USNS Potomac oil spill, Melville Bay, Greenland, 5 August 1977 : a joint report on the scientific studies and impact assessment /

Mode of access: Internet.

Pyrolysis decomposition of mahogony seeds (Swietenia macrophylla) for alternative fuel oil

A fixed bed pyrolysis has been designed and fabricated for obtaining liquid fuel from Mahogany seeds. The major components of the system are fixed bed pyrolysis reactor, liquid condenser and liquid collectors. The Mahogany seed in particle form is pyrolysed in an externally heated 10 cm diameter and 36 cm high fixed bed reactor with nitrogen as the carrier gas. The reactor is heated by means of a biomass source cylindrical heater from 450oC to 600oC. The products are oil, char and gas. The reactor bed temperature, running time and feed particle size are considered as process parameters. A maximum liquid yield of 54wt% of biomass feed is obtained with particle size of 1.18 mm at a reactor bed temperature of 5500C with a running time of 90 minutes. The oil is found to possess favorable flash point and reasonable density and viscosity. The higher calorific value is found to be 39.9 MJ/kg which is higher than other biomass derived pyrolysis oils.

In the Shadow of Freedom : Life on board the oil tanker

The aim of this study was to look at the freedom of ordinary people as they construct it. The scope, however, was limited to contemporary Finnish sailors and their freedom discourses. The study belongs to the field of the anthropology of religions, which is part of comparative religion. Worldview, which is one of the key concepts in comparative religion, provided the broader theoretical basis of the study. The data consisted of 92 interviews with Finnish professional seafarers conducted in 1996, 1999, 2000 and 2005, field journals that were written during two periods of fieldwork in 1996 and 1999-2000, and correspondence with some of the seafarers during 1999-2005. The analysis process incorporated new rhetoric and metaphor theory. The thesis is in three parts. The first part discusses the methodological challenges of this type of ethnography, the second an ethnography of modern Finnish shipworld focuses on work, organization, hierarchy and gender, and the third part discusses the freedom concepts of seafarers. It was found that seafarers use two kinds of freedom discourse. The first is in line with the stereotypical Jack Tar, a free-roving sailor who is not bound to land and its mundane routines, and the second views shipworld as freedom from freedom, meaning one is not responsible for one s own actions because one is not free to make a choice. It was also found that seafarers are well aware of the stereotypical images that are attached to their profession: they not only deny them, but also utilize, reflect on and construct them.

Impacts of a fuel oil spill on seagrass meadows in a subtropical port, Gladstone, Australia - The value of long-term marine habitat monitoring in high risk areas.

We used an established seagrass monitoring programme to examine the short and longer-term impacts of an oil spill event on intertidal seagrass meadows. Results for potentially impacted seagrass areas were compared with existing monitoring data and with control seagrass meadows located outside of the oil spill area. Seagrass meadows were not significantly affected by the oil spill. Declines in seagrass biomass and area 1 month post-spill were consistent between control and impact meadows. Eight months post-spill, seagrass density and area increased to be within historical ranges. The declines in seagrass meadows were likely attributable to natural seasonal variation and a combination of climatic and anthropogenic impacts. The lack of impact from the oil spill was due to several mitigating factors rather than a lack of toxic effects to seagrasses. The study demonstrates the value of long-term monitoring of critical habitats in high risk areas to effectively assess impacts.

Estudio y análisis de eficiencia de un quemador de fuel oil N. 6, con calentamiento del aire de pulverización para un caldero de 300 BPH

La presente tesis está enfocada al análisis estrictamente de la combustión de un quemador de aceite (fuel oil # 6) para un caldero degeneración de vapor de agua de 300 BHP de potencia, el cual para su atomización del combustible usa aire comprimido a 40 PSI de presión y una temperatura que va desde los 15 ºC hasta los 150 ºC según nuestra particular implementación del sistema de calentamiento. El desarrollo emprende desde un marco teórico de los quemadores, sus partes consistentes, el combustible, clasificación, propiedades y características. De manera muy particular nos centramos en el proceso de combustión por cuanto es la parte medular del presente documento, así como generalidades, fundamentos, los elementos y productos, los comportamientos de éstos en la combustión. Además enfocamos conceptos básicos de tipos de combustión. En una forma analítica se establece la ecuación general de la combustión, una evaluación de la energía liberada en el proceso, en base al volumen y composición de lso productos que intervienne en la misma, yademás de la forma de cómo calibrar el equipo o sistema para obtener combustion lo más eficiente posible, sea produciendo energía calorífica más alta posible con el mínimo requerido posible de combustión. Se enfoca en el presente documento un análisis de las relaciones termodinámicas en la combustión como: la entalpía de los elementos como de los productos, las entalpías de formación de los mismos, le energía interna de los gases productos, y de la entropía o irreversibilidades del proceso total de combustión. La determinación del calor generado más la temperatura de llama adiabática son temas fundamentales en el desarrollo del tema, es por lo tanto parte importante del documento. Ya en el análisis experimental se parte del hecho de tener instalado a modo de prueba un intercambiador de calor para calentar el aire de atomización en uncaldero específico, esto es en un caldero de 300 BHP de potencia, de generación de vapor de agua de 100 PSI de presión, en la empresa Tejidos Pintex, y el análisis va enfocado a determinar la efectividad o no de calentar el aire de atomización, y de ser así cuantificar los beneficios del sistema.

Optimization models for a short sea fuel oil distribution problem

O transporte marítimo e o principal meio de transporte de mercadorias em todo o mundo. Combustíveis e produtos petrolíferos representam grande parte das mercadorias transportadas por via marítima. Sendo Cabo Verde um arquipelago o transporte por mar desempenha um papel de grande relevância na economia do país. Consideramos o problema da distribuicao de combustíveis em Cabo Verde, onde uma companhia e responsavel por coordenar a distribuicao de produtos petrolíferos com a gestão dos respetivos níveis armazenados em cada porto, de modo a satisfazer a procura dos varios produtos. O objetivo consiste em determinar políticas de distribuicão de combustíveis que minimizam o custo total de distribuiçao (transporte e operacões) enquanto os n íveis de armazenamento sao mantidos nos n íveis desejados. Por conveniencia, de acordo com o planeamento temporal, o prob¬lema e divido em dois sub-problemas interligados. Um de curto prazo e outro de medio prazo. Para o problema de curto prazo sao discutidos modelos matemáticos de programacao inteira mista, que consideram simultaneamente uma medicao temporal cont ínua e uma discreta de modo a modelar multiplas janelas temporais e taxas de consumo que variam diariamente. Os modelos sao fortalecidos com a inclusão de desigualdades validas. O problema e então resolvido usando um "software" comercial. Para o problema de medio prazo sao inicialmente discutidos e comparados varios modelos de programacao inteira mista para um horizonte temporal curto assumindo agora uma taxa de consumo constante, e sao introduzidas novas desigualdades validas. Com base no modelo escolhido sao compara¬das estrategias heurísticas que combinam três heur ísticas bem conhecidas: "Rolling Horizon", "Feasibility Pump" e "Local Branching", de modo a gerar boas soluçoes admissíveis para planeamentos com horizontes temporais de varios meses. Finalmente, de modo a lidar com situaçoes imprevistas, mas impor¬tantes no transporte marítimo, como as mas condicões meteorológicas e congestionamento dos portos, apresentamos um modelo estocastico para um problema de curto prazo, onde os tempos de viagens e os tempos de espera nos portos sao aleatórios. O problema e formulado como um modelo em duas etapas, onde na primeira etapa sao tomadas as decisões relativas as rotas do navio e quantidades a carregar e descarregar e na segunda etapa (designada por sub-problema) sao consideradas as decisoes (com recurso) relativas ao escalonamento das operacões. O problema e resolvido por um metodo de decomposto que usa um algoritmo eficiente para separar as desigualdades violadas no sub-problema.

Change in schools it’s more like sort of turning an oil tanker : creating readiness for health promoting schools

Purpose – The purpose of this paper is to add to the evidence of best practice in the implementation of the Health Promoting Schools (HPS) framework by examining the process of creating readiness for change in a large international school in South-East Asia. Using a settings-based approach and guided by readiness for change theory the data collected reflects which factors were most influential in the decision of the leadership team (LT) to adopt a comprehensive HPS model. It follows the process of creating readiness in the early stages of adopting a HPS approach and captures the critical factors effecting leader’s beliefs and support for the program. Design/methodology/approach – This research is a case study of a large pre-K-12 international school in South-East Asia with over 1,800 students. A mixed methods qualitative approach is used including semi-structured interviews and document analysis. The participants are the 12 members of the LT. Findings – Readiness for change was established in the LT who adopted a HPS approach. That is, they adopted a comprehensive model to address health-related priorities in the school and changed the school’s mission and accountability processes to specifically include health. Uncovering the reasons why the LT supported this change was the primary focus of this research. Building the motivation to change involved establishing a number of key beliefs three of which were influential in bringing about readiness for change in this case study. These included the belief that leadership support existed for the proposed change, a belief that there was a need for change with a clear discrepancy in the present and preferred operations in relation to addressing the health issues of the school and the belief that HPS was the appropriate solution to address this discrepancy. Research limitations/implications – Adopting a HPS approach is the first phase of implementation. Long-term research may show if the integrity of the chosen model is maintained as implementation continues. The belief construct of valence, that is, the belief that the change will benefit the change recipient, was not reliably assessed in this research. Further research needs to be conducted to understand how this construct is interpreted in the school setting. The belief construct of valence was not reliably assessed in this research. Further research needs to be done to understand how this construct fits in the school setting. Practical implications – This paper provides a promising example of how health can be integrated into the school’s Mission and Strategic Learning Plan. The example presented here may provide strategies for others working in the field of HPS. Originality/value – Creating readiness is an often over-looked stage of building sustainable change. International schools cater to more than three million students are a rarely researched in regards to health education. It is predicted that the numbers of students in international schools will grow to more than six million in the next ten years.

Bioremediation with White-Rot Fungi at Fisherville Mill: Analyses of Gene Expression and Number 6 Fuel Oil Degradation

Extracellular enzymes that white-rot fungi secrete during lignin decay have been proposed as promising agents for oxidizing pollutants. We investigated the abilities of the white-rot fungi Punctularia strigosozonata, Irpex lacteus, Trichaptum biforme, Phlebia radiata, Trametes versicolor, and Pleurotus ostreatus to degrade Number 6 fuel oil in wood sawdust cultures. Our goals are to advise bioremediation efforts at a brownfield redevelopment site on the Blackstone River in Grafton, Massachusetts and to contribute to the understanding of decay mechanisms in white-rot fungi. All species tested degraded a C10 alkane. When cultivated for 6 months, Irpex lacteus, T. biforme, P. radiata, T. versicolor and P. ostreatus also degraded a C14 alkane and the polycyclic aromatic hydrocarbon phenanthrene. Gene expression analyses of P. strigosozonata indicate differential gene expression in the presence of Number 6 oil and on pine and aspen sawdust.

Alegatos que presentan ante la Suprema Corte de Justicia de la Nación las siguentes compañías y personas, Compañía Transcontinental de Petróleo S.A., International Petroleum Company, Huasteca Petroleum Company, Tuxpan Petroleum Company, Compañía Mexicana de Petróleo S.A., Tamiahua Petroleum Company, Señores Doheny & Bridge, The Texas Company of México, La Atlántica, New England Fuel Oil Company, Pánuco-Boston Oil Company, Mexican Gulf Oil Company, Continental Mexican Petroleum Company, Gompañía [sic] de Petróleo "La Corona", Compañía Petrolera Tal Vez, Compañía Terminal de Productores, Scotish [sic] Mexican Oil Company, Charles F. de Ganahl, El Azadón Company, Soledad Oil Company, Piedras Development Company, Tancochin Oil Company, Lot Seventeen, Malcon Anderson Company, George L. Christie, Seabord Fuel Company, Tamalin Oil Company, Juanedo Oil Company, Compañía Indiana y El Tigre, Compañía Agrícola Pretrolera [sic] Mexicana, Compañía

Mode of access: Internet.

Piping of industrial fuels. Calculations, data and step-by-step instructions on design and installation of gas, oil and gasoline piping in industrial plant projects, including fuel oil and gasoline storage.

Mode of access: Internet.

Organizational, direct support, and general support maintenance repair parts and special tools list : hammer, pile-driver, self-powered; diesel engine driven, w/fuel oil tank and lubricating oil tank, NSN 3895-00-854-4150, link-belt speeder model 440.

"This publication supersedes TM 5-3895-333-25P dated 18 February 1969 and all changes"--P. i.

Operator, organizational, direct support, general support, and depot maintenance manual : hammer, pile-driver, self-powered, w/fuel oil tank and lubricating oil tank (Link-Belt Speeder mdl 440) FSN 3895-854-4150.

"December 1968."

Fuel oil journal.

Title from cover.

Fuel additive

A fuel additive comprising one or more complex oxides having a nominal compn. as set out in formula (1): AxB1-yMyOn; wherein A is selected from one or more group III elements including the lanthanide elements or one or more divalent or monovalent cations; B is selected from one or more elements with at. no. 22 to 24, 40 to 42 and 72 to 75; M is selected from one or more elements with at. no. 25 to 30; x is defined as a no. where 0 < x ≤ l; y is defined as a no. where 0 ≤ y < 0.5. [on SciFinder(R)]