Clinical research on new drugs (Phase I). Profile of scientific publications: data from the pre-clinical phase and bioethical aspects

OBJETIVO: Traçar o perfil das publicações científicas de fase I e procurar saber se a publicação oferece dados da fase pré-clínica com ênfase nos aspectos bioéticos. MÉTODOS: Foram analisados 61 artigos científicos publicados no ano de 2007, que relatam pesquisas envolvendo seres humanos com novos fármacos, medicamentos ou vacinas em fase I. Foi elaborado um roteiro para coleta de dados, com o qual fosse possível analisar e avaliar os artigos científicos. O roteiro contempla itens referentes à fase pré-clínica (associados à fase clínica) e itens referentes às características da amostra. RESULTADOS: Nos artigos analisados, a maioria das pesquisas foi realizada nos EUA. Devido ao grande número de publicações destinadas às doenças oncológicas a maioria delas foi realizada com voluntários doentes. Quanto às informações sobre a fase pré-clínica presente nas publicações de fase I observamos que são pobres ou inexistentes. Mesmo que os autores julguem a pesquisa fase I como promissora e sugiram estudos futuros de fase II, ao leitor não é possível este mesmo julgamento pela escassez de informações da fase pré-clínica. CONCLUSÃO: O perfil das publicações levanta dados que merecem reflexão e análise para melhor avaliação do que está ocorrendo com as publicações de fase I.

The association between restorative pre-clinical activities and musculoskeletal disorders

Objective: To evaluate the risk of development of musculoskeletal disorders in the upper limbs of undergraduate dentistry students during the execution of pre-clinical laboratory activities based on gender, type of dental procedure and area of the mouth under treatment.Methods: Male and female undergraduate students in the second year of the Araraquara Dental School, UNESP, were enrolled in this study. Digital photographs were obtained whilst the subjects performed laboratory activities. The working postures adopted by each student were evaluated using the Rapid Upper Limb Assessment (RULA). The photos were analysed by a calibrated researcher (k = 0.89), and a final risk score was attributed to each analysed procedure (n = 354). Descriptive statistical analyses were performed, and the associations of interest were analysed by the chisquare test (P = 0.05).Results: During most of the laboratory procedures performed, the risk of developing musculoskeletal disorders was high (64.7%; - IC95%: 59.7-69.7%), with no significant association between the RULA final score and gender (chi(2) = 1.100; P = 0.577), type of dental procedure (chi(2) = 5.447, P = 0.244) and mouth area treated (chi(2) = 4.150; P = 0.126).Conclusions: The risk of developing musculoskeletal disorders was high in undergraduate dentistry students; this risk was not related to gender, type of dental procedure and region of the mouth being treated.

Aferição das dificuldades/competências na área da Endodontia percepcionadas pelos alunos do 4º e 5º anos da FCS-UFP

Introdução: Com uma consciencialização cada vez maior das populações para a preservação dos dentes naturais, a Endodontia tem assumido uma importância crescente, tendo por objectivo principal a manutenção de dentes funcionais, sem prejudicar a saúde dos pacientes. Estes devem beneficiar de um tratamento segundo o “standard of care”, proporcionado por profissionais competentes. Vários estudos demonstram que a Endodontia é considerada uma área difícil e stressante para os estudantes, exibindo um sentimento de menor confiança na prática clínica, sobretudo no que diz respeito a procedimentos mais complexos, nomeadamente, no tratamento de dentes posteriores. Em 2010, na tentativa de homogeneizar as competências adquiridas pelos Médicos Dentistas (MD), a Associação para a Educação Dentária Europeia (AEDE) definiu critérios para a sua formação pré-graduada, indicando que o MD recém-graduado deve ter adquirido competências e capacidades técnicas que lhe permita começar a sua prática clínica de forma independente. Objectivos: Analisar os conhecimentos adquiridos e as dificuldades sentidas na área da Endodontia pelos alunos do 4º e 5º anos do Mestrado Integrado em Medicina Dentária da Faculdade de Ciências de Saúde (FCS) da Universidade Fernando Pessoa (UFP), fazendo, igualmente, uma abordagem ao ensino ministrado na área da Endodontia face aos resultados obtidos. Materiais e Métodos: Este trabalho está dividido em duas partes: revisão bibliográfica e investigação científica. A revisão bibliográfica do tema engloba o ensino graduado em Medicina Dentária, o uso de isolamento absoluto (IA) na prática clínica de Endodontia, a instrumentação manual versus rotatória, a influência no sucesso do tratamento endodôntico (TE) da sua execução por estudantes do 4º e 5º ano, as Guidelines para o TE e o ensino de Endodontia na UFP. A pesquisa bibliográfica foi efectuada através da base de dados PubMed, tendo sido utilizadas, em diferentes combinações, as seguintes palavras-chave: ”Endodontics”, “teaching”; “pre-clinical”; “undergraduate”; “Clinical”; “treatment” e “Europe”. O trabalho de investigação consistiu na elaboração, aprovação pela Comissão de Ética da UFP e posterior aplicação de um questionário destinado aos alunos do 4º e 5º ano do Mestrado Integrado em Medicina Dentária da FCS-UFP. A população estimada de alunos do 4º ano foi de 190 alunos e a de 5º ano de 150 alunos, o que perfaz um total de 340 alunos. Dos inquéritos respondidos, apenas foram considerados 338, uma vez que dois foram anulados pois continham respostas inválidas. Resultados: A “condição socioeconómica do paciente” foi considerada a causa menos relevante para avaliar um caso endodôntico, tendo sido apontada por 34,3% dos alunos. Assinala-se que 92% dos alunos de 4º ano e 93,3% dos alunos de 5º ano consideram que os molares superiores são os dentes mais difíceis de tratar, sendo a visibilidade uma das principais razões para esta opinião. O grau de dificuldade para a colocação do IA é definido como “Elevado” para a maioria dos alunos de 4º ano. A maior parte dos alunos de 5º ano considera que o grau de dificuldade para a “Determinação do tipo de reconstrução/prótese fixa mais indicada” é “Elevado”. O passo do TE onde os alunos do 4º ano se sentem mais confiantes é no “Diagnóstico de cárie”, sendo que os alunos do 5º ano se sentem mais confiantes ao realizar o “TE em dentes com 1 ou 2 canais”. O “Conteúdo leccionado nas aulas teóricas” foi considerado o principal aspecto positivo do ensino endodôntico. Por outro lado, o “Número de actos clínicos realizados” foi considerado o principal aspecto negativo, tanto para alunos de 4º como de 5º ano. Em ambos os anos, os principais pontos que os alunos acham que devem ser melhorados são o “Número de pacientes nas aulas clínicas” e a “Aprendizagem da técnica de instrumentação mecanizada/obturação termoplástica”. As principais preocupações referidas, tanto por alunos de 4º como de 5º anos, foram a “Insegurança na prática clínica” e a “Dificuldade em encontrar ofertas profissionais”. Relativamente à qualidade dos seus TE existe um número significativo de alunos do 5º ano que já se auto-avaliam como “Bons” (33,6%), por comparação com os do 4º ano (21,2%), sendo a auto-avaliação de “Razoável” dominante em ambos os anos de formação. Conclusões: Conclui-se que na disciplina de Endodontia na FCS-UFP, são seguidas as Guidelines da European Society of Endodontology (ESE), sendo que estas indicam o protocolo mais correcto a seguir durante o Tratamento Endodôntico Não-Cirúrgico (TENC). Contudo, o reduzido número de actos clínicos e a consequente falta de prática faz com que os alunos se sintam pouco confiantes ao iniciar a sua actividade profissional.

Gas and particle dynamics of a contoured shock tube for pre-clinical microparticle drug delivery

We investigate the gas-particle dynamics of a device designed for biological pre-clinical experiments. The device uses transonic/supersonic gas flow to accelerate microparticles such that they penetrate the outer skin layers. By using a shock tube coupled to a correctly expanded nozzle, a quasi-one-dimensional, quasi-steady flow (QSF) is produced to uniformly accelerate the microparticles. The system utilises a microparticle cassette (a diaphragm sealed container) that incorporates a jet mixing mechanism to stir the particles prior to diaphragm rupture. Pressure measurements reveal that a QSF exit period - suitable for uniformly accelerating microparticles - exists between 155 and 220 mus after diaphragm rupture. Immediately preceding the QSF period, a starting process secondary shock was shown to form with its (x,t) trajectory comparing well to theoretical estimates. To characterise the microparticle, flow particle image velocimetry experiments were conducted at the nozzle exit, using particle payloads with varying diameter (2.7-48 mu m), density (600-16,800 kg/m(3)) and mass (0.25-10 mg). The resultant microparticle velocities were temporally uniform. The experiments also show that the starting process does not significantly influence the microparticle nozzle exit velocities. The velocity distribution across the nozzle exit was also uniform for the majority of microparticle types tested. For payload masses typically used in pre-clinical drug and vaccine applications (

Bioprocess engineering of induced pluripotent stem cells for application in cell therapy and pre-clinical research

Dissertation to obtain Master Degree in Biotechnology

Novel Cryopreservation Strategies for Cell‐Therapies and Pre‐Clinical Research

The expanding need for complex biologics for therapeutic applications, in‐vitro pharmacology and toxicology studies and fundamental research demands the production of banks of well‐characterized and safety‐tested stocks of a large number of cell/tissue samples. This implies the development of effective cryopreservation methodologies that can cope with process scalability and automation and must reflect the biological and physical properties of the cells as these can be significantly altered by the process.

Pre-clinical trials for Machado-Joseph Disease: Hypothesis-based and hypothesis-free therapeutic approaches

Tese de Doutoramento em Ciências da Saúde

Cross-cultural clinical competence and post-graduate teaching: any impact(s) on doctors?

Context: Cross-cultural clinical competence (CCC) requires a mixtureof "knowledge" (K), "attitude" (A) and "skills" (S), in order to develop theability to give quality care to patients of different cultures. Theseattributes allow, while providing medical care, consideration of thepatient's medical, social, cultural and language needs. The LausanneUniversity Medical Policlinic (PMU) provides approximately 30000consultations per year to migrant patients and over the past five yearshas implemented a training course on CCC that focuses on trialogue,stereotypes and administrative procedures for the healthcare ofmigrants.Method: A quantitative survey of 18 new residents, was carried outusing a validated questionnaire, the "Multicultural AssessmentQuestionnaire" (the MAQ, 16 questions on K, A and S) to evaluate theimpact of CCC training. The questionnaire was distributed before theCCC course (J-1), three days after (J+3) and three months later (J+90).A descriptive univariate analysis of the difference in MAQ scoresbetween the times J-1 - J+3 and J-1 - J+90 was made. Three FocusGroups were conducted, at three months, to explore residents' thoughtsabout the course.Results: A significant increase was observed in global performancedeclared by residents. Following the intervention, the score of the MAQincreased from 31.4 points to 38.0 points at three days (p = 0.004) andto 37.7 points at three months (p = 0.003). This increase was mostnoticeable in the field of acquiring K: total score J-1: 118, J+3: 189,J+90: 190 (difference J-1 - J+3 and J-1 - J+90: p <0.005). There was nosignificant difference in acquiring A (J-1: 222, J+3: 228, J+90: 229), andS increases in a significant way at first (J-1: 222, J+3: 265, J-1 - J+3:p = 0.035), then comes back to the start value (J+90: 217). The residentswere interested by the course which they felt provides useful informationfor clinical practice. They had a great number of expectations in varyingfields (medical anthropology, cultural differences, epidemiology, etc.),hoping a "ready-made" solution for the approach of migrant patients.Conclusions: A unique training of CCC at the post-graduate level,upgraded K, and to a lesser extent A and S, for these 18 residents. Theywere interest and they had many expectations. Subsequent coursesshould consolidate these acquisitions. Future study should demonstratethe impact on patients' clinical outcome.

Imaging of Dopamine and Serotonin Transporters. Pre-clinical Studies with Radiotracers for Positron Emission Tomography

The action of the neurotransmitters dopamine (DA) and serotonin (5-HT) at synapses is terminated by their rapid reuptake into presynaptic nerve endings via plasma membrane dopamine (DAT) and serotonin (SERT) transporters. Alterations in the function of these transporters have been suggested as a feature of several neurological and neuropsychiatric diseases, such as Parkinson’s disease (PD), depression, and anxiety. A suitable clinical method for studying these transporters non-invasively in vivo is positron emission tomography (PET) utilizing radiopharmaceuticals (tracers) labelled with short-lived positron-emitting radionuclides. The aim of this study was to evaluate in rats two novel radiotracers, [¹⁸F]beta -CFT-FP and ¹⁸FFMe-McN, for imaging DAT and SERT, respectively, using in vitro, ex vivo and in vivo methods. Substituting an N-methyl in [¹⁸F]beta-CFT, a well known DAT tracer, with a ¹⁸Ffluoropropyl group significantly changed the properties of the tracer. [¹⁸F]beta- CFT showed slow kinetics and metabolism, and a high specific uptake in the striatum, whereas [¹⁸F]beta-CFT-FP showed fast kinetics and metabolism, and a moderate specific uptake in the striatum. [¹⁸F]betaCFT-FP was selective for DAT; but [¹⁸F]beta-CFT also bound to the noradrenaline transporter. [¹⁸F]beta-CFT-FP may be a suitable PET tracer for imaging the striatal DAT sites, but a tracer with a higher affinity is needed for imaging extrastriatal DAT sites. In rats, ¹⁸FFMe-McN showed high target-to-non-target ratios, specificity and selectivity for SERT, but slow kinetics. However, ¹⁸FFMe-McN reveals potential for imaging SERT, at least in pre-clinical studies. In addition, the sensitivities of [¹⁸F]beta CFT and [¹⁸ F]FDOPA (a precursor of DA) for detecting mild nigrostriatal hypofunction were compared in an animal model of PD. The uptake of [¹⁸F]FDOPA was significantly affected by compensatory effects in dopaminergic cells, whereas [¹⁸F]beta-CFT was more sensitive and therefore more suitable for PET studies of mild dopaminergic symptoms. In conclusion, both novel tracers, [¹⁸F]-CFT-FP and ¹⁸FFMe-McN, have potential, but are not optimal PET tracers for DAT and SERT imaging in rats, respectively. [¹⁸F]beta-CFT is superior to [18F]FDOPA for imaging mild nigral lesions in rat brains.

Bioactive Glass in Lumbar Spondylodesis. A Pre-Clinical and Clinical Study

Bioactive glasses (BGs) form a group of synthetic, surface-active, composition-dependent, silica-based biomaterials with osteoconductive, osteopromotive, and even angiogenic, as well as antibacterial, properties. A national interdisciplinary research group, within the Combio Technology Program (2003–2007), developed a porous load-bearing composite for surgical applications made of BG 1–98 and polymer fibers. The pre-clinical part of this thesis focused on the in vitro and in vivo testing of the composite materials in a rabbit femur and spinal posterolateral fusion model. The femur model failed to demonstrate the previously seen positive effect of BG 1–98 on osteogenesis, probably due to the changed resorption properties of BG in the form of fibers. The spine study was terminated early due to adverse events. In vitro cultures showed the growth inhibition of human mesenchymal stems next to BG 1–98 fibers and radical pH changes. A prospective, long-term, follow-up study was conducted on BG–S53P4 and autogenous bone used as bone graft substitutes for instrumented posterolateral spondylodesis in the treatment of degenerative spondylolisthesis (n=17) and unstable burst fractures (n=10) during 1996–1998. The operative outcome was evaluated from X-rays and CT scans, and a clinical examination was also performed. On the BG side, a solid fusion was observed in the CT scans of 12 patients, and a partial fusion was found in 5 patients, the result being a total fusion rate in all fusion sites (n=41) 88% for levels L4/5 and L5/S1 in the spondylolisthesis group. In the spine fracture group, solid fusion was observed in five patients, and partial fusion was found in five resulting in a total fusion rate of 71% of all fusion sites (n=21). The pre-clinical results suggest that under certain conditions the physical form of BG can be more critical than its chemical composition when a clinical application is designed. The first long-term clinical results concerning the use of BG S53P4 as bone graft material in instrumented posterolateral spondylodesis seems to be a safe procedure, associated with a very low complication rate. BG S53P4 used as a stand-alone bone substitute cannot be regarded as being as efficient as AB in promoting solid fusion.

Intracranial Nimodipine Implant: Feasibility and Implications for the Treatment of Subarachnoid Hemorrhage – A Pre-Clinical Study

Intracranial aneurysmal subarachnoid hemorrhage (aSAH) is a life-threatening condition requiring immediate neurocritical care. A ruptured aneurysm must be isolated from arterial circulation to prevent rebleeding. Open surgical clipping of the neck of the aneurysm or intra-arterial filling of the aneurysm sack with platinum coils are major treatment strategies in an acute phase. About 40% of the patients suffering from aSAH die within a year of the bleeding despite the intensive treatment. After aSAH, the patient may develop a serious complication called vasospasm. Major risk for the vasospasm takes place at days 5–14 after the primary bleeding. In vasospasm, cerebral arteries contract uncontrollably causing brain ischemia that may lead to death. Nimodipine (NDP) is used to treat of vasospasm and it is administrated intravenously or orally every four hours for 21 days. NDP treatment has been scientifically proven to improve patients’ clinical outcome. The therapeutic effect of L-type calcium channel blocker NDP is due to the ability to dilate cerebral arteries. In addition to vasodilatation, recent research has shown the pleiotropic effect of NDP such as inhibition of neuronal apoptosis and inhibition of microthrombi formation. Indeed, NDP inhibits cortical spreading ischemia. Knowledge of the pathophysiology of the vasospasm has evolved in recent years to a complex entity of early brain injury, secondary injuries and cortical spreading ischemia, instead of being pure intracranial vessel spasm. High NDP levels are beneficial since they protect neurons and inhibit the cortical spreading ischemia. One of the drawbacks of the intravenous or oral administration of NPD is systemic hypotension, which is harmful particularly when the brain is injured. Maximizing the beneficial effects and avoiding systemic hypotension of NDP, we developed a sustained release biodegradable NDP implant that was surgically positioned in the basal cistern of animal models (dog and pig). Higher concentrations were achieved locally and lower concentrations systemically. Using this treatment approach in humans, it may be possible to reduce incidence of harmful hypotension and potentiate beneficial effects of NDP on neurons. Intracellular calcium regulation has a pivotal role in brain plasticity. NDP blocks L-type calcium channels in neurons, substantially decreasing intracellular calcium levels. Thus, we were interested in how NDP affects brain plasticity and tested the hypothesis in a mouse model. We found that NDP activates Brain-derived neurotrophic factor (BDNF) receptor TrkB and its downstream signaling in a reminiscent of antidepressant drugs. In contrast to antidepressant drugs, NDP activates Akt, a major survival-promoting factor. Our group’s previous findings demonstrate that long-term antidepressant treatment reactivates developmental-type of plasticity mechanisms in the adult brain, which allows the remodeling of neuronal networks if combined with appropriate rehabilitation. It seems that NDP has antidepressant-like properties and it is able to induce neuronal plasticity. In general, drug induced neuronal plasticity has a huge potential in neurorehabilitation and more studies are warranted.

The use of polylactic and polyglycolic copolymer biomaterial in a pre-clinical model of compromised primary stability

Aim Primary implant stability can be compromised by overdrilling of the implant bed. Filling the gap between the implant and the bone with a highly viscous copolymer of polylactic and polyglycolic acid (PLA/PGA) might stabilize the implant and thus supply osseointegration. The aim of this study was to evaluate implants installed in overdrilled beds associated with PLA/PGA in rats tibia model by means of removal torque test and fluorochrome analysis. Materials and methods For this experiment two groups were selected: in the test group 0.4 mm overdrilled defects (2.0 in diameter and 3 mm long ) were produced in the right tibia of seven rats and implants were placed covered with PLA/PGA biomaterial to fill the gap; the control group was not overdrilled and the implants were placed without the biomaterial. Implants of 1.6 mm in diameter and 3 mm long where placed into all defects. Calcein, alizarin and oxytetracyclin were injected at 7, 15 and 21 postoperative days, respectively, and the animals were sacrificed at 35 postoperative day. Results The results showed that all the implants achieved osseointegration. There were no statistical significance differences in torque-reverse and fluorocrome analysis (P>0.05). Conclusion We can conclude that overdrilled defects filled with PLA/PGA did not disturb osseointegration in this experimental model. © ARIESDUE.

Development of musculoskeletal models for the design and the pre-clinical validation of hip resurfacing prosthesis

Background. The surgical treatment of dysfunctional hips is a severe condition for the patient and a costly therapy for the public health. Hip resurfacing techniques seem to hold the promise of various advantages over traditional THR, with particular attention to young and active patients. Although the lesson provided in the past by many branches of engineering is that success in designing competitive products can be achieved only by predicting the possible scenario of failure, to date the understanding of the implant quality is poorly pre-clinically addressed. Thus revision is the only delayed and reliable end point for assessment. The aim of the present work was to model the musculoskeletal system so as to develop a protocol for predicting failure of hip resurfacing prosthesis. Methods. Preliminary studies validated the technique for the generation of subject specific finite element (FE) models of long bones from Computed Thomography data. The proposed protocol consisted in the numerical analysis of the prosthesis biomechanics by deterministic and statistic studies so as to assess the risk of biomechanical failure on the different operative conditions the implant might face in a population of interest during various activities of daily living. Physiological conditions were defined including the variability of the anatomy, bone densitometry, surgery uncertainties and published boundary conditions at the hip. The protocol was tested by analysing a successful design on the market and a new prototype of a resurfacing prosthesis. Results. The intrinsic accuracy of models on bone stress predictions (RMSE < 10%) was aligned to the current state of the art in this field. The accuracy of prediction on the bone-prosthesis contact mechanics was also excellent (< 0.001 mm). The sensitivity of models prediction to uncertainties on modelling parameter was found below 8.4%. The analysis of the successful design resulted in a very good agreement with published retrospective studies. The geometry optimisation of the new prototype lead to a final design with a low risk of failure. The statistical analysis confirmed the minimal risk of the optimised design over the entire population of interest. The performances of the optimised design showed a significant improvement with respect to the first prototype (+35%). Limitations. On the authors opinion the major limitation of this study is on boundary conditions. The muscular forces and the hip joint reaction were derived from the few data available in the literature, which can be considered significant but hardly representative of the entire variability of boundary conditions the implant might face over the patients population. This moved the focus of the research on modelling the musculoskeletal system; the ongoing activity is to develop subject-specific musculoskeletal models of the lower limb from medical images. Conclusions. The developed protocol was able to accurately predict known clinical outcomes when applied to a well-established device and, to support the design optimisation phase providing important information on critical characteristics of the patients when applied to a new prosthesis. The presented approach does have a relevant generality that would allow the extension of the protocol to a large set of orthopaedic scenarios with minor changes. Hence, a failure mode analysis criterion can be considered a suitable tool in developing new orthopaedic devices.