Optimization of pipeline transport for CO2 sequestration

Coal fired power generation will continue to provide energy to the world for the foreseeable future. However, this energy use is a significant contributor to increased atmospheric CO2 concentration and, hence, global warming. Capture and disposal Of CO2 has received increased R&D attention in the last decade as the technology promises to be the most cost effective for large scale reductions in CO2 emissions. This paper addresses CO2 transport via pipeline from capture site to disposal site, in terms of system optimization, energy efficiency and overall economics. Technically, CO2 can be transported through pipelines in the form of a gas, a supercritical. fluid or in the subcooled liquid state. Operationally, most CO2 pipelines used for enhanced oil recovery transport CO2 as a supercritical fluid. In this paper, supercritical fluid and subcooled liquid transport are examined and compared, including their impacts on energy efficiency and cost. Using a commercially available process simulator, ASPEN PLUS 10.1, the results show that subcooled liquid transport maximizes the energy efficiency and minimizes the Cost Of CO2 transport over long distances under both isothermal and adiabatic conditions. Pipeline transport of subcooled liquid CO2 can be ideally used in areas of cold climate or by burying and insulating the pipeline. In very warm climates, periodic refrigeration to cool the CO2 below its critical point of 31.1 degrees C, may prove economical. Simulations have been used to determine the maximum safe pipeline distances to subsequent booster stations as a function of inlet pressure, environmental temperature and ground level heat flux conditions. (c) 2005 Published by Elsevier Ltd.

Use a simulation tool for multi-commodity pipeline scheduling

Pipeline transport represents one of the most important means of moving oil derivatives to different locations. It is both a reliable and inexpensive means of transport, and it yields small variable costs along with a great degree of reliability. Pipeline scheduling is not a trivial task; it involves considerable time from schedulers. Discussed here is a real-application case of a tool that helps schedulers simulate pipeline performance as a means of creating a feasible schedule for a particular time span.

顺序输送混油过程的二维数值分析

采用二维对流扩散模型对成品油顺序输送中的混油问题进行了数值模拟研究,运用目前求解对流扩散方程比较有效的两步法,对层流态和湍流态顺序输送的混油段流动分别进行了数值计算,分析了层流态和湍流态下的顺序输送规律,表明湍流态输送比层流态输送的混油量要小,并得到了混油截面平均浓度随时间的变化特点,以及湍流扩散系数对混油浓度的影响规律

Diretrizes para execução dos estudos geológico-geotécnicos e ambientais voltados à implantação de dutovias

Due to the new discoveries of oil and gas reservoirs, and also the increasing production of bio-fuels, the brazilian general pipeline system is being vertiginously extended. On the other hand, there is a lack of clear parameters that would allow a better utilization of the geological-geotechnical studies in the process of environmental licensing of pipeline systems. Therefore, this paper presents guidelines that would orientate the environmental licensing procedures to build pipeline systems, and also the geological-geotechnical studies that would support the characterization of the physical context. The method applied in this study consisted in the existing data survey and in their organization, analysis and review. In doing so, there is a well-subsidy integration of the many steps of the pipeline system implementation, the required environmental licenses and the investigation methods of the correlated physical context. As a result, it’s presented a flowchart of the guidelines, detailing the interaction between the environmental licensing, the geological-geotechnical studies and the phases of the pipeline’s project.

Estudio técnico-económico del criterio distancia foco emisor y estructura almacén de CO2. Aplicación a un caso de estudio en la Cuenca del Duero.

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view.

Estudio técnico-económico del criterio distancia entre fuente y almacén de CO2 Recurso electrónico : Aplicación a caso de estudio en la cuenca del Duero

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. Abstract This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view

Investment in transport capacity and regulation of regional monopolies in natural gas commodity markets

This paper develops a model of the regulator-regulated firm relationship in a regional natural gas commodity market which can be linked to a competitive market by a pipeline. We characterize normative policies under which the regulator, in addition to setting the level of the capacity of the pipeline, regulates the price of gas, under asymmetric information on the firm’s technology, and may (or may not) operate (two-way) transfers between consumers and the firm. We then focus on capacity and investigate how its level responds to the regulator’s taking account of the firm’s incentive compatibility constraints. The analysis yields some insights on the role that transport capacity investments may play as an instrument to improve the efficiency of geographically isolated markets.

Analysis of service stress corrosion cracking in a natural gas transmission pipeline, active or dormant?

Stress corrosion cracks (SCC) had been found in a natural gas transmission pipeline during a dig-up and inspection program. The question was raised as to whether the SCC was active or dormant. This paper describes the resultant investigation to determine if a particular service crack was actively growing. The strategy adopted was to assess the appearance of the fracture surface of the service crack and to compare with expectations from laboratory specimens with active SCC. The conclusions from this study are as follows. To judge whether a crack in the service pipe is active or dormant, it is reasonable to compare the very crack tip of the service crack and a fresh crack in a laboratory sample. If the crack tip of the active laboratory sample is similar to that of the service pipe, it means the crack in the service pipe is likely to be active. From the comparison of the crack tip between the service pipe and the laboratory samples, it appears likely that the cracks in the samples extracted from service were most likely to have been active intergranular stress corrosion cracks. (C) 2003 Elsevier Ltd. All rights reserved.

Evaluation and development of drainage and pipeline construction processes

In 1974 Dr D M Bramwell published his research work at the University of Aston a part of which was the establishment of an elemental work study data base covering drainage construction. The Transport and Road Research Laboratory decided to, extend that work as part of their continuing research programme into the design and construction of buried pipelines by placing a research contract with Bryant Construction. This research may be considered under two broad categories. In the first, site studies were undertaken to validate and extend the data base. The studies showed good agreement with the existing data with the exception of the excavation trench shoring and pipelaying data which was amended to incorporate new construction plant and methods. An inter-active on-line computer system for drainage estimating was developed. This system stores the elemental data, synthesizes the standard time of each drainage operation and is used to determine the required resources and construction method of the total drainage activity. The remainder of the research was into the general topic of construction efficiency. An on-line command driven computer system was produced. This system uses a stochastic simulation technique, based on distributions of site efficiency measurements to evaluate the effects of varying performance levels. The analysis of this performance data quantities the variability inherent in construction and demonstrates how some of this variability can be reconciled by considering the characteristics of a contract. A long term trend of decreasing efficiency with contract duration was also identified. The results obtained from the simulation suite were compared to site records collected from current contracts. This showed that this approach will give comparable answers, but these are greatly affected by the site performance parameters.