Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Untersuchungen zum Mechanismus der zellulären und zellfreien DNA-Schädigung durch photosensibilisierende Arzneistoffe

Einige Arzneistoffe verursachen unter dem Einfluss von Sonnenlichtstrahlung folgenschwere Hautveränderungen. In der Arbeit wurden für sechs Photosensibilisatoren erstmals „Fingerabdrücke“ des zellfreien und zellulären photoinduzierten DNA Schadens in Form von Schadensprofilen erstellt. Untersucht wurden das Phenothiazin Chlorpromazin, sowie dessen Derivate 2-Hydroxypromazin, Chlorpromazinsulfoxid und Promazin; die Fluorchinolone Ciprofloxacin und Lomefloxacin; sowie Doxycyclin und Methylenblau unter Bestrahlung mit künstlich erzeugtem Sonnenlicht. Neben Strangbrüchen in der DNA konnten durch den Einsatz von spezifischen DNA-Reparaturendonukleasen als Sonden die Mengen an oxidativen Purinmodifikationen, oxidative Pyrimidinmodifikationen und abasische Stellen bestimmt werden. Durch Verwendung von modulierenden Zusätzen wurde die Beteiligung von reaktiven Sauerstoffspezies überprüft. Besonders bei den Phenothiazinen zeigten sich Besonderheiten hinsichtlich der DNA-Schädigung. Promazin induziert unter Photoaktivierung, vermutlich über einen reduktiven Angriff an der DNA, eine hohe Anzahl sonst selten beobachteter Läsionen, nämlich abasischen Stellen und Dihydropyrimidine. Photoaktiviertes Chlorpromazin konnte in Zellen unerwarteterweise wahrscheinlich über die Reaktion von Photolyseprodukten mit einem endogenen Chromophor sonnenlichtinduzierte oxidative DNA-Modifikationen verhindern. Eine Schädigung zellfreier DNA fand nur statt, wenn der Photosensibilisator im Überschuss gegenüber den DNA-Basenpaaren vorlag, vermutlich weil ansonsten die Photolyse des Chlorpromazins durch Interkalation in die DNA verhindert wurde. Fluorchinolone zeigten eine starke Generierung von DNA-Strangbrüchen in Zellen, welche möglicherweise auf photoinduzierte Reaktionen der Arzneistoffe mit der eukaryotischen Topoisomerase zurückzuführen ist. Die Korrelation der gemessenen DNA-Schäden mit der Mikrokerninduktion führte zu der Annahme, dass besonders abasische Stellen bei der Entstehung von Mikrokernen eine Rolle spielen könnten.

Reações fotoinduzidas em alguns complexos de rênio e desenvolvimento de dispositivos moleculares

Neste trabalho foi realizado o estudo do comportamento fotoquímico e fotofísico de complexos mononucleares de rênio do tipo fac-[Re(CO)3(N N)(L)]+(N N = 1,10-fenantrolina, phen, dipirido[3,2-a:2,3-c]fenazina, dppz, L= trans-1,2bis(4-piridil)etileno, trans-bpe, trans-4-estirilpiridina. trans-stpy) e dos complexos binucleares [(CO)3(phen)Re(trans-bpe)Re(phen)(CO)3]2+, [(CO)3(phen)Re(trans-bpe)Fe(CN5]2- e [(phen)(CO)3Re(trans-bpe)Os(terpy)(bpy)]3+. O enfoque principal deste trabalho é a investigação das propriedades fotoquímicas dos complexos fac-[ Re(CO)3(phen)(trans-bpe)]+, fac-[Re(CO)3(phen)(trans-stpy)]+ fac-[Re(CO)3(dppz)(trans-bpe)+ e [(CO)3(phen)Re(trans-bpe)Re(phen)(CO)3]2+. Observou-se que os compostos em solução de acetonitrila, sob irradiação a 313, 334 ou 365 nm, apresentam variação espectral com definição de pontos isosbésticos, resultante do processo de fotoisomerização trans→cis do ligante coordenado trans-piridil etileno. Os rendimentos quânticos, Φ, da reação de fotoisomerização foram calculados com base no decaimento espectral das bandas de absorção das transições eletrônicas. Os valores médios determinados para a fotoisomeriação dos complexos em solução de CH3CN variam de 0,15 - 0,39 sob excitação a 313 nm e de 0,12 - 0,33 sob excitação a 365 nm. As reações de fotoisomerização foram monitoradas também por medidas de emissão e por RMN de 1H. Observou-se um aumento da intensidade de luminescência com o tempo de irradiação dos complexos, consistente com o estado emissivo 3MLCT dπ[(Re)→π*(α-diimina). Após irradiação, as reações de fotoisomerização dos complexos foram monitoradas por RMN de 1H. Os sinais de prótons do isômero trans tiveram um decréscimo gradual, enquanto que a intensidade dos sinais referentes aos prótons da espécie cis aumentaram. Os rendimentos quânticos para o processo de fotoisomerização dos complexos foram calculados através da integração das áreas dos sinais de prótons. Os valores obtidos foram maiores, pelo menos o dobro, que aqueles valores obtidos via espectroscopia UV-Vis. O comportamento fotoquímico dos complexos incorporados em polimetacrilato de metila, PMMA, foi também investigado. A fotólise cios complexos em filmes de PMMA conduz à variação espectral, de absorção e emissão, similar àquela observada em solução de acetonitrila, atribuícla ao processo de fotoisomerização trans → cis do ligante coordenado. Este estudo mostra que a fotoisomerização do ligante coordenado trans-piridil etileno pode ser promovida também em meio rígido. Essa característica. típica de um dispositivo molecular, pode ser convenientemente explorada no desenvolvimento de fotossensores. As medidas de TRIR mostram que o estado excitado de menor energia para o fac-[Re(CO)3(phen)(trans-bpe)+ é o 3ππ*. Para o fac-[Re(CO)3(phen)(cis-bpe)]+ a ordem dos estados excitados aparecem invertidas com o 3MLCT <3ππ*, evidenciado pela emissão do complexo cis à temperatura ambiente. Nas espécies binucleares, [(phen) Re(CO)3(trans-bpe)Os(terpy)(bpy)]3+ e [(CO)3(phen)Re(trans-bpe)Fe(CN)5]2-, a fotoisomerização trans → cis do ligante coordenado trans-bpe, característica da subunidade fac-[Re(CO)3(phen)(trans-bpe)]+, é inibida pela competição de transferência de energia intramolecular. Em meio rígido, em PMMA ou em EPA a 77 K, os máximos de emissão dos complexos fac-[Re(CO)3(phen)(cis-bpe)]+, fac-[Re(CO)3(phen)(cis-stpy)r e [(CO)3(phen)Re(cis-bpe)Re(phen)(CO)3]2+ sofrem um deslocamento hipsocrômico com o aumento da rigidez do meio. As mudanças nas propriedades emissivas, em termos de energia e tempo de vida do estado excitado, são discutidas baseadas no efeito rigidocrômico luminescente. O trabalho mostra uma forma interessante de fotos sensibilizar um substrato orgâmco usando o fato de que a coordenação estende a absorção do ligante a uma região de comprimento de onda maior e promove a fotoisomerização assistida por complexos metálicos em energias menores.

Modelling UV response of biomolecules: from electronic structure to ab-initio dynamics.

The interaction of organic chromophores with light initiates ultrafast processes in the timescale of femtoseconds. An atomistic understanding of the mechanism driving such photoinduced reactions opens up the door to exploit them for our benefit. This thesis studies the interactions of ultraviolet light with the DNA/RNA molecules and the amino-acid tryptophan. Using some of the most accurate electronic structure methods and sophisticated environmental modelling, the works documented herein enable quantitative comparisons with cutting-edge experimental data. The relaxation pathways undertaken by the excited molecule are revealed through static and dynamical investigations of the excited-state potential energy surface. The profound role played by the dynamic response of the environment to guide the excitation in these timescales is addressed thoroughly.

Photoinduced Degradation of the Herbicide Clomazone Model Reactions for Natural and Technical Systems

The photodegradation of the herbicide clomazone in the presence of S(2)O(8)(2-) or of humic substances of different origin was investigated. A value of (9.4 +/- 0.4) x 10(8) m(-1) s(-1) was measured for the bimolecular rate constant for the reaction of sulfate radicals with clomazone in flash-photolysis experiments. Steady state photolysis of peroxydisulfate, leading to the formation of the sulfate radicals, in the presence of clomazone was shown to be an efficient photodegradation method of the herbicide. This is a relevant result regarding the in situ chemical oxidation procedures involving peroxydisulfate as the oxidant. The main reaction products are 2-chlorobenzylalcohol and 2-chlorobenzaldehyde. The degradation kinetics of clomazone was also studied under steady state conditions induced by photolysis of Aldrich humic acid or a vermicompost extract (VCE). The results indicate that singlet oxygen is the main species responsible for clomazone degradation. The quantum yield of O(2)(a(1)Delta(g)) generation (lambda = 400 nm) for the VCE in D(2)O, Phi(Delta) = (1.3 +/- 0.1) x 10(-3), was determined by measuring the O(2)(a(1)Delta(g)) phosphorescence at 1270 nm. The value of the overall quenching constant of O(2)(a(1)Delta(g)) by clomazone was found to be (5.7 +/- 0.3) x 10(7) m(-1) s(-1) in D(2)O. The bimolecular rate constant for the reaction of clomazone with singlet oxygen was k(r) = (5.4 +/- 0.1) x 10(7) m(-1) s(-1), which means that the quenching process is mainly reactive.

Effect of the Addition of a Fused Donor-Acceptor Ligand on a Ru(II) Complex: Synthesis, Characterization, and Photoinduced Electron Transfer Reactions of Ru(TTF-dppz)(2)(Aqphen) (2+)

The synthesis and the photophysical properties of the complex [Ru(TTF-dppz)(2)(Aqphen)](2+) (TTF = tetrathiafulvalene, dppz = dipyrido-[3,2-a:2',3'-c]phenazine, Aqphen = anthraquinone fused to phenanthroline via a pyrazine bridge) are described. In this molecular triad excitation into the metal ligand charge transfer bands results in the creation of a long-lived charge separated state with TTF acting as electron donor and anthraquinone as terminal acceptor. The lifetime of the charge-separated state is 400 ns in dichloromethane at room temperature. A mechanism for the charge separation involving an intermediate charge-separated state is proposed based on transient absorption spectroscopy.

Intra- vs intermolecular photoinduced electron transfer reactions of a macrocyclic donor-acceptor dyad

The synthesis, structural characterization, and photophysical behavior of a 14-membered tetraazamacrocycle with pendant 4-dimethylaminobenzyl (DMAB) and 9-anthracenylmethyl groups is reported (L-3, 6-((9-anthracenylmethyl)amino)-trans-6,13-dimethyl-13-((4-dimethylaminobenzyl)amino)-1,4,8,11-tetraaza-cyclotetradecane). In its free base form, this compound displays rapid intramolecular photoinduced electron transfer (PET) quenching of the anthracene emission, with both the secondary amines and the DMAB group capable of acting as electron donors. When complexed with Zn(II), the characteristic fluorescence of the anthracene chromophore is restored as the former of these pathways is deactivated by coordination. Importantly, it is shown that the DMAB group, which remains uncoordinated and PET active, acts only very weakly to quench emission, by comparison to the behavior of a model Zn complex lacking the pendant DMAB group, [ZnL2](2+) (Chart 1). By contrast, Stern-Volmer analysis of intermolecular quenching of [ZnL2](2+) by N,N-dimethylaniline (DMA) has shown that this reaction is diffusion limited. Hence, the pivotal role of the bridge in influencing intramolecular PET is highlighted.

Photoinduced electron transfer and electronic energy transfer in naphthyl-appended cyclams

A series of novel macrocyclic tetraaza ligands that incorporate a naphthalene moiety as a photoactive chromophore have been prepared and structurally characterized as their Cu(II) complexes. Variable-temperature photophysical studies have concluded that the luminescence quenching evident in the Cu(H) complexes is due to intramolecular electronic energy transfer (EET). In their free-base forms, these ligands undergo reductive luminescence quenching via photoinduced electron transfer (PET) reactions, with proximate amine lone pairs acting as electron donors. Consequently, the emission behavior can be modulated by variations in pH and/or the presence of other Lewis acids such as Zn(H).

Applications of Photoinduced Electron Transfer Chemistry: Photoremovable Protecting Groups and Carbon Dioxide Conversion

Traditional organic chemistry has long been dominated by ground state thermal reactions. The alternative to this is excited state chemistry, which uses light to drive chemical transformations. There is considerable interest in using this clean renewable energy source due to concerns surrounding the combustion byproducts associated with the consumption of fossil fuels. The work presented in this text will focus on the use of light (both ultraviolet and visible) for the following quantitative chemical transformations: (1) the release of compounds containing carboxylic acid and alcohol functional groups and (2) the conversion of carbon dioxide into other useable chemicals. Chapters 1-3 will introduce and explore the use of photoremovable protecting groups (PPGs) for the spatiotemporal control of molecular concentrations. Two new PPGs are discussed, the 2,2,2-tribromoethoxy group for the protection of carboxylic acids and the 9-phenyl-9-tritylone group for the protection of alcohols. Fundamental interest in the factors that affect C–X bond breaking has driven the work presented in this text for the release of carboxylic acid substrates. Product analysis from the UV photolysis of 2,2,2-tribromoethyl-(2′-phenylacetate) in various solvents results in the formation of H–atom abstraction products as well as the release of phenylacetic acid. The deprotection of alcohols is realized through the use of UV or visible light photolysis of 9-phenyl-9-tritylone ethers. Central to this study is the use of photoinduced electron transfer chemistry for the generation of ion diradicals capable of undergoing bond-breaking chemistry leading to the release of the alcohol substrates. Chapters 4 and 5 will explore the use of N-heterocyclic carbenes (NHCs) as a catalyst for the photochemical reduction of carbon dioxide. Previous experiments have demonstrated that NHCs can add to CO2 to form stable zwitterionic species known as N-heterocylic-2-carboxylates (NHC–CO2). Work presented in this text illustrate that the stability of these species is highly dependent on solvent polarity, consistent with a lengthening of the imidazolium to carbon dioxide bond (CNHC–CCO2). Furthermore, these adducts interact with excited state electron donors resulting in the generation of ion diradicals capable of converting carbon dioxide into formic acid.

Fine Needle Aspiration Cytology In The Diagnosis Of Perioral Adverse Reactions To Cosmetic Dermal Fillers.

Facial cosmetic procedures are increasingly requested, and dermal filler materials have been widely used as a nonsurgical option since the 1980s. However, injectable fillers have been implicated in local adverse reactions. Therefore, the aim of this article was to describe the use of fine needle aspiration cytology (FNAC) in the diagnosis of foreign-body reactions to the perioral injection of dermal fillers. A 69-year-old woman presented with a painful nodule on her right nasolabial fold. Intraoral FNAC was performed, and cytologic smears were examined under optical and polarized light microscopy, showing birefringent microspheres, confirming the diagnosis of an adverse reaction caused by polymethyl methacrylate filler. FNAC is a less invasive method to confirm the diagnosis of adverse reactions caused by perioral cosmetic dermal fillers.

Impact Of Drug Formulation And Free Platinum/cisplatin Ratio On Hypersensitivity Reactions To Cisplatin: Formulation Matters.

Use of cisplatin can induce type I hypersensitivity reactions that may also be linked to the quality of the drug utilized. We observed cases of hypersensitivity that appeared to be associated with the brand of cisplatin used. The aim of this study was to compare two different brands of cisplatin in relation to type I hypersensitivity reactions. Brand A was used in a tertiary care teaching hospital until 2012, and use of brand B started from January 2013, when the first hypersensitivity cases were observed. Patients were categorized based on symptom. Cisplatin of both brands was analysed by high-performance liquid chromatography (HPLC) and high-resolution electrospray ionization mass spectrometry (ESI-(+)-MS) and characterized according to US Pharmacopeia. There were no cases of hypersensitivity associated with the use of cisplatin brand A, whereas four of 127 outpatients that used cisplatin brand B were affected. The two brands were in accordance with the US Pharmacopeia parameters, and there was no significant difference in the total platinum levels between the two brands when analysed by HPLC. However, high-resolution ESI-(+)-MS analyses show that brand B contains approximately 2.7 times more hydrolysed cisplatin than brand A. The increase in the hydrolysed form of cisplatin found in brand B may be the cause of the hypersensitivity reaction observed in a subset of patients. We present the first study of the quality of drugs by high-resolution ESI-(+)-MS. Drug regulatory agencies and manufacturers should consider including measurement of hydrolysed cisplatin as a quality criterion for cisplatin formulations.

Gas-phase solvolysis type reactions of SiCl3+ cations

Gas-phase SiCl3+ ions undergo sequential solvolysis type reactions with water, methanol, ammonia, methylamine and propylene. Studies carried out in a Fourier Transform mass spectrometer reveal that these reactions are facile at 10-8 Torr and give rise to substituted chlorosilyl cations. Ab initio and DFT calculations reveal that these reactions proceed by addition of the silyl cation to the oxygen or nitrogen lone pair followed by a 1,3-H migration in the transition state. These transition states are calculated to lie below the energy of the reactants. By comparison, hydrolysis of gaseous CCl3+ is calculated to involve a substantial positive energy barrier.

Electrochemical and photocatalytic reactions of polycyclic aromatic hydrocarbons investigated by raman spectroscopy

This paper presents the study of photochemical behavior of polycyclic aromatic hydrocarbons (PAHs), potential pollutants in secondary reactions in aerosols, through Raman spectroscopy compared with its electrochemical behavior. The PAHs studied include pyrene, anthracene, phenanthrene and fluorene. These were adsorbed onto TiO2 and irradiated with ultraviolet light (254 nm). Their electrochemical oxidation was studied by in situ Surface-enhanced Raman Scattering (SERS) and led to the formation of carbonyl-containing products. Oxidized intermediates bearing the C=O group were also formed during photodegradation. The joint analysis of the photodegradation data with those produced by electrochemical means - using spectroscopic techniques for the identification and characterization of the products - revealed the formation of identical products for anthracene, but not for pyrene. A reasonable explanation for this difference in results is that photochemical and electrochemical oxidation reactions proceed via different mechanisms. While photocatalytic degradation over TiO2 is initiated by hydroxyl radicals, electrochemical oxidation is initiated by the direct electron transfer from adsorbed PAH to the electrode, generating PAH cation radicals that undergo subsequent reactions.

A microscopic view of substitution reactions solvated by ionic liquids

The solvation effect of the ionic liquid 1-N-butyl-3-methylimidazolium hexafluorophosphate on nucleophilic substitution reactions of halides toward the aliphatic carbon of methyl p-nitrobenzenesulfonate (pNBS) was investigated by computer simulations. The calculations were performed by using a hybrid quantum-mechanical/molecular-mechanical (QM/MM) methodology. A semiempirical Hamiltonian was first parametrized on the basis of comparison with ab initio calculations for Cl(-) and Br(-) reaction with pNBS at gas phase. In condensed phase, free energy profiles were obtained for both reactions. The calculated reaction barriers are in agreement with experiment. The structure of species solvated by the ionic liquid was followed along the reaction progress from the reagents, through the transition state, to the final products. The simulations indicate that this substitution reaction in the ionic liquid is slower than in nonpolar molecular solvents proper to significant stabilization of the halide anion by the ionic liquid in comparison with the transition state with delocalized charge. Solute-solvent interactions in the first solvation shell contain several hydrogen bonds that are formed or broken in response to charge density variation along the reaction coordinate. The detailed structural analysis can be used to rationalize the design of new ionic liquids with tailored solvation properties. (c) 2008 American Institute of Physics.