Applications of optically active metallacycles: new useful materials for the determination of the enantiomeric excess of Lewis bases and as resolving agents for monodentate phosphines

Es descriu la síntesi de nous compostos ciclopal·ladats derivats d'imines i amines primàries, òpticament actius, així com les seves aplicacions per a la determinació de l'excés enantiomèric i per a la resolució de bases de Lewis. També es comenta la síntesi i resolució de noves fosfines P-quirals, així com la seva aplicació a processos de catàlisi asimètrica. A més, es descriu la preparació d'algunes fosfines secundàries quirals i s'estudia la seva estabilitat configuracional.

Ability of Ru complexes for ROMP tuned through a combination of phosphines and amines

Polynorbonerne with high molecular weight was obtained via ring opening metathesis polymerization using catalysts derived from [RuCl(2)(PPh(2)Bz)(2) L] (1 for L = PPh(2) Bz; 2 for L = piperidine) type of complexes when in the presence of ethyl diazoacetate in CHCl(3). The polymer precipitated within a few minutes at 50 degrees C when using 1 with ca. 50% yield ([NBE]/[Ru] = 5000). Regarding 2, for either 30 min at 25 C or 5 min at 50 degrees C, more than 90% of yields are obtained; and at 50 C for 30 min a quantitative yield is obtained. The yield and PDI values are sensitive to the [NBE]/[Ru] ratio. The reaction of 1 with either isonicotinamide or nicotinamide produces six-coordinated complexes of [RuCl(2)(PPh(2)Bz)(2)(L)(2)] type, which are almost inactive and produce only small amounts of polymers at 50 C for 30 min. Thus, we Concluded that the novel complexes show very distinct reactivities for ROMP of NBE. This has been rationalized on account of a combination of synergistic effects of the phosphine-amine ancillary ligands. (C) 2009 Elsevier B.V. All rights reserved.

New ruthenium(II)/phosphines/diimines complexes: Promising antitumor (human breast cancer) and Mycobacterium tuberculosis fighting agents

The synthesis and characterization of ruthenium compounds of the type [RuCl2(P)2(N-N)] [(P)2 = (PPh3) 2, dppb = 1,4-bis(diphenylphosphino)butano; dppp = 1,3-bis(diphenylphosphino)propane; N-N = 5,5′-dimethyl-2,2′dipyridyl (5,5′-mebipy) or 4,4′-dimethyl-2,2′dipyridyl (4,4′-mebipy)] are described. The complexes were characterized using elemental analysis, UV-Vis and infrared spectroscopies, cyclic voltammetry, and X-ray crystallography. In vitro evaluation of the complexes, using the MTT methodology, revealed their cytotoxic activities in a range of 5.4-15.7 μM against the MDA-MB-231 breast tumor cells and showed that, in this case, they are more active than the reference metallodrug cisplatin. The in vitro antimycobacterial activities of the complexes had their Minimum Inhibitory Concentration (MIC) for MTB cell growth measured, by the REMA method. The MICs for these complexes were found to be between 12.5 and 25.0 μg/mL. The results are comparable with the second line drug cycloserine (MIC = 12.5-50.0 μg/mL), commonly used in the treatment of TB. © 2013 Elsevier Ltd. All rights reserved.

Rhodium clusters: investigation of the reactivity towaeds phosphines and selected d- and p-metals

During my PhD we focused on different research projects concerning the synthesis and characterization of new rhodium carbonyl clusters. More specifically, we studied the reactivity between Rh4(CO)12 and different bidentate phosphines, obtaining seven different species: Rh4(CO)10(dppe), Rh4(CO)8(dppe)2, Rh4(CO)10(dppf), {Rh4(CO)10(dpp-hexane)}2, {Rh4(CO)10(t-dppe)}2, Rh2(CO)2(dppf)2 and Rh4(CO)9(μ2-dppe)(μ1-dppeO). The reactivity of [Rh7(CO)16]3- with [AuCl4]- and Au(Et2S)Cl led to the formation of seven bimetallic clusters, of which four new ones, namely [Rh16Au6(CO)36]6-, [Rh10Au(CO)26]3-, [Rh16Au6(CO)36]4-, [Rh16Au6(CO)36]5-, [Rh22Au3(CO)47]5-, [Rh19Au5(CO)40]4- and [Rh20Au7(CO)45]5-. The reactivity of [Rh16Au6(CO)36]6- and [Rh10Au(CO)26]3- was studied as well. The reactivity of [Rh7(CO)16]3- with AgBF4, AgNO3 and with Pt(Et2S)2Cl2 was investigated, yielding only to the already known [Rh6N(CO)15]-, [PtRh5(CO)15]- and [PtRh4(CO)14]2- compounds. [Rh7(CO)16]3- war reacted with SnCl2·2H2O in acetone obtaining [Rh7Sn4Cl10(CO)14]5-, and [Rh12Sn(CO)23Cl2]4- was reacted with H+ obtaining [Rh18Sn3Cl2(CO)44]4-. Reactivity of [Rh7(CO)16]3- with InCl3 resulted in the isolation of [Rh12In(CO)28]3- and [Rh11In3(CO)25Cl2]3-, already known in our research lab, and the new [HRh11In(CO)26]3-. Moreover, a more straightforward synthesis for [Rh6InCl3(CO)15]2- was found, and this also led to the isolation of the [Rh6InCl2(DMF)(CO)15]-. The recover or rhodium as valuable carbonyl compound was also studied, and starting from a mixture of by-products it was possible to obtain the starting material [Rh7(CO)16]3-.

Mechanisms of substitution reactions on cyclometallated platinum(IV) complexes: "Quasi-labile" systems

The substitution reactions of SMe2 by phosphines (PMePh2, PEtPh2, PPh3, P(4-MeC6H4)(3), P(3-MeC6H4)(3), PCy3) on Pt-IV complexes having a cyclometalated imine ligand, two methyl groups in a cis-geometrical arrangement, a halogen, and a dimethyl sulfide as ligands, [Pt(CN)(CH3)(2)(X)(SMe2)], have been studied as a function of temperature, solvent, and electronic and steric characteristics of the phosphines and the X and CN ligands. In all cases, a limiting dissociative mechanism has been found, where the dissociation of the SMe2 ligand corresponds to the rate-determining step. The pentacoordinated species formed behaves as a true pentacoordinated Pt-IV compound in a steady-state concentration, given the solvent independence of the rate constant. The X-ray crystal structures of two of the dimethyl sulfide complexes and a derivative of the pentacoordinate intermediate have been determined. Differences in the individual rate constants for the entrance of the phosphine ligand can only be estimated as reactivity ratios. In all cases an effect of the phosphine size is detected, indicating that an associative step takes place from the pentacoordinated intermediate. The nature of the (CN) imine and X ligands produces differences in the dimethyl sulfide dissociation reactions rates, which can be quantified by the corresponding DeltaS double dagger values (72, 64, 48, 31, and 78 J K-1 mol(-1) for CN/X being C6H4CHNCH2C6H5/Br, C6H4CHNCH2-(2,4,6-(CH3)(3))C6H2/Br, C6H4CHNCH2C6H5/Cl, C6Cl4CHNCH2C6H5/Cl, and C6W4CH2NCHC6H5/ Pr, respectively). As a whole, the donor character of the coordinated C-aromatic and X atoms have the greatest influence on the dissociativeness of the rate-determining step.

Synthesis, characterization and reactivity of new cobalt, palladium and nickel complexes bearing α-diimines and P, O ligands

This work describes the synthesis and characterization of a series of new α-diimine and P,O, β-keto and acetamide phosphines ligands, and their complexation to Ni(II), Co(II),Co(III) and Pd(II) to obtain a series of new compounds aiming to study their structural characteristics and to test their catalytic activity. All the compounds synthesized were characterized by the usual spectroscopic and spectrometric techniques: Elemental Analysis, MALDI-TOF-MS spectrometry, IR, UV-vis, 1H, 13C and 31P NMR spectroscopies. Some of the paramagnetic compounds were also characterized by EPR. For the majority of the compounds it was possible to solve their solid state structure by single crystal X-ray diffraction. Tests for olefin polymerization were performed in order to determine the catalytic activity of the Co(II) complexes. Chapter I presents a brief introduction to homogenous catalysis, highlighting the reactions catalyzed by the type of compounds described in this thesis, namely olefin polymerization and oligomerization and reactions catalyzed by the complexes bearing α-diimines and P,O type ligands. Chapter II is dedicated to the description of the synthesis of new α-diimines cobalt (II) complexes, of general formula [CoX2(α-diimine)], where X = Cl or I and the α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl-1,4-diaza-1,3-butadiene (Ar-DAB). Structures solved by single crystal X-ray diffraction were obtained for all the described complexes. For some of the compounds, X-band EPR measurements were performed on polycrystalline samples, showing a high-spin Co(II) (S = 3/2) ion, in a distorted axial environment. EPR single crystal experiments on two of the compounds allowed us to determine the g tensor orientation in the molecular structure. In Chapter III we continue with the synthesis and characterization of more cobalt (II)complexes bearing α-diimines of general formula [CoX2(α-diimine)], with X = Cl or I and α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl- 1,4-diaza-1,3-butadiene (Ar-DAB). The structures of three of the new compounds synthesized were determined by single crystal X-ray diffraction. A NMR paramagnetic characterization of all the compounds described is presented. Ethylene polymerization tests were done to determine the catalytic activity of several of the Co(II) complexes described in Chapter II and III and their results are shown. In Chapter IV a new rigid bidentate ligand, bis(1-naphthylimino)acenaphthene, and its complexes with Zn(II) and Pd(II), were synthesized. Both the ligand and its complexes show syn and anti isomers. Structures of the ligand and the anti isomer of the Pd(II) complex were solved by single crystal X-ray diffraction. All the compounds were characterized by elemental analysis, MALDI-TOF-MS spectrometry, and by IR, UV-vis, 1H, 13C, 1H-1H COSY, 1H-13C HSQC, 1H-13C HSQC-TOCSY and 1H-1H NOESY NMR when necessary. DFT studies showed that both conformers of [PdCl2(BIAN)] are isoenergetics and can be obtain experimentally. However, we can predict that the isomerization process is not available in square-planar complex, but is possible for the free ligand. The molecular geometry is very similar in both isomers, and only different orientations for naphthyl groups can be expected. Chapter V describes the synthesis of new P, O type ligands, β-keto phosphine, R2PCH2C(O)Ph, and acetamide phosphine R2PNHC(O)Me, as well as a series of new cobalt(III) complexes namely [(η5-C5H5)CoI2{Ph2PCH2C(O)Ph}], and [(η5- C5H5)CoI2{Ph2PNHC(O)Me}]. Treating these Co(III) compounds with an excess of Et3N, resulted in complexes η2-phosphinoenolate [(η5-C5H5)CoI{Ph2PCH…C(…O)Ph}] and η2- acetamide phosphine [(η5-C5H5)CoI{Ph2PN…C(…O)Me}]. Nickel (II) complexes were also obtained: cis-[Ni(Ph2PN…C(…O)Me)2] and cis-[Ni((i-Pr)2PN…C(…O)Me)2]. Their geometry and isomerism were discussed. Seven structures of the compounds described in this chapter were determined by single crystal X-ray diffraction. The general conclusions of this work can be found in Chapter VI.

Borohidreto complexos de cobre (I) contendo difosfinas: caracterização espectroscópica e comportamento térmico

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(eta²-BH4)(dppm)] (1), [Cu(eta²-BH4)(dppe)] (2), [Cu(eta²-BH4)(cis-dppet)] (3) and [Cu(eta²-BH4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH4 group to the copper atom and the 31P{¹H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(eta²-BH4)(dppe)] (2) > [Cu(eta²-BH4)(dppm)] (1) > [Cu(eta²-BH4)(dppb)] (4) > [Cu(eta²-BH4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO2)2, CuO, CuO2 and Cu as final products.

Investigação do mecanismo de catálise ROMP do norborneno utilizando métodos de funcional de densidade

This work presents a density functional theory study of the norbornene ROMP metathesis reactions. The energies have been calculated in a Grubbs catalyst model Cl2(PH3)2Ru=CH2. The geometries and energy profile are similar to the Grubbs metilydene (Cl2(PCy3)2Ru=CH2 real model. It was found that the metathesis reaction proceeds via associative mechanism (catalyst-norbonene) followed by dissociative substitution of a phosphine ligand with norbonene, giving a monophosphine complex. The results are in reasonable agreement with the available experimental data. The dissociation energy of the phosphines is predicted to be 23.2 kcal mol-1.

NMR studies of the exchange reactions of CH3CN.BX3 with excess CH3CN /|nJoseph Fogelman. -- 260 St. Catharines, Ont. : [s. n.],

Exchange reactions between molecular complexes and excess acid or base are well known and have been extensively surveyed in the literature(l). Since the exchange mechanism will, in some way involve the breaking of the labile donor-acceptor bond, it follows that a discussion of the factors relating to bonding in molecular complexes will be relevant. In general, a strong Lewis base and a strong Lewis acid form a stable adduct provided that certain stereochemical requirements are met. A strong Lewis base has the following characteristics (1),(2) (i) high electron density at the donor site. (ii) a non-bonded electron pair which has a low ionization potential (iii) electron donating substituents at the donor atom site. (iv) facile approach of the site of the Lewis base to the acceptor site as dictated by the steric hindrance of the substituents. Examples of typical Lewis bases are ethers, nitriles, ketones, alcohols, amines and phosphines. For a strong Lewis acid, the following properties are important:( i) low electron density at the acceptor site. (ii) electron withdrawing substituents. (iii) substituents which do not interfere with the close approach of the Lewis base. (iv) availability of a vacant orbital capable of accepting the lone electron pair of the donor atom. Examples of Lewis acids are the group III and IV halides such (M=B, AI, Ga, In) and MX4 - (M=Si, Ge, Sn, Pb). The relative bond strengths of molecular complexes have been investigated by:- (i) (ii) (iii) (iv) (v] (vi) dipole moment measurements (3). shifts of the carbonyl peaks in the IIIR. (4) ,(5), (6) .. NMR chemical shift data (4),(7),(8),(9). D.V. and visible spectrophotometric shifts (10),(11). equilibrium constant data (12), (13). heats of dissociation and heats of reactions (l~), (16), (17), (18), (19). Many experiments have bben carried out on boron trihalides in order to determine their relative acid strengths. Using pyridine, nitrobenzene, acetonitrile and trimethylamine as reference Lewis bases, it was found that the acid strength varied in order:RBx3 > BC1 3 >BF 3 • For the acetonitrile-boron trihalide and trimethylamine boron trihalide complexes in nitrobenzene, an-NMR study (7) showed that the shift to lower field was. greatest for the BB~3 adduct ~n~ smallest for the BF 3 which is in agreement with the acid strengths. If electronegativities of the substituents were the only important effect, and since c~ Br ,one would expect the electron density at the boron nucleus to vary as BF3

Phospha-adamantanes as ligands for palladium-catalyzed cross-coupling reactions

New and robust methodologies have been designed for palladium-catalyzed crosscoupling reactions involving·a novel·class oftertiary phosphine ligand incorporating a phospha-adamantane framework. It has been realized that bulky, electron-rich phosphines, when used as ligands for palladium, allow for cross-coupling reactions involving even the less reactive aryl halide substrates with a variety of coupling partners. In an effort to design new ligands suitable for carrying out cross-coupling transformations, the secondary phosphine, 1,3,5,7-tetramethyl-2,4,8-trioxa-6phosphaadamantane was converted into a number of tertiary phosphine derivatives. The ability of these tertiary phosphaadamantanes to act as effective ligands in the palladiumcatalyzed Suzuki cross-coupling was examined. 1,3,5,7-Tetramethyl-6-phenyl-2,4,8trioxa- 6-phosphaadamantane (PA-Ph) used in combination with Pdz(dba)3permitted the reaction of an array of aryl iodides, bromides and chlorides with a variety arylboronic acids to give biaryls in good to excellent yields. Subsequently, palladium complexes of PA-Ph were prepared and isolated in high yields as air stable palladium bisphosphine complexes. Two different kinds of crystals were isolated and upon characterization revealed two complexes, Pd(PA-Ph)z.dba and Pd(PA-Ph)zOz. Preliminary screening for their catalytic activity indicated that the former is more reactive than the latter. Pd(PAPh) z.dba was applied as the catalyst for Sonogashira cross-coupling reactions of aryl iodides and bromides and in the reactions of aryl bromides and chlorides with ketones to give a-arylated ketones at mild temperatures in high yields.

Complexes pinceurs de type POCOP de Nickel (II) : synthèse, caractérisation, réactivité et applications catalytiques

Ce mémoire décrit la synthèse, la caractérisation spectroscopique et l’étude de la réactivité catalytique d’une nouvelle série de complexes pinceurs de Ni(II) formés à partir du ligand POCOPPh (P,C,P-2,6-{Ph2PO}2C6H4), très peu étudié dans le cas du nickel. Les études décrites dans ce mémoire examinent l’effet des substituants des phosphines sur les propriétés spectroscopiques et électrochimiques ainsi que les activités catalytiques. La synthèse du ligand a été améliorée par rapport à la procédure connue dans la littérature en diminuant le temps de réaction à 30 min et la température jusqu'à température ambiante. Les composés pinceur (P,C,P-2,6-{Ph2PO}2C6H3)NiX ont été obtenus avec des rendements variant entre 60% et 88%. Le premier complexe a été synthétisé en faisant réagir le précurseur NiBr2(NCCH3)x avec le ligand POCOPPh pour donner (POCOPPh)NiBr. Ce dernier réagit par la suite avec les sels d’argent et de potassium pour donner 4 nouveaux complexes soient : (POCOPPh)NiCN, (POCOPPh)NiOTf, (POCOPPh)NiOAc et (POCOPPh)NiONO2 (OTf = triflate et OAc = acetate). Vu la réactivité limitée du dérivé bromure, le dérivé (POCOPPh)NiOTf a été utilisé pour la préparation du composé (POCOPPh)NiCCPh. Le dérivé Ni-OTf a été utilisé également pour la synthèse des complexes (POCOPPh)NiR qui ont été détectés par RMN. Ces complexes (POCOPPh)NiR ont montré une stabilité trop faible et donnent des nouveaux complexes de type (POCOPPh)NiX en échangeant l’halogène avec le Mg ou de type (POCOPPh)NiOH en s’hydrolysant. Les espèces cationiques [(POCOPPh)NiNCR][OTf] (R= Me, CHCH2, CHCHMe, C(Me)CH2, NCCH2CH2N(Ph)H) ont été obtenues facilement et avec des bon rendements à partir du (POCOPPh)NiOTf. Tous les composés obtenus ont été caractérisés par la spectroscopie RMN (1H, 13C{1H}, 31P{1H}, 19F{1H}), la spectroscopie IR et la spectroscopie UV-vis. L’analyse élémentaire et l’analyse par la diffraction des rayons X, dont le but est de résoudre la structure à l’état solide, ont été utilisées pour la plupart des complexes. Des études de voltampérométrie cyclique ont été menées pour déterminer la densité électronique des centres métalliques et l’effet des phosphines sur cette propriété électrochimique. Dans le but de déterminer l’effet des substituants des phosphines sur l’activité catalytique des complexes, nous avons évalué les réactivités catalytiques des deux complexes (POCOPPh)NiOTf et (POCOPi-Pr)NiOTf dans la réaction d’hydroamination des oléfines activés et plus spécifiquement l’acrylonitrile. Après optimisation des conditions expérimentales, on a constaté que la réactivité des deux composés sont similaires mais une grande différence apparaît après l’ajout des additifs. En effet, le complexe (POCOPi-Pr)NiOTf donne une bonne activité catalytique en présence de la triéthylamine, tandis que cette activité diminue considérablement en présence d’eau, contrairement au complexe (POCOPPh)NiOTf qui est plus actif en présence d’eau. Dans le cas du complexe (POCOPPh)NiOTf, on a pu montrer que la base se coordonne au nickel dans le produit formé après la réaction d’hydroamination, ce qui diminue l’activité de ce complexe dans certains cas. Également on a exploré la réaction de l’addition du lien O-H sur l’acrylonitrile, et étonnamment le complexe (POCOPPh)NiOTf est beaucoup plus actif que son homologue (POCOPi-Pr)NiOTf dans le cas des alcools aromatiques. Par contre, les alcools aliphatiques restent un défi majeur pour ce genre de complexe. Le mécanisme de cette réaction qui a été proposé montre que l’alcoolyse passe par les deux intermédiaires (POCOPPh)NiOAr et [(POCOPPh)NiOAr][HOAr] mais l’isolation de ces intermédiaires observés par RMN semble être difficile.

Aplicacions i mecanisme de la reacció d'hidroesterificació d'olefines. Compatibilització fibramatriu en poliolefines reforçades amb fibra de pi

En la primera part del present treball es presenta la investigació duta a terme sobre la reacció d'hidroesterificació d'olefines. S'analitzen els factors que afecten la reactivitat i quimioselectivitat de les reaccions d'hidroesterificació i deuterioesterificació en sistemes catalítics basats en complexes de pal·ladi amb lligands auxiliars de tipus fosfina. Es presenta un estudi detallat del mecanisme catalític a través del qual tenen lloc aquestes reaccions. La determinació del mecanisme de reacció ha estat aplicada a la obtenció d'una versió enantioselectiva de la mateixa. En una segona part del treball s'han analitzat diversos sistemes de modificació superficial de fibres naturals i el seu efecte sobre la compatibilitat fibra - matriu en materials compòsits de matriu poliolefínica. S'han caracteritzat les propietats superficials de fibres de pi químicament modificades. Les fibres naturals modificades s'han utilitzat en la preparació de materials compòsits, les propietats mecàniques, tèrmiques i termomecàniques dels quals han estat caracteritzades i analitzades.

Following the creation of active gold nanocatalysts from phosphine-stabilized molecular clusters

The phosphine-stabilised gold cluster [Au6(Ph2P-o-tolyl)6](NO3)2 is converted into an active nanocatalyst for the oxidation of benzyl alcohol through low-temperature peroxide-assisted removal of the phosphines, avoiding the high-temperature calcination process. The process was monitored using in-situ X-ray absorption spectroscopy, which revealed that after a certain period of the reaction with tertiary butyl hydrogen peroxide, the phosphine ligands are removed to form nanoparticles of gold which matches with the induction period seen in the catalytic reaction. Density functional theory calculations show that the energies required to remove the ligands from the [Au6Ln]2+ increase significantly with successive removal steps, suggesting that the process does not occur at once but sequentially. The calculations also reveal that ligand removal is accompanied by dramatic re-arrangements in the topology of the cluster core.

Synthesis and Structural Analysis of New Palladium(II) Thiosaccharinates with Triphenylphosphane or Diphosphanes

A series of palladium(II) thiosaccharinates with triphenylphosphane (PPh(3)), bis(diphenylphosphanyl)methane (dppm), and bis(diphenylphosphanyl)ethane (dppe) have been prepared and characterized. From mixtures of thiosaccharin, Htsac, and palladium(II) acetylacetonate, Pd(acac)(2), the palladium(II) thiosaccharinate, Pd(tsac)(2) (tsac: thiosaccharinate anion) (1) was prepared. The reaction of I with PPh(3), dppm, and dppe leads to the mononuclear species Pd(tsac)(2)(PPh(3))(2)center dot MeCN (2), [Pd(tsac)(2)(dppm)] (3), Pd(tsac)(2)(dppm)(2) (4), and [Pd(tsac)(2)(dppe)]center dot MeCN (5). Compounds 2, 4, and 5 have been prepared also by the reaction of Pd(acac)(2) with the corresponding phosphane and Htsac. All the new complexes have been characterized by chemical analysis, UV/Vis, IR, and Raman spectroscopy. Some of them have been also characterized by NMR spectroscopy. The crystalline structures of complexes 3, and 5 have been studied by X-ray diffraction techniques. Complex 3 crystallizes in the monoclinic space group P2(1)/n with a = 16.3537(2), b = 13.3981(3), c = 35.2277(7) angstrom, beta = 91.284(1)degrees, and Z = 8 molecules per unit cell, and complex 5 in P2(1)/n with a = 10.6445(8), b = 26.412(3), c = 15.781(2) angstrom, beta = 107.996(7)degrees, and Z = 4. In compounds 3 and 5, the palladium ions are in a distorted square planar environment. They are closely related, having two sulfur atoms of two thiosaccharinate anions, and two phosphorus atoms of one molecule of dppm or dppe, respectively, bonded to the Pd(II) atom. The molecular structure of complex 3 is the first reported for a mononuclear Pd(II)-dppm-thionate system.

Syntheses, crystal structure and theoretical investigation of novel heteroleptic complexes of nickel(II) with N-R-sulfonyldithiocarbimate and phosphine ligands

Five new complexes of general formula: [Ni(RSO(2)N=CS(2))(dppe)], where R = C(6)H(5) (1), 4-ClC(6)H(4) (2), 4-BrC(6)H(4) (3), 4-IC(6)H(4) (4) and dppe = 1,2-bis(diphenylphosphino) ethane and [Ni(4-IC(6)H(4)SO(2)N=CS(2))(PPh(3))(2)] (5), where PPh3 = triphenylphosphine, were obtained in crystalline form by the reaction of the appropriate potassium N-R-sulfonyldithiocarbimate K(2)(RSO(2)N=CS(2)) and dppe or PPh(3) with nickel(II) chloride in ethanol/water. The elemental analyses and the IR, (1)H NMR, (13)C NMR and (31)P NMR spectra are consistent with the formation of the square planar nickel(II) complexes with mixed ligands. All complexes were also characterized by X-ray diffraction techniques and present a distorted cis-NiS(2)P(2) square-planar configuration around the Ni atom. Quantum chemical calculations reproduced the crystallographic structures and are in accord with the spectroscopic data. Rare C-H center dot center dot center dot Ni intramolecular short contact interactions were observed in the complexes 1-5. (C) 2011 Elsevier B. V. All rights reserved.