Effects of the extensive culture system as finishing production strategy on biometric and chemical parameters in rainbow trout

The effect of finishing extensive farming period, to reduce fat content and manipulate the fatty acid profile of fish muscle, was evaluated in rainbow trout. Fish were stocked in an artificial lake, in which fish were fed only on naturally available nutrients with no supply of artificial feed, for different lengths of time from 0 to 120 days. No weight loss was noted during the whole finishing period while total length increased from 228±7 to 269±3 mm and the condition factor decreased from 1.41±0.04 to 0.89±0.02. The total fat content of the fillets decreased considerably from 4.7±0.6% at the beginning to 2.4±0.4% and 0.7±0.2% after 45 and 120 days respectively. Fillet fatty acid composition was affected by the time of stocking in the extensive farm. In contrast to the reduction in C18:1n-9, C18:2n-6, total monounsaturated fatty acid and total n-6 percent values, an increase in the C20:5n-3, C22:6n-3, total polyunsaturated fatty acid and total n-3 percent values was observed. It was shown that while other finishing strategies for salmonids have some disadvantages, the extensive culture system seems to be a potentially useful tool for increasing the general quality of the end product.

90 Nb: potential radionuclide for application in immuno-PET : development of appropriate production strategy and first in vivo evaluation of 90 Nb-labeled monoclonal antibody

Die Nuklearmedizin ist ein modernes und effektives Werkzeug zur Erkennung und Behandlung von onkologischen Erkrankungen. Molekulare Bildgebung, die auf dem Einsatz von Radiopharmaka basiert, beinhaltet die Einzel-Photonen-Emissions-Tomographie (SPECT) und Positronenemissions¬tomographie (PET) und ermöglicht die nicht-invasive Visualisierung von Tumoren auf nano-und picomolarer Ebene.rnDerzeit werden viele neue Tracer für die genauere Lokalisierung von kleinen Tumoren und Metastasen eingeführt und hinsichtlich ihrer Eignung untersucht. Die meisten von ihnen sind Protein-basierte Biomoleküle, die die Natur selbst als Antigene für die Tumorzellen produziert. Dabei spielen Antikörper und Antikörper-Fragmente eine wichtige Rolle in der Tumor-Diagnostik und Behandlung. Die PET-Bildgebung mit Antikörpern und Antikörperfragmenten bezeichnet man als immuno-PET. Ein wichtiger Aspekt hierbei ist, dass entsprechende Radiopharmaka benötigt werden, deren Halbwertszeit mit der Halbwertszeit der Biomoleküle korreliert ist.rnIn neueren Arbeiten wird 90Nb als potenzieller Kandidat für die Anwendung in der immuno-PET vorgeschlagen. Seine Halbwertszeit von 14,6 Stunden ist geeignet für die Anwendung mit Antikörperfragmenten und einige intakten Antikörpern. 90Nb hat eine relativ hohen Anteil an Positronenemission von 53% und eine optimale Energie für die β+-Emission von 0,35 MeV, die sowohl eine hohe Qualität der Bildgebung als auch eine niedrige Aktivitätsmenge des Radionuklids ermöglicht.rnErsten grundlegende Untersuchungen zeigten: i) dass 90Nb in ausreichender Menge und Reinheit durch Protonen-Bombardierung des natürlichen Zirkonium Targets produziert, ii) aus dem Targetmaterial in entsprechender radiochemischer Reinheit isoliert und iii) zur Markierung des monoklonalen Antikörpers (Rituximab) verwendet werden kann und iv) dieser 90Nb-markierte mAb eine hohe in vitro Stabilität besitzt. Desweiteren wurde eine alternative und schnelle Abtrennungsmethode entwickelt, die es erlaubt 90Nb, mit einer geeigneten radiochemischen und radionuklidischen Reinheit für eine anschließende Markierung von Biomolekülen in einer Stunde zu aufzureinigen. Schließlich wurden erstmals 90Nb-markierte Biomolekülen in vivo untersucht. Desweiteren wurden auch Experimente durchgeführt, um den optimalen bifunktionellen Chelatbildner (BFC) für 90Niob zu finden. Mehrere BFC wurden hinsichtlich Komplexbildung mit NbV untersucht. Desferrioxamin (Df) erwies sich als geeignetster Chelator für 90Nb. Der monoklonale Antikörper Bevacizumab (Avastin®) wurde mit 90Nb markiert und eine Biodistributionsstudie und eine PET-Untersuchung durchgeführt. Alle diese Ergebnisse zeigten, dass 90Nb ein vielversprechendes Radionuklid für die Immuno-PET ist, welches sogar für weitere kommerzielle Anwendungen in der klinischen Routine geeignet zu sein scheint.rn

Land availability and biomass production potential in India

In this paper we have assessed the availability of land and the potential for biomass production in India to meet various demands for biomass, including modern bioenergy. This is estimated by considering the various demands on land and its suitability. The biomass production potential of energy plantations is assessed for different agroecological zones. The total woody biomass production is estimated to be 321 Mt, based on biomass productivity in the range 2 to 17 t/ha/yr for the different agro-ecological zones and considering the conservative estimate of 43 Mha land availability for biomass production. A surplus of 231 Mt of biomass (after meeting the increased demand for fuelwood and timber by the year 2010) is estimated to be available for energy, which has an electricity generation potential of 231 TWh. As a first step, only the feasible physical potential of biomass production is assessed, along with an analysis of barriers. The potential costs and benefits of biomass production strategy are not analysed. (C) 1999 Elsevier Science Ltd. All rights reserved.

Strategy not tactics drives aggregate planning

The aggregate planning model supposedly shows how manufacturers cope with seasonally biased sales. Unfortunately, industry has failed to embrace any of the sophisticated algorithms that were developed to solve the corresponding resources allocation problem. This paper reveals why such methods have proven so unattractive. Aggregate planning is a chimera. In practice, planners construct the master production schedule directly, in line with a preferred production strategy. A “chase” plan is the most popular choice. When this option proves infeasible, management plumps for another predetermined strategy. The resultant stockpiling brings certain financial risks. However, companies take various measures to reduce their exposure.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Production d'IgG sialylées en CHO et impact sur leurs fonctions effectrices

La sialylation des N-glycanes du fragment Fc des immunogobulines G (IgG) est une modification peu fréquente des IgG humaines. Pourtant, elle est l’objet de beaucoup d’attention depuis que deux articles fondateurs ont été publiés, qui montrent l’un que la sialylation des IgG diminue leur capacité à déclencher la cytotoxicité cellulaire dépendant de l’anticorps (ADCC), et l’autre que les IgG sialylées en α2,6 seraient la fraction efficace des IgG intraveineuses (IgIV) anti-inflammatoires. Les anticorps monoclonaux thérapeutiques, qui sont le plus souvent des IgG recombinantes produites en culture de cellules de mammifère, connaissent depuis la fin des années 90 un succès et une croissance phénoménaux sur le marché pharmaceutique. La maîtrise de la N-glycosylation du Fc des IgG est une clé de l’efficacité des anticorps monoclonaux. Si les IgG sialylées sont des molécules peu fréquentes in vivo, elles sont très rares en culture cellulaire. Dans cette étude, nous avons développé une méthode de production d’IgG avec une sialylation de type humain en cellules CHO. Nous avons travaillé principalement sur la mise au point d’une stratégie de production d’IgG sialylées par co-expression transitoire d’une IgG1 avec la β1,4-galactosyltransférase I (β4GTI) et la β-galactoside-α2,6-sialyltransférase I (ST6GalI). Nous avons montré que cette méthode permettait d’enrichir l’IgG1 en glycane fucosylé di-galactosylé mono-α2,6-sialylé G2FS(6)1, qui est le glycane sialylé présent sur les IgG humaines. Nous avons ensuite adapté cette méthode à la production d’IgG présentant des profils de glycosylation riches en acides sialiques, riches en galactose terminal, et/ou appauvris en fucosylation. L’analyse des profils de glycosylation obtenus par la co-expression de diverses combinaisons enzymatiques avec l’IgG1 native ou une version mutante de l’IgG1 (F243A), a permis de discuter des influences respectives de la sous-galactosylation des IgG1 en CHO et des contraintes structurales du Fc dans la limitation de la sialylation des IgG en CHO. Nous avons ensuite utilisé les IgG1 produites avec différents profils de glycosylation afin d’évaluer l’impact de la sialylation α2,6 sur l’interaction de l’IgG avec le récepteur FcγRIIIa, principal récepteur impliqué dans la réponse ADCC. Nous avons montré que la sialylation α2,6 augmentait la stabilité du complexe formé par l’IgG avec le FcγRIIIa, mais que ce bénéfice n’était pas directement traduit par une augmentation de l’efficacité ADCC de l’anticorps. Enfin, nous avons débuté le développement d’une plateforme d’expression stable d’IgG sialylées compatible avec une production à l’échelle industrielle. Nous avons obtenu une lignée capable de produire des IgG enrichies en G2FS(6)1 à hauteur de 400 mg/L. Cette étude a contribué à une meilleure compréhension de l’impact de la sialylation sur les fonctions effectrices des IgG, et a permis d’augmenter la maîtrise des techniques de modulation du profil de glycosylation des IgG en culture cellulaire.

Production d'IgG sialylées en CHO et impact sur leurs fonctions effectrices

La sialylation des N-glycanes du fragment Fc des immunogobulines G (IgG) est une modification peu fréquente des IgG humaines. Pourtant, elle est l’objet de beaucoup d’attention depuis que deux articles fondateurs ont été publiés, qui montrent l’un que la sialylation des IgG diminue leur capacité à déclencher la cytotoxicité cellulaire dépendant de l’anticorps (ADCC), et l’autre que les IgG sialylées en α2,6 seraient la fraction efficace des IgG intraveineuses (IgIV) anti-inflammatoires. Les anticorps monoclonaux thérapeutiques, qui sont le plus souvent des IgG recombinantes produites en culture de cellules de mammifère, connaissent depuis la fin des années 90 un succès et une croissance phénoménaux sur le marché pharmaceutique. La maîtrise de la N-glycosylation du Fc des IgG est une clé de l’efficacité des anticorps monoclonaux. Si les IgG sialylées sont des molécules peu fréquentes in vivo, elles sont très rares en culture cellulaire. Dans cette étude, nous avons développé une méthode de production d’IgG avec une sialylation de type humain en cellules CHO. Nous avons travaillé principalement sur la mise au point d’une stratégie de production d’IgG sialylées par co-expression transitoire d’une IgG1 avec la β1,4-galactosyltransférase I (β4GTI) et la β-galactoside-α2,6-sialyltransférase I (ST6GalI). Nous avons montré que cette méthode permettait d’enrichir l’IgG1 en glycane fucosylé di-galactosylé mono-α2,6-sialylé G2FS(6)1, qui est le glycane sialylé présent sur les IgG humaines. Nous avons ensuite adapté cette méthode à la production d’IgG présentant des profils de glycosylation riches en acides sialiques, riches en galactose terminal, et/ou appauvris en fucosylation. L’analyse des profils de glycosylation obtenus par la co-expression de diverses combinaisons enzymatiques avec l’IgG1 native ou une version mutante de l’IgG1 (F243A), a permis de discuter des influences respectives de la sous-galactosylation des IgG1 en CHO et des contraintes structurales du Fc dans la limitation de la sialylation des IgG en CHO. Nous avons ensuite utilisé les IgG1 produites avec différents profils de glycosylation afin d’évaluer l’impact de la sialylation α2,6 sur l’interaction de l’IgG avec le récepteur FcγRIIIa, principal récepteur impliqué dans la réponse ADCC. Nous avons montré que la sialylation α2,6 augmentait la stabilité du complexe formé par l’IgG avec le FcγRIIIa, mais que ce bénéfice n’était pas directement traduit par une augmentation de l’efficacité ADCC de l’anticorps. Enfin, nous avons débuté le développement d’une plateforme d’expression stable d’IgG sialylées compatible avec une production à l’échelle industrielle. Nous avons obtenu une lignée capable de produire des IgG enrichies en G2FS(6)1 à hauteur de 400 mg/L. Cette étude a contribué à une meilleure compréhension de l’impact de la sialylation sur les fonctions effectrices des IgG, et a permis d’augmenter la maîtrise des techniques de modulation du profil de glycosylation des IgG en culture cellulaire.

At breaking point? Challenges for Australian film policy through the lens of genre (horror) films

Cultural policy settings attempting to foster the growth and development of the Australian feature film industry in era of globalisation are coming under increasing pressure. Global forces and emerging production and distribution models are challenging the “narrowness” of cultural policy – mandating a particular film culture, circumscribing certain notions of value and limiting the variety of films produced through cultural policy driven subvention models. Australian horror film production is an important case study. Horror films are a production strategy well suited to the financial limitations of the Australian film industry with competitive advantages for producers against international competitors. However, emerging within a “national” cinema driven by public subsidy and social/cultural objectives, horror films – internationally oriented with a low-culture status – have been severely marginalised within public funding environments. This paper introduces Australian horror film production, and examines the limitations of cultural policy, and the impacts of these questions for the Producer Offset.

The ceiling to coproduction in university-industry research collaboration

The purpose of this paper is to provide insight into government attempts at bridging the divide between theory and practice through university-industry research collaboration modelled under engaged scholarship. The findings are based on data sourced from interviews with 47 academic and industry project leaders from 23 large scale research projects. The paper demonstrates a ceiling to the coproduction of knowledge arising from the preconceived beliefs of both academics and industry partners regarding project roles and responsibilities. The findings show that coproduction was constrained by academic partners assuming control over much of the research activities and industry partners failing to confront or challenge academic decision-making because both academics and industry partners placed a higher value on academic knowledge compared with applied or practical knowledge. It is argued the theory of engaged scholarship, and consequent initiatives to encourage engaged scholarship, fail to account for the superior status of academic knowledge.

Alejandro E. Bunge : una visión de la Argentina

Resumen: El autor describe la concepción económica del Ingeniero Alejandro Bunge, quien se destacó como una de las personalidades con mayor capacidad visionaria en la Argentina de la primera mitad del siglo XX. Formado en la escuela histórica alemana, Bunge comprendió muy tempranamente la necesidad de una nueva orientación para la estrategia de desarrollo de nuestro país. Orientado por los objetivos de un conocimiento exhaustivo de la realidad nacional, una nueva estrategia productiva de sesgo agroindustrial y una amplia reforma social basada en los valores cristianos, Bunge trazó un camino que, según el autor, sigue siendo un desafío pendiente para la Argentina.

Aggregate planning for seasonal demand : reconciling theory with practice

Purpose: The paper reports on the ramifications for production planning when monthly sales exhibit predictable seasonal highs and lows. The literature first acknowledged and dealt with the (aggregate planning) problem 50 years ago. Nevertheless, there is neither evidence that industry has adopted any of the mathematical techniques that were subsequently developed, nor a convincing explanation as to why not. Hence this research sets out to discover the methods manufacturers use to cope with seasonal demand, and how germane the published algorithms really are.

Design/methodology/approach: Forty-two case studies were compiled by interviewing senior managers and then conducting plant tours. No prior assumptions were made and the list of questions covered the gamut of production planning.

Findings: The main finding is that manufacturers select a straightforward production strategy, right from the outset, so the fundamental cost-balancing format is not relevant. The majority pick a “chase” strategy, since most organizations subscribe to a “just in time” ethos. Whenever a different strategy is preferred the rationale springs from skilled labour considerations or binding facilities constraints. The chosen strategy serves as a road map for resources acquisitions, and the master production schedule is constructed directly. So, the complex issue of how to disaggregate an optimal aggregate plan never even arises. Managers do not seek perfect solutions, but strive to eliminate, or contain, the most significant marginal costs. The nature of the business determines the most appropriate tactics to employ.

Originality/value: These findings break the mould as far as orthodox aggregate planning is concerned and show why theory is at odds with practice, whilst reaffirming the importance of concepts such as “flexibility”, “integration”, and “just-in-time production”.

Uma aplicação da apredizagem por reforço na otimização da produção em um campo de petróleo

The objective of reservoir engineering is to manage fields of oil production in order to maximize the production of hydrocarbons according to economic and physical restrictions. The deciding of a production strategy is a complex activity involving several variables in the process. Thus, a smart system, which assists in the optimization of the options for developing of the field, is very useful in day-to-day of reservoir engineers. This paper proposes the development of an intelligent system to aid decision making, regarding the optimization of strategies of production in oil fields. The intelligence of this system will be implemented through the use of the technique of reinforcement learning, which is presented as a powerful tool in problems of multi-stage decision. The proposed system will allow the specialist to obtain, in time, a great alternative (or near-optimal) for the development of an oil field known