PAHs, PCDD/Fs, PCBs and HCB in leaves from Brisbane, Australia

The concentrations of SOCs in leaves of an evergreen Australian native tree (Melaleuca leucadendra) and grass collected in Brisbane, Australia were determined. The concentrations of PCDD/Fs and PAHs in the leaf tissue were comparable to those reported for urbanised areas in other industrialised countries. A distinct difference in the compound profiles between the leaves of the two species was observed, with higher concentrations of the lower molecular mass PAHs and PCDD/Fs and lower concentrations of the higher molecular mass PAHs and PCDD/Fs in the Melaleuca leaves relative to the grass leaves. The interspecies differences are explained on the basis of the larger size of the lipophilic compartment (for compounds with low K-OA) and the lower ratio of surface area to volume in the Melaleuca leaves. (C) 2001 Elsevier Science Ltd. All rights reserved.

Analysis of PCBs in soils and sediments by microwave-assisted extraction, headspace-SPME and high resolution gas chromatography with ion-trap tandem mass spectrometry

A procedure for the determination of seven indicator PCBs in soils and sediments using microwave-assisted extraction (MAE) and headspace solid-phase microextraction (HS-SPME) prior to GC-MS/MS is described. Optimization of the HS-SPME was carried out for the most important parameters such as extraction time, sample volume and temperature. The adopted methodology has reduced consumption of organic solvents and analysis runtime. Under the optimized conditions, the method detection limit ranged from 0.6 to 1 ng/g when 5 g of sample was extracted, the precision on real samples ranged from 4 to 21% and the recovery from 69 to 104%. The proposed method, which included the analysis of a certified reference material in its validation procedure, can be extended to several other PCBs and used in the monitoring of soil or sediments for the presence of PCBs.

Effect of Pcbs (Aroclor 1254) on spermatogenesis In Testis Of Mouse

Polychlorinated biphenyls (PCBs) are a group of halogenated aromatic hydrocarbons, synthetic chemicals which do not occur naturally in the environment. PCBs are considered potential endocrine disruptors. They are estrogen-like and anti-androgenic chemicals in the environment contain potentially hazardous effects on male reproductive axis resulting in infertility and other hormonal dependent reproductive functions. These toxic substance cause alteration of the endocrine systems, mimic natural hormones and inhibit the action of hormones. The aim of this study is to examine the effect of Polychlorinated biphenyls (PCBs) on testicular development of male reproductive system in mice. The male mice were randomly assigned to five groups with each group comprising twenty-one members. In those mice were administered 0 μg/kg (control group) and 0.5, 5, 50, 500 μg/kg Aroclor 1254 (treated group) by gavages three time per week. Treatment was carried out for 50 days after which the mouse was sacrificed and the body weight, testicular weight; epedidymis weight, sperm mortality, sperm count and sperm abnormality were taken. However, there was no significant difference in testicular/body weight and epididymis/body weight ratio in treated group compared with the control group. According to the analysis of sperm quality, Aroclor 1254 treated group demonstrated significant increased in sperm mortality in 500 μg/kg; decreased the sperm count in 0.5 μg/kg, 5 μg/kg, 50 μg/kg and 500 μg/kg; and significantly elevate the sperm abnormality in 50 μg/kg and 500 μg/kg compared to the control in a dose-dependent manner. The sex hormone levels in the testes were detected by radio-immunoassay (RIA) method. The levels of testosterone and 17β-estradiol did not reveal significant alteration (p< 0.05) in PCBs treated groups compared to the control in a dose-dependent manner. The testis were obtained and subjected to routine histopathology following exposure to PCBs in supplement diet. The diameter of the seminiferous tubule and the number of Sertoli cells in the treated group increased significantly (p< 0.05) in comparison to the control group. For the spermatogenic cell, the number of germ cell in high concentration decreased significantly (p< 0.05). However, spermatogonia cells in PCB treated group showed non-significant difference (p< 0.05) compared to the control. vii Western blot analysis was used to determine the level of protein between the control and treated group. The level of Proliferating cell nuclear antigen (PCNA) was determined and the results have shown no significant alteration between the treated groups and the control. the level of sex hormone receptor (ER α/β); Androgen receptor (AR) were identified in the testes to detect the proliferative effect induced by PCBs. Statistical analyses of AR, ER α and ER β did not reveal significant difference between the control and the treated groups. In the present study, we continue to investigate adverse effect of Aroclor 1254 and their mechanism on spermatogenesis. The result of Sperm quality and histopathology showed that Aroclor 1254 at low concentration induce inhibitory effect on testicular function of male mouse.

Niveles de plaguicidas organoclorados y PCB´S en el ecosistema marino costero peruano

Se presentan los niveles de residuos de compuestos organoclorados, DDT's y PCB's en organismos y sedimentos marinos evaluados en las áreas costeras de Callao, Pisco. Moliendo e !te, durante el período 1994-1996. Información muy puntual (sedimento) se obtuvo en Talara y Paíta. Los compuestos organoclorados de gran persistencia y toxicidad. mostraron trazas en los organismos y sedimentos evaluados; lo cual nos indica la influencia de descargas residuales de origen netamente antropogénico, con trazas de estos compuestos no obstante haber sido prohibidos en el país desde 1991. Los ni veles hallados se consideran información básica referencial, cuyas concentraciones para el caso de especies. resultaron muy inferiores a las establecidas en normas internacionales (FDA/USA).

Mortality among 24,865 workers exposed to polychlorinated biphenyls (PCBs) in three electrical capacitor manufacturing plants: a ten-year update.

The objective of this analysis was to evaluate mortality among a cohort of 24,865 capacitor-manufacturing workers exposed to polychlorinated biphenyls (PCBs) at plants in Indiana, Massachusetts, and New York and followed for mortality through 2008. Cumulative PCB exposure was estimated using plant-specific job-exposure matrices. External comparisons to US and state-specific populations used standardized mortality ratios, adjusted for gender, race, age and calendar year. Among long-term workers employed 3 months or longer, within-cohort comparisons used standardized rate ratios and multivariable Poisson regression modeling. Through 2008, more than one million person-years at risk and 8749 deaths were accrued. Among long-term employees, all-cause and all-cancer mortality were not elevated; of the a priori outcomes assessed only melanoma mortality was elevated. Mortality was elevated for some outcomes of a priori interest among subgroups of long-term workers: all cancer, intestinal cancer and amyotrophic lateral sclerosis (women); melanoma (men); melanoma and brain and nervous system cancer (Indiana plant); and melanoma and multiple myeloma (New York plant). Standardized rates of stomach and uterine cancer and multiple myeloma mortality increased with estimated cumulative PCB exposure. Poisson regression modeling showed significant associations with estimated cumulative PCB exposure for prostate and stomach cancer mortality. For other outcomes of a priori interest--rectal, liver, ovarian, breast, and thyroid cancer, non-Hodgkin lymphoma, Alzheimer disease, and Parkinson disease--neither elevated mortality nor positive associations with PCB exposure were observed. Associations between estimated cumulative PCB exposure and stomach, uterine, and prostate cancer and myeloma mortality confirmed our previous positive findings.

Effect of water velocity on the uptake of polychlorinatedd biphenyls (PCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers: an assessment of the efficiency of performance reference compounds (PRCs) in river-like flow conditions

One aim of this study is to determine the impact of water velocity on the uptake of indicator polychlorinated biphenyls (iPCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. A second aim is to assess the efficiency of performance reference compounds (PRCs) to correct for the impact of water velocity. SR and LDPE samplers were spiked with 11 or 12 PRCs and exposed for 6 weeks to four different velocities (in the range of 1.6 to 37.7 cm s−1) in river-like flow conditions using a channel system supplied with river water. A relationship between velocity and the uptakewas found for each iPCB and enables to determine expected changes in the uptake due to velocity variations. For both samplers, velocity increases from 2 to 10 cm s−1, 30 cm s−1 (interpolated data) and 100 cm s−1 (extrapolated data) lead to increases of the uptake which do not exceed a factor of 2, 3 and 4.5, respectively. Results also showed that the influence of velocity decreased with increasing the octanol-water coefficient partition (log Kow) of iPCBs when SR is used whereas the opposite effect was observed for LDPE. Time-weighted average (TWA) concentrations of iPCBs in water were calculated from iPCB uptake and PRC release. These calculations were performed using either a single PRC or all the PRCs. The efficiency of PRCs to correct the impact of velocity was assessed by comparing the TWA concentrations obtained at the four tested velocities. For SR, a good agreement was found among the four TWA concentrations with both methods (average RSD b 10%). Also for LDPE, PRCs offered a good correction of the impact of water velocity (average RSD of about 10 to 20%). These results contribute to the process of acceptance of passive sampling in routine regulatory monitoring programs.

O legado das bifenilas policloradas (PCBs)

Polychlorinated biphenyls (PCBs) are a class of 209 chemical compounds with the molecular formula C12H10-nCl n, where 1 <= n <= 10. They were commercially produced as complex mixtures for various uses, being employed principally as dielectric fluids in capacitors and transformers. They are not easily degraded due their chemical and physical stability and tend to bioaccumulate in the organisms. After the discovery of their xenobiotic activity, restrictions were imposed for their use, as well as for their discards. Nowadays the development of recovery processes for contaminated environment urges to be done due to the extension of reached areas.

Estudo do coeficiente de partição octanol-água de bifenilas policloradas (PCBs) utilizando parâmetros topológicos

A model based on chemical structure was developed for the accurate prediction of octanol/water partition coefficient (K OW) of polychlorinated biphenyls (PCBs), which are molecules of environmental interest. Partial least squares (PLS) was used to build the regression model. Topological indices were used as molecular descriptors. Variable selection was performed by Hierarchical Cluster Analysis (HCA). In the modeling process, the experimental K OW measured for 30 PCBs by thin-layer chromatography - retention time (TLC-RT) has been used. The developed model (Q² = 0,990 and r² = 0,994) was used to estimate the log K OW values for the 179 PCB congeners whose K OW data have not yet been measured by TLC-RT method. The results showed that topological indices can be very useful to predict the K OW.

AVALIAÇÃO DAS NORMAS DE ENSAIO APLICADAS NA QUANTIFICAÇÃO DE PCBs EM ÓLEO ISOLANTE

Polychlorinated biphenyls (PCBs) were widely used between 1940 and 1970 as an insulating fluid for transformers and capacitors. However, they are bioaccumulative and potentially carcinogenic and, according to the 2001 Stockholm Convention, must be eliminated by 2025. In Brazil, they have been gradually eliminated but contaminated equipment remains. The Brazilian official standard for PCBs content in oil analysis is the ABNT NBR 13882 and there is also the IEC 61619 International Standard, both based on GC-ECD quantification. This work identified the inefficiency of these analytical methods and highlights potential failures which generated discrepancies on quantification of these contaminants. It was observed that the IEC 61619 is superior to ABNT NBR 13882 in analytical criteria, but has problems with the inefficiency of the adsorbent material used in pretreatments for removal of oxidation products from oil where these adsorbents adsorbed some PCBs molecules, causing errors in quantification.

Investigations into the determination of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by capillary gas chromatography

Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.

Tratamento de materiais contaminados com bifenilas policloradas (PCBS) via extração convencional e fluído supercrítico

The decontamination of the materials has been subject of some studies. One of the factors that it increases the pollution is the lack of responsibility in the discarding of toxic trash, as for example the presence of PCB (Polychlorinated Biphenyls) in the environment. In the Brazilian regulations, the material contaminated with PCB in concentrations higher than 50 ppm must be stored in special places or destroyed, usually by incineration in plasma furnace with dual steps. Due to high cost of the procedure, new methodologies of PCBs removal has been studied. The objective of this study was to develop an experimental methodology and analytical methodology for quantification of removal of PCBs through out the processes of extractions using supercritical fluid and Soxhlet method, also technical efficiency of the two processes of extraction, in the treatment of contaminated materials with PCBs. The materials studied were soils and wood, both were simulated contamination with concentration of 6.000, 33.000 and 60.000 mg of PCB/ kg of materials. Soxhlet extractions were performed using 100 ml of hexane, and temperature of 180 ºC. Extractions by fluid supercritical were performed at conditions of 200 bar, 70°C, and supercritical CO2 flow-rate of 3 g/min for 1-3 hours. The extracts obtained were quantified using Gas chromatography-mass spectrometry (GC/MS). The conventional extractions were made according to factorial experimental planning technique 22, with aim of study the influence of two variables of process extraction for the Soxhlet method: contaminant concentration and extraction time for obtain a maximum removal of PCB in the materials. The extractions for Soxhlet method were efficient for extraction of PCBs in soil and wood in both solvent studied (hexane and ethanol). In the experimental extraction in soils, the better efficient of removal of PCBs using ethanol as solvent was 81.3% than 95% for the extraction using hexane as solvent, for equal time of extraction. The results of the extraction with wood showed statistically it that there is not difference between the extractions in both solvent studied. The supercritical fluid extraction in the conditions studied showed better efficiency in the extraction of PCBs in the wood matrix than in soil, for two hours extractions the obtain percentual of 43.9 ± 0.5 % for the total of PCBs extracted in the soils against 95.1 ± 0,5% for the total of PCBs extracted in the wood. The results demonstrated that the extractions were satisfactory for both technical studied

Bioaccumulation of chlorinated pesticides and PCBs in the tropical freshwater fish Hoplias malabaricus: Histopathological, physiological, and immunological findings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contamination by chlorinated pesticides, PCBs and PBDEs in Atlantic spotted dolphin (Stenella frontalis) in western South Atlantic

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Residues of organochlorine pesticides and PCBs in some Brazilian municipal solid waste compost

Persistent organic pollutants (POPs), organochlorine pesticides and polychlorinated biphenyls (PCBs), listed as per the Stockholm Convention (α -HCH, β -HCH, γ -HCH, p,p′-DDT, o,p′-DDT, p,p′-DDD, p,p′-DDE, aldrin, endrin, dieldrin, PCBs 28, 52, 118, 138, 153, and 180), were analyzed in municipal solid waste (MSW) compost samples from three different Brazilian composting plants located in three São Paulo State cities: Araras, Araraquara and São Paulo (Vila Leopoldinha). Quantitative and qualitative analyses were carried out using gas chromatography electron capture detection (GC-ECD) and gas chromatography mass spectrometry (GC-MS) (Ion Trap, electron impact ionization), respectively. The samples were analyzed in triplicate and the target POPs were not detected by GC-ECD. Twelve pollutants were identified in two samples when qualitative analysis (GC-MS) was used (β -HCH, γ -HCH, p,p′-DDT, o,p′-DDT, p,p′-DDD, and p,p′-DDE, PCBs 28, 118, 138, 153 and 180). The composting process has advantages such as urban solid waste reduction and landfill life-span increase, however the MSW compost quality, which can be utilized for agricultural purposes, should be evaluated and be controlled. This kind of study is the first step in making available information to answer questions regarding MSW compost for sustainable agricultural use, such as the pollutants accumulation in soil and in groundwater, and plants uptake. Copyright © Taylor & Francis Group, LLC.