Modeling and simulation of severe slugging in air-water pipeline-riser systems

A mathematical model, numerical simulations and stability and flow regime maps corresponding to severe slugging in pipeline riser systems, are presented. In the simulations air and water were used as flowing fluids. The mathematical model considers continuity equations for liquid and gas phases, with a simplified momentum equation for the mixture, neglecting inertia. A drift-flux model, evaluated for the local conditions in the riser, is used as a closure law. The developed model predicts the location of the liquid accumulation front in the pipeline and the liquid level in the riser, so it is possible to determine which type of severe slugging occurs in the system. The numerical procedure is convergent for different nodalizations. A comparison is made with experimental results corresponding to a catenary riser, showing very good results for slugging cycle and stability and flow regime maps. (c) 2010 Elsevier Ltd. All rights reserved.

Pneumatic Conveying of Granular Materials in a Pilot Scale Downer-Riser System

Studies regarding the field of this work aim to substitute industrial mechanical conveyors with pneumatic conveyors to overcome the disadvantages in solids flow regulation and risks posed to production and health. The experimental part of this work examines how the granular material properties, fluidizing airflow rate, equipment geometry, and pressures along the pipes affect the mass flow rate through the system. The results are compared with those obtained from previous experiments conducted with alumina. Experiments were carried out with a pilot scale downer-riser system at Outotec Research Center Frankfurt. Granular materi-als used in this work are named as sand, ilmenite, iron ore 1 and iron ore 2.

Configuring an open pipeline fulfilment system - a simulation study in an automotive context

Automotive producers are adopting multi-modal fulfillment models in which customers can be fulfilled by products from stock, by allocating as yet unmade products that are in the planning pipeline, or by building a product to order. This study explores how fulfillment is sensitive to several parameters of the system and how they interact with different methods for sequencing products into the production plan.

Modeling and simulation of severe slugging with mass transfer effects

A mathematical model and numerical simulations are presented to investigate the dynamics of gas, oil and water flow in a pipeline-riser system. The pipeline is modeled as a lumped parameter system and considers two switchable states: one in which the gas is able to penetrate into the riser and another in which there is a liquid accumulation front, preventing the gas from penetrating the riser. The riser model considers a distributed parameter system, in which movable nodes are used to evaluate local conditions along the subsystem. Mass transfer effects are modeled by using a black oil approximation. The model predicts the liquid penetration length in the pipeline and the liquid level in the riser, so it is possible to determine which type of severe slugging occurs in the system. The method of characteristics is used to simplify the differentiation of the resulting hyperbolic system of equations. The equations are discretized and integrated using an implicit method with a predictor-corrector scheme for the treatment of the nonlinearities. Simulations corresponding to severe slugging conditions are presented and compared to results obtained with OLGA computer code, showing a very good agreement. A description of the types of severe slugging for the three-phase flow of gas, oil and water in a pipeline-riser system with mass transfer effects are presented, as well as a stability map. (C) 2011 Elsevier Ltd. All rights reserved.

Sistema de controle de escoamento de gás natural em dutos de distribuição com detecção de vazamentos utilizando redes neurais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudio técnico-económico del criterio distancia foco emisor y estructura almacén de CO2. Aplicación a un caso de estudio en la Cuenca del Duero.

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view.

Estudio técnico-económico del criterio distancia entre fuente y almacén de CO2 Recurso electrónico : Aplicación a caso de estudio en la cuenca del Duero

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. Abstract This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view

Pipeline accident report : Exxon Gas System, Inc., natural gas explosion and fire, Robstown, Texas, December 7, 1976.

Report date: Oct. 13, 1977.

Development and evaluation of an automated annotation pipeline and cDNA annotation system

Manual curation has long been held to be the gold standard for functional annotation of DNA sequence. Our experience with the annotation of more than 20,000 full-length cDNA sequences revealed problems with this approach, including inaccurate and inconsistent assignment of gene names, as well as many good assignments that were difficult to reproduce using only computational methods. For the FANTOM2 annotation of more than 60,000 cDNA clones, we developed a number of methods and tools to circumvent some of these problems, including an automated annotation pipeline that provides high-quality preliminary annotation for each sequence by introducing an uninformative filter that eliminates uninformative annotations, controlled vocabularies to accurately reflect both the functional assignments and the evidence supporting them, and a highly refined, Web-based manual annotation tool that allows users to view a wide array of sequence analyses and to assign gene names and putative functions using a consistent nomenclature. The ultimate utility of our approach is reflected in the low rate of reassignment of automated assignments by manual curation. Based on these results, we propose a new standard for large-scale annotation, in which the initial automated annotations are manually investigated and then computational methods are iteratively modified and improved based on the results of manual curation.

Decision support system for pipeline route selection

Presents information on a study which proposed a decision support system (DSS) for a petroleum pipeline route selection with the application of analytical hierarchy process. Factors governing route-selection for cross-country petroleum pipelines; Application of the DSS from an Indian perspective; Cost benefit comparison of the shortest route and the optimal route; Results and findings.

Feasibility study and flow scheduling optimization of a multi-product pipeline system

The first goal of this study is to analyse a real-world multiproduct onshore pipeline system in order to verify its hydraulic configuration and operational feasibility by constructing a simulation model step by step from its elementary building blocks that permits to copy the operation of the real system as precisely as possible. The second goal is to develop this simulation model into a user-friendly tool that one could use to find an “optimal” or “best” product batch schedule for a one year time period. Such a batch schedule could change dynamically as perturbations occur during operation that influence the behaviour of the entire system. The result of the simulation, the ‘best’ batch schedule is the one that minimizes the operational costs in the system. The costs involved in the simulation are inventory costs, interface costs, pumping costs, and penalty costs assigned to any unforeseen situations. The key factor to determine the performance of the simulation model is the way time is represented. In our model an event based discrete time representation is selected as most appropriate for our purposes. This means that the time horizon is divided into intervals of unequal lengths based on events that change the state of the system. These events are the arrival/departure of the tanker ships, the openings and closures of loading/unloading valves of storage tanks at both terminals, and the arrivals/departures of trains/trucks at the Delivery Terminal. In the feasibility study we analyse the system’s operational performance with different Head Terminal storage capacity configurations. For these alternative configurations we evaluated the effect of different tanker ship delay magnitudes on the number of critical events and product interfaces generated, on the duration of pipeline stoppages, the satisfaction of the product demand and on the operative costs. Based on the results and the bottlenecks identified, we propose modifications in the original setup.

Iis--integrated Interactome System: A Web-based Platform For The Annotation, Analysis And Visualization Of Protein-metabolite-gene-drug Interactions By Integrating A Variety Of Data Sources And Tools.

High-throughput screening of physical, genetic and chemical-genetic interactions brings important perspectives in the Systems Biology field, as the analysis of these interactions provides new insights into protein/gene function, cellular metabolic variations and the validation of therapeutic targets and drug design. However, such analysis depends on a pipeline connecting different tools that can automatically integrate data from diverse sources and result in a more comprehensive dataset that can be properly interpreted. We describe here the Integrated Interactome System (IIS), an integrative platform with a web-based interface for the annotation, analysis and visualization of the interaction profiles of proteins/genes, metabolites and drugs of interest. IIS works in four connected modules: (i) Submission module, which receives raw data derived from Sanger sequencing (e.g. two-hybrid system); (ii) Search module, which enables the user to search for the processed reads to be assembled into contigs/singlets, or for lists of proteins/genes, metabolites and drugs of interest, and add them to the project; (iii) Annotation module, which assigns annotations from several databases for the contigs/singlets or lists of proteins/genes, generating tables with automatic annotation that can be manually curated; and (iv) Interactome module, which maps the contigs/singlets or the uploaded lists to entries in our integrated database, building networks that gather novel identified interactions, protein and metabolite expression/concentration levels, subcellular localization and computed topological metrics, GO biological processes and KEGG pathways enrichment. This module generates a XGMML file that can be imported into Cytoscape or be visualized directly on the web. We have developed IIS by the integration of diverse databases following the need of appropriate tools for a systematic analysis of physical, genetic and chemical-genetic interactions. IIS was validated with yeast two-hybrid, proteomics and metabolomics datasets, but it is also extendable to other datasets. IIS is freely available online at: http://www.lge.ibi.unicamp.br/lnbio/IIS/.

GIS applied to geotechnical and environmental risk management in a Brazilian oil pipeline

The paper presents the development of a decision support system for the management of geotechnical and environmental risks in oil pipelines using a geographical information system. The system covers a 48.5 km long section of the So Paulo to Brasilia (OSBRA) oil pipeline, which crosses three municipalities in the northeast region of the So Paulo state (Brazil) and represents an area of 205.8 km(2). The spatial database was created using geo-processing procedures, surface and intrusive investigations and geotechnical reports. The risk assessment was based mainly on qualitative models (relative numeric weights and multicriteria decision analysis) and considered pluvial erosion, slope movements, soil corrosion and third party activities. The maps were produced at a scale of 1:10,000.