción de este elemento arquitectónico. Cada una de estas dos líneas establecidas han seguido una metodología específica adaptada al objeto de análisis, si bien ambas se basan en un primer análisis individual y posterior análisis comparativo de los modelos seleccionados. Estos análisis han permitido identificar los distintos esquemas empleados para resolver el hueco central, lo que ha posibilitado establecer una clasificación general de los mismos en tres grupos: caracol con ojo de solución radial, el caracol con ojo de solución no radial y el caracol con ojo de solución tangencial. A partir de los datos y resultados obtenidos del análisis comparativo de los parámetros geométricos que afectan al confort/seguridad de uso y economía en el trabajo de dichos esquemas, podemos concluir que a pesar que los tres esquemas identificados resuelven el caracol con ojo de forma muy similar, el predominio de la solución radial y la caída en el olvido de las soluciones tangencial y no radial estuvieron justificados. ABSTRACT This work focused on the helical staircase, also known as mallorca staircase, in the late 15th and the early 16th centuries. This seemingly simple element, presents however a wide variety of geometrical designs. Still to date, there is no explanation of why some of them were limited use, while others had a wide impact. The aim of this study was to assess the influence which comfort, safety and work economy –ease of construction and financial cost– had on their widespread. This study analysed, following these objective criteria, the geometry of the different designs, which solve the characteristic inner aperture of this type of staircase. And thus, find the reasons, which motivated their uneven spread. Once the theoretical framework was developed, two research lines were set up to address the problem. On one hand, this study analysed the theoretical helical staircases described in the early Spanish texts, which were written since the end of the 16th century. Although these texts were written after the Gothic Architecture system had already disappeared, some of its more representative elements like the helical staircase were still in use. The traces of the helical stair, which are included in these texts, describe the most frequently-used designs and even the most famous real examples which were usually constructed in the Late Gothic period. On the other hand, this study analysed some real helical staircases, which were constructed in the Ciudad y Tierra de Segovia. The reason for choosing these geographical limits is that most of the Gothic buildings of this area were constructed between the end of the 15th and the early 16th centuries, during the Late Gothic period. Both groups, theoretical and constructed samples, collect the Gothic construction tradition of the helical stair. Each of these research lines followed a specific methodology, which was adapted to the research object. Nevertheless, both are based on a first individual analysis of each selected example and a later on comparative one. These analysis allowed the identification of the different layouts which solve the inner aperture of the helical staircase, what made possible to set up a broad classification in three groups, according to the geometrical design strategy that solves the central aperture: the helical staircase by radial solution, the helical staircase by non-radial solution and the helical staircase by tangent solution. The research findings of the comparative analysis of their geometrical parameters, which have an impact in the comfort, safety and work economy, have shown that although all of them solve the helical staircase in a really similar way, the fade into oblivion of the non-radial and tangent approaches was objectively motivated.

The masses of the neutron and donor star in the high-mass X-ray binary IGR J18027-2016

Aims. We report near-infrared observations of the supergiant donor to the eclipsing high mass X-ray binary pulsar IGR J18027-2016. We aim to determine its spectral type and measure its radial velocity curve and hence determine the stellar masses of the components. Methods. ESO/VLT observations of the donor utilising the NIR spectrograph ISAAC were obtained in the H and K bands. The multi-epoch H band spectra were cross-correlated with RV templates in order to determine a radial solution for the system. Results. The spectral type of the donor was confirmed as B0-1 I. The radial velocity curve constructed has a semi-amplitude of 23.8 ± 3.1 km s-1. Combined with other measured system parameters, a dynamically determined neutron star mass of 1.4  ±  0.2–1.6  ±  0.3 M⊙ is found. The mass range of the B0-B1 I donor was 18.6  ±  0.8–21.8  ±  2.4 M⊙. These lower and upper limits were obtained under the assumption that the system is viewed edge-on (i = 90° with β = 0.89) for the lower limit and the donor fills its Roche lobe (β = 1 with i = 73.1°) for the upper limit respectively.

Problems for P-Monge-Ampere Equations

2010 Mathematics Subject Classification: 35A23, 35B51, 35J96, 35P30, 47J20, 52A40.

Asymptotic Solution for the Two Body Problem with Radial Perturbing Acceleration

In this article, an approximate analytical solution for the two body problem perturbed by a radial, low acceleration is obtained, using a regularized formulation of the orbital motion and the method of multiple scales. The results reveal that the physics of the problem evolve in two fundamental scales of the true anomaly. The first one drives the oscillations of the orbital parameters along each orbit. The second one is responsible of the long-term variations in the amplitude and mean values of these oscillations. A good agreement is found with high precision numerical solutions.

Radial Distortion Self-Calibration

In cameras with radial distortion, straight lines in space are in general mapped to curves in the image. Although epipolar geometry also gets distorted, there is a set of special epipolar lines that remain straight, namely those that go through the distortion center. By finding these straight epipolar lines in camera pairs we can obtain constraints on the distortion center(s) without any calibration object or plumbline assumptions in the scene. Although this holds for all radial distortion models we conceptually prove this idea using the division distortion model and the radial fundamental matrix which allow for a very simple closed form solution of the distortion center from two views (same distortion) or three views (different distortions). The non-iterative nature of our approach makes it immune to local minima and allows finding the distortion center also for cropped images or those where no good prior exists. Besides this, we give comprehensive relations between different undistortion models and discuss advantages and drawbacks.

Node adaptation for global collocation with radial basis functions using direct multisearch for multiobjective optimization

Meshless methods are used for their capability of producing excellent solutions without requiring a mesh, avoiding mesh related problems encountered in other numerical methods, such as finite elements. However, node placement is still an open question, specially in strong form collocation meshless methods. The number of used nodes can have a big influence on matrix size and therefore produce ill-conditioned matrices. In order to optimize node position and number, a direct multisearch technique for multiobjective optimization is used to optimize node distribution in the global collocation method using radial basis functions. The optimization method is applied to the bending of isotropic simply supported plates. Using as a starting condition a uniformly distributed grid, results show that the method is capable of reducing the number of nodes in the grid without compromising the accuracy of the solution. (C) 2013 Elsevier Ltd. All rights reserved.

Radial measures of public services deficit for regional allocation of public funds

The goal of this paper is to present an optimal resource allocation model for the regional allocation of public service inputs. Theproposed solution leads to maximise the relative public service availability in regions located below the best availability frontier, subject to exogenous budget restrictions and equality ofaccess for equal need criteria (equity-based notion of regional needs). The construction of non-parametric deficit indicators is proposed for public service availability by a novel application of Data Envelopment Analysis (DEA) models, whose results offer advantages for the evaluation and improvement of decentralised public resource allocation systems. The method introduced in this paper has relevance as a resource allocation guide for the majority of services centrally funded by the public sector in a given country, such as health care, basic and higher education, citizen safety, justice, transportation, environmental protection, leisure, culture, housing and city planning, etc.

On the differential evolution algorithm and its appliation to training radial basis function networks

The parameter setting of a differential evolution algorithm must meet several requirements: efficiency, effectiveness, and reliability. Problems vary. The solution of a particular problem can be represented in different ways. An algorithm most efficient in dealing with a particular representation may be less efficient in dealing with other representations. The development of differential evolution-based methods contributes substantially to research on evolutionary computing and global optimization in general. The objective of this study is to investigatethe differential evolution algorithm, the intelligent adjustment of its controlparameters, and its application. In the thesis, the differential evolution algorithm is first examined using different parameter settings and test functions. Fuzzy control is then employed to make control parameters adaptive based on an optimization process and expert knowledge. The developed algorithms are applied to training radial basis function networks for function approximation with possible variables including centers, widths, and weights of basis functions and both having control parameters kept fixed and adjusted by fuzzy controller. After the influence of control variables on the performance of the differential evolution algorithm was explored, an adaptive version of the differential evolution algorithm was developed and the differential evolution-based radial basis function network training approaches were proposed. Experimental results showed that the performance of the differential evolution algorithm is sensitive to parameter setting, and the best setting was found to be problem dependent. The fuzzy adaptive differential evolution algorithm releases the user load of parameter setting and performs better than those using all fixedparameters. Differential evolution-based approaches are effective for training Gaussian radial basis function networks.

Bernoulli correction to viscous losses: Radial flow between two parallel discs

For a massless fluid (density = 0), the steady flow along a duct is governed exclusively by viscous losses. In this paper, we show that the velocity profile obtained in this limit can be used to calculate the pressure drop up to the first order in density. This method has been applied to the particular case of a duct, defined by two plane-parallel discs. For this case, the first-order approximation results in a simple analytical solution which has been favorably checked against numerical simulations. Finally, an experiment has been carried out with water flowing between the discs. The experimental results show good agreement with the approximate solution

A cell by cell anisotropic adaptive mesh ALE scheme for the numerical solution of the Euler equations

In this paper a cell by cell anisotropic adaptive mesh technique is added to an existing staggered mesh Lagrange plus remap finite element ALE code for the solution of the Euler equations. The quadrilateral finite elements may be subdivided isotropically or anisotropically and a hierarchical data structure is employed. An efficient computational method is proposed, which only solves on the finest level of resolution that exists for each part of the domain with disjoint or hanging nodes being used at resolution transitions. The Lagrangian, equipotential mesh relaxation and advection (solution remapping) steps are generalised so that they may be applied on the dynamic mesh. It is shown that for a radial Sod problem and a two-dimensional Riemann problem the anisotropic adaptive mesh method runs over eight times faster.

Nematic and columnar ordering of a PEG-peptide conjugate in aqueous solution

The self-assembly in aqueous solution of a PEG-peptide conjugate is studied by spectroscopy, electron microscopy, rheology and small-angle Xray and neutron scattering (SAXS and SANS). The peptide fragment, FFKLVFF is based on fragment KLVFF of the amyloid beta-peptide, A beta(16-20), extended by two hydrophobic phenylalanine units. This is conjugated to PEG which confers water solubility and leads to distinct self-assembled structures. Small-angle scattering reveals the formation of cylindrical fibrils comprising a peptide core and PEG corona. This constrained structure leads to a model parallel beta-sheet self-assembled structure with a radial arrangement of beta sheets. Oil increasing concentration, successively nematic and hexagonal columnar phases are formed. The flow-induced alignment of both structures was studied in situ by SANS using a Couette cell. Shear-induced alignment is responsible for the shear thinning behaviour observed by dynamic shear rheometry. Incomplete recovery of moduli after cessation of shear is consistent with the observation from SANS of retained orientation in the sample.

Avaliação mesoscópica da origem, distribuição e ramificação do nervo radial no braço do gato doméstico (Felis catus domesticus, Linnaeus, 1758)

The present study evaluated the origin, distribution and ramification of the radial nerves were studied in 30 adult domestic cats. The sample included 15 females and 15 males of unknown breed. The specimens were fixed in 10% formaldehyde solution. The radial nerve showed many fascicles from the origin also your ramification in superficial and deep branches. Radial nerves were observed to originate, in 16 cases (26.7%), from the ventral branch of the sixth cervical spinal nerve; in 60 cases (100%), from the ventral branch of the seventh cervical spinal nerve; in 60 cases (100%), from the ventral branch of the eight cervical nerve and in 60 cases (100%), from the ventral branch of the first thoracic nerve. The radial nerves branched out, in all of the animals studied (100.0%), to the tensor fasciae antebrachii, long, accessory, medial and lateral heads of the triceps branchii and anconeus muscles. The radial nerve emits of 14 to 25 nervous branches in this region. However, the branch of the sixth cervical spinal nerve and the nervous fascicles reveal significant differences (p <= 0.05), respectively, in or with relation to sex of the animals and the studied region.