Gill Nets of Kerala

The fishing industry the world over is passing through a critical situation.The landings of marine fishes seemed to have reached saturation in major fishing areas of the world.As a general rule fisheries employing fishing gear and techniques used by small scale and artisanal fishermen either from shore or from onboard small fishing craft come under small-scale fisheries.This study on gill nets of Kerala, the fishing method depended upon by maximum fishermen of the state focuses on the importance of this selective and low energy fishing method in the marine fishing sector of the state.The study opens with the conceptual framework by briefly reviewing the crisis in the marine fisheries sector. Maximum fishermen depend upon gill net, which is, an important selective and low energy fishing gear. A review of relevant literature on aspects such as material, selectivity and techno-economic efficiency together with scope and main objectives of the study form the major part of the compass of the introductory chapter.This survey provided the inputs for selection of centres. The chapter presents the basis for selection of sample centres, sample units and methodology for field and experimental study.The subject matter of the fourth chapter is a basic study on gear aterials. The weathering resistance, which is an important criterion to assess the material performance, was studied for polyamide monofilament in comparison to polyamide multifilament and polyethylene twisted monofilament.The study provides supporting evidence of oxidation and characteristic C-O stretching in polyethylene and cyclic lactam .formation and presence of OH in polyamide.The study indicates that small mesh gill netting can be encouraged as a selective fishing method in the inshore waters with restrained use of 30 and 32 mm mesh sizes. The economic efficiency was assessed using standard indices such as rate of return, internal rate of return, pay back period, fishery income, energy efficiency and factor productivity. The effect of size and cost of capital and cost of production on the economics of operation is also discussed in this chapter. It was observed that level of technology did not have direct effect on economic performance.

A study of the length at maturity and hooks/gill net mesh selection in Clarias lazera from Lake Chad

The minimum length at first maturity of Clarias lazera was found to be 24 cm (4.8%) for females and 20 cm (1.8%) for males. Fifty percent maturity was attained at length of 28 cm to 30 cm for both sexes; there being little difference among the sexes at this level of maturity. The modal retention lengths for gill nets were: 13 cm for 25.5 mm mesh; 18 cm for 32 mm mesh; 28 cm for 57 mm mesh; and 38 cm for 76 mm mesh. Modal lengths of Clarias lazera caught by various hooks sizes were No. 10 (28 cm); No. 11 (33 cm); Nos. 15 and 16 (28 cm). It is recommended that to protect the clarias fishery in Lake Chad, the use of gill nets of less than 57 mm mesh size and fishing hook No. 16 (and smaller sizes) which caught 43.94% of immature fishes should be discouraged

The effect of long term exploitation by the gill net fishery on the multispecies fish stocks in Kainji Lake, Nigeria, 1969-1997

The findings are presented of an assessment made of the gillnet fishery in Kainji Lake, Nigeria from 1969 to the present, on the basis of data sets from commercial and experimental gillnet fishing, with the purpose to detect trends in some key fishery monitoring indicators. During this period, there has been an increase in the number of small meshed nets in the fishery resulting in a shift in the mode to lower mesh sizes; consequently, the average mesh size declined gradually in the fishery. This trend is found to be directly correlated with the decline in the CPUE and mean weight of the fish species. It is argued that the observed trend in CPUE and mean weight is forcing the fishermen to switch effort to gears such as traps which have very small meshes and can indescriminately take all sizes of the fish. It is shown that the catch composition by weight of Citharinus citharus, Lates niloticus and tilapias declined in the gillnet fishery in the late 70's and early 80's. Recent data, from 1994 to 1996, however indicates that C. citharus is recovering, but with declining mean weight. This suggests that the exploitation pattern is shifting to the smaller fish through the use of small meshed nets. In general, however, there has not been drastic changes in species bio-diversity in the Lake as a result of predatory effect and ecosystem overfishing as has happened in other great African Lakes. The species composition since lake formation continued to be dominated by fewer that 20 species. The potential yield for the lake has been estimated to be 32,166 tonnes (excluding clupeids) and the required optimum fishing effort to be 1,814 fishing canoes. In view of the relative stability of the species diversity in the lake and the current fish production level, it is proposed here that this MSY be adopted for all species. This would be achieved with the current effort level in the lake assuming that the efficiency of the fishermen and their gears do not improve. It should be reviewed after 10 or more years of catch and effort data collection. (PDF contains 65 pages)

Some statistical aspects of the long-term gill net monitoring programme for pike Esox lucius in Windermere (English Lake District)

For more than 55 years, data have been collected on the population of pike Esox lucius in Windermere, first by the Freshwater Biological Association (FBA) and, since 1989, by the Institute of Freshwater Ecology (IFE) of the NERC Centre for Ecology and Hydrology. The aim of this article is to explore some methodological and statistical issues associated with the precision of pike gill net catches and catch-per-unit-effort (CPUE) data, further to those examined by Bagenal (1972) and especially in the light of the current deployment within the Windermere long-term sampling programme. Specifically, consideration is given to the precision of catch estimates from gill netting, including the effects of sampling different locations, the effectiveness of sampling for distinguishing between years, and the effects of changing fishing effort.

Status of the gill net fishery for the small pelagic fish species in western, south-western and southern coastal waters of Sri Lanka during 1995-1997

Small pelagic fish species are mainly caught by gill nets operated by fibre reinforced plastic boats fitted with 8-25hp out board engines, traditional crafts fitted with 8-1hp out board engines and non mechanised traditional crafts. Around 28 to 55% of the small pelagic catch in the study area consisted of trenched sardine Amblygaster sirm during 1995-1997 period. Another 26-36% of the catch composed of other Sardinella species such as Sardinella gibbosa, S. albella, S. sindensis and S. longiceps. Engraulids such as Encrasicholina heteroloba, Stolephorus insularis and Stolephorus indicus and Thryssa spp formed around 3-5% of the catch. The major component of this fishery consisted of Clupeids and Engrauhds and over 65 species ranged between smaller Engraulids to incidental rock fish, sail fish, seer fish, sharks, skates and rays. Around 1.4 to 1.9% of the catch consisted of Chirocentrus dorab, Sphyraenaspp, Scomberomorus spp, Lepturcanthus sp and Megalaspis cordyla. Around 1-11% of the catch consisted of incidentally catches of sharks, rays, skates and sail fish. Another 1.6 to 6% of the catch consisted of Selar crumenophthalamus and Rastrelliger kanagurta. The best fishing season appeared to be from June to October in the west coast and August to December in the south coast. The major components of Amblygaster sirm, Sardinella albella and Sardinella gibbosa were caught within the size ranges of 10.0-22.5 cm, 11.0-13.0 cm and 11.0-15.0 cm respectively. However, smaller sized fish of above species of sizes between 6.9 cm to 9.7 cm total length were incidentally caught in the gill nets operated for small Engraulids with a stretched mesh size of 1.6cm. The overall catch rate for the major fish landing centre at Negombo indicated an increase from 38.5 kg/boat trip during 1984-1990 period to 49.5 kg/boat trip during 1995-1997 period. The catch rate for the dominant species Amblygaster sirm has decreased from 28.17 kg/boat trip during 1983-1990 period to 17.47 kg/boat trip during 1995-1997 period at Negombo. The paper also discusses the changing overall catch rates, change in species abundance and possible management consequences that should be considered.

Column set gill net fishing in Gobindsagar reservoir

Previous authors observed the influence of temperature variations in movement of fishes and noticed better catches in bottom set nets during summer in Tungabhadra reservoir. The present account reports on similar observations in Gobindsagar reservoir.

Change in individual growth rate and its link to gill-net fishing in two sympatric whitefish species

Size-selective fishing is expected to affect traits such as individual growth rate, but the relationship between the fishery-linked selection differentials and the corresponding phenotypic changes is not well understood. We analysed a 25-year monitoring survey of sympatric populations of the two Alpine whitefish Coregonus albellus and C. fatioi. We determined the fishing-induced selection differentials on growth rates, the actual change of growth rates over time, and potential indicators of reproductive strategies that may change over time. We found marked declines in adult growth rate and significant selection differentials that may partly explain the observed declines. However, when comparing the two sympatric species, the selection differentials on adult growth were stronger in C. albellus while the decline in adult growth rate seemed more pronounced in C. fatioi. Moreover, the selection differential on juvenile growth was significant in C. albellus but not in C. fatioi, while a significant reduction in juvenile growth over the last 25 years was only found in C. fatioi. Our results suggest that size-selective fishing affects the genetics for individual growth in these whitefish, and that the link between selection differentials and phenotypic changes is influenced by species-specific factors.

Amazon fisheries. I. - Variations in the relative abundance of tambaqui ( Colossoma macropomum Cuvier, 1818) based on catch and effort data of the gill-net fisheries.

Adjusted mean catches which are calculated discounting the effect of average fishing effort increase the further the lake is from Manaus, Brazil. -from Author

Gill net and longlines fisheries in Cyclades waters (Aegean Sea): species composition and gear competition

Species composition and gear competition for the small-scale fisheries in the Cyclades waters (off Naxos Island, Aegean Sea. Hellas) was studied based on samples collected during 1997-1998 with gill nets of different mesh sizes and longlines with hooks of different sizes. Comparisons used univariate and multivariate techniques based on species compositions by number and weight and the commercial/total catch ratio in terms of weight and number. The results of the various techniques were in agreement and suggested that the different gear/size/season combinations fall into two groups (all gill nets and all longlines), which differed from each other in terms of species composition. species diversity and dominance. In contrast, the commercial/total catch ratio did not differ either within and between gears. The implications of the results for the management of the Mediterranean fisheries resources are also discussed. (C) 2002 Elsevier Science B.V. All rights reserved.

Computer simulation of H and He effects in fusion reactor materials

Fusion power is an appealing source of clean and abundant energy. The radiation resistance of reactor materials is one of the greatest obstacles on the path towards commercial fusion power. These materials are subject to a harsh radiation environment, and cannot fail mechanically or contaminate the fusion plasma. Moreover, for a power plant to be economically viable, the reactor materials must withstand long operation times, with little maintenance. The fusion reactor materials will contain hydrogen and helium, due to deposition from the plasma and nuclear reactions because of energetic neutron irradiation. The first wall divertor materials, carbon and tungsten in existing and planned test reactors, will be subject to intense bombardment of low energy deuterium and helium, which erodes and modifies the surface. All reactor materials, including the structural steel, will suffer irradiation of high energy neutrons, causing displacement cascade damage. Molecular dynamics simulation is a valuable tool for studying irradiation phenomena, such as surface bombardment and the onset of primary damage due to displacement cascades. The governing mechanisms are on the atomic level, and hence not easily studied experimentally. In order to model materials, interatomic potentials are needed to describe the interaction between the atoms. In this thesis, new interatomic potentials were developed for the tungsten-carbon-hydrogen system and for iron-helium and chromium-helium. Thus, the study of previously inaccessible systems was made possible, in particular the effect of H and He on radiation damage. The potentials were based on experimental and ab initio data from the literature, as well as density-functional theory calculations performed in this work. As a model for ferritic steel, iron-chromium with 10% Cr was studied. The difference between Fe and FeCr was shown to be negligible for threshold displacement energies. The properties of small He and He-vacancy clusters in Fe and FeCr were also investigated. The clusters were found to be more mobile and dissociate more rapidly than previously assumed, and the effect of Cr was small. The primary damage formed by displacement cascades was found to be heavily influenced by the presence of He, both in FeCr and W. Many important issues with fusion reactor materials remain poorly understood, and will require a huge effort by the international community. The development of potential models for new materials and the simulations performed in this thesis reveal many interesting features, but also serve as a platform for further studies.

Histopathological changes in gill, kidney and liver of an estuarine mullet, Liza parsia, induced by sublethal exposure to DDT

Liza parsia were exposed to sublethal (0.02 ppm) concentration of DDT for 15 days. The gill responded initially with copious secretion of mucus, oedematous separation of epithelial cells from the basement membrane and fusion of secondary gill lamellae. Hyperplasia of the cells lining primary gill lamellae and lamellar telangiectases (or aneurysms) was frequently seen after day 10 of exposure. Kidney exhibited hypertrophy of the epithelial cells lining proximal convoluted tubules which was followed by shrinkage in glomerular tufts, increase in Bowman's space, appearance of amorphous eosinophilic materials in the lumina of the tubules and focal necrosis on day 10 of the treatment. Hyaline droplets and casts were also encountered in the epithelial cells and lumina of the proximal tubules. Liver revealed an initial dilation of canaliculi and increased secretion of bile. Thereafter, the displacement of nuclei towards periphery of the hepatocytes, disorganization of blood sinusoids, pyknotic changes in nuclei, cytolysis and vacuolation as well as focal necrosis were noticed after day 10 of the intoxication.

INVESTIGATION OF BUBBLE DYNAMICS AND HEATING DURING FOCUSED ULTRASOUND INSONATION IN TISSUE-MIMICKING MATERIALS

The deposition of ultrasonic energy in tissue can cause tissue damage due to local heating. For pressures above a critical threshold, cavitation will occur in tissue and bubbles will be created. These oscillating bubbles can induce a much larger thermal energy deposition in the local region. Traditionally, clinicians and researchers have not exploited this bubble-enhanced heating since cavitation behavior is erratic and very difficult to control. The present work is an attempt to control and utilize this bubble-enhanced heating. First, by applying appropriate bubble dynamic models, limits on the asymptotic bubble size distribution are obtained for different driving pressures at 1 MHz. The size distributions are bounded by two thresholds: the bubble shape instability threshold and the rectified diffusion threshold. The growth rate of bubbles in this region is also given, and the resulting time evolution of the heating in a given insonation scenario is modeled. In addition, some experimental results have been obtained to investigate the bubble-enhanced heating in an agar and graphite based tissue- mimicking material. Heating as a function of dissolved gas concentrations in the tissue phantom is investigated. Bubble-based contrast agents are introduced to investigate the effect on the bubble-enhanced heating, and to control the initial bubble size distribution. The mechanisms of cavitation-related bubble heating are investigated, and a heating model is established using our understanding of the bubble dynamics. By fitting appropriate bubble densities in the ultrasound field, the peak temperature changes are simulated. The results for required bubble density are given. Finally, a simple bubbly liquid model is presented to estimate the shielding effects which may be important even for low void fraction during high intensity focused ultrasound (HIFU) treatment.

Computational modeling of defects in nanoscale device materials

This PhD thesis concerns the computational modeling of the electronic and atomic structure of point defects in technologically relevant materials. Identifying the atomistic origin of defects observed in the electrical characteristics of electronic devices has been a long-term goal of first-principles methods. First principles simulations are performed in this thesis, consisting of density functional theory (DFT) supplemented with many body perturbation theory (MBPT) methods, of native defects in bulk and slab models of In0.53Ga0.47As. The latter consist of (100) - oriented surfaces passivated with A12O3. Our results indicate that the experimentally extracted midgap interface state density (Dit) peaks are not the result of defects directly at the semiconductor/oxide interface, but originate from defects in a more bulk-like chemical environment. This conclusion is reached by considering the energy of charge transition levels for defects at the interface as a function of distance from the oxide. Our work provides insight into the types of defects responsible for the observed departure from ideal electrical behaviour in III-V metal-oxidesemiconductor (MOS) capacitors. In addition, the formation energetics and electron scattering properties of point defects in carbon nanotubes (CNTs) are studied using DFT in conjunction with Green’s function based techniques. The latter are applied to evaluate the low-temperature, low-bias Landauer conductance spectrum from which mesoscopic transport properties such as the elastic mean free path and localization length of technologically relevant CNT sizes can be estimated from computationally tractable CNT models. Our calculations show that at CNT diameters pertinent to interconnect applications, the 555777 divacancy defect results in increased scattering and hence higher electrical resistance for electron transport near the Fermi level.