Molecular motion in miscible polymer blends .1. Motion in blends of PEO and PVPh studied by solid-state C-13 T-1 rho measurements

Changes in molecular motion in blends of PEO-PVPh have been studied using measurements of C-13 T-1 rho relaxation times. C-13 T-1 rho relaxation has been confirmed as arising from spin-lattice interactions by observation of the variation in T-1 rho with rf field strength and temperature. In the pure homopolymers a minimum in T-1 rho is observed at ca. 50 K above the glass transition temperatures detected by DSC. After blending, the temperature of the minimum in T-1 rho for PEO increased, while that for PVPh decreased, however, the minima, which correspond to the temperatures where the average correlation times for reorientation are close to 3.1 mu s, are separated by 45 K (in a 45% PEO-PVPh blend). These phenomena are explained in terms of the local nature of T-1 rho measurements. The motions of the individual homopolymer chains are only partially coupled in the blend. A short T-1 rho has been observed for protonated aromatic carbons, and assigned to phenyl rings undergoing large-angle oscillatory motion, The effects of blending, and temperature, on the proportion of rings undergoing oscillatory motion are analyzed.

PHB-PEO electrospun fiber membranes containing chlorhexidine for drug delivery applications

Fiber meshes of poly(hydroxybutyrate) (PHB) and poly(hydroxybutyrate)/ poly(ethylene oxide) (PHB/PEO) with different concentrations of chlorhexidine (CHX) were prepared by electrospinning, for assessment as a polymer based drug delivery system. The electrospun fibers were characterized at morphological, molecular and mechanical levels. The bactericidal potential of PHB and PHB/PEO electrospun fibers with and without CHX was investigated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by disk diffusion susceptibility tests. Electrospun fibers containing CHX exhibited bactericidal activity. PHB/PEO-1%CHX displayed higher CHX release levels and equivalent antibacterial activity when compared to PHB/PEO with 5 and 10 wt% CHX. Bactericidal performance of samples with 1 wt% CHX was assessed by Colony Forming Units (CFU), where a reduction of 100 % and 99.69 % against E. coli and S. aureus were achieved, respectively.

Procedimiento estandarizado de operación: Método de determinación del consumo de oxígeno en invertebrados acuáticos (PEO-IMP-CO-001)

Expone el procedimiento estándar de operación (PEO) para el método de determinación del consumo de oxígeno de invertebrados acuáticos, aplicable por los analistas de la Línea de Investigación en Ecotoxicología Acuática (LIEA). Describe el equipamiento, materiales necesarios, procedimientos de campo y laboratorio, y análisis e interpretación de los datos.

Procedimiento estandarizado de operación: Método de determinación de la tasa de ingestión de organismos filtradores (PEO-IMP-TI-001)

Presenta el procedimiento estándar de operación (PEO) para el método de determinación de la tasa de ingestión de organismos acuáticos filtradores. Describe el equipamiento, materiales necesarios, procedimientos de campo y laboratorio y análisis e interpretación de los datos.

Síntese e caracterização dos nanocompósitos K0,1(PEO)xMoS2 (X= 0,5; 1,2)

The reaction of an aqueous solution of poly(ethylene oxide) (peo - mw 100.000) with a neutral aqueous suspension of single layers of MoS2 was studied. The single layers aqueous suspension was prepared by first intercalating lithium (using n-Butyllithium in n-hexane) and reaction of these ternary compound with water under ultrasound stirring. The suspension was washed several times with water until neutral pH. The suspension was mixed with the PEO aqueous solution in the presence of KCl. Two single phase compounds were obtained with the expansion of 4,8 and 9,0Å, attributed to the solvation of the intercalated potassium cations with mono and double layers, respectively.

Fractionated crystallization and fractionated melting of confined PEO microdomains in PB-b-PEO and PE-b-PEO diblock copolymers

The confined crystallization of poly(ethylene oxide) (PEO) in predominantly spherical microdomains formed by several diblock copolymers was studied and compared. Two polybutadiene-b-poly(ethylene oxide) diblock copolymers were prepared by sequential anionic polymerization (with approximately 90 and 80 wt % polybutadiene (PB)). These were compared to equivalent samples after catalytic hydrogenation that produced double crystalline polyethylene-b-poly(ethylene oxide) diblock copolymers. Both systems are segregated into microdomains as indicated by small-angle X-ray scattering (SAXS) experiments performed in the melt and at lower temperatures. However, the PB-b-PEO systems exhibited a higher degree of order in the melt. A predominantly spherical morphology of PEO in a PB or a PE matrix was observed by both SAXS and transmission electron microscopy, although a possibly mixed morphology (spheres and cylinders) was formed when the PEO composition was close to the cylinder-sphere domain transitional composition as indicated by SAXS. Differential scanning calorimetry experiments showed that a fractionated crystallization process for the PEO occurred in all samples, indicating that the PE cannot nucleate PEO in these diblock copolymers. A novel result was the observation of a subsequent fractionated melting that reflected the crystallization process. Sequential isothermal crystallization experiments allowed us to thermally separate at least three different crystallization and melting peaks for the PEO microdomains. The lowest melting point fraction was the most important in terms of quantity and corresponded to the crystallization of isolated PEO spheres (or cylinders) that were either superficially or homogeneously nucleated. This was confirmed by Avrami index values of approximately 1. The isothermal crystallization results indicate that the PE matrix restricts the crystallization of the covalently bonded PEO to a higher degree compared to PB.

Structural analysis of PEO-PBO copolymer monolayers at the air-water interface

X-ray reflectivity (XR) and grazing incidence X-ray diffraction (GIXD) have been used to examine an oxyethylene-b-oxybutylene (E23B8) copolymer film at the air-water interface. The XR data were fitted using both a one- and a two-layer model that outputted the film thickness, roughness, and electron density. The best fit to the experimental data was obtained using a two-layer model (representing the oxyethylene and oxybutylene blocks, respectively), which showed a rapid thickening of the copolymer film at pressures above 7 mN/m. The large roughness values found indicate a significant degree of intermixing between the blocks and back up the GIXD data, which showed no long range lateral ordering within the layer. It was found from the electron density model results that there is a large film densification at 7 mN/m, possibly suggesting conformational changes within the film, even though no such change occurs on the pressure-area isotherm at the same surface pressure.

Self-assembly of telechelic tyrosine end-capped PEO and poly(alanine) polymers in aqueous solution

The self-assembly in aqueous solution of three novel telechelic conjugates comprising a central hydrophilic polymer and short (trimeric or pentameric) tyrosine end-caps has been investigated. Two of the conjugates have a central poly(oxyethylene) (polyethylene oxide, PEO) central block with different molar masses. The other conjugate has a central poly(l-alanine) (PAla) sequence in a purely amino-acid based conjugate. All three conjugates self-assemble into β-sheet based fibrillar structures, although the fibrillar morphology revealed by cryogenic-TEM is distinct for the three polymers—in particular the Tyr5-PEO6k-Tyr5 forms a population of short straight fibrils in contrast to the more diffuse fibril aggregates observed for Tyr5-PEO2k-Tyr5 and Tyr3-PAla-Tyr3. Hydrogel formation was not observed for these samples (in contrast to prior work on related systems) up to quite high concentrations, showing that it is possible to prepare solutions of peptide–polymer-peptide conjugates with hydrophobic end-caps without conformational constraints associated with hydrogelation. The Tyr5-PEO6k-Tyr5 shows significant PEO crystallization upon drying in contrast to the Tyr5-PEO2k-Tyr5 conjugate. Our findings point to the remarkable ability of short hydrophobic peptide end groups to modulate the self-assembly properties of polymers in solution in model peptide-capped “associative polymers”. Retention of fluidity at high conjugate concentration may be valuable in potential future applications of these conjugates as bioresponsive or biocompatible materials, for example exploiting the enzyme-responsiveness of the tyrosine end-groups

Rádio peão: estudo dos mecanismos, tipologia e os efeitos dos rumores nas organizações

Esta dissertação tem como tema o estudo da rádio peão, equivalente brasileiro da grapevine americana e dos rumores e boatos que circulam nas organizações. O trabalho contém a revisão da teoria existente sobre o assunto, abrangendo seus principais mecanismos de . surgimento e transformação, a tipologia, e classificação dos rumores, segundo seus aspectos sociais e psicológicos. Também analisa as diversas metodologias de pesquisa do assunto. Ao final são feitas algumas recomendações para as empresas e sugeridos alguns temas para aprofundamento futuro do assunto.

O peão e o acidente de trabalho na construção civil do Rio de Janeiro: elementos para uma avaliação do papel da educação nas classes trabalhadoras

This dissertation seeks to identify specifications bu which the Subsection cf Buildings c f the Civil Construction os Rio de Janeiro could be improved. It attempt to determine the factors that make construction workers both victims of accidents, as well as the cause of these accidents. It a150 seeks t o identify the means af the capitalist way that as the producer specific kind af society, creates this type af invisible of a worker. Further more, to verify the violent ar disguised ways, that lead the worker to have a guilty consclence relative to himself and to the other workers , and maklng him feel responsible even for accident - related deaths on the job. A revolting factor is that malnutrition and endemic hunger, are in large part responsible for accidents at work in the capitalist production system, ln which production relations are still primitive. Therefore, the accidents at work are a product of society, especially caused by conditions in the construction sector . This fac 19 often masked, and responsibility is put on the worker ln 77,5~ of work related accident . Under these specific working conditions the cumulative overtime hours of work and tasks make the rythm and working hours extreme and overburdensome. The large and modern firms subcantract to smoller construc~i ns firms who have more dangeraus working condictions which result in more frequent and mayor accidents. These are not computed in the statistics of the large firms and the workers of the subcontractors do not appear on the builging construction lists, and are therefore a non - existent entities. Even opressed, the workers still continue to work under these conditions mak1ng there resistence a form af struggle. The Education that intends to be transformed in to an instrument of the workers struggle, should stimulated the participation in the daily educational and political practices and try to reconstructed what the dominant knowledge has fragmented: the ptoduction of existence as an integrated whole.

Hidrogenação catalítica de olefinas e dienos a partir de complexos catiônicos de ródio no sistema de fases formado por N-heptano/PEO 3350 + metanol

Este trabalho descreve a utilização do sistema n-heptano / PEO 3350 + metanol na hidrogenação catalítica de olefinas e dienos por complexos de ródio. Nos primeiros estudos na hidrogenação do 1-hexeno sob fluxo, temperatura ambiente e com o complexo [(η5-Cp*)2Rh2(μ2- Cl)3]PF6, observaram-se problemas difusionais de hidrogênio no meio reacional, os quais foram resolvidos com modificações na geometria do reator e difusor de hidrogênio. Sob condição de fluxo otimizada e temperatura ambiente, observou-se um efeito na reatividade das olefinas relacionado ao tamanho da cadeia carbônica, na seguinte ordem: 1-hexeno > 1-octeno >> 1- deceno, o qual pode ser expresso, tomando a reatividade do 1-hexeno como padrão, como (1:0,3:0,03). Todas as reações (23 corridas) foram realizadas utilizando a mesma fase catalítica polar (PEO 3350 + MeOH + complexo de ródio), mostrando que o sistema é muito efetivo para catálise homogênea. Por outro lado, os dienos não foram hidrogenados sob condição de fluxo, requerendo altas pressões de hidrogênio (> 20 bar), tipicamente 40 bar. Sob as condições otimizadas (40 bar de H2 e temperatura ambiente), foi obtida uma FR da ordem de 5000 h-1. Durante os estudos da hidrogenação dos dienos, foi observado um aumento na atividade catalítica ao longo das reciclagens. Também foi verificado que a atividade catalítica aumentava quando a cor da solução passava de laranja para marrom, bege e incolor. Com o objetivo de isolar algum complexo de ródio de alguma dessas etapas (cores), foram realizados experimentos sob condições típicas de pressão de H2 (40 bar) e tempo (2 horas) sem substrato, com e sem PEO. Em ambos os casos, após 7 reciclagens a cor final da solução foi marrom. Assim, o substrato parece ser essencial para a coloração final da solução reacional, a qual é a forma mais ativa do catalisador. Nos experimentos realizados sem PEO foi possível isolar o complexo catiônico de ródio [(η5- Cp*)Rh(MeOH)3](PF6)2, o qual foi caracterizado por IV, 1H-RMN, C, H, N e UV / vis. Esse complexo também foi formado na presença de PEO. (Continua). Considerando os altos valores de FR, alguns testes cinéticos (perfil de consumo de substrato, envenenamento por CS2 e reatividade frente ao benzeno), espalhamento de luz e microscopia eletrônica de transmissão foram realizados a fim de elucidar a natureza física do catalisador como molecular ou coloidal. Todos os testes evidenciaram um processo catalítico molecular.

Optical and structural properties of PEO-like plasma polymers

This paper deals with the study of optical, structural and biocompatible properties of PEO-like plasma polymerized films resulting from RF excited diethylene glycol dimethyl ether (CH3O(CH2CH2O)(2)CH3 diglyme) glow discharges. The study was carried out using visible-ultraviolet and FTIR spectroscopies and contact angle measurements. FTIR spectra of plasma polymerized diglyme showed a stronger presence of ethylene glycol groups in film structure for lower RF power levels. The contact angle measurements for water revealed an increasing from 30degrees to 62,5degrees when the RF power was varied from 2 to 45 W, indicating the decreasing of the hydrophilic character of diglyme films with the increasing of RF power. This trend is in agreement with FTIR results. The data from visible-ultraviolet reflectance and transmittance spectra revealed alterations on optical properties of plasma polymerized diglyme films. The film's optical gap varied from 3.8 to 3 eV for RF power running from 5 to 45 W.

Montmorillonite (MMT) effect on the structure of poly(oxyethylene) (PEO)-MMT nanocomposites and silica-PEO-MMT hybrid materials

In this work we report the effects of incorporation of variable amounts (0.5-25%w/w) of montmorillonite in poly(oxyethylene) based materials in order to decrease the polymer crystallinity. Two different classes of materials were studied: silica-poly(oxyethylene)-montmorillonite hybrids prepared by the sol-gel route and poly(oxyethylene)-montmorillonite nanocomposites prepared by mixing the dry clay or the clay aqueous suspension into the melt poly(oxyethylene). The effects of monternorillonite loading on the poly(oxyethylene) crystallization control and on the nanostructural features were investigated by X-ray powder diffraction, small-angle X-ray scattering and differential scanning calorimetry. Experimental results show that free montmorillonite layers coexist with open aggregates and tactoids in the poly(oxyethylene)-montmorillonite nanocomposites, with different features depending on the filler proportion and preparation route. The intercalation of polymer chains in montmorillonite galleries markedly hinders the crystallization of the poly(oxyethylene) matrix. For hybrids materials the silica phase favors the exfoliation of montmorillonite tactoids, so that samples are predominantly constituted by dispersed platelets. (c) 2006 Elsevier B.V. All rights reserved.