Yes, nós temos arquitetura moderna! Reconstituição e análise da arquitetura residencial moderna em Natal das décadas de 50 e 60

Brazilian architecture was recognized because of the consecration of the icons of the Carioca and Paulista schools which are represented nationally and internationally by names like Niemeyer, Lucio Costa and Vilanova Artigas, among others. Because of this, classic studies dedicated to the Brazilian case look to present the Southeastern region with the title of father of modern Brazil, at the cost of subjugating various other modern movements and peripheral sayings, whether their values are known or forgotten. On the other hand, there has been an effort, in the sense of registering and analyzing these regional productions of modern Brazilian architecture, an assignment that DOCOMOMO Brasil participates firmly through initiatives like the creation of a Library to aid in the documentation and registration of modernity in Brazil. Inside this context of insertions of the National-Modern scheme, this work has as its objective to present modern potiguar (northern Brazil) architecture through its contemporary residential examples, investigating specifically its constructive, formal aspects, that together that together demonstrate one more architectural emphasis of modern Brazilian architecture: the potiguar. This way, by contributing to the work of the register and the documentation of the Modern Movement and attributing to the modern architecture of Natal it s real worth, we can say: Yes, we have modern architecture

Yes, nós temos arquitetura moderna! Reconstituição e análise da arquitetura residencial moderna em Natal das décadas de 50 e 60

Brazilian architecture was recognized because of the consecration of the icons of the Carioca and Paulista schools which are represented nationally and internationally by names like Niemeyer, Lucio Costa and Vilanova Artigas, among others. Because of this, classic studies dedicated to the Brazilian case look to present the Southeastern region with the title of father of modern Brazil, at the cost of subjugating various other modern movements and peripheral sayings, whether their values are known or forgotten. On the other hand, there has been an effort, in the sense of registering and analyzing these regional productions of modern Brazilian architecture, an assignment that DOCOMOMO Brasil participates firmly through initiatives like the creation of a Library to aid in the documentation and registration of modernity in Brazil. Inside this context of insertions of the National-Modern scheme, this work has as its objective to present modern potiguar (northern Brazil) architecture through its contemporary residential examples, investigating specifically its constructive, formal aspects, that together that together demonstrate one more architectural emphasis of modern Brazilian architecture: the potiguar. This way, by contributing to the work of the register and the documentation of the Modern Movement and attributing to the modern architecture of Natal it s real worth, we can say: Yes, we have modern architecture

Yes, nós temos arquitetura moderna! Reconstituição e análise da arquitetura residencial moderna em Natal das décadas de 50 e 60

Brazilian architecture was recognized because of the consecration of the icons of the Carioca and Paulista schools which are represented nationally and internationally by names like Niemeyer, Lucio Costa and Vilanova Artigas, among others. Because of this, classic studies dedicated to the Brazilian case look to present the Southeastern region with the title of father of modern Brazil, at the cost of subjugating various other modern movements and peripheral sayings, whether their values are known or forgotten. On the other hand, there has been an effort, in the sense of registering and analyzing these regional productions of modern Brazilian architecture, an assignment that DOCOMOMO Brasil participates firmly through initiatives like the creation of a Library to aid in the documentation and registration of modernity in Brazil. Inside this context of insertions of the National-Modern scheme, this work has as its objective to present modern potiguar (northern Brazil) architecture through its contemporary residential examples, investigating specifically its constructive, formal aspects, that together that together demonstrate one more architectural emphasis of modern Brazilian architecture: the potiguar. This way, by contributing to the work of the register and the documentation of the Modern Movement and attributing to the modern architecture of Natal it s real worth, we can say: Yes, we have modern architecture

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Otimização de vazão de poços injetores em projeto de injeção de água utilizando simulação por linhas de fluxo

Until the early 90s, the simulation of fluid flow in oil reservoir basically used the numerical technique of finite differences. Since then, there was a big development in simulation technology based on streamlines, so that nowadays it is being used in several cases and it can represent the physical mechanisms that influence the fluid flow, such as compressibility, capillarity and gravitational segregation. Streamline-based flow simulation is a tool that can help enough in waterflood project management, because it provides important information not available through traditional simulation of finite differences and shows, in a direct way, the influence between injector well and producer well. This work presents the application of a methodology published in literature for optimizing water injection projects in modeling of a Brazilian Potiguar Basin reservoir that has a large number of wells. This methodology considers changes of injection well rates over time, based on information available through streamline simulation. This methodology reduces injection rates in wells of lower efficiency and increases injection rates in more efficient wells. In the proposed model, the methodology was effective. The optimized alternatives presented higher oil recovery associated with a lower water injection volume. This shows better efficiency and, consequently, reduction in costs. Considering the wide use of the water injection in oil fields, the positive outcome of the modeling is important, because it shows a case study of increasing of oil recovery achieved simply through better distribution of water injection rates

Produção em revista : Representação do moderno e do regional na experiência potiguar anos 1920

This work brings some reading about a few Norte-rio-grandenses writers collaborations published in literary papers which circulated during the third decade of the twentieth century in Brazil, in a way of enlarging the understanding of how the cultural debate was carried out in the years of the definition of the Brazilian Modernism, based on the relationships between literature and culture. Under the genres of prose and poetry, the selected textual collaborations for analysis have brought the traces of a small group of articulated authors in the Brazilian cultural scenery from the 1920 s, concerning the issues of the modern (linked to the modernist renovation) and the regional (under the aspects of the tradition). The set of the analyzed collaborations is representative of a modern-regional cultural practice marked by a tendency either local or cosmopolitan, thus, sharing a large dimension of the formation of the modern literary tradition, marked by different kinds of practices which give form to the project of a collective national awareness. The characterization of the existence of an intellectual field with big links, however with its own characteristics and a certain autonomy, which also gets integrated to the cultural debate of the so-called modernist years through the literary vehicles, gives to these intellectual people a co-participation in the renewing movement in the formation context of the brazilian cultural modernity of the early twentieth century

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Otimização de vazão de poços injetores em projeto de injeção de água utilizando simulação por linhas de fluxo

Until the early 90s, the simulation of fluid flow in oil reservoir basically used the numerical technique of finite differences. Since then, there was a big development in simulation technology based on streamlines, so that nowadays it is being used in several cases and it can represent the physical mechanisms that influence the fluid flow, such as compressibility, capillarity and gravitational segregation. Streamline-based flow simulation is a tool that can help enough in waterflood project management, because it provides important information not available through traditional simulation of finite differences and shows, in a direct way, the influence between injector well and producer well. This work presents the application of a methodology published in literature for optimizing water injection projects in modeling of a Brazilian Potiguar Basin reservoir that has a large number of wells. This methodology considers changes of injection well rates over time, based on information available through streamline simulation. This methodology reduces injection rates in wells of lower efficiency and increases injection rates in more efficient wells. In the proposed model, the methodology was effective. The optimized alternatives presented higher oil recovery associated with a lower water injection volume. This shows better efficiency and, consequently, reduction in costs. Considering the wide use of the water injection in oil fields, the positive outcome of the modeling is important, because it shows a case study of increasing of oil recovery achieved simply through better distribution of water injection rates

Preparação do (+)-±-terpineol a partir do (+)-limoneno: monoterpenos de odor agradável em um projeto para química orgânica experimental

A synthesis of (+)-±-terpineol from (+)-limonene was proposed as a project for undergraduate organic laboratory course. Terpineol is a useful flavor and fragrance compound, and several aspects of this preparation are suited for experimental organic classes, including basic techniques for extraction and analyses of essential oils, different reaction types and the possibility of a high degree of student interest.

Resolução do ibuprofeno: um projeto para disciplina de química orgânica experimental

A practical and didactic sequence of experiments was proposed to illustrate the stereochemistry concept, optically active compounds, resolution of racemates, and use of the NMR technique, including 2D-COSY for identification of organic compounds, on a laboratory course for undergraduate students. The sequence was: extractions of racemic ibuprofen and chiral naproxen from commercial tablets; syntheses of diastereoisomeric amides reacting chiral (S)-(-)-α-methylbenzylamine with (±)-ibuprofen; separation and determination of absolute configuration of amides by ¹H NMR spectroscopy and GC analysis, and hydrolysis of amides to obtain (+)- and (-)-ibuprofen.

Projeto de um cortador de base para colhedora de cana-de-açúcar utilizando otimização matemática

A base-cutter represented for a mechanism of four bars, was developed using the Autocad program. The normal force of reaction of the profile in the contact point was determined through the dynamic analysis. The equations of dynamic balance were based on the laws of Newton-Euler. The linkage was subject to an optimization technique that considered the peak value of soil reaction force as the objective function to be minimized while the link lengths and the spring constant varied through a specified range. The Algorithm of Sequential Quadratic Programming-SQP was implemented of the program computational Matlab. Results were very encouraging; the maximum value of the normal reaction force was reduced from 4,250.33 to 237.13 N, making the floating process much less disturbing to the soil and the sugarcane rate. Later, others variables had been incorporated the mechanism optimized and new otimization process was implemented .

Projeto de caixa de madeira para manga (Mangifera Indica L.)

Losses of horticulture product in Brazil are significant and among the main causes are the use of inappropriate boxes and the absence of a cold chain. A project for boxes is proposed, based on computer simulations, optimization and experimental validation, trying to minimize the amount of wood associated with structural and ergonomic aspects and the effective area of the openings. Three box prototypes were designed and built using straight laths with different configurations and areas of openings (54% and 36%). The cooling efficiency of Tommy Atkins mango (Mangifera Indica L.) was evaluated by determining the cooling time for fruit packed in the wood models and packed in the commercially used cardboard boxes, submitted to cooling in a forced-air system, at a temperature of 6ºC and average relative humidity of 85.4±2.1%. The Finite Element Method was applied, for the dimensioning and structural optimization of the model with the best behavior in relation to cooling. All wooden boxes with fruit underwent vibration testing for two hours (20 Hz). There was no significant difference in average cooling time in the wooden boxes (36.08±1.44 min); however, the difference was significant in comparison to the cardboard boxes (82.63±29.64 min). In the model chosen for structural optimization (36% effective area of openings and two side laths), the reduction in total volume of material was 60% and 83% in the cross section of the columns. There was no indication of mechanical damage in the fruit after undergoing the vibration test. Computer simulations and structural study may be used as a support tool for developing projects for boxes, with geometric, ergonomic and thermal criteria.

Crescimento, composição corporal e performance motora em crianças e adolescentes de 7 a 14 anos provenientes de familias de baixo nivel socio-economico e participantes do projeto esporte solidario, São Luis - MA

Universidade Estadual de Campinas . Faculdade de Educação Física