Failure mechanism under tensile loads in CFRP 0-90º cross-ply laminates containing voids

The failure mechanism of a voided CFRP 0-90° cross-ply laminate under tensile loads applied in one direction was studied in this Final Degree Project. For this purpose, voided coupons were manufactured for being tested and a FEA was done. In both investigations, voids were placed in 90º and 0º direction, in order to understand the void location influence. On the one hand, the behaviour of the voided laminates was investigated through a FEM in order to preview the stress distribution within the material. On the other hand, voided specimens where manufactured by applying blowing agent in between the inner layers. These specimens were tested by a quasi-static step wise tensile test where data showing its real behaviour was collected. Specimens were X-rayed after each step of the test in order to investigate the failure mechanism of the composite. Data from the test was studied so that relations such as strength of the laminates, crack density per stress, void length per first crack at the void and void area per first crack at the specimen could be characterized

Freeze-Thaw Durability of Concretes with Infilling of Ettringite in Voids, Phase 2, MLR-94-9, 1997

Examination of field portland cement concrete cores, from Iowa pavements with premature deterioration, reveals extensive infilling of calcium sulfate aluminum (CSA) compound in their air voids. A previous study (Phase I) has shown some evidence of the correlation between freeze-thaw durability of concretes and ettringite infilling. To further verify the previous observation, a more extensive experimental program was conducted in this Phase 2 study. A total of 101 concrete mixes were examined. Seven cements, six fly ashes, two water reducers and three coarse aggregates were used in the concrete mixes. Specimens were under moist curing for up to 223 days before being subjected to the freeze-thaw cycling. An environmental treatment consisting of three consecutive wet [70 deg F (21 deg C) in distilled water]/dry [120 deg F (49 deg C) in oven] cycles was applied to some specimens. Immediately prior to the freeze-thaw cycling, most specimens were examined by a low-vacuum scanning electron microscope (SEM) for their microstructure. The results obtained further demonstrate the correlation between concrete freeze-thaw response and CSA compound infilling in the air voids. The extent of the infilling depends on the period of moist curing as well as the wet/dry treatment. The extent of the infilling also relates to materials used. Concrete mixes with extensive infilling are more vulnerable to the freeze-thaw attack. Based on the obtained results, material criteria on cements and fly ashes for mainline paving were proposed for minimizing potential infilling of CSA compound in concrete.

Institutional environment in North Korea: market structure and overcoming institutional voids

Tutkimus sai innoituksensa, kun tutkija huomasi tarpeen liiketaloudelliselle, ajantasaiselle ja realistiselle tutkimukselle Pohjois-Korean markkinoista, joka kuvailisi markkinoiden olemassaolevia ja puuttuvia rakenteita sekä tutkisi mahdollisuuksia ylittää puuttuvat rakenteet. Institutionaalinen teoria valittiin sopivaksi viitekehykseksi kuvailla ja tutkia markkinarakennetta. Tutkimuskysymys muotoiltiin seuraavasti: “Miten ulkomaiset yritykset voivat reagoida puuttuviin markkinarakenteisiin Pohjois-Koreassa?”. Tutkimuskysymys jaettiin kolmeen osakysymykseen: (1) Millainen on Pohjois-Korean markkinoiden institutionaalinen ympäristö? (2) Mitkä ovat merkittävimmät puuttuvat markkinarakenteet Pohjois-Koreassa? (3) Mitä mahdollisuuksia ulkomaisilla yrityksillä voisi olla reagoida puuttuviin markkinarakenteisiin? Tutkimus toteutettiin kvalitatiivisena, koska tutkimuskysymys on deskriptiivinen. Aineisto kerättiin asiantuntijahaastattelun ja kvalitatiivisen sisällönanalyysin keinoin. Primääriaineiston muodostavat 2 asiantuntijahaastattelua ja sekundääriaineiston muodostavat 95 artikkelia, jotka kerättiin 40 lähteestä. Aineisto analysoitiin kvalitatiivisen sisällönanalyysin keinoin. Aineisto koodattiin, luokiteltiin ja esitettiin kokonaisuuksina luokittelurungon avulla, joka laadittiin tutkimusta varten muodostetun teoreettisen viitekehyksen mukaan. Tulokset ja johtopäätökset voidaan tiivistää seuraavasti. (1) Pohjois-Korean markkinan instituutioihin vaikuttaa kaksoisrakenne, jossa muodollinen, sosialistinen rakenne ja epämuodollinen, markkinalähtöinen rakenne toimivat päällekkäin. (2) Puuttuvia rakenteita on sekä markkinan kontekstissa että markkinatasolla. Puutteet ovat osittain seurausta vanhojen rakenteiden korvaantumisesta uusilla, jotka eivät ole institutionalisoituneet. (3) Yritykset voivat käyttää samoja mahdollisuuuksia reagoida puuttuviin markkinarakenteisiin Pohjois-Koreassa, joita kehittyvien markkinoiden yhteydessä on esitetty. Sen tulkittiin vähentävän käsitystä, jonka mukaan Pohjois-Korean markkina on liian erikoinen yritystoiminnalle. (4) Kasvava keskiluokka sekä yrittäjyyden ja naisten yhä merkittävämpi rooli liike-elämässä aiheuttavat alhaalta ylöspäin suuntautuvaa kehitystä markkinoilla. Nämä ovat merkkejä viimeaikaisesta kehityksestä, jotka eivät ole saaneet laajaa huomiota länsimaisessa mediassa. Se korostaa tarvetta liiketaloudelliselle, ajantasaiselle jatkotutkimukselle Pohjois-Korean markkinoista.

Institutional environment in North Korea: market structure and overcoming institutional voids

The research was sparked by an exchange in South Korea, as the author identified a gap in research that provides economic, up to date and realistic information about the North Korean market in English language. A need for a research was identified that would describe the market’s existing and missing market structures and explore possibilities to overcome the missing market structures. Institutional theory was chosen as a suitable framework to describe and explore the market. The research question was formulated as follows: “How can foreign companies overcome institutional voids in the North Korean market?”. To answer the research question, it was divided into three sub-questions as follows: (1) What is the institutional environment in North Korea like? (2) What are the major institutional voids in the North Korean market? (3) What possibilities do foreign companies have to overcome institutional voids? The research is qualitative by nature due to the descriptive and exploratory nature of the research question. Data collection consisted of expert interview and content analysis, resulting in primary data of two interviews and secondary data of 95 articles from 40 different sources. The data was analyzed with the systematical technique of content analysis. The data was coded, classified and presented as concepts with the help of a classification system that was build following the theoretical framework adapted for this study. The findings can be summarized as follows. (1) The market institutions are characterized by an overlapping dual system of formal, socialist structures and informal, market-oriented structures. (2) Institutional voids prevail on both the market’s contextual and on the market level. They are partly result of old institutions being replaced by new institutions that lack institutionalization. (3) Identified possibilities to overcome institutional voids correspond with possibilities drawn from previous research. This decreases the image of North Korea as an impossibly unique market to operate in. (4) Emerging middle class, rapidly growing entrepreneurial activities and women’s increasing role in business drive a down-to-up change in the market. This signals the recent development of the market, yet has been overlooked in the Western media. Thus there is a need for further economic, up to date research concerning North Korea.

Winning in Brazil: how institutional voids affect the entry decision making process of foreign venture capital firms coming to Brazil

The master thesis for the achievement of the academic status master of science in international management (MPGI) will aim to solve the research question of how institutional voids affect the entry decision-making process of foreign venture capital firms coming to Brazil. This is a timely matter since in the past years there has been a sudden eruption of foreign VC involvement in Brazil. Based on the actionable framework by Khanna and Palpeu (2010) we conducted quantitative as well as qualitative research with two sets of interview partners in a two-phase analysis. We interviewed experts from VC firms, foreign VC firms based in Brazil and perspective VC firms that are looking to come to Brazil. We started with the former, derived lessons learned and analyzed how they affect the latter in reaching a decision. As we expected we found that depending on the industry that ventures are in, institutional voids can either pose an opportunity or a threat and hence attract or push away potential VC firms entering Brazil. Opportunities exist especially when exploiting institutional voids, for example through ventures in the marketplace efficiency. Threats are posed by investments in for instance hard infrastructure, where the economic, political and judicial systems as well as corruption and bureaucracy play demanding roles.

Influence of voids on the flexural resistance of the NCF/RTM6 composites

A major difficulty to achieve maximum weight savings in the manufacture of composite structural components, is the tendency of these materials have the formation of voids and cracks in the interior and surface components. In aeronautical applications, controlling the volume fraction of fibers, resins and empty the components of composite is very hard. In this work, composites of epoxy matrix RTM6 reinforced with NCF (non crimp fabric carbon) processed by resin transfer molding (RTM) were characterized for porosity (P-ap) and density (rho(ad)). We used a method based on Archimedes' principle (ASTM C830) and the technique of helium pycnometer. The porosity values were compared with those determined by acid digestion (ASTM D3171). The mechanical properties of processed composites was evaluated by testing on the performing flexural and the results were correlated with the porosity value. All techniques tested to determine void content are satisfactory. The differents results can be justified for heterogeneous void distribution on laminate and differences among techniques characteristics. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

Influence of voids in the hybrid layer based on self-etching adhesive systems: a 3-D FE analysis

The presence of porosities at the dentin/adhesive interface has been observed with the use of new generation dentin bonding systems. These porosities tend to contradict the concept that etching and hybridization processes occur equally and simultaneously. Therefore, the aim of this study was to evaluate the micromechanical behavior of the hybrid layer (HL) with voids based on a self-etching adhesive system using 3-D finite element (FE) analysis. Three FE models (Mr) were built: Mr, dentin specimen (41x41x82 μm) with a regular and perfect (i.e. pore-free) HL based on a self-etching adhesive system, restored with composite resin; Mp, similar to M, but containing 25% (v/v) voids in the HL; Mpp, similar to Mr, but containing 50% (v/v) voids in the HL. A tensile load (0.03N) was applied on top of the composite resin. The stress field was obtained by using Ansys Workbench 10.0. The nodes of the base of the specimen were constrained in the x, y and z axes. The maximum principal stress (σmax) was obtained for all structures at the dentin/adhesive interface. The Mpp showed the highest peak of σmax in the HL (32.2 MPa), followed by Mp (30 MPa) and Mr (28.4 MPa). The stress concentration in the peritubular dentin was high in all models (120 MPa). All other structures positioned far from voids showed similar increase of stress. Voids incorporated into the HL raised the σmax in this region by 13.5%. This behavior might be responsible for lower bond strengths of self-etching and single-bottle adhesives, as reported in the literature.

Influence of root canal sealer on the radiographic appearance of filling voids in maxillary single-rooted teeth

Objective: This study compared the influence of three epoxy resin-based sealers with distinct radiopacities on the observers' ability to detect root canal filling voids during radiographic analysis. Material and methods: The root canals of 48 extracted maxillary canines were prepared and divided into three groups. Each group was laterally condensed with one sealer (AH Plus (TM), Acroseal (R) or a non-radiopaque sealer), and a longitudinal void was simulated in half of the specimens from each group (n = 8). Buccolingual radiographs were obtained and randomly interpreted for voids by a radiologist and an endodontist in a blinded fashion. Teeth were cut and inspected under a microscope to confirm the position of void. Differences in sensitivity and specificity between groups and examiners were compared using the Fisher's Exact and McNemar tests, respectively (alpha = 0.05). Results: Significantly lower sensitivity levels (p<0.05) were observed in the coronal portion of fillings performed with both radiopaque sealers. Specificity values for Acroseal (R) were significantly higher (p<0.05) in the coronal and apical portions of fillings. Conclusion: The type of root canal sealer can affect the observers' ability to detect root canal filling voids during radiographic analysis of upper single-rooted teeth.

Properties of cosmic voids in dark energy simulations

The last decade has witnessed the establishment of a Standard Cosmological Model, which is based on two fundamental assumptions: the first one is the existence of a new non relativistic kind of particles, i. e. the Dark Matter (DM) that provides the potential wells in which structures create, while the second one is presence of the Dark Energy (DE), the simplest form of which is represented by the Cosmological Constant Λ, that sources the acceleration in the expansion of our Universe. These two features are summarized by the acronym ΛCDM, which is an abbreviation used to refer to the present Standard Cosmological Model. Although the Standard Cosmological Model shows a remarkably successful agreement with most of the available observations, it presents some longstanding unsolved problems. A possible way to solve these problems is represented by the introduction of a dynamical Dark Energy, in the form of the scalar field ϕ. In the coupled DE models, the scalar field ϕ features a direct interaction with matter in different regimes. Cosmic voids are large under-dense regions in the Universe devoided of matter. Being nearby empty of matter their dynamics is supposed to be dominated by DE, to the nature of which the properties of cosmic voids should be very sensitive. This thesis work is devoted to the statistical and geometrical analysis of cosmic voids in large N-body simulations of structure formation in the context of alternative competing cosmological models. In particular we used the ZOBOV code (see ref. Neyrinck 2008), a publicly available void finder algorithm, to identify voids in the Halos catalogues extraxted from CoDECS simulations (see ref. Baldi 2012 ). The CoDECS are the largest N-body simulations to date of interacting Dark Energy (DE) models. We identify suitable criteria to produce voids catalogues with the aim of comparing the properties of these objects in interacting DE scenarios to the standard ΛCDM model, at different redshifts. This thesis work is organized as follows: in chapter 1, the Standard Cosmological Model as well as the main properties of cosmic voids are intro- duced. In chapter 2, we will present the scalar field scenario. In chapter 3 the tools, the methods and the criteria by which a voids catalogue is created are described while in chapter 4 we discuss the statistical properties of cosmic voids included in our catalogues. In chapter 5 the geometrical properties of the catalogued cosmic voids are presented by means of their stacked profiles. In chapter 6 we summarized our results and we propose further developments of this work.

"Fascinating Voids: Alexander von Humboldt and the Myth of Chimborazo"

When Alexander von Humboldt reached the village of Calpi in the Andes on 22 June 1802, he was greeted with reverence and enthusiasm. Triumphal arches adorned with cotton, cloth, and silver decorated his path. The natives performed a dance in festive dress. A singer praised the explorer's expedition, which had departed three years earlier from the Spanish port of La Coruña. Like Odysseus on the isle of the Phaeacians, the traveler listened to a local rhapsodist singing about his heroic deeds. Before his adventure ended, it had already spun a popular myth. This episode, which Humboldt recorded in his diary, occurred at a significant moment. One day later, the “Second Discoverer of America” rose to even greater fame on an excursion marking in more ways than one the climax of his enterprise. Humboldt set out to climb Chimborazo (6,310 m/20,702 ft.), the mountain then thought to be the highest in the world. He was accompanied by the French botanist Aimé Bonpland (1773–1858) and the Creole nobleman and future activist Carlos Montúfar (1780–1816), as well as native guides and assistants. They climbed to heights never reached before, setting a new record and catapulting Humboldt to fame on both continents.

Urban voids, spaces of great expectations

Study and progress of urban voids. opportunities for new urban design.

Nucleation of voids in metals during diffusion and creep /

Experimental evidence is presented which proves that voids formed during diffusion in brass are heterogeneously nucleated. The nuclei appear to be oxide particles, probably ZnO. When these are removed by re-melting, voids practically do not form upon subsequent dezincification. Brass which had been freed of void nucleation catalysts exhibited a considerably reduced tendency for grain boundary cracking during creep, and increased stress-rupture life.