Involvement of NO in the inhibitory effect of Calotropis procera latex protein fractions on leukocyte rolling, adhesion and infiltration in rat peritonitis model

Aim of the study: The latex of Calotropis procera has been used in the traditional medicinal system for the treatment of leprosy, ulcers, tumors, piles and diseases of liver, spleen, abdomen and toothache. it comprises of a non-dialyzable protein fraction (LP) that exhibits anti-inflammatory properties and a dialyzable fraction (DF) exhibiting pro-inflammatory properties. The present study was carried out to evaluate the effect of LP sub-fractions on neutrophil functions and nociception in rodent models and to elucidate the mediatory role of nitric oxide (NO). Material and methods: The LP was subjected to ion exchange chromatography and the effect of its three sub-fractions (LP(PI), LP(PII), and LP(PIII)) thus obtained was evaluated on leukocyte functions in the rat peritonitis model and on nociception in the mouse model. Results: LP sub-fractions exhibit distinct protein profile and produce a significant decrease in the carrageenan and DF induced neutrophil influx and exhibit anti-nociceptive property. The LP and its sub-fractions produced a marked reduction in the number of rolling and adherent leukocytes in the mesenteric microvasculature as revealed by intravital microscopy. The anti-inflammatory effect of LP(PI), the most potent anti-inflammatory fraction of LP, was accompanied by an increase in the serum levels of NO. Further, our study shows that NO is also involved in the inhibitory effect of LP(PI) on neutrophil influx. Conclusions: Our study shows that LP fraction of Calotropis procera comprises of three distinct sets of proteins exhibiting anti-inflammatory and anti-nociceptive properties of which LP(PI) was most potent in inhibiting neutrophil functions and its effects are mediated through NO production. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

DISTINGUISHING Campa guianensis Aubl. FROM Campa procera D.C. (MELIACEAE) BY MORPHOLOGY OF YOUNG SEEDLINGS

Seedling morphology was studied in Campa guianensisAubl. and Carapa proceraD. C. from germination to 90 days age. In both species germination is hypogeal and cryptocotylar. Both have rare albino seedlings. Though both species have compound leaves when adult, C, proceraputs out an average total of six simple leaves at germination, while leaves of C. guianensisare compound at all stages. This is the best diagnostic character for separation of the two species at the young seedling stage. Not diagnostic, but none the less useful, is the fact, that polyembryonic seeds are often found in C. procera,but not observed in C guianensis.

Sementes e plântulas de andiroba (Carapa guianensis Aubl. e Carapa procera D. C.): aspectos botânicos, ecológicos e tecnológicos

Na Amazônia, encontram-se ambas espécies do gênero Carapa (Meliaceae), conhecidas pela qualidade da madeira e pelo óleo extraído das sementes. O objetivo deste trabalho foi apresentar informações sobre sementes e plântulas de uma maneira abrangente para subsidiar interesses científicos e aplicados à propagação e manejo das espécies. Para tanto são apresentadas a bio-morfologia dos frutos, sementes e plântulas e uma descrição botânica comparativa, permitindo a distinção das duas espécies. A distribuição natural, abundância e fenologia são apresentados; como também fatores que afetam a regeneração natural, relacionados com as altas taxas de predação de sementes e o ataque da broca-do-ponteiro (Hypsipyla grandella). Andiroba produz sementes grandes e regularmente (em média com peso de 25 g - C. guianensis el6 g -C. procera), porém a produção de mudas enfrenta dificuldades devido a intolerância das sementes ao dessecamento e resfriamento. A espessura do tegumento das sementes de C. guianensis pode causar dormência e prolongar a germinação em até seis meses. O tegumento das sementes de C. procera é normalmente mais delgado e elas necessitam em média apenas um mês para germinar. Práticas de viveiro e plantio, assim como o uso destas espécies são abordados.

Latex constituents from Calotropis procera (R. Br.) display toxicity upon egg hatching and larvae of Aedes aegypti (Linn.)

Calotropis procera R. Br. (Asclepiadaceae) is a well-known medicinal plant with leaves, roots, and bark being exploited by popular medicine to fight many human and animal diseases. This work deals with the fractionation of the crude latex produced by the green parts of the plant and aims to evaluate its toxic effects upon egg hatching and larval development of Aedes aegypti. The whole latex was shown to cause 100% mortality of 3rd instars within 5 min. It was fractionated into water-soluble dialyzable (DF) and non-dialyzable (NDF) rubber-free materials. Both fractions were partially effective to prevent egg hatching and most of individuals growing under experimental conditions died before reaching 2nd instars or stayed in 1st instars. Besides, the fractions were very toxic to 3rd instars causing 100% mortality within 24 h. When both fractions were submitted to heat-treatment the toxic effects were diminished considerably suggesting low thermostability of the toxic compounds. Polyacrylamide gel electrophoresis of both fractions and their newly fractionated peaks obtained through ion exchange chromatography or desalting attested the presence of proteins in both materials. When submitted to protease digestion prior to larvicidal assays NDF lost most of its toxicity but DF was still strongly active. It may be possible that the highly toxic effects of the whole latex from C. procera upon egg hatching and larvae development should be at least in part due to its protein content found in NDF. However the toxicity seems also to involve non protein molecules present in DF.

Predação de sementes de andiroba [Carapa guianensis Aubl. e Carapa procera DC. (Meliaceae)] por insetos na Amazônias

Os objetivos deste trabalho foram identificar os insetos associados à predação de sementes de Carapa guianensis e Carapa procera e avaliar o potencial de dano nas sementes por insetos e a ocorrência de estratificação vertical na predação de sementes de andiroba. O estudo foi realiado em plantios de C. guianensis e C. procera na Reserva Florestal Ducke, Manaus, Estado do Amazonas, Brasil. As coletas foram realizadas semanalmente no chão da floresta e mensalmente em três diferentes alturas (terços) da copa das árvores. Para avaliar o efeito da predação na germinação, 30 sementes não predadas e 30 sementes predadas coletadas mensalmente do chão da floresta foram colocadas para germinar por um período de um mês. Os resultados indicaram que Hypsipyla grandella e H. ferrealis (Lepidoptera, Pyralidae) foram as principais espécies de insetos associadas à predação das sementes de C. procera e C. guianensis, resultando em taxas de predação média de 39% a 61,96%, respectivamente. Observou-se estratificação vertical na predação dos frutos e sementes na copa das árvores de ambas as espécies de Carapa. A predação das sementes de C. procera e C. guianensis por Hypsipyla spp. reduziu o processo de germinação. Este estudo produziu informações sobre a associação entre C. procera e C. guianensis e as espécies de Hypsipyla.

CARDINAL TEMPERATURES FOR GERMINATION OF THE MEDICINAL ANDDESERT PLANT, Calotropis procera

ABSTRACT Calotropis procera, Apocynaceae, is a wild perennial shrub that originated in the Persian deserts. It is known to provide key resources in degraded ecosystems to about 80 animal species. C. procera is regenerated by seed and produces lots of small seeds that are dispersed by wind; nonetheless, its density is very low. The purpose of this study is to estimate the cardinal temperatures including the base, optimum, and maximum temperatures of Calotropis procera looking at two different ecotypes in the Iranian desert. The germination behavior of C. procera seeds was tested at temperature regimens of 0, 5, 10, 15, 20, 25, 30, 35 and 40oC and was analyzed using linear regression models. The rate of germination increased between base and optimum thermal conditions, and decreased between optimum and maximum thermal conditions. The base, optimum and maximum temperatures for germination of C. procera seeds were estimated at 19.10, 30.75 and 47.80 oC for the Fars and 20.00, 31.82 and 49.69oC for the Zahedan desert, respectively. Temperature and germination were rated to determine the seeding dates of the C. procera. Overall, cardinal temperatures for germination were dependent on local climate characteristics for the range of adaptations in plant growth of the given species.

Osmotin from Calotropis procera latex: New insights into structure and antifungal properties

This study aimed at investigating the structural properties and mechanisms of the antifungal action of CpOsm, a purified osmotin from Calotropis procera latex. Fluorescence and CD assays revealed that the CpOsm structure is highly stable, regardless of pH levels. Accordingly, CpOsm inhibited the spore germination of Fusarium solani in all pH ranges tested. The content of the secondary structure of CpOsm was estimated as follows: alpha-helix (20%), beta-sheet (33%), turned (19%) and unordered (28%). RMSD 1%. CpOsm was stable at up to 75 degrees C, and thermal denaturation (T(m)) was calculated to be 77.8 degrees C. This osmotin interacted with the negatively charged large unilamellar vesicles (LUVs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-1-glycerol (POPG), inducing vesicle permeabilization by the leakage of calcein. CpOsm induced the membrane permeabilization of spores and hyphae from Fusarium solani, allowing for propidium iodide uptake. These results show that CpOsm is a stable protein, and its antifungal activity involves membrane permeabilization, as property reported earlier for other osmotins and thaumatin-like proteins. (C) 2011 Elsevier B.V. All rights reserved.

Influência do ácido peracético sobre a resistência flexural e rugosidade das cerâmicas do sistema Procera AllCeram

O objetivo deste trabalho foi avaliar a influência da imersão em ácido peracético sobre a resistência flexural e rugosidade das cerâmicas do sistema Procera AllCeram. Para cada ensaio foram analisados, o grupo controle e experimental cuja variável foi a imersão em ácido peracético (0,2%), por 50 minutos. A resistência flexural biaxial foi avaliada de acordo com a especificação 6872, da International Organization for Standardization (ISO), que requer um valor mínimo de 50MPa para a cerâmica de cobertura (AllCeram) e 100MPa para a cerâmica de subestrutura (Procera). Para todos os ensaios foram confeccionados 10 corpos de prova, de cada material para compor os grupos experimental (imerso em desinfetante) e controle, com dimensões de (16±0,2)mm de diâmetro por (1,6±0,1)mm de espessura para o AllCeram e, (12±0,2)mm de diâmetro e (1,2±0,2)mm de espessura para o Procera, totalizando 60 corpos de prova. A rugosidade foi avaliada com um rugosímetro utilizando o parâmetro Ra. Os valores médios de resistência flexural biaxial e o desvio padrão dos grupos controle e experimental do Procera e AllCeram foram respectivamente, (440,7±114,77)MPa, (411,6±45,02)MPa, (76,5±3,59)MPa e (86,5±15,41)MPa. Os valores médios da rugosidade e o desvio padrão dos grupos controle e experimental do Procera e AllCeram foram respectivamente: (0,090±0,014)µm, (0,086±0,009) µm, (0,022±0,004)µm e (0,0210±0,006) µm. Quando comparados com a ISO 6872, todos os corpos de prova foram aprovados quanto à resistência flexural. Quando comparados entre si, através do teste “t” de Student não houve diferença significativa entre os grupos experimental e controle de cada um dos ensaios, mostrando que o ácido peracético não interferiu significativamente nas propriedades de resistência flexural e rugosidade dos materiais. Sendo assim, pode-se prever que tal procedimento não trará prejuízos ao desempenho clínico das próteses confeccionadas com as cerâmicas do sistema Procera AllCeram quando consideradas as propriedades analisadas, podendo ser um procedimento clinicamente recomendável. Unitermos: cerâmica odontológica, resistência flexural, rugosidade, ácido peracético.

The Tomato (Solanum Lycopersicum cv. Micro-Tom) Natural Genetic Variation Rg1 and the DELLA Mutant Procera Control the Competence Necessary to Form Adventitious Roots and Shoots

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of procera/porcelain interface in metal-free prosthesis

Prosthetic substructures for dental application are veneered by porcelain comprising a structure with different elastic modulus and thermal expansion coefficients layers. This structure may present residual stresses in different layers leading to crack propagation and delamination. Although veneering porcelain remains basically on same strength than standard feldspathic porcelains, new ceramic cores have been developed with higher mechanical properties overcoming metal substructures, improving esthetics and biocompatibility. The interface between the Procera dense sintered alumina core and the manufacturer recommended veneering porcelain (AllCeram-Degussa) were evaluated using SEM in coping shaped specimen simulating the standard dental preparation. There were neither crack presences at the interface nor porcelain delamination.

Flavonóides de Calotropis procera R. Br. (Asclepiadaceae)

In this work we report the identification of two flavonol glycosides isolated from the leaves of Calotropis procera R. Br. (Asclepiadaceae), a plant species with large occurrence in Northwest of Brazil with some applications in folk medicine. Some proved pharmacological activities in this species could be attributed to the presence of flavonol glycosides. The extraction and isolation of flavonol glycosides was carried out firstly by a liquid-liquid partition, and then by elution of n-BuOH fraction with MeOH over a Sephadex LH-20 column. The identification of flavonol glycosides isorhamnetin-3-O-rutinoside (1), and isorhamnetin-3-O-robinobioside (2), was obtained by 1H and 13C NMR, one- and two-dimensional techniques.

Characterization of the procera Tomato Mutant Shows Novel Functions of the SlDELLA Protein in the Control of Flower Morphology, Cell Division and Expansion, and the Auxin-Signaling Pathway during Fruit-Set and Development

procera (pro) is a tall tomato (Solanum lycopersicum) mutant carrying a point mutation in the GRAS region of the gene encoding SlDELLA, a repressor in the gibberellin (GA) signaling pathway. Consistent with the SlDELLA loss of function, pro plants display a GA-constitutive response phenotype, mimicking wild-type plants treated with GA(3). The ovaries from both nonemasculated and emasculated pro flowers had very strong parthenocarpic capacity, associated with enhanced growth of preanthesis ovaries due to more and larger cells. pro parthenocarpy is facultative because seeded fruits were obtained by manual pollination. Most pro pistils had exserted stigmas, thus preventing self-pollination, similar to wild-type pistils treated with GA(3) or auxins. However, Style2.1, a gene responsible for long styles in noncultivated tomato, may not control the enhanced style elongation of pro pistils, because its expression was not higher in pro styles and did not increase upon GA(3) application. Interestingly, a high percentage of pro flowers had meristic alterations, with one additional petal, sepal, stamen, and carpel at each of the four whorls, respectively, thus unveiling a role of SlDELLA in flower organ development. Microarray analysis showed significant changes in the transcriptome of preanthesis pro ovaries compared with the wild type, indicating that the molecular mechanism underlying the parthenocarpic capacity of pro is complex and that it is mainly associated with changes in the expression of genes involved in GA and auxin pathways. Interestingly, it was found that GA activity modulates the expression of cell division and expansion genes and an auxin signaling gene (tomato AUXIN RESPONSE FACTOR7) during fruit-set.

The Tomato (Solanum Lycopersicum cv. Micro-Tom) Natural Genetic Variation Rg1 and the DELLA Mutant Procera Control the Competence Necessary to Form Adventitious Roots and Shoots

Despite the wide use of plant regeneration for biotechnological purposes, the signals that allow cells to become competent to assume different fates remain largely unknown. Here, it is demonstrated that the Regeneration1 (Rg1) allele, a natural genetic variation from the tomato wild relative Solanum peruvianum, increases the capacity to form both roots and shoots in vitro; and that the gibberellin constitutive mutant procera (pro) presented the opposite phenotype, reducing organogenesis on either root-inducing medium (RIM) or shoot-inducing medium (SIM). Mutants showing alterations in the formation of specific organs in vitro were the auxin low-sensitivity diageotropica (dgt), the lateral suppresser (ls), and the KNOX-overexpressing Mouse ears (Me). dgt failed to form roots on RIM, Me increased shoot formation on SIM, and the high capacity for in vitro shoot formation of ls contrasted with its recalcitrance to form axillary meristems. Interestingly, Rg1 rescued the in vitro organ formation capacity in proRg1 and dgtRg1 double mutants and the ex vitro low lateral shoot formation in pro and ls. Such epistatic interactions were also confirmed in gene expression and histological analyses conducted in the single and double mutants. Although Me phenocopied the high shoot formation of Rg1 on SIM, it failed to increase rooting on RIM and to rescue the non-branching phenotype of ls. Taken together, these results suggest REGENERATION1 and the DELLA mutant PROCERA as controlling a common competence to assume distinct cell fates, rather than the specific induction of adventitious roots or shoots, which is controlled by DIAGEOTROPICA and MOUSE EARS, respectively.

[Rehabilitation of an abraded occlusion with Procera-ZrO2 all-ceramic crowns. A case report]

The rehabilitation of a patient with advanced tooth wear by means of Procera ZrO2 ceramic crowns is described. A healthy, 60 year old patient complained about front teeth esthetics and impaired function due to reduced tooth height. He was aware of bruxism and wished full mouth rehabilitation. The clinical examination showed that tooth wear was generalized, but most teeth could be maintained in both jaws. A staged procedure was planned, starting with a splint therapy and a provisional fixed prosthesis to reestablish correct vertical dimension of occlusion (VDO) and stable occlusal contacts. The new ZrO2 material with the Procera technique was chosen to restore all teeth in both jaws, except the mandible front teeth. In the second treatment phase, crown lengthening of the maxillary front teeth was performed and one implant placed to replace a maxillary premolar. After final tooth preparation, impression taking and bite registration the ZrO2 crown-copings were scanned, processed and completed by veneering. A flat occlusal scheme with stable front teeth guidance was established. The advantage of the presented treatment is the esthetic result in combination with a material of high mechanical and biological quality.