A produção e circulação de saberes sobre o financiamento da educação no Brasil (1991-2005)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Production and characterization of ZrCN-Ag coatings deposited by mganetron sputtering

Tese de Doutoramento (Programa doutoral em Engenharia de Materiais)

Production and characterization of monoclonal antibodies to Brazilian isolates of bovine viral diarrhea virus

Three Brazilian isolates of bovine viral diarrhea virus (BVDV), antigenically distinct from the standard North American isolates, were selected to immunize BALB/c mice in order to obtain hybridoma cells secreting anti-BVDV monoclonal antibodies (mAbs). Two hybridoma clones secreting mAbs, reacting specifically with BVDV-infected cells (mAbs 3.1C4 and 6.F11), were selected after five fusions and screening of 1001 hypoxanthine-aminopterin-thymidine-resistant clones. These mAbs reacted in an indirect fluorescent antibody (IFA) assay with all 39 South and North American BVDV field isolates and reference strains available in our laboratory, yet failed to recognize other pestiviruses, namely the hog cholera virus. The mAbs reacted at dilutions up to 1:25,600 (ascitic fluid) and 1:100 (hybridoma culture supernatant) in IFA and immunoperoxidase (IPX) staining of BVDV-infected cells but only mAb 3.1C4 neutralized virus infectivity. Furthermore, both mAbs failed to recognize BVDV proteins by IPX in formalin-fixed paraffin-embedded tissues and following SDS-PAGE and immunoblot analysis of virus-infected cells, suggesting they are probably directed to conformational-type epitopes. The protein specificity of these mAbs was then determined by IFA staining of CV-1 cells transiently expressing each of the BVDV proteins: mAb 3.1C4 reacted with the structural protein E2/gp53 and mAb 6.F11 reacted with the structural protein E1/gp25. Both mAbs were shown to be of the IgG2a isotype. To our knowledge, these are the first mAbs produced against South American BVDV isolates and will certainly be useful for research and diagnostic purposes.

Influence of temperature on the production and infectivity of entomopathogenic nematodes against larvae and pupae of vine weevil, Otiorhynchus sulcatus, (Coleoptera: Curculionidae)

Susceptibility of late instar vine weevil Otiorhynchus sulcatus larvae and pupae to four species entomopathogenic nematodes were tested. Bioassays on production and infectivity to larvae and pupae were compared for two steinernematids and two heterorhabditis such as Steinernema carpocapsae, S. feltiae, Heterorhabditis indica and H. bacteriophora. Nematodes production of all species was determined by the number infective juveniles (IJs) established in vine weevil larvae and pupae O. sulcatus using sand and filter paper bioassay. S. feltiae produced the maximum number in larvae and pupae at 20°C as compared to other nematodes but production of H. indica, was better at 25°C in larvae and pupae followed by H. bacteriophora, S. carpocapsae and Infectivity test of larvae and pupae was also done in sand media. Infective juveniles recovered from larvae and pupae when infected with S. feltiae produced maximum infective juveniles at 20°C temperatures than all other isolates. H. bacteriophora produced higher number of IJs in larvae and pupae than all other nematode isolates at 25°C. This paper indicates the application of nematodes with the knowledge of insect pest biology represents a possible new strategy for O. sulcatus larvae and pupae.

Production and characterization of Tm3+/Yb3+ codoped waveguides based on PbO-GeO2 thin films

Fabrication and optical characterization of Tm3+/Yb3+ codoped PbO-GeO2 (PGO) pedestal-type waveguides are investigated in this work. It is important to mention that, to the best of authors' knowledge, the use of PGO pedestal-type waveguide has not been studied before. PGO thin films codoped with Tm3+ and Yb3+ were obtained through RF magnetron sputtering technique. The pedestal profile was obtained using conventional optical lithography procedures, followed by plasma etching and sputtering deposition. The profile of Tm3+/Yb3+ codoped PGO waveguides was observed by means of Scanning Electron Microscopy (SEM) measurements. Also the infrared and infrared-to-visible frequency upconversion luminescences of Tm3+ ions were measured exciting the samples with a cw 980 nm diode laser. Propagation losses around 11 dB/cm and 9 dB/cm were obtained at 630 and 1050 nm, respectively, for waveguides in the 20-100 μm width range. Single-mode propagation was observed for waveguides width up to 12 μm and 7 μm, at 1050 nm and 630 nm, respectively; larger waveguides width provided multi-mode propagation. The present results corroborate the possibility of using Tm3+/Yb3+ codoped PGO thin films as active waveguide for photonic applications. © 2013 Elsevier B.V. All rights reserved.

Effect of Feed Strategy on Methane Production and Performance of an AnSBBR Treating Effluent from Biodiesel Production

The aim of this work was to investigate the effect of different feeding times (2, 4 and 6 h) and applied volumetric organic loads (4.5, 6.0 and 7.5 gCOD L-1 day(-1)) on the performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) treating effluent from biodiesel production. Polyurethane foam cubes were used as inert support in the reactor, and mixing was accomplished by recirculating the liquid phase. The effect of feeding time on reactor performance showed to be more pronounced at higher values of applied volumetric organic loads (AVOLs). Highest organic material removal efficiencies achieved at AVOL of 4.5 gCOD L-1 day(-1) were 87 % at 4-h feeding against 84 % at 2-h and 6-h feeding. At AVOL of 6.0 gCOD L-1 day(-1), highest organic material removal efficiencies achieved with 4-h and 6-h feeding were 84 %, against 71 % at 2-h feeding. At AVOL of 7.5 gCOD L-1 day(-1), organic material removal efficiency achieved with 4-h feeding was 77 %. Hence, longer feeding times favored minimization of total volatile acids concentration during the cycle as well as in the effluent, guaranteeing process stability and safety.

Organization studies as an applied science:the generation and use of academic knowledge about organizations : introduction to the special issue

The relationship between theory and practice has been discussed in the social sciences for generations. Academics from management and organization studies regularly lament the divide between theory and practice. They regret the insufficient academic knowledge of managerial problems and their solutions, and criticize the scholarly production of theories that are not relevant for organizational practice (Hambrick 1994). Despite the prevalence of this topic in academic discourse, we do not know much about what kind of academic knowledge would be useful to practice, how it would be produced and how the transfer of knowledge between theory and practice actually works. In short, we do not know how we can make academic work more relevant for practice or even whether this would be desirable. In this introduction to the Special Issue, we apply philosophical, theoretical and empirical perspectives to examine the challenges of studying the generation and use of academic knowledge. We then briefly describe the contribution of the seven papers that were selected for this Special Issue. Finally, we discuss issues that still need to be addressed, and make some proposals for future avenues of research.

The Social Life of Pots. The reconstruction of ceramic production and distribution patterns of pottery assemblages in the Northern Levant during the Iron Age

The aim of the project is the creation of a new model for the analysis of the political and social structures of the Northern Levant during the Iron Age, through the study of the production and circulation of ceramics in urban and rural centers. The project includes an innovative approach compared to a traditional contextual and analytical study of ceramic material. The geographical area under consideration represents an ideal context for understanding these dynamics, as a place of interaction between culturally different but constantly communicating areas (Eastern Mediterranean, Syria, Upper Mesopotamia). They corresponds to present-day southeastern Turkey and northern Syria, with the Mediterranean coast and the Euphrates River as limits to the west and east, respectively. The chronological interval taken into consideration by the study extends from the twelfth century BC. to the seventh century BC, corresponding to a phase of political fragmentation of the region into small-medium state entities and their subsequent conquest by the Neo-Assyrian empire starting from the end of the ninth century BC.

Trajetórias de vida : lembranças, caminhos e constituições dos saberes docentes de professores de Educação Física = Paths and trajectories of life : memories, paths and establishment of teaching knowledge of Physical Education Professors

Universidade Estadual de Campinas . Faculdade de Educação Física

A Simple and Fast Method for the Production and Characterization of Methylic and Ethylic Biodiesels from Tucum Oil via an Alkaline Route

A simple, fast, and complete route for the production of methylic and ethylic biodiesel from tucum oil is described. Aliquots of the oil obtained directly from pressed tucum (pulp and almonds) were treated with potassium methoxide or ethoxide at 40 degrees C for 40 min. The biodiesel form was removed from the reactor and washed with 0.1 M HCl aqueous solution. A simple distillation at 100 degrees C was carried out in order to remove water and alcohol species from the biodiesel. The oxidative stability index was obtained for the tucum oil as well as the methylic and ethylic biodiesel at 6.13, 2.90, and 2.80 h, for storage times higher than 8 days. Quality control of the original oil and of the methylic and ethylic biodiesels, such as the amount of glycerin produced during the transesterification process, was accomplished by the TLC, GC-MS, and FT-IR techniques. The results obtained in this study indicate a potential biofuel production by simple treatment of tucum, an important Amazonian fruit.

Production and characterization of boride layers on AISI D2 tool steel

AISI D2 is the most commonly used cold-work tool steel of its grade. It offers high hardenability, low distortion after quenching, high resistance to softening and good wear resistance. The use of appropriate hard coatings on this steel can further improve its wear resistance. Boronizing is a surface treatment of Boron diffusion into the substrate. In this work boride layers were formed on AISI D2 steel using borax baths containing iron-titanium and aluminium, at 800 degrees C and 1000 degrees C during 4 h. The borided treated steel was characterized by optical microscopy, Vickers microhardness, X-ray diffraction (XRD) and glow discharge optical spectroscopy (GDOS) to verify the effect of the bath compositions and treatment temperatures in the layer formation. Depending on the bath composition, Fe(2)B or FeB was the predominant phase in the boride layers. The layers exhibited ""saw-tooth"" morphology at the substrate interface; layer thicknesses varied from 60 to 120 mu m, and hardness in the range of 1596-1744 HV were obtained. (C) 2009 Elsevier Ltd. All rights reserved.