Morphological Studies on the Mature Worker Larvae of Paratrechina fulva (Hymenoptera, Formicidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of a methodology of collection and rearing of the invasive ant Paratrechina longicornis Latreille (Hymenoptera: Formicidae) in the laboratory.

The genus Paratrechina is a cosmopolitan group, with some species invading residences and hospitals. In Brazil, the most important species are: Paratrechina fulva and Paratrechina longicornis. In spite of the importance of these species as urban pests, there is a lack of information on their biology, since studies on urban ants are rather recent in our country and also due to the difficulty of keeping colonies of P. longicornis in the laboratory. Therefore, the present study was aimed at developing two methodologies: one suitable for collecting and another for keeping colonies of P. longicornis in the laboratory. Concerning the collections, four methodologies were analyzed, while for keeping colonies in the laboratory, the types of containers where the colonies would be stored as well as the food items that would comprise their diet were evaluated. The most adequate methodology for collecting was the one performed using an entomological aspirator. Regarding the maintenance of colonies, the most adequate container was the test tube with cotton steeped in water, while in the tests on food attractiveness, the workers showed preference for sugary liquids and dead insects, mainly termites. Moreover, two infestations of mites from the families Acaridae, Macrochelidae (genus Macrocheles) and Uropodidae in the colonies of P. longicornis have occurred, which caused a significant mortality of the colonies, due to an unbalance in the social behavior of the ants.

Immature development in the tramp species ant Paratrechina longicornis (Hymenoptera, formicidae)

The genus Paratrechina (Motschulsky) is composed of about 147 cosmopolitan ant species and subspecies, of which some were accidentally spread by commerce around the world, infesting houses and hospitals. In Brazil, two species are of remarkable economic importance: Paratrechina fulva (Mayr) and Paratrechina longicornis (Latreille). The present paper aims to report the following aspects on the biology of P. longicornis: number of larval instars, growth rates, duration and viability of the developmental stages and some observations on brood-care behaviour. Artificial colonies were kept under controlled temperature (25±2°C) and relative humidity (60±10%) conditions. To access the number of larval instars, we analyzed 1531 larvae fixed in Dietrich by measuring their maximum head capsule widths. We analysed ten artificial colonies daily to measure the developmental time and viability of immatures. We found P. longicornis presented three larval instars and a mean growth ratio of 1.2988. Egg stage was found to last 16.1 ±0.1 days, with a viability of 24.6%; larval stages were found to last 18.3±0.1 days, with a viability of 33.3% and the pupal stage was found to last 12.3±0.1 days, with a viability of 65.3%.

Ant communities (Hymenoptera: Formicidae) in an urban ecosystem near the Atlantic Rainforest

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hybridization between two serranids, the coney (Cephalopholis fulva) and the creole-fish (Paranthias furcifer), at Bermuda

Intergeneric hybridization between the epinepheline serranids Cephalopholis fulva and Paranthias furcifer in waters off Bermuda was investigated by using morphological and molecular characters. Putative hybrids, as well as members of each presumed parent species, were analyzed for 44 morphological characters and screened for genetic variation at 16 nuclear allozyme loci, two nuclear (n)DNA loci, and three mitochondrial (mt)DNA gene regions. Four of 16 allozyme loci, creatine kinase (CK-B*), fumarase (FH*), isocitrate dehydrogenase (ICDH-S*), and lactate dehydrogenase (LDH-B*), were unique in C. fulva and P. furcifer. Restriction fragments of two nuclear DNA intron regions, an actin gene intron and the second intron in the S7 ribosomal protein gene, also exhibited consistent differences between the two presumed parent species. Restriction fragments of three mtDNA regions—ND4, ATPase 6, and 12S/16S ribosomal RNA—were analyzed to identify maternal parentage of putative hybrids. Both morphological data and nuclear genetic data were found to be consistent with the hypothesis that the putative hybrids were the result of interbreeding between C. fulva and P. furcifer. Mean values of 38 morphological characters were different between presumed parent species, and putative hybrids were intermediate to presumed parent species for 33 of these characters. A principal component analysis of the morphological and meristic data was also consistent with hybridization between C. fulva and P. furcifer. Thirteen of 15 putative hybrids were heterozygous at all diagnostic nuclear loci, consistent with F1 hybrids. Two putative hybrids were identified as post-F1 hybrids based on homozygosity at one nuclear locus each. Mitochondrial DNA analysis showed that the maternal parent of all putative hybrid individuals was C. fulva. A survey of nuclear and mitochondrial loci of 57 C. fulva and 37 P. furcifer from Bermuda revealed no evidence of introgression between the parent species mediated by hybridization.

“Studies on glucose tolerant β-glucosidases from a novel Byssochlamys fulva and their applications in biomass to ethanol conversion”

Beta-glucosidases are critical enzymes in biomass hydrolysis process and is important in creating highly efficient enzyme cocktails for the bio-ethanol industry. Among the two strategies proposed for overcoming the glucose inhibition of commercial cellulases, one is to use heavy dose of BGL in the enzyme blends and the second is to do simultaneous saccharification and fermentation where glucose is converted to alcohol as soon as it is being generated. While the former needs extremely high quantities of enzyme, the latter is inefficient since the conditions for hydrolysis and fermentation are different. This makes the process technically challenging and also in this case, the alcohol generation is lesser, making its recovery difficult. A third option is to use glucose tolerant β-glucosidases which can work at elevated glucose concentrations. However, there are very few reports on such enzymes from microbial sources especially filamentous fungi which can be cultivated on cheap biomass as raw material. There has been very less number of studies directed at this, though there is every possibility that filamentous fungi that are efficient degraders of biomass may harbor such enzymes. The study therefore aimed at isolating a fungus capable of secreting glucose tolerant β- glucosidase enzyme. Production, characterization of β-glucosidases and application of BGL for bioethanol production were attempted.

Influence of package, type of apple juice and temperature on the production of patulin by Byssochlamys nivea and Byssochlamys fulva

Although the production of patulin in apple fruits is mainly by Penicillium expansum, there is no information on the ability of heat resistant moulds that may survive pasteurization to produce this mycotoxin in juice packages during storage and distribution. In this study, the production of patulin by Byssochlamys spp (Byssochlamys nivea FRR 4421, B. nivea ATCC 24008 and Byssochlamys fulva IOC 4518) in cloudy and clarified apple juices packaged in laminated paperboard packages or in polyethylene terephthalate bottles (PET) and stored at both 21 degrees C and 30 degrees C, was investigated. The three Byssochlamys strains were able to produce patulin in both cloudy and clarified apple juices. Overall, the lower the storage temperature, the lower the patulin levels and mycelium dry weight in the apple juices (p<0.05). The greatest variations in pH and degrees Brix were observed in the juices from which the greatest mycelium dry weights were recovered. The maximum levels of patulin recovered from the juices were ca. 150 mu g/kg at 21 degrees C and 220 mu g/kg at 30 degrees C. HPLC-UV, HPCL-DAD and mass spectrometry analyses confirmed the ability of B. fulva IOC 4518 to produce patulin. Due to the heat resistance of B. nivea and B. fulva and their ability to produce patulin either in PET bottles or in laminated paperboard packages, the control of contamination and the incidence of these fungi should be a matter of concern for food safety. Control measures taken by juice industries must also focus on controlling the ascospores of heat resistant moulds. (C) 2010 Elsevier B.V. All rights reserved.

Chemical variability within the marine sponge Aplysina fulva

Dibromotyrosine-derived metabolites are of common occurrence within marine sponges belonging to the order Verongida. However, previous chemical analysis of crude extracts obtained from samples of the verongid sponge Aplysina fulva collected in Brazil did not provide any dibromotyrosine-derived compounds. In this investigation, five samples of A. fulva from five different locations along the Brazilian coastline and one sample from a temperate reef in the South Atlantic Bight (SAB) (Georgia, USA) were investigated for the presence of bromotyrosine-derived compounds. All six samples collected yielded dibromotyrosine-derived compounds, including a new derivative, named aplysinafulvin, which has been identified by. analysis of spectroscopic data. These results confirm previous assumptions that dibromotyrosine-derived metabolites can be considered as chemotaxonomic markers of verongid sponges. The isolation of aplysinafulvin provides additional support for a biogenetic pathway involving an arene oxide intermediate in the biosynthesis of Verongida metabolites. It cannot yet be established if the chemical variability observed among the six samples of A.fulva collected in Brazil and the SAB is the result of different environmental factors, distinct chemical extraction and isolation protocols, or a consequence of hidden genetic diversity within the postulated morphological plasticity of this species. (C) 2007 Elsevier Ltd. All rights reserved.

Análise da estrutura genética populacional da piraúna (cephalopholis fulva: serranidae) ao longo da costa e ilhas oceânicas brasileiras

Brazil has about 8,500 km of coastline and on this scale, fishing is a historically important source of animal protein for human consumption. The national fishing background shows a growth of marine fishery production until 1985 and within this period it was recorded a steady decline. From the year 2003 fishing statistics aim to some "recovery" of the total fisheries production, which probably is related to a change in industry practice. The target of commercial fishing became smaller species with low commercial value, but very abundants. The coney, Cephalopholis fulva (Serranidae), is one of these species that have been suffering a greater fishing pressure in recent years. In order to provide data about the current situation of the genetic diversity of these populations, several molecular markers have been being used for this purpose. The prior knowledge of genetic variability is crucial for management and biodiversity conservation. To this end, the control region sequences (dloop) of mtDNA from Cephalopholis fulva (Serranidae) from five geographical points of the coast of Brazil (Ceará, Rio Grande do Norte, Bahia and Espírito Santo) and the Archipelago of Fernando de Noronha (FN) were sequenced and their genetic diversity analyzed. The FST values were very low (0.0246 to 0.000), indicating high gene flow between the sampled spots. The indices h and indicate a secondary contact between previously allopatric lineages differentiated or large and stable populations with long evolutionary history. Tests of Tajima and Fu showed expansion for all populations. In contrast, the mismatch distribution and SSD indicated expansion just for coastal populations. Unlike other species of the Atlantic which have been deeply affected by events on later Pleistocene, the population-genetic patterns of C. fulva may be related to recent events occurred approximately 130,000 years ago. Moreover, the data presented by geographical samples of the specie C. fulva showed high genetic diversity, also indicating the absence of deleterious effects of over-exploitation on this specie, as well as evidence of complete panmixia between all sampled populations

Ultramorphology of the Digestive Tract of Paratrechina longicornis (Hymenoptera, Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

LIMITED MULTIPLE-MATING IN MALES AND SINGLE-MATING IN FEMALES OF THE ANT SPECIES, PARATRECHINA-FLAVIPES (FR SMITH) (HYMENOPTERA, FORMICIDAE)

This study determined how many times alates of Paratrechina flavipes (Hymenoptera: Formicidae) can copulate in the field and laboratory. In the field, females preferred to mate once and the mating number of males is unknown. In the laboratory, females mated singly but males could inseminate two or three females. The duration of succeeding copulations was greater than the first copulation. Multiple mating males died sooner than single mating ones. The results suggest that male death is promoted by sperm consumption.

On the immature stages of the crazy ant Paratrechina longicornis (Latreille 1802) (Hymenoptera: Formicidae)

The ant Paratrechina longicornis is a cosmopolitan ant species that has been accidentally spread by commerce around the world, and now is a pest of houses and hospitals. The morphology of its larval stages has been previously described without knowledge of the number of instars. The present study revisits the original description of P. longicornis larvae by adding differences observed among the three larval instars. Compared to other Paratrechina species studied so far, P. longicornis presents smaller larvae, less evident variation in mandible morphology, and clear variation in the morphology of head hairs between the analysed specimens of the second and third instar larvae. Ultrastructural images of the eggs, larval spiracle ornamentation, and pupae are also presented for the first time. Copyright © 2007 - Magnolia Press.