Egg production curve fitting using nonlinear models for selected and nonselected lines of White Leghorn hens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of logistic and neural network models to fit to the egg production curve of White Leghorn hens

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diversity of condensed tannin structures affects rumen in vitro methane production in sainfoin (Onobrychis viciifolia) accessions

Sainfoin is a non-bloating temperate forage legume with a moderate-to-high condensed tannin (CT) content. This study investigated whether the diversity of sainfoin accessions in terms of CT structures and contents could be related to rumen in vitro gas and methane (CH4) production and fermentation characteristics. The aim was to identify promising accessions for future investigations. Accessions differed (P < 0·0001) in terms of total gas and CH4 productions. Fermentation kinetics (i.e. parameters describing the shape of the gas production curve and half-time gas production) for CH4 production were influenced by accession (P ≤ 0·038), but not by PEG. Accession, PEG and time affected (P < 0·001) CH4 production, but accession and PEG interaction showed only a tendency (P = 0·08). Increase in CH4 due to PEG addition was not related to CT content. Further analysis of the relationships among multiple traits (nutritional composition, CT structure and CH4 production) using principal component analysis (PCA) based on optimally weighted variables revealed differences among accessions. The first two principal component axes, PC1 (57·6%) and PC2 (18·4%), explained 76·0% of the total variation among accessions. Loading of biplots derived from both PCAs made it possible to establish a relationship between the ratio of prodelphinidin:procyanidin (PD:PC) tannins and CH4 production in some accessions. The PD:PC ratio seems to be an important source of variation that is negatively related to CH4 production. These results suggested that sainfoin accessions collected from across the world exhibited substantial variation in terms of their effects on rumen in vitro CH4 production, revealing some promising accessions for future investigations.

Bone mineral density of tibae and femura of broiler breeders: growth, development and production

The aim of this study was to follow-up the physiological variations in the development of the bone tissue, associating them with the egg production curve. This study was carried out in the facilities of the Faculdade de Medicina Veterinária e Zootecnia of the UNESP, Botucatu, Brazil. Twenty-three families of Ross broiler breeders were used, each family consisting of 13 females and 1 male, distributed in 23 pens of 5.0m² each. The management was that recommended by the genetic company manual (Agroceres Ross, 2003), with daily feeding until 6th week of age; and birds were fed according to a 5:2 schedule (5 days fed, 2 days of fasting) between 7 and 17 weeks of age, returning to daily feeding starting at 18 weeks of age. Birds did not receive afternoon calcium supplementation. on the fourth week of rearing, 84 females were removed for bone analyses of the right tibia and femur, using optical densitometry in radiographic images technique. These analyses were sequentially carried out in 4, 8, 12, 15, 20, 24, 30, 35, 42, 47, and 52 week-old birds. The egg production curve of the birds was followed-up and associated to bone mineral density results. For bone mineral density evaluation (BMD) birds were divided by weight categories as light, intermediate, or heavy within each data age. BMD values of the tibias were not influenced by weight range, but by the age at collection. on the other hand, interactions were found among femur BMD values and weight and age categories. There was no correlation between eggshell quality and femur BMD. A negative correlation (-0.15) was observed between tibia BMD and eggshell percentage. It was possible to conclude that the egg production has little influence on bone mineral density of the birds probably because there was no need of bone mineral mobilization during the production period, since the observed egg production was below that observed under commercial conditions.

Milk production during the colostral period is not related to the later lactational performance in dairy cows

In dairy cows, milk yield increases rapidly after parturition until a peak at around wk 6 of lactation. However, the description of the shape of the lactation curve is commonly based on weekly average milk yields. For a more detailed analysis of the milk production curve from the very beginning of lactation including the colostral period and the effect of colostrum yield on further lactational performance, the first 10 milkings after parturition, daily milk yields from d 1 to 28 of lactation, and the cumulative milk production on d 100 to 305 of lactation were investigated in 17 primiparous and 39 multiparous cows milked twice daily. Milk yield at the first milking after parturition (colostrum) ranged from 1.3 to 20.7kg (Δ=19.4kg) in multiparous and from 1.8 to 10.9kg in primiparous animals (Δ=9.1kg). At the tenth milking, milk production ranged from 9.2 to 21.5kg (Δ=12.3kg) in multiparous and from 7.0 to 15.2kg (Δ=8.2kg) in primiparous animals. Immediately after parturition, daily milk production increased rapidly, but after approximately 1wk in lactation, the slope of the daily milk production curve flattened and continued more linear. A nonlinear regression equation was used to determine this timely change, which occurred earlier in primiparous (d 6.9±0.3) than in multiparous cows (d 8.2±0.2). The correlation between the amount of first colostrum and milk production during further lactation decreased already from 0.47 on d 5 to 0.32 on d 14. In multiparous cows, the correlation between total milk production of the previous 305d standard lactation and the amount of first colostrum was not significant (correlation=0.29), whereas the correlation with the daily production increased from 0.45 on d 5 to 0.69 on d 14. However, in primiparous animals, correlations between first-colostrum yield and daily milk yields up to d 28 of lactation were not significant, possibly due to the smaller sample size compared with multiparous animals. First-colostrum yield and cumulative milk production of 100, 200, and 305 lactation days were not significantly correlated in multiparous and primiparous cows. In conclusion, the milk production during the first few milkings is widely independent from the overall production level of a cow. Potentially, genetic selection toward lower milk yield during the very first days after parturition at a simultaneously high lactational performance may be a tool to ensure sufficient colostrum quality and to reduce the metabolic load around parturition.

Modelos de dimensão finita e infinita para avaliação da produção de ovos em aves de postura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho e parâmetros fisiológicos de cabras em pastagem de capim-tobiatã (Panicum maximum cv. Tobiatã) suplementadas nas fases pré-parto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da densidade mineral óssea em matrizes pesadas por meio da técnica de densitometria óptica em imagens radiográficas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coastal upwelling and atmospheric CO2 changes

A transfer function relating diatom assemblages in surface sediments and primary production in the photic zone was used to calculate variations in primary production in hole ODP Leg 112, Site 681A over the last 400 kyr. Primary production off central Peru was enhanced during peak glaciations and it decreased during peak interglacials, but low and high production periods also occurred in both glacials and interglacials. The close resemblance of the primary production curve off Peru to the atmospheric CO2 Vostok record suggests a relationship between the Peruvian neritic biological pump and atmospheric pCO2.

A new approach for in vitro bioassay to measure tannin biological effects based on a gas production technique

The aim of this paper was to study a method based on gas production technique to measure the biological effects of tannins on rumen fermentation. Six feeds were used as fermentation substrates in a semi-automated gas method: feed A - aroeira (Astronium urundeuva); feed B - jurema preta (Mimosa hostilis), feed C - sorghum grains (Sorghum bicolor); feed D - Tifton-85 (Cynodon sp.); and two others prepared mixing 450 g sorghum leaves, 450 g concentrate (maize and soybean meal) and 100 g either of acacia (Acacia mearnsii) tannin extract (feed E) or quebracho (Schinopsis lorentzii) tannin extract (feed F) per kg (w:w). Three assays were carried out to standardize the bioassay for tannins. The first assay compared two binding agents (polyethylene glycol - PEG - and polyvinyl polypirrolidone - PVPP) to attenuate the tannin effects. The complex formed by PEG and tannins showed to be more stable than PVPP and tannins. Then, in the second assay, PEG was used as binding agent, and this assay was done to evaluate levels of PEG (0, 500, 750, 1000 and 1250 mg/g DM) to minimize the tannin effect. All the tested levels of PEG produced a response to evaluate tannin effects but the best response was for dose of 1000 mg/g DM. Using this dose of PEG, the final assay was carried out to test three compounds (tannic acid, quebracho extract and acacia extract) to establish a curve of biological equivalent effect of tannins. For this, five levels of each compound were added to I g of a standard feed (Lucerne hay). The equivalent effect showed not to be directly related to the chemical analysis for tannins. It was shown that different sources of tannins had different activities or reactivities. The curves of biological equivalence can provide information about tannin reactivity and its use seems to be important as an additional factor for chemical analysis. (C) 2007 Elsevier B.V. All rights reserved.

Do Productivity Improvements Move Us Along the Environmental Kuznets Curve?

The Environmental Kuznets Curve (EKC) hypothesis focuses on the argument that rising prosperity will eventually be accompanied by falling pollution levels as a result of one or more of three factors: (1) structural change in the economy; (2) demand for environmental quality increasing at a more-than-proportional rate; (3) technological progress. Here, we focus on the third of these. In particular, energy efficiency is commonly regarded as a key element of climate policy in terms of achieving reductions in economy-wide CO2 emissions over time. However, a growing literature suggests that improvements in energy efficiency will lead to rebound (or backfire) effects that partially (or wholly) offset energy savings from efficiency improvements. Where efficiency improvements are aimed at the production side of the economy, the net impact of increased efficiency in any input to production will depend on the combination and relative strength of substitution, output/competitiveness, composition and income effects that occur in response to changes in effective and actual factor prices, as well as on the structure of the economy in question, including which sectors are targeted with the efficiency improvement. In this paper we consider whether increasing labour productivity will have a more beneficial, or more predictable, impact on CO2/GDP ratios than improvements in energy efficiency. We do this by using CGE models of the Scottish regional and UK national economies to analyse the impacts of a simple 5% exogenous (and costless) increase in energy or labour augmenting technological progress.

Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

The objective of this work was to compare random regression models for the estimation of genetic parameters for Guzerat milk production, using orthogonal Legendre polynomials. Records (20,524) of test-day milk yield (TDMY) from 2,816 first-lactation Guzerat cows were used. TDMY grouped into 10-monthly classes were analyzed for additive genetic effect and for environmental and residual permanent effects (random effects), whereas the contemporary group, calving age (linear and quadratic effects) and mean lactation curve were analized as fixed effects. Trajectories for the additive genetic and permanent environmental effects were modeled by means of a covariance function employing orthogonal Legendre polynomials ranging from the second to the fifth order. Residual variances were considered in one, four, six, or ten variance classes. The best model had six residual variance classes. The heritability estimates for the TDMY records varied from 0.19 to 0.32. The random regression model that used a second-order Legendre polynomial for the additive genetic effect, and a fifth-order polynomial for the permanent environmental effect is adequate for comparison by the main employed criteria. The model with a second-order Legendre polynomial for the additive genetic effect, and that with a fourth-order for the permanent environmental effect could also be employed in these analyses.

Multispectral Analysis of Paper Production Phases

Paperitehtaissa paperin väriä arvioidaan L*a*b –arvojen perusteella. Tämä lähestymistapa ei ole tarkka ja johtaa siihen, että saman luokkaan kuuluvat paperit saatetaan havaita eri värisinä. Tässä diplomityössä tarkastellaan värien arviointia multispektraalisen kuvantamisen avulla. Menetelmän ajatuksena on verrata standardoidun heijastuman spektriä kohteena olevan paperirullan heijastuman spektriin mittaustapojen avulla. 12:n kirjallisuuteen perustuvan ja yhden tutkimusryhmämme kehittämän mittaustavan joukosta pyrittiin valitsemaan parhaat mittaustavat tutkimuksien perusteella. Mittaustavan tehokkuus tarkoittaa kykä tunnistaa eroavaisuuksia värisävyn, värikylläisyyden ja valoisuuden perusteella. Mittaustapoja tutkittiin sekä keinotekoisilla kuvilla että aidoilla paperinäytteillä. Tuloksena maksimi-minimi-, aritmeettisen keskiarvon minimi- ja geometrisen keskiarvon minimimenetelmä olivat parhaita mittaustapoja.

In vitro-induced antibody production in chronic hepatitis C virus infection

The objectives of the present study were to assess the in vitro-induced anti-hepatitis C virus (HCV) antibody production (IVIAP) in relation to the clinical, biochemical, virologic and histologic variables of patients with HCV infection. The study included 57 patients (60% males) with HCV infection (anti-HCV and HCV-RNA positive). Alanine aminotransferase (ALT) was elevated in 89% of the patients. Mean viral load was 542,241 copies/ml and histology of the liver showed chronic hepatitis in 27/52 (52%) and cirrhosis in 11/52 (21%) patients. IVIAP levels were determined by immunoenzymatic assay at median absorbance of 0.781 at 450 nm. IVIAP was negative in 14% of the patients. When groups with IVIAP levels above and below the median were compared, high IVIAP levels were associated with the male sex, elevated ALT levels and more advanced disease stage. After logistic regression analysis, advanced histologic damage to the liver remained as the only independent variable associated with elevated IVIAP levels. Using a receiver operator characteristic curve, the best cut-off level for IVIAP was established (= 1.540), with 71% sensitivity and 94% specificity for the detection of more advanced disease stages (grades 3 and 4). These findings are consistent with the participation of immunological mechanisms in the genesis of the hepatic lesions induced by HCV and indicate that the IVIAP test may be useful as a noninvasive marker of liver damage either alone or in combination with other markers.