Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Estudo da secagem de polpa de coco verde em leito de jorro e viabilidade de sua utilização na indústria

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Influência de encapsulantes e do método de secagem nas propriedades físico-químicas e atributos de qualidade de polpa de maracujá (Passifora edulis f. flavicarpa)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da influência da proporção de um mix leite/popa da marcacujá na produção de pó obtido por três diferentes tipos de secagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Construção e desenvolvimento de um secador de leito pulso-fluidizado para secagem de pastas e polpas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da secagem do bagaço de cajá usando planejamento fatorial composto central

This work deals with the kinetics assay of Cajá (Spondias mombin L.) bagasse drying by an experimental design using a tray dryer. In order to add-value to this product a kinetic study has been carried out. A central composite experimental design has been carried out to evaluate the influence of the operational variables: input air temperature (55; 65 e 75ºC); the drying air velocity (3.2; 4.6 e 6.0 m/s) and the fixed bed thickness (0.8; 1.2 e 1.6 cm) and as response variable the the moisture content (dry basis). The results showed that the diffusional Fick model fitted quite well the experimental data. The best condition found has been input air temperature of 75ºC, drying air velocity of 6.0 m/s as well as fixed bed thickness of 0.8 cm. The experimental design assay showed that the main effects as well as the second ones were significant at 95% confindance level. The best operational condition according to statistical planning was 75 oC input air temperature, 6.0 m.s-1 drying air velocity and 0.8 cm fixed bed thickness. In this case, the equilibrium moisture content (1.3% dry basis) occured at 220 minutes

Desidratação de polpa de manga em leito de espuma com e sem intermitência térmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade microbiológica e ocorrência de leveduras em polpas congeladas de frutas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sacarificação da polpa cítrica por hidrólise ácida e cultivo pelo processo de batelada simples com reciclo de Trichoderma reesei ou Aspergillus niger com produção de celulases e poligalacturonases

Pós-graduação em Microbiologia - IBILCE

Avaliação da polpa cítrica peletizada como aditivo no processo de ensilagem dos capins Tanzânia e Marandu

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade microbiológica de bebidas lácteas fermentadas, com adição de polpas de frutas, comercializadas na região de São José do Rio Preto, SP.

As bebidas lácteas fermentadas são produtos formulados contendo iogurte, soro de leite, polpa de frutas, além de outras matérias-primas e aditivos permitidos. O produto final deve apresentar os micro-organismos de forma viável e abundante. Sua popularidade vem aumentando significativamente, principalmente devido aos seus benefícios nutricionais, ao menor custo do produto para o fabricante, à redução do preço final para o consumidor e por apresentar baixa viscosidade, sendo consumida como bebida suave e refrescante. Apesar do processo de fabricação ser considerado simples, utilizando-se principalmente os equipamentos disponíveis nas indústrias lácteas, estes produtos podem estar sujeitos à contaminação microbiana, quando não atendidas as condições elementares de higiene e sanidade. Tal contaminação pode ser representada por leveduras, coliformes totais, termotolerantes e bolores. Considerando os aspectos mencionados, o objetivo deste trabalho foi avaliar a qualidade microbiológica de bebidas lácteas fermentadas, com adição de polpas de frutas, comercializadas na região de São José do Rio Preto û SP, por meio das seguintes análises microbiológicas: contagem de bolores e leveduras, determinação do Número Mais Provável (NMP) de coliformes totais, temotolerantes e pesquisa de Escherichia coli e de Salmonella spp. Foi ainda efetuada a determinação do pH eletrométrico. Após a obtenção dos resultados verificou-se que 20% das amostras analisadas não atenderam ao padrão microbiológico estabelecido na legislação vigente, para coliforme termotolerentes, evidenciando positividade na pesquisa de Escherichia coli, sendo por este motivo, considerados como produtos em condições sanitárias insatisfatórias, portanto, produtos impróprios para o consumo humano.(AU)

Caracterização Físico-Química de Polpas de Frutas do Bioma Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção convencional x integrada em pessegueiro na Depressão Central do Rio Grande do Sul

A produção integrada (PI) procura reduzir o uso de agrotóxicos, eliminar outros produtos considerados perigosos para a saúde humana ou prejudicial para o meio ambiente, e ao mesmo tempo, fomentar as boas práticas de manejo agrícola. Assim o objetivo deste trabalho é comparar os sistemas de produção convencional (PC) e integrado de pêssegos da cv. Marli, em relação as principais práticas de manejo da planta e do solo, controle fitossanitário, aspectos econômicos, bem como a qualidade da fruta, a fim de que possa estabelecer o sistema de Produção Integrada de Frutas de Caroço (PIFC) na Depressão Central-RS. Na área conduzida sob PI, foram utilizadas as práticas de acordo com o manejo preconizado pela Organização Internacional de Controle Biológico e no sistema de PC, aquelas de uso comum pelo produtor. A produção de pêssegos da cv. Marli, conduzidos em ambos os sistemas, não foi afetada. Na área de PI, houve menor número de pêssegos por planta comparada com a PC, entretanto os pêssegos apresentaram maior tamanho, peso e calibre, não afetando a produção final de pêssegos. A classificação das frutas demonstrou que os pêssegos provenientes do sistema de PI são na maioria pertencente a CAT I (diâmetro superior a 57 mm), enquanto os do sistema PC são de CAT II (57 a 48 mm). Em relação às pragas e doenças houve maior incidência de grafolita (Grapholita molesta) e podridão parda (Monilinia fructicola) no pomar de pêssegos provenientes do sistema de PI. O monitoramento de pragas e o manejo de doenças proporcionaram uma sensível redução na aplicação de agroquímicos. A qualidade pós-colheita nos pêssegos provenientes do pomar de PI, apresentou maior acidez e firmeza de polpa nas frutas. Os resultados alcançados da avaliação conjunta nos dois sistemas permitem concluir que é possível produzir pêssegos de melhor qualidade, mantendo a produtividade com uma redução considerável no uso de agroquímicos.

Effect of pectinolitic enzymes on the physical properties of caja-manga (Spondias cytherea Sonn.) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)