Betão betuminoso com betume anti-querosene Formulação, aplicação e comportamento

Mestrado em Engenharia Geotécnica e Geoambiente

Avaliação da eficiência das técnicas ESI-MS e ATR/FTIR na determinação de adulteração de BX com querosene e óleo residual

Direct infusion electrospray ionization mass spectrometry in the negative ion mode, ESI(-)-MS and Fourier transform infrared spectroscopy (FTIR) were used together with partial least squares (PLS) as a tool to determine B3 adulteration (B3 - mixture of 3% v/v of biodiesel in diesel) with kerosene and residual oil.

Estudo da efetividade da atenuação natural de compostos BTEX em área contaminada por querosene de aviação

Pós-graduação em Geociências e Meio Ambiente - IGCE

Estudo do efeito da adição de gás condensado sobre o ponto de fluidez e a viscosidade de petróleos pesados

Neste trabalho foi estudado o comportamento de quatro óleos pesados, com densidade API variando de 13,7 a 21,6, frente à adição de gás condensado, com o objetivo de se obter informações relevantes para o processo de escoamento destes óleos. Assim, foi analisado o comportamento da densidade à 20 °C, pontos de fluidez máximo e mínimo, e viscosidade dinâmica à 50 °C dos óleos contendo diferentes concentrações de gás condensado. Também foi analisado o efeito da variação da temperatura sobre a viscosidade dos óleos crus, e, adicionalmente, após o estudo do efeito do gás condensado sobre os óleos, foi avaliado o comportamento da viscosidade dinâmica dos mesmos com a adição de diferentes solventes orgânicos (querosene, aguarrás e tolueno). Os resultados obtidos indicaram que o gás condensado foi eficiente para a redução da densidade, dos pontos de fluidez máximo e mínimo e da viscosidade dos quatros óleos analisados. O óleo A apresentou uma taxa de decaimento da densidade mais baixa do que os outros óleos e foi o que apresentou o comportamento mais próximo de mistura ideal. A amostra de óleo mais pesada (óleo D) foi a que apresentou as maiores variações nos valores dos pontos de fluidez máximo e mínimo com a adição de condensado, chegando a reduzir um total de 19 °C no ponto de fluidez máximo e um total de 21 °C no ponto de fluidez mínimo com a adição de apenas 10,7% v/v de gás condensado. Nos resultados obtidos nas análises da viscosidade dinâmica observou-se que a grande maioria das misturas preparadas apresentou um comportamento de fluido newtoniano. Todas as amostras apresentaram uma notável diminuição da sua viscosidade, chegando a atingir valores percentuais de redução de viscosidade que variaram entre 75 e 91%, na concentração de 14% v/v de gás condensado. A partir desta concentração a viscosidade continua a decair, porém de forma mais atenuada, e o uso do condensado acima desta concentração pode significar gastos desnecessários com o solvente com a finalidade de se reduzir a viscosidade de óleos pesados. O óleo D foi o que apresentou os maiores percentuais de redução da viscosidade enquanto o óleo B foi o que apresentou os mais baixos valores. Comparando o gás condensado aos outros três solventes orgânicos testados, o condensado apresentou um comportamento bem semelhante ao tolueno quando analisadas as suas capacidades de redução da viscosidade dos óleos estudados.

Acarianos infestadores de culturas de cogumelos: Biologia - Classificação - Métodos de combate

São resumidas as referências encontradas na literatura sôbre infestações de acarianos em culturas de cogumelos e as dificuldades encontradas para exterminá-los. Descrevem-se com detalhes as características das culturas infestadas que permitem a suspeita e mesmo certeza de infestação pela simples observação da cultura. É feito um estudo sôbre a morfologia, evolução e hábitos dos acarianos que infestaram a micoteca do Instituto Oswaldo Cruz, provávelmente Tyroglyphus longior e Tarsonemus floricolus. São descritas as experiências feitas com várias drogas no sentido de combater os acarianos. Finalmente os autores aconselham o uso do querosene em larga escala não só para matar os acarianos como também para evitar novas infestações. O querosene deverá ser pingado externamente nas rõlhas de algodão dos tubos de cultura e aplicado largamente sôbre suportes, armários, etc.; as placas de petri deverão ser colocadas sôbre papel de filtro embebido em querosene.

Aplicação de sistemas microemulsionados ácidos em acidificação de poços

Stimulation operations have with main objective restore or improve the productivity or injectivity rate in wells. Acidizing is one of the most important operations of well stimulation, consist in inject acid solutions in the formation under fracture formation pressure. Acidizing have like main purpose remove near wellbore damage, caused by drilling or workover operations, can be use in sandstones and in carbonate formations. A critical step in acidizing operation is the control of acid-formation reaction. The high kinetic rate of this reaction, promotes the consumed of the acid in region near well, causing that the acid treatment not achive the desired distance. In this way, the damage zone can not be bypassed. The main objective of this work was obtain stable systems resistant to the different conditions found in field application, evaluate the kinetic of calcite dissolution in microemulsion systems and simulate the injection of this systems by performing experiments in plugs. The systems were obtained from two non ionic surfactants, Unitol L90 and Renex 110, with sec-butanol and n-butanol like cosurfactants. The oily component of the microemlsion was xilene and kerosene. The acqueous component was a solution of HCl 15-26,1%. The results shown that the microemulsion systems obtained were stable to temperature until 100ºC, high calcium concentrations, salinity until 35000 ppm and HCl concentrations until 25%. The time for calcite dissolution in microemulsion media was 14 times slower than in aqueous HCl 15%. The simulation in plugs showed that microemulsion systems promote a distributed flux and promoted longer channels. The permeability enhancement was between 177 - 890%. The results showed that the microemulsion systems obtained have potential to be applied in matrix acidizing

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Metagenômica: busca de novos genes envolvidos com a biodegradação de hidrocarbonetos

Industrial activities, oil spills and its derivatives, as well as the incomplete combustion of fossil fuels have caused a great accumulation of hydrocarbons in the environment. The number of microorganisms on the planet is estimated at 1030 and prokaryotes the most abundant. They colonized diverse environments for thousands of years, including those considered extreme and represent an untapped source of metabolic and genetic diversity with a large biotechnological potential. It is also known that certain microorganisms have the enzymatic capacity to degrade petroleum hydrocarbons and, in many ecosystems, there is an indigenous community capable of performing this function. The metagenomic has revolutionized the microbiology allowing access uncultured microbial communities, being a powerful tool for elucidation of their ecological functions and metabolic profiles, as well as for identification of new biomolecules. Thus, this study applied metagenomic approaches not only for functional selection of genes involved in biodegradation and emulsification processes of the petroleum-derived hydrocarbons, but also to describe the taxonomic and metabolic composition of two metagenomes from aquatic microbiome. We analyzed 123.116 (365 ± 118 bp) and 127.563 sequences (352 ± 120 bp) of marine and estuarine metagenomes, respectively. Eight clones were found, four involved in the petroleum biodegradation and four were able to emulsify kerosene indicating their abilities in biosurfactants synthesis. Therefore, the metagenomic analyses performed were efficient not only in the search of bioproducts of biotechnological interest and in the analysis of the functional and taxonomic profile of the metagenomes studied as well

Aplicação de microemulsões na solubilização de frações pesadas de petróleo

This work presents studies related to the use of microemulsions in the solubilization of heavy crude oil fractions responsible by the formation of deposits. The first stage of the work was addressed to the construction of phases diagrams, with the intention of determining the area within which the microemulsion is formed. The following systems were studied: UNITOL L 90 n-Butanol - Water - Kerosene (system 1); UNITOL L 90 - n-Butanol - Water - Xylene (system 2); UNITOL L 90 n-Butanol - Water - Kerosene/Xylene 10% (system 3); UNITOL L 90 - Sec-Butanol - Water - Xylene (system 4). In parallel experiments of physical adsorption were carried out by the static method, with the intention of simulating natural conditions of reservoirs. Crude oil of the Fazenda Belém field (Rio Grande do Norte), was used as solute, xylene as solvent and the Assu sandstone (Rio Grande do Norte, Brazil) and Botucatu sandstone (Paraná, Brazil) as rock reservoirs. The curves of adsorption presented the S format type, in agreement with the classification proposed by Giles, Smith and Huitson (1974). The solubilization process was accomplished in the batch method, by varying the time of agitation, the microemulsions and the solid/solution ratio. The experiments showed that the microemulsions presented high efficiency in the solubilization of the crude oil adsorbed on the sandstones. System 2 presented an efficiency of 99% for the Assu sandstone and 97% for the Botucatu sandstone