高山松的群体历史及其适应性进化研究

物种形成一直以来是进化生物学的一个中心议题。因为杂交能够快速创造出新的遗传变异和提高基因组重组率，加速物种形成和适应性进化，所以杂交物种形成是其重要的组成部分。但是直到最近几年，人们才逐渐意识到同倍体杂种形成的重要性和普遍性。此外，人工杂交种群结果证实了杂种的适应性起源于亲本基因的超亲分离现象，这些基因之间通过加和效应或上位效应相互连锁，并在杂种后代中逐渐固定，因此，探讨维持这种适应机制的杂种的连锁不平衡模式就显得尤为重要。到目前为止，关于自然杂种的核苷酸多态性和连锁不平衡结构的报道非常稀见，对杂种的进化历史知之更少。高山松能生长于亲本种不能正常繁殖生长的青藏高原上，这种极端环境为杂种的适应性进化和与亲本的生态隔离造就了绝佳的条件，其生态和生殖的稳定性极大地方便了我们研究植物物种形成和适应性进化的遗传机理，对高山松开展的生态学、遗传学的系列分析已使高山松成为同倍体杂种形成的经典范例。 该论文通过随机挑选7个核基因位点对5个高山松群体、3个油松群体和3个云南松群体的164个大配子体单倍体基因组进行了核苷酸多态性分析。研究发现：所有基因座位的单倍型组成和基因谱系的拓扑结构都支持高山松的多次杂交起源。高山松的平均核苷酸多态性与油松相当，θW达到0.0107;比云南松高出一倍;高于已报道的裸子植物类群遗传变异水平。高山松如此高的遗传多态性与其杂交特性和有效群体大有关。我们运用分子钟和共祖模拟分析，推测出高山松的有效群体为7.32 x 105。等位基因共祖时间模拟分析发现，杂交过程早于青藏高原的隆升，也即是说，在杂种稳定成种以前，两个亲本种之间存在广泛的渐渗杂交。此外，高山松杂种的群体间分化严重，并且在不同的群体中，我们找到了多个偏离中性的基因座位。由此说明，高山松复杂的进化历史和适应的策略区域化。 在显著偏离中性的基因座位上，选取群体历史清晰的高山松群体，对其全基因序列多态性和连锁不平衡结构进行了深入调查，以期找到选择作用位点或区域。Ara-like和Dhn1两个基因在高山松与亲本之间都没有发现固定变异。在高山松中，Ara-like基因和Dhn1基因核苷酸多态性式样和连锁不平衡结构存在明显差异，这说明在两个基因上选择作用的程度和方向不尽相同。 我们对Dhn1基因的多态性分布、LD结构和中性偏离水平进行了分析，结果表明，该基因可能在PdNX和PdLZ群体中受到平衡选择的作用。从Dhn1基因谱系结构可以看出有两种来源的等位基因造成这种平衡多态性，一种属于祖先类型，另一种是从云南松继承衍生而来。这两种等位基因之间的分化很大，极有可能造成编码蛋白的亚功能化。事实上，Dhn1编码的脱水蛋白在植物对环境的抗逆过程中发挥着重要作用。由此我们推测高山松在高海拔极端环境中的适应性进化与Dhn1基因的平衡作用有关。 对Ara-like和Dhn1基因进行HKA检测，结果表明，与Dhn1基因相比，在Ara-like基因上，双维管束亚属与单维管束亚属之间存在显著分化，沉默突变位点的分化Ksil达到了0.1392，远远高于平均水平0.0508;在双维管束亚属共发现了43个固定突变位点，其中有6个能导致氨基酸突变，它们有可能导致了Ara-like基因功能的分化。结合裸子植物近缘物种间共享多态性的普遍性，我们推测Ara-like基因可能在单维管束亚属中的进化速率加快，暗示其在单维管束亚属中的适应性进化。 最后，基因内连锁不平衡分析结果显示，随机筛选的基因座位之间不存在连锁不平衡。高山松平均的基因内LD程度非常低，仅有18%的信息位点之间显著连锁。平均基因内LD在油松和高山松中的衰减速率很快，尤其在杂种中下降最快，在不到200bp���内就降到0.1以下。 LD的结果印证了高山松的有效群体大和多次起源特性。另外，我们也怀疑杂交物种形成过程中染色体组的重组和重排频繁发生，也是造成自然杂种现有群体的LD水平低的一个主要原因。 通过LD衰减曲线估计高山松的平均单位重组率,比亲本油松高17倍，比云南松高45倍。这个结果表明，杂种共适应的基因间要维持超亲分离，需要强烈的自然选择压力，才能保持它们之间的连锁不平衡。

Electronic states of trans-polyacetylene, poly(p-phenylene vinylene) and sp-hybridised carbon species in amorphous hydrogenated carbon probed by resonant Raman scattering

Inclusions of sp-hybridised, trans-polyacetylene [trans-(CH)x] and poly(p-phenylene vinylene) (PPV) chains are revealed using resonant Raman scattering (RRS) investigation of amorphous hydrogenated carbon (a-C:H) films in the near IR – UV range. The RRS spectra of trans-(CH)x core Ag modes and the PPV CC-H phenylene mode are found to transform and disperse as the laser excitation energy ћωL is increased from near IR through visible to UV, whereas sp-bonded inclusions only become evident in UV. This is attributed to ћωL probing of trans-(CH)x chain inhomogeneity and the distribution of chains with varying conjugation length; for PPV to the resonant probing of phelynene ring disorder; and for sp segments, to ћωL probing of a local band gap of end-terminated polyynes. The IR spectra analysis confirmed the presence of sp, trans-(CH)x and PPV inclusions. The obtained RRS results for a-C:H denote differentiation between the core Ag trans-(CH)x modes and the PPV phenylene mode. Furthermore, it was found that at various laser excitation energies the changes in Raman spectra features for trans-(CH)x segments included in an amorphous carbon matrix are the same as in bulk trans-polyacetylene. The latter finding can be used to facilitate identification of trans-(CH)x in the spectra of complex carbonaceous materials.

Are combination forecasts of S&P 500 volatility statistically superior?

Forecasting volatility has received a great deal of research attention, with the relative performances of econometric model based and option implied volatility forecasts often being considered. While many studies find that implied volatility is the pre-ferred approach, a number of issues remain unresolved, including the relative merit of combining forecasts and whether the relative performances of various forecasts are statistically different. By utilising recent econometric advances, this paper considers whether combination forecasts of S&P 500 volatility are statistically superior to a wide range of model based forecasts and implied volatility. It is found that a combination of model based forecasts is the dominant approach, indicating that the implied volatility cannot simply be viewed as a combination of various model based forecasts. Therefore, while often viewed as a superior volatility forecast, the implied volatility is in fact an inferior forecast of S&P 500 volatility relative to model-based forecasts.

The jump component of S&P 500 volatility and the VIX index

Much research has investigated the differences between option implied volatilities and econometric model-based forecasts. Implied volatility is a market determined forecast, in contrast to model-based forecasts that employ some degree of smoothing of past volatility to generate forecasts. Implied volatility has the potential to reflect information that a model-based forecast could not. This paper considers two issues relating to the informational content of the S&P 500 VIX implied volatility index. First, whether it subsumes information on how historical jump activity contributed to the price volatility, followed by whether the VIX reflects any incremental information pertaining to future jump activity relative to model-based forecasts. It is found that the VIX index both subsumes information relating to past jump contributions to total volatility and reflects incremental information pertaining to future jump activity. This issue has not been examined previously and expands our understanding of how option markets form their volatility forecasts.

meso-Porphyrinylphosphine Oxides: Mono- and Bidentate Ligands for Supramolecular Chemistry and the Crystal Structures of Monomeric [10,20-Diphenylporphyrinatonickel(II)-5,15-diyl]-bis-[P(O)Ph2] and Polymeric Self-Coordinated ([10,20-Diphenylporphyrinatozinc(II)-5,15-diyl]-bis-[P(O)Ph2])

A series of porphyrins substituted in one or two meso-positions by diphenylphosphine oxide groups has been prepared by the palladium catalysed reaction of diphenylphosphine or its oxide with the corresponding bromoporphyrins. Compounds {MDPP-[P(O)Ph2]n} (M = H2, Ni, Zn; H2DPP = 5,15-diphenylporphyrin; n = 1, 2) were isolated in yields of 60-95%. The reaction is believed to proceed via the conventional oxidative addition, phosphination and reductive elimination steps, as the stoichiometric reaction of η1-palladio(II) porphyrin [PdBr(H2DPP)(dppe)] (H2DPP = 5,15-diphenylporphyrin; dppe = 1,2-bis(diphenylphosphino)ethane) with diphenylphosphine oxide also results in the desired mono-porphyrinylphosphine oxide [H2DPP-P(O)Ph2]. Attempts to isolate the tertiary phosphines failed due to their extreme air-sensitivity. Variable temperature 1H NMR studies of [H2DPP-P(O)Ph2] revealed an intrinsic lack of symmetry, while fluorescence spectroscopy showed that the phosphine oxide group does not behave as a "heavy atom" quencher. The electron withdrawing effect of the phosphine oxide group was confirmed by voltammetry. The ligands were characterised by multinuclear NMR and UV-visible spectroscopy as well as mass spectrometry. Single crystal X-ray crystallography showed that the bis(phosphine oxide) nickel(II) complex {[NiDPP-[P(O)Ph2]2} is monomeric in the solid state, with a ruffled porphyrin core and the two P=O fragments on the same side of the average plane of the molecule. On the other hand, the corresponding zinc(II) complex formed infinite chains through coordination of one Ph2PO substituent to the neighbouring zinc porphyrin through an almost linear P=O---Zn unit, leaving the other Ph2PO group facing into a parallel channel filled with disordered water molecules. These new phosphine oxides are attractive ligands for supramolecular porphyrin chemistry.

Mechanism of p-nitrophenol adsorption from aqueous solution by HDTMA+-pillared montmorillonite : implications for water purification

HDTMA+ pillared montmorillonites were obtained by pillaring different amounts of the surfactant hexadecyltrimethylammonium bromide (HDTMAB) into sodium montmorillonite (Na-Mt) in an aqueous solution. The optimum conditions and batch kinetics of sorption of p-nitrophenol from aqueous solutions were reported. The solu-tion pH had a very important effect on the sorption of p-nitrophenol. The maximum p-nitrophenol absorption/adsorption occurs when solution pH (7.15~7.35) is approx-imately equal to the pKa (7.16) of the p-nitrophenol ion deprotonation reaction. X-ray diffraction analysis showed that surfactant cations had been pillared into the interlayer and the p-nitrophenol affected the arrangement of surfactant. With the increased con-centration of surfactant cations, the arrangement of HDTMA+ within the clay inter-layer changes and the sorption of p-nitrophenol increases. HDTMA+ pillared mont-morillonites are more effective than Na-Mt for the adsorption of p-nitrophenol from aqueous solutions. The Langmuir, Freundlich and dual-mode sorption were tested to fit the sorption isotherms.

Characterisation of organoclays and adsorption of p-nitrophenol : environmental application

Organoclays were synthesised through ion exchange of a single surfactant for sodium ions, and characterised by a range of method including X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM). The change in surface properties of montmorillonite and organoclays intercalated with the surfactant, tetradecyltrimethylammonium bromide (TDTMA) were determined using XRD through the change in basal spacing and the expansion occurred by the adsorbed p-nitrophenol. The changes of interlayer spacing were observed in TEM. In addition, the surface measurement such as specific surface area and pore volume was measured and calculated using BET method, this suggested the loaded surfactant is highly important to determine the sorption mechanism onto organoclays. The collected results of XPS provided the chemical composition of montmorillonite and organoclays, and the high-resolution XPS spectra offered the chemical states of prepared organoclays with binding energy. Using TGA and FT-IR, the confirmation of intercalated surfactant was investigated. The collected data from various techniques enable an understanding of the changes in structure and surface properties. This study is of importance to provide mechanisms for the adsorption of organic molecules, especially in contaminated environmental sites and polluted waters.