糯小麦杂交后代的基因型鉴定及Wx基因的效应研究

糯小麦在食品加工业、淀粉加工业及其它工业上有着重要用途，是近年来许多国家小麦研究的重要课题。国外糯小麦选育尚未突破高产与糯性相结合的难点，国内目前还没有培育出高蛋白强筋型的糯小麦品种，这在一定程度上与缺乏合适的育种方法和高效、实用的糯小麦分子标记辅助育种技术有关。国内外对Wx基因效应的研究主要利用缺体－四体系、重组自交系或近等基因系，还未见有利用遗传背景相同的BC5F2代回交改良群体的报道。 糯性位点近等基因系是小麦淀粉品质育种的重要材料，而我国目前还没有一套中国栽培小麦遗传背景的糯性位点近等基因系。为了选育部分糯小麦、全糯小麦和中国栽培小麦遗传背景的糯性位点近等基因系，我们利用Wx蛋白电泳和高效实用的分子标记技术体系来鉴定糯小麦杂交后代的基因型，结果证明该体系能有效地用于糯小麦的分子标记辅助育种。以中国春糯性位点全套近等基因系为研究材料，对小麦Wx基因的6个STS标记和1个CAPS标记进行了筛选，改良PCR扩增条件以及产物检测方式后，从这些标记中筛选出3个标记，包括鉴定Wx-A1、Wx-D1位点的2个共显性STS标记和Wx-B1位点的1个显性STS标记。利用上述3个分子标记从BC5F2 代回交改良群体中筛选出了8种Wx基因型，经卡方检验，其分离比符合3对基因的分离比例，其中基因型为aabbdd的植株有2株，直链淀粉含量分别为1.81%和0.82%，为全糯小麦；基因型为AAbbdd，aabbDD的部分糯性植株各有1株，直链淀粉含量分别为15.24%和17.57%。以上4株植株的农艺性状和品质性状接近回交亲本“川育12”，并明显优于全糯材料“98Y1441”，表明采用回交法与Wx基因分子标记辅助选择相结合，有助于培育高产、优质的全糯和部分糯小麦。同时，本研究中建立的分子标记技术体系，也为选育具有中国栽培小麦遗传背景的糯性位点近等基因系奠定了基础。 在基因型鉴定的基础上，利用糯小麦杂交后代BC5F2代回交改良群体研究了各基因缺失降低直链淀粉含量的效果和各基因合成直链淀粉的能力，以及直链淀粉含量与农艺性状、品质性状、淀粉糊化特性等的相关性。缺失不同Wx基因的8种基因型，直链淀粉含量差异显著。研究单缺失基因型发现，减少效应最大的是Wx-B1b基因，Wx-B1b和Wx-D1b基因没有显著差异，减少效应最小的是Wx-A1b基因。研究双缺失基因型发现，Wx基因合成直链淀粉的能力，Wx-B1a基因最高，Wx-A1a基因最低，而Wx-B1a和Wx-D1a基因差异很小；直链淀粉含量与株高、穗长、小穗数、穗粒数、千粒重等农艺性状相关不显著，表明淀粉品质育种可以与高产育种实现有机结合；直链淀粉含量与SDS-沉降值呈显著负相关(r=-0.726)，说明直链淀粉含量降低在一定程度上有利于提高小麦营养与加工品质，这一结果至今未见有文献报道；全糯类型的淀粉糊化特性与其他类型显著不同，具有最高的峰值粘度和稀懈值，最低的低谷粘度、最终粘度、反弹值、峰值时间、糊化温度、起始糊化温度，表明糯小麦淀粉在食品和工业上具有特殊用途；稀懈值与直链淀粉含量呈极显著负相关(r=-0.969)，其他粘度参数与直链淀粉含量呈显著正相关(最终粘度r=0.797，低谷粘度r=0.910、反弹值r=0.954、峰值时间r=0.970、糊化温度r=0.962、起始糊化温度r=0.932)。以上结论可为糯小麦品种选育和淀粉品质改良提供理论依据。 Waxy wheat is very important in food processing industry, starch processing industry and the other industries, so it is a focus of wheat research in many countries these years. Foreign wheat breeders have not conquered the difficulty of high yield combined with waxy character, and there is no waxy wheat variety with high protein and strong gluten in China at present，all of which were caused by lacking proper breeding methods and effective, applied molecular markers-assisted selection technique at a certain extent. Until now, research about the effect of waxy genes mainly depended on nullisomic-tetrasomic lines, recombinant lines or near-isogenic lines, and it is lacking the reports of using improved BC5F2 backcross progenies under the common genetic background. Near-isogenic lines at the Wx loci are important materials for wheat starch quality breeding. However, there are no such lines under the Chinese cultivated wheat genetic background. To develop partial waxy wheats, waxy wheats and near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background, we use SDS-PAGE of waxy proteins and effective, applied molecular marker-assisted selection technical system to identify the genotype of waxy wheat’s progenies. The results indicated that such a system is applicable in waxy wheat’s molecular marker-assisted selection effectively. A series of Chinese Spring Wx loci near-isogenic lines were used to identify the specific bands of six STS markers and one CAPS marker of Wx genes. After optimizing PCR amplification and separating of PCR products, three co-dominant and dominant STS-markers were identified at the Wx-A1, Wx-D1 and Wx-B1 loci, respectively, which were used to identify the genotype of waxy wheat’s progenies. Eight Wx genotypes were developed from the improved BC5F2 backcross progenies, which follows Mendelian segregation. Among them, there were two aabbdd waxy plants whose amylose content in the BC5F3 seeds were 1.81% and 0.82%, respectively. In addition, there were partial waxy plants (AAbbdd and aabbDD) whose amylose content in the BC5F3 seeds were 15.24 % and 17.57%, respectively. Most agronomic and quality traits of these four plants resembled those of the recurrent parent “Chuanyu 12”, and superior to waxy wheat parent “98Y1441”. This shows that backcross approach in combination with molecular marker-assisted selection of waxy genes is helpful to develop partial and full waxy wheat with good traits in the waxy wheat breeding program. At the same time, molecular marker-assisted selection technical system in this paper, also establish the base for breeding the near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background. According to the results of genotype identification, we use waxy wheat’s improved BC5F2 backcross progenies to verify the effects of null alleles on reducing amylose content and determine the amylose synthesis capacity of each Wx gene independently, and investigate the relativity among amylose content with agonomic traits, quality traits, starch pasting properties respectively. There was significant difference in amylose content of the eight genotypes carrying different null Wx alleles. The reducing effect of the single null alleles was the most significant in Wx-B1b, followed by Wx-D1b and Wx-A1b, and there was no significant difference between Wx-B1b and Wx-D1b. The results of the double null lines further demonstrated that for the capacity of amylose synthesis, Wx-B1a was the highest, followed by Wx-D1a and Wx-A1a, and there was no significant difference between Wx-B1a and Wx-D1a. Amylose contents of the eight genotypes were not significantly correlated with plant height, spike length, spikelets per spike, grains per spike, 1000-grain weight, which showed that starch quality breeding could integrate with high yield breeding. Amylose contents of the eight genotypes were negatively significantly correlated with SDS-sedimentation value(r=-0.726), which suggested that reduction in amylose content is propitious to improve quality at a certain extent. Starch pasting properties of the full waxy type was significantly different from the other seven types, with the highest peak viscosity and breakdown, and lowest valley viscosity, final viscosity, setback, peak time, pasting temperature and starting pasting temperature. It indicated that waxy wheat starch has special use in food and industry. Breakdown was negatively significantly correlated with amylose contents (r=-0.969), and the other parameters were positively significantly correlated with amylose contents (r=0.797 for final viscosity, r=0.910 for trough viscosity, r =0.954 for setback, r =0.970 for peak time, r=0.962 for pasting temperature and r=0.932 for starting pasting temperature ). The results of the study are very useful for waxy wheat variety breeding and starch quality improvement.

青藏高原青稞淀粉资源的评价

青稞（Hordeum vulgare L.var．nudum Hook．f.），即裸大麦，是兼食用、饲用和酿造于一体的作物，有着重要的利用价值。淀粉是青稞籽粒中含量最多、最重要的碳水化合物，淀粉含量、直支淀粉比将会直接影响淀粉的功能特性，进而影响淀粉的应用领域。我国青藏高原青稞的栽培和食用历史悠久，特色青稞资源极其丰富。目前关于青藏高原青稞淀粉特性的报道还不多见，筛选和培育特色淀粉青稞利于拓展青稞的应用领域, 从而提高其经济价值。 本研究以114份青藏高原青稞品种(系)为实验材料，通过SDS-PAGE对材料的胚乳淀粉颗粒结合蛋白（SGAPs）进行分离，确定各蛋白的分子量大小、组合类型和多态性等。然后按照国标法测试材料的籽粒总淀粉含量和直链淀粉含量，通过微型糊化粘度仪分析相应的淀粉糊化特性，最后使用显微镜观察比较了青稞的淀粉颗粒形态特征。主要结果如下： 1、114种青稞中共分离出20种不同的SGAP条带，条带分子量为35.00～112.39 KDa，分布频率为12.28～97.37%。材料含有的SGAPs条带数从10到14不等，超过一半的材料含11种SGAP条带。20种条带形成16种组合类型，其中西藏地区青稞包含所有16个组合类型，四川地区青稞包含其中12个组合类型。青藏高原青稞籽粒淀粉颗粒结合蛋白的差异很大，遗传多样性丰富。 2、114份青稞的总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度的变幅分别为51.26～66.70%、14.64～29.74%、0.17～0.42、194～1135BU、58.8～65.2℃和81.4～92.4℃，相应的平均值分别为59.82%、23.60%、0.31、722.30BU、62.1℃和88.8℃。群体在总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度上的分布具有明显的正态性；所有胚乳淀粉体的淀粉粒都呈复粒结构。对西藏和四川的材料进行了分组比较， 两地区的青稞在直链淀粉含量和直支淀粉比上的差异达到显著水平。 3、筛选出18份具有特殊淀粉特性的青稞品种，其中5份材料的总淀粉含量超过65%，包括NB63-1、NB67、甘孜白六棱、98221-1和NB63；3份材料的直链淀粉含量大于29%，包括藏青85、藏青3号和喜马拉6号；8份材料的直支淀粉比小于0.25，包括99033-6、春青稞、阿坝330、Jan-03、米麦114、396、NB63-1和92013；7份材料的糊化温度低于60℃，同时材料的峰值粘度大于1000BU,并且峰值温度低于90℃，包括足捉春、Jan-03、阿坝330、米麦114、春青稞、20003和阿青5号。 4、各淀粉特性间存在高度相关性。直链淀粉含量和直支淀粉比与糊化温度成极显著正相关，与峰值粘度成极显著负相关，与A型淀粉粒数量和大小呈负相关。不同SGAPs组合的品种之间，淀粉含量和淀粉糊化特性间差异均达显著水平。SGAP2、SGAP5、SGAP6和SGAP7可能对籽粒直链淀粉含量、直支淀粉比和糊化温度有正向效应；SGAP3、SGAP9∼SGAP20可能对峰值粘度有正向效应。 本研究对青藏高原青稞淀粉资源进行了较为全面的评价，对该区青稞淀粉特性有了系统的认识。研究筛选出的特殊青稞品种可作为青稞育种和青稞淀粉工业应用的潜在资源，淀粉特性差异巨大的众多青稞品种也为拓宽青稞应用领域提供了丰富的资源保障。本研究对部分SGAPs在性质上的鉴定和功能上的初步推断为青稞材料的筛选提供了指导，也为品质育种提供了理论参考。 Hulless barley (naked barley, Hordeum vulgare L.) is a short- season, early maturing crop with a wide range of adaptation. It has been attracting more and more attention due to its superior nutrition and extensive industrial applications. Starch is the main ingredient in hulless barley seeds which makes up 65 percent of hulless barley’s dry weight. The ratio of the amylose/amylopectin and the size, shape, distribution of starch granules can affect the physico-chemical and functional properties of starch, which may turn affect its utilizations. The Qinghai-Tibet Plateau, which is located in southwestern China, is a typical area of vertical agricultural ecosystem and one of the barley origin centers with abundant hulless barley resources. There are little reports about hulless barley in Qinghai-Tibet Plateau at present. To screen and cultivate some characteristic hulless barley can improve its value. An improved SDS-PAGE was used to identify SGAPs combination of 114 hulless barley varieties. Starch content (total starch and amylose starch) was determined according to the standard methods GB5006-85 and GB/T 15683 using PerkinElmer M341 Precision Automatic Polarimeter and UV spectrophotometer 755B respectively. The pasting properties were measured by BRABENDER Micrio Visco-Amylo- Graph 803201. The morphology of starch granules were observed and compared with Axioplan 2 Imaging light microscopy. The following were the results obtained: 1. There were 20 major SGAPs presented in 114 varieties, with the molecular weight ranged from 35.00 to 112.39 KDa, and the frequencies ranged from 12.28% to 97.37%. The number of SGAP bands in each accession varied from 10 to 14, more than half of the population had 11 bands. There were 16 distinct SGAP patterns in the 114 varieties, the Tibet hulless barley had all of the 16 types and the Sichuan hulless barley had 12 types. The results indicated the Qinghai-Tibet Plateau hulless barley had a polymorphism of the SGAPs. 2. The ranges of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature of the 114 hulless barley were 51.26～66.70%,14.64～29.74%,0.17～0.42,194～1135BU,58.8～65.2 and 81.4℃～92.4, with an average of ℃59.82%, 23.60%, 0.31, 722.30BU, 62.1 and 88.8,℃℃ respectively. The distributions of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature were visibly normal school. All of the amyloplasts in endosperm of varieties showed bimodal size distributions.The main starch properties of hulless barley from Tibet and Sichuan were separated and compared, the differences on amylose content and Am/Ap were obvious. 3. Eighteen accessions which had special starch properties were screened out. Five accessions with total starch content beyond 65%, including NB63-1, NB67, Ganzibailiuleng, 98221-1 and NB63; three accessions, Zangqing85, Zangqing3 and Ximala6, with the highest amylose content (>29%); five accessions with Am/Ap less than 0.25, including 99033-6, Chun Qingke, A Ba 330, Jan-03, Mi Mai114, 396, NB63-1 and 92013; seven accessions had a pasting temperature under 60, ℃meanwhile their peak viscosity beyond 1000BU and their peak temperature under 90℃，including Zu Cuochun, Jan-03, A Ba 330, Mi Mai 114, Chun Qingke, 20003 and A Qing 5. 4. There were high correlations between starch properties. Amylose content and Am/Ap were positively correlated to pasting temperature, negatively correlated to peak viscosity, negatively correlated to the number and granule size of A-type granule. Different SGAP combinations caused significant diversities in starch content and pasting properties. SGAP2, SGAP5, SGAP6 and SGAP7 may have positive effect on amylose content, Am/Ap and pasting temperature; SGAP3, SGAP9∼SGAP20 may have positive effect on peak viscosity. Our research made a comprehensive evaluation on the hulless barley starch from the Qinghai-Tibet Plateau, we can get a systemic understanding. Some special accessions were screened out can be used on the hulless barley breeding lines and industries utilization.The combination of the SGAPs may become a criterion to evaluate the hulless barley endosperm starch quality. Consequently, the results will be good information for further studies on the hulless barley.

Extração e caracterização de amido de jacatupé (Pachyrhizus ahipa)

O gênero Pachyrhizus tem sido estudado como fonte de matéria-prima amilácea devido ao considerável teor de amido nas raízes de suas espécies. Neste trabalho objetivou-se caracterizar raízes de P. ahipa, processar em laboratório para a extração do amido e analisá-lo quanto à composição centesimal, teor de amilose, formato e tamanho de grânulos em microscópio eletrônico de varredura e viscosidade das pastas (RVA). As raízes de P. ahipa apresentaram 18% de massa seca sendo 7,68% amido. O rendimento obtido de amido foi baixo (4,28%), apontando para a necessidade de estudos que melhorem o processo de extração. O produto obtido apresentou 12,3% de umidade, 84% de amido com 13% de amilose e baixos teores de outros componentes (base úmida). A análise em microscópio eletrônico de varredura mostrou grânulos de amido de formas circular e poligonal, com tamanho variando entre 10 e 25mm. O perfil de viscosidade apresentado por este amido mostrou baixa temperatura de pasta (56ºC) e pico de viscosidade a 272 RVU, estando este último valor próximo ao observado para amido de mandioca, sob as mesmas condições. O amido de P. ahipa apresentou ainda, baixa estabilidade da pasta a quente e tendência à retrogradação com o resfriamento.

Structural and functional characteristics of selected soft wheat starches

Starches from eight soft wheat samples (two parent lines and six offspring) were isolated; relationships between their structures and properties were examined. Branch chain-length distributions of amylopectins were determined by using high-performance anion exchange chromatography equipped with an amyloglucosidase reactor and a pulsed amperometric detector (HPAEC-ENZ-PAD). Results showed that the average chain length of the eight samples varied at DP 25.6-26.9. Starch samples of lines 02, 60, 63, 95, and 114 consisted of amylopectins with more long chains (DP greater than or equal to 37) and longer average chain length (DP 26.2-26.9) than that of other samples. These starch samples of longer branch chain length displayed higher gelatinization temperatures (55.3-56.5degreesC) than that of other samples (54.4-54.9degreesC) and higher peak viscosity (110-131 RVU) and lower pasting temperature (86.3-87.6degreesC) than others (83-100 RVU and 88.2-88.9degreesC, respectively). The M-w of amylopectins, determined by using high-performance size exclusion chromatography equipped with multiangle laser-light scattering and refractive index detectors (HPSEC-MALLS-RI), were similar for all samples (6.17 x 10(8) to 6.97 x 10(8)). There were no significant differences in amylose and phosphorus contents between samples. These results indicated that physical properties of wheat starch were affected by the branch-chain length of amylopectin.

New starches for the food industry: Curcuma longa and Curcuma zedoaria

The evolution of the food sector has increased interest in the identification of new starches with distinct properties. Curcuma longa and Curcuma zedoaria rhizomes, which are already used in industry to obtain food coloring and pharmaceutical products, may become commercially interesting as starch raw materials. This work aimed to characterize the starch of two Curcuma species. The results revealed that the rhizomes of two species showed low dry matter and high starch contents. The amylose contents of the starches (22% C. longa and 21% C. zedoaria) were similar to potato starch. The results of microscopic analysis showed flat triangular shape and the size was 20-30 mum for two starches. The final viscosity of C longa was high (740 RVU) and the pasting temperature was 81 degreesC. In C. zedoaria the final viscosity was 427 RVU and the pasting temperature was 78 degreesC. These results differed from standard commercially used natural starches. (C) 2003 Elsevier Ltd. All rights reserved.

Thermal, rheological, and structural behaviors of natural and modified cassava starch granules, with sodium hypochlorite solutions

The use of chemically modified starches is widely accepted in various industries, with several applications. In this research, natural cassava starch granules were treated with standard sodium hypochlorite solution at 0.8, 2.0, and 5.0 g Cl/100 g starch. The native and modified starch samples were investigated by means of the following techniques: simultaneous thermogravimetry-differential thermal analysis, which allowed us to verify the thermal decomposition associated with endothermic or exothermic phenomena; and differential scanning calorimetry that was used to determine gelatinization enthalpy as well as the rapid viscoamylographic analysis that provided the pasting temperature and viscosity. By means of non-contact-atomic force microscopy method and X-ray powder patterns diffractometry, it was possible to observe the surface morphology, topography of starch granules, and alterations in the granules' crystallinity. © 2012 Akadémiai Kiadó, Budapest, Hungary.

Efeitos de tratamentos hidrotérmicos nas propriedades viscográficas e amidos resistentes em féculas de mandioca

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of fructooligosaccharides on the physicochemical properties of sour cassava starch and baking quality of gluten-free cheese bread

The present research was undertaken to explore the influence of fructooligosaccharides (FOS) on the functional and thermal properties of sour cassava starch and the quality characteristics of gluten-free (GF) cheese bread. Fructooligosaccharides were used to replace sour cassava starch at substitution level of 9% (SF1), 17% (SF2), and 29% (SF3). The functional and thermal properties of the starch-FOS mixtures were determined by the water absorption index (WAI), water solubility index (WSI), pasting profile analysis, thermal transition temperatures and enthalpy of gelatinization. Moreover, the GF cheese breads with starch-FOS mixtures were analyzed for height, diameter, weight, specific volume and dough moisture content. The sample with the highest FOS content (SF3) presented the lowest WAI (1.44), peak (62.4 rapid visco units (RVU), breakdown (53.4 RVU), final (13.8 RVU), and setback (4.9 RVU) viscosities, dough moisture content (31.7%), and enthalpy of gelatinization (9.5 J/g) and the highest WSI (29.4%) and pasting temperature (69.1 degrees C). The height, diameter and specific volume of GF cheese bread samples made from sour cassava starch were 3.14 cm, 6.35 cm, and 1.49 cm(3)/g, respectively. The SF1 mixture samples resulted in a 3.01 cm height, 6.34 cm diameter, and 1.55 cm(3)/g specific volume. According to Brazilian food labeling regulations, the latter product cannot be categorized as a good source of fiber because the minimum level of fiber per portion was not reached.

Effect of glycerol monostearate on the gelatinization behavior of maize starches with different amylose contents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological, thermal and physicochemical characteristics of small granules starch from Mirabilis jalapa L

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of heat-moisture treatment on the structural, physicochemical, and rheological characteristics of arrowroot starch

The effect of heat-moisture treatment on structural, physicochemical, and rheological characteristics of arrowroot starch was investigated. Heat-moisture treatment was performed with starch samples conditioned to 28% moisture at 100℃ for 2, 4, 8, and 16 h. Structural and physicochemical characterization of native and modified starches, as well as rheological assays with gels of native and 4 h modified starches subjected to acid and sterilization stresses were performed. Arrowroot starch had 23.1% of amylose and a CA-type crystalline pattern that changed over the treatment time to A-type. Modified starches had higher pasting temperature and lower peak viscosity while breakdown viscosity practically disappeared, independently of the treatment time. Gelatinization temperature and crystallinity increased, while enthalpy, swelling power, and solubility decreased with the treatment. Gels from modified starches, independently of the stress conditions, were found to have more stable apparent viscosities and higher G' and G″ than gels from native starch. Heat-moisture treatment caused a reorganization of starch chains that increased molecular interactions. This increase resulted in higher paste stability and strengthened gels that showed higher resistance to shearing and heat, even after acid or sterilization conditions. A treatment time of 4 h was enough to deeply changing the physicochemical properties of starch.

Xylanolytic modification in wheat flour and its effect on dough rheological characteristics and bread quality attributes

Effects of various xylanase treatments applied at different stages of bread making process on dough rheological characteristics and bread quality attributes were investigated. Different doses (200, 400, 600, 800, and 1000 IU) of purified enzyme were applied at two stages (tempering and mixing). In milling and dough making processes, both types of flour (subjected to enzyme treatment during tempering and flour mixing) exhibited decreasing trend in water absorption, dough development time, dough stability, softening of dough, dough mixing time, viscosity peak, set back, and increasing tendency in peak height and pasting temperature. Treatments during tempering resulted in more significant effects as compared to applications during flour mixing. The dough rising during proofing resulted in enhancement from 137±3.21% (control) to maximum value (192.33±2.90%), when 600 IU of xylanases were applied to 1 kg of wheat grains during tempering. The bread sensory attributes also exhibited significant improvement in response to various doses of purified enzymes.

Thermal and pasting properties of cassava starch-dehydrated orange pulp blends

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A new low temperature synthesis route of fraipontite (Zn,Al)3(Si,Al)2O5(OH)4

A low temperature synthesis method based on the decomposition of urea at 90°C in water has been developed to synthesise fraipontite. This material is characterised by a basal reflection 001 at 7.44 Å. The trioctahedral nature of the fraipontite is shown by the presence of a 06l band around 1.54 Å, while a minor band around 1.51 Å indicates some cation ordering between Zn and Al resulting in Al-rich areas with a more dioctahedral nature. TEM and IR indicate that no separate kaolinite phase is present. An increase in the Al content however, did result in the formation of some SiO2 in the form of quartz. Minor impurities of carbonate salts were observed during the synthesis caused by to the formation of CO32- during the decomposition of urea.