Impact of Perillus bioculatus on the Colorado potato beetle and plant damage /

"Issued September 1978"--T.p. verso.

Herbivore intoxication as a potential primary function of an inducible volatile plant signal

Plants release herbivore-induced volatiles (HIPVs), which can be used as cues by plants, herbivores and natural enemies. Theory predicts that HIPVs may initially have evolved because of their direct benefits for the emitter and were subsequently adopted as infochemicals. Here, we investigated the potential direct benefits of indole, a major HIPV constituent of many plant species and a key defence priming signal in maize. We used indole-deficient maize mutants and synthetic indole at physiologically relevant doses to document the impact of the volatile on the generalist herbivore Spodoptera littoralis. Our experiments demonstrate that indole directly decreases food consumption, plant damage and survival of S. littoralis caterpillars. Surprisingly, exposure to volatile indole increased caterpillar growth. Furthermore, we show that S. littoralis caterpillars and adults consistently avoid indole-producing plants in olfactometer experiments, feeding assays and oviposition trials. Synthesis. Together, these results provide a potential evolutionary trajectory by which the release of a HIPV as a direct defence precedes its use as a cue by herbivores and an alert signal by plants. Furthermore, our experiments show that the effects of a plant secondary metabolite on weight gain and food consumption can diverge in a counterintuitive manner, which implies that larval growth can be a poor proxy for herbivore fitness and plant resistance.

Distribution and abundance of white grubs (Coleoptera: Scarabaeidae) on groundnut in southern India

Scarab species associated with groundnuts were surveyed in Andhra Pradesh, Karnataka and Tamil Nadu, southern India, between 1995 and 2001. Scarab adults were collected from trees on which they were feeding and/or mating, and larvae (white grubs) from groundnut fields. Holotrichia species, especially H. reynaudi and H. serrata were the major species associated with groundnut. H. reynaudi predominated in the central Deccan area, while H. serrata was most abundant in areas to the south and west. A new, undescribed, Holotrichia species near H. consanguinea was collected south and south-west of Hyderabad in mixed populations with H. reynaudi. However, the full extent of this new species’ distribution remains uncertain. H. rufoflava was rarely associated with groundnut, but was common as an adult at some locations. Other genera encountered during surveys were Anomala, Adoretus, Schizonycha, Autoserica. In survey data, densities of Holotrichia larvae and ‘all other white grubs’ were both very highly correlated with % of damaged groundnut plants. These correlations in combination with concurrent observations of plant damage establish a causal link between white grubs and plant damage and death in southern Indian groundnut. Ranking of preferred host trees for adults were developed from field observations for four Holotrichia species and Schizonycha spp. and will assist grower-initiated surveys of pest occurrence. In combination with insecticide efficacy data published elsewhere, the survey provides the basis for an environmentally friendly and economically viable pest-management system for white grubs on groundnut in southern India.

Predator presence moves Helicoverpa armigera larvae to distraction

Displacement of herbivorous insects by the presence of predators on whole plants has rarely been studied. By semi-continuous observations of an externally feeding insect herbivore and a predator, we show how the mere presence of the predator, Geocoris lubra Kirkaldy (Hemiptera: Geocoridae), on a plant can have a strong influence on the movement and behaviors of Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) larvae. The presence of predators, as opposed to mortality by predators, influenced the proportion of larvae feeding, resting and implementing avoidance activities. In addition, the proportion of time individual larvae allocated to feeding, resting and dropping off plants was affected when predators were present with and without contact between the two. Predators do more than just reduce numbers of herbivores; they influence feeding, displacement and subsequently the distribution of plant damage.

Foraging behaviours of Diachasmimorpha kraussii (Fullaway) (Hymenoptera: Braconidae) and its host Bactrocera tryoni (Froggatt) (Diptera: Tephritidae) in a nectarine (Prunus persica (L.) Batsch var. nectarina (Aiton) Maxim) orchard

Diachasmimorpha kraussii is a larval parasitoid of dacine fruit flies. Host utilisation behaviour, including field foraging behaviour, is poorly known in this species. The diurnal foraging behaviour of D. kraussii and one of its common hosts, Bactrocera tryoni, in a nectarine orchard was concurrently recorded. Observations of mating, resting, feeding and oviposition were taken two-hourly on 42 trees, commencing at 07:00 h and terminating at 17:30 h, for 17 days. Resting and oviposition were common events within the orchard for both species, while mating behaviours were not recorded in the orchard for either species. Feeding was not observed for D. kraussii and was rare for B. tryoni. At the level of the individual tree there was a very weak, but significant correlation between parasitoid and fly abundance over a day, but when broken down to the individual observation periods the correlations were absent, or were weakly significant in an inconsistent manner (i.e. sometimes positively correlated, sometimes negatively correlated). At the orchard level, abundance of the parasitoid was not correlated with adult fly abundance. Results suggest that D. kraussii forage independently to adult B. tryoni, a result consistent with a prediction that their foraging is largely driven by larval or plant damage cues.

Combining physical, cultural and biological methods: prospects for integrated non-chemical weed management strategies

Physical, cultural and biological methods for weed control have developed largely independently and are often concerned with weed control in different systems: physical and cultural control in annual crops and biocontrol in extensive grasslands. We discuss the strengths and limitations of four physical and cultural methods for weed control: mechanical, thermal, cutting, and intercropping, and the advantages and disadvantages of combining biological control with them. These physical and cultural control methods may increase soil nitrogen levels and alter microclimate at soil level; this may be of benefit to biocontrol agents, although physical disturbance to the soil and plant damage may be detrimental. Some weeds escape control by these methods; we suggest that these weeds may be controlled by biocontrol agents. It will be easiest to combine biological control with. re and cutting in grasslands; within arable systems it would be most promising to combine biological control (especially using seed predators and foliar pathogens) with cover-cropping, and mechanical weeding combined with foliar bacterial and possibly foliar fungal pathogens. We stress the need to consider the timing of application of combined control methods in order to cause least damage to the biocontrol agent, along with maximum damage to the weed and to consider the wider implications of these different weed control methods.

Genética do acamamento em trigo (Triticum aestivum L.) e a identificação do caráter para seleção

O problema do acamamento em trigo tem chamado a atenção dos melhoristas devido à severidade dos danos causados as plantas com reflexo no rendimento e na qualidade dos grãos. É um caráter difícil de ser estudado diretamente, dados a múltiplas interações com o ambiente. Muitos trabalhos foram desenvolvidos procurando identificar métodos para seleção indireta. A estatura de planta foi exaustivamente estudada por ser um caráter de alta herdabilidade e fortemente correlacionado com o acamamento; entretanto, plantas com estatura abaixo de 70 cm são inadequadas para o cultivo devido a sua pouca competitividade com as ervas daninhas e por apresentarem dificuldades para a colheita mecanizada. Neste sentido, no presente trabalho foram testados os vários caracteres relacionados com o acamamento e métodos indiretos que possibilitem maiores ganhos na seleção. Foi identificado o coeficiente de resistência do colmo, método internacionalmente conhecido com cLr, como sendo a metodologia mais eficiente para seleção indireta em populações segregantes. Foi também mensurada a dissimilaridade genética entre dez cultivares de trigo recomendadas para cultivo no Rio Grande do Sul e Santa Catarina, no ano 2000, e mais os genótipos IAC 5 e TB 951. A genética do caráter cLr foi estudada através da Análise de Gerações, metodologia também conhecida como Teste de Escala Conjunta. Foram avaliadas a natureza e a magnitude dos efeitos gênicos envolvidos o que ficou determinado que a aditividade e dominância atuam de maneira similar. Não foram encontrados efeitos epistáticos e a herdabilidade no sentido restrito foi de mediana a alta. O caráter cLr parece ser controlado por dois genes independentes com dois alelos cada, sendo que o genótipo duplamente recessivo (aabb) expressou fenotipicamente os valores mais altos para resistência ao acamamento.

Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Integração da resistência de plantas e predação por Chrysoperla externa (Hagen) (Neuroptera: Chrysopidae) para o manejo de Schizaphis graminum (Rondani) (Hemiptera: Aphididae) em sorgo

A integração entre plantas resistentes e agentes de controle biológico pode ser uma alternativa viável para o manejo do pulgão-verde, Schizaphis graminum (Rondani), na cultura do sorgo. Experimentos foram conduzidos com a finalidade de avaliar o efeito de quatro genótipos de sorgo: GR 11111 e TX 430 x GR 111 (resistentes), GB 3B (moderadamente resistente), e BR 007B (suscetível), sobre o controle biológico do pulgão S. graminum realizado pelo predador Chrysoperla externa (Hagen). Para isso, avaliaram-se diferentes níveis de infestação de S. graminum, na presença e ausência do predador, em casa-de-vegetação e a viabilidade de controle de S. graminum no campo. O efeito do predador foi notado 25 dias após a infestação, proporcionando maior crescimento das plantas e menores danos. Os danos também foram menores nos genótipos resistentes e aumentaram com a elevação dos níveis de infestação, sendo menores na presença do predador C. externa. em condições de campo, a integração dos dois métodos de controle proporcionou 83% de redução de danos, quando se utilizou o genótipo resistente TX 430 x GR 111, que foi considerado o mais promissor dentre os estudados.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.

Air-assistance in spray booms which have different spray volumes and nozzle types for chemically controlling spodoptera frugiperda on corn

The study aimed to evaluate the performance of air assistance in spray booms using different types of nozzles and spray volumes. We took into account spray deposits, fall armyworm control and crop corn performance in a narrow row cropping system. The experiment was carried out at the experimental area of Sao Paulo State University, Botucatu/SP, Brazil, during the 2008/2009 agricultural season, in randomized blocks with a factorial scheme (2×2+1) and four replications. Two spray nozzles (flat fan nozzle and hollow cone nozzle) were tested, combined with two air assistance levels in the spray boom (with and without air assistance) and a treatment control. In the experimental spraying, Spinosad insecticide was sprayed in amounts of 48 g active substance (a.s.)/ha. The air assistance in the spray boom increased the spray deposits in the V 4 growth stage of the corn plants. Moreover, the application of this technology showed higher efficiency on fall armyworm control, reaching a 100% level 15 days after spraying, in the V 10 growth stage of the plants. The hollow cone nozzle increased the spray deposit level on the corn plants compared with the flat fan nozzle, at growth stage V 4. However, the flat fan nozzle, combined with air assistance technology, was more effective for controlling fall armyworm in the same growth stage (V 4), although the hollow cone nozzle increased the deposit levels on the plants. All the technologies tested in the study promoted a reduction of plant damage from fall armyworm attack. Corn productivity is directly related to the control efficiency of fall armyworm.

Effects of spray nozzles and spray volume on spodoptera frugiperda management and narrow row corn performance

The high demand of pesticides in the production systems makes the application technology one of the main alternatives to optimize the products efficiency. In this context, the study aimed to evaluate the effects of spray nozzles and spray volumes on spraying deposits, armyworm control and crop corn performance in narrow row sowing system. The experiment was carried out at experimental area of Sao Paulo State University, Campus of Botucatu/SP, Brazil, during the 2009/2010 agricultural season, in randomized blocks with factorial scheme (2x2+1) and four replications. It was tested two flat fan spray nozzles (with and without air induction) combined with two spray volumes (100 and 200 L ha-1) plus a control treatment. There was no influence of spray nozzles (without air induction) in the spray deposits levels on plants. However, the flat fan nozzle with air induction was more effective on fall armyworm, with 100% of control against 47.84% from other at 15 days after spraying. The increase in the spray volume promoted high spray deposits (415.4 and 388.6 μL g-1 dry mass for flat fan nozzle with and without air induction, respectively at V10 growth stage) and consequently, the highest spray volume (200 L-1) was more efficient in the fall armyworm suppression, with 100% of control. All the technologies tested showed lower plant injury from fall armyworm. The insecticide sprayed with different technologies did not affect the parameters of plant height and leaf area index. The corn productivity was directly related with control efficiency of fall armyworm. © 2012 Academic Journals Inc.

Distribuição espacial e amostragem seqüencial de ninfas e adultos de Diaphorina citri Kuwayama (Hemiptera: Psyllidae) na cultura de citros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle do mofo branco (Sclerotinia sclerotiorum) do feijoeiro com o fungicida procimidone aplicado em pulverização e fungigação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)