A Brazilian version of the "Children's Interview for Psychiatric Syndromes" (ChIPS)

OBJETIVE: The advance of research in child and adolescent psychiatry in Brazil heavily depends on the existence of instruments for the investigation of psychiatric syndromes adapted to Brazilian Portuguese. METHODS: This article describes a careful process of translation of the Children's Interview for Psychiatric Syndromes for the purpose of use in research in Brazil. The Children's Interview for Psychiatric Syndromes has a version for parents (P-ChIPs) and a version for children (ChIPS). In this article, the sections of P-ChIPS referring to attention-deficit hyperactivity disorder, oppositional-defiant disorder, conduct disorder, mania/hypomania, anorexia nervosa, bulimia nervosa and psychotic disorders were translated to Brazilian Portuguese. The sections of the ChIPS referring to substance use disorders, social anxiety disorder, specific phobias, obsessive-compulsive disorder, generalized anxiety disoder, separation anxiety disorder, post-traumatic disorders and depression/dysthimia were also adapted. Each section was translated by two independent translators and later discussed in a committee composed of experts in the field of Psychiatry and a professional of the field of linguistics. RESULT: A final version containing an interview for the main psychiatric syndromes was defined. CONCLUSION: The translated P-ChIPS is a helpful instrument in children and adolescent clinical evaluation.

Desempenho neuropsicológico de tipos de transtorno do déficit de atenção e hiperatividade (TDAH) em tarefas de atenção visual

OBJETIVO: Comparar o desempenho dos tipos de TDAH em tarefas de seletividade, sustentação e atenção alternada, considerando tempo médio de reação, número de erros por ação e número de erros por omissão em teste computadorizado de atenção visual (TAVIS-III). MÉTODOS: Cento e duas crianças e adolescentes de duas escolas particulares e uma escola pública da cidade do Rio de Janeiro, com idades entre 6 e 17 anos com diagnóstico de TDAH, segundo DSM-IV, foram submetidas ao TAVIS-III. A separação por grupos respeitou os tipos determinados por entrevista semi-estruturada (P-CHIPS), e os resultados foram comparados levando-se em consideração o fator grupo. RESULTADOS: O tipo combinado (C) revelou-se o mais comum (n = 65; 63,7%), seguido pelo predominantemente desatento (D) (n = 32; 31,4%). O tipo predominantemente hiperativo-impulsivo (HI) foi excluído das análises estatísticas em virtude da baixa freqüência. O desempenho do grupo C revelou-se inferior apenas em tarefa de atenção sustentada, no que tange ao número de erros por ação e tempo médio de reação (p < 0,05), ambos maiores quando comparados ao grupo D. CONCLUSÃO: Apenas em tarefa de atenção visual por tempo mais prolongado, o tipo combinado revelou diferenças significativas em relação ao grupo desatento.

Biomimetic superhydrophobic surfaces patterned with wettable spots as implantable chips for in vivo high-content 3D biomaterials response assessment

"Tissue engineering: part A", vol. 21, suppl. 1 (2015)

Coarse Aggregate Gradations for P.C. Concrete, MLR-94-8, 1995

The effect of coarse aggregate gradation and cement content on strength of concrete was studied. Concrete made of Iowa Department of Transportation Standard Mix C-3 and Aggregate Gradation No. 3 were selected as reference. C-3 proportions were used for mixes #1 and #2. C-3 mix with 10% reduction of the cement content was used for mix #3. C-3 mix with 20% reduction of the cement content was used for mix #4. On the other hand, mix #1 used coarse aggregate of Gradation No. 3, while mixes #2, #3, and #4 used coarse aggregate mix of 65% concrete stone and 35% 3/8 in. chips. It was found that strengths of portland cement concrete decrease with decreasing cement factor. On the other hand, 35% of chip replacement for coarse aggregate increases strengths of concrete. By replacing 35% of coarse aggregate with chips, one could reduce cement factor 10% and achieve equivalent strengths.

Studying oil absorption in restructured potato chips

The oil-absorption capacity of different restructured potato chips during deep-fat frying was investigated. Low-leach potato flake was chosen as the major ingredient, whereas native and pregelatinized potato starches were studied as complementary ingredients. Results showed that off absorption increased significantly when reducing product thickness in all products. Interestingly, it was found that the product containing native potato starch as an ingredient picked up the lowest amount of on when sheeted into a thick chip, whereas it absorbed the largest amount of oil when sheeted into a thin chip. Those findings were mainly attributed to crust microstructure development as revealed by electron microscopy and confocal microscopy.

Frying of potato chips in a blend of canola oil and palm olein: changes in levels of individual fatty acids and tocols

The changes occurring in the levels of nutritionally relevant oil components were assessed during repeated frying of potato chips in a blend of palm olein and canola oil (1:1 w/w). The blend suffered minimal reductions in omega-3 and omega-6 polyunsaturated fatty acids. There was no significant difference between the fatty acid composition of the oil extracted from the product and that of the frying medium, in all three cases. The blend also contained a significant amount of tocols which add a nutritional value to the oil. The concentration of the tocols was satisfactorily retained over the period of oil usage, in contrast to the significant loses observed in the case of the individual oils. The blend also performed well when assessed by changes in total polar compounds, free fatty acids, p-anisidine value. When fried in used oil, the product oil content increased progressively with oil usage time. This study shows that blended frying oils can combine good stability and nutritional quality

Fast batch injection analysis of H(2)O(2) using an array of Pt-modified gold microelectrodes obtained from split electronic chips

A fast and robust analytical method for amperometric determination of hydrogen peroxide (H(2)O(2)) based on batch injection analysis (BIA) on an array of gold microelectrodes modified with platinum is proposed. The gold microelectrode array (n = 14) was obtained from electronic chips developed for surface mounted device technology (SMD), whose size offers advantages to adapt them in batch cells. The effect of the dispensing rate, volume injected, distance between the platinum microelectrodes and the pipette tip, as well as the volume of solution in the cell on the analytical response were evaluated. The method allows the H(2)O(2) amperometric determination in the concentration range from 0.8 mu mol L(-1) to 100 mu mol L(-1). The analytical frequency can attain 300 determinations per hour and the detection limit was estimated in 0.34 mu mol L(-1) (3 sigma). The anodic current peaks obtained after a series of 23 successive injections of 50 mu L of 25 mu mol L(-1) H(2)O(2) showed an RSD < 0.9%. To ensure the good selectivity to detect H(2)O(2), its determination was performed in a differential mode, with selective destruction of the H(2)O(2) with catalase in 10 mmol L(-1) phosphate buffer solution. Practical application of the analytical procedure involved H(2)O(2) determination in rainwater of Sao Paulo City. A comparison of the results obtained by the proposed ampermetric method with another one which combines flow injection analysis (FIA) with spectrophotometric detection showed good agreement. (C) 2011 Elsevier B.V. All rights reserved.

Loss in tocopherols and oxidative stability during the frying of frozen cassava chips

The present study was aimed at verifying tocopherols losses and oxidative stability changes in vegetable oils used in discontinuous frying. The frying of frozen cassava chips was carried out in a household electric frying pan, where the oil was heated to a temperature of 180 degrees C for 25 hours, with fresh oil replacement. The results obtained from the analytical determinations were submitted to variance analysis, in a factorial scheme, using a completely randomized design, making it possible to determine the influence of the type of oil and frying times on changes in the oil. The data show that the smallest changes occur in palm oil, which is more saturated. For sunflower and cottonseed oils, which are more unsaturated, there was a clear decrease in both tocopherol concentration and oxidative stability.

Arrays of gold microelectrodes made from split integrated circuit chips

A simple and inexpensive way to fabricate arrays of gold microelectrodes is proposed. Integrated circuit chips are sawed through their middle, normal to the longest axis, leading to destruction of the silicon circuit and rupture of the gold wires that interconnect it with the external terminals. Polishing the resulting rough surface converts the tips of the wires embedded in the chip halves into arrays of gold microdisks of about 25 mu m diameter. The number of active microelectrodes (MEs), of an array depends on the number of pins in the chip, n, being typically (n/2)-4. These MEs can be used individually or externally interconnected in any combination. X-ray images of the chips and micrographs of the resulting surface of the polished arrays have revealed variable distances between neighbor MEs, which are, however, larger than 10 times the radius of the disks. This feature of the MEs prevents diffusional cross-talk between electrodes. The use of these microdisk electrodes for analytical purposes exhibits sigmoidal voltammograms, and chronoamperometric experiments confirm the nonlinear i vs. t(1/2) plots, typical for processes where radial diffusion prevails. Satisfactory uniformity was observed for the response of each electrode of an array, indicating similarity of geometry and disk areas. The potentialities of these MEs were demonstrated by the determination of cadmium at ppb levels using square wave voltammetry with preconcentration. Due to the relative ease with which these MEs can be manufactured and their good performance in (chemical) analysis, wide applications in electrochemistry and electroanalysis is envisioned.

Flow-through cell based on an array of gold microelectrodes obtained from modified integrated circuit chips

The construction of a flow-through cell incorporating an array of gold microelectrodes is described and its application to flow injection analysis with amperometric detection is presented, Simple modification of almost any conventional integrated circuit chip, used as an inexpensive source of pre-assembled gold micro-wires, leads to the rapid and successful preparation of arrays of 8-48 elements, the polymeric encapsulation material from the top face of the chip is removed by abrasion until the gold micro-mires (used to interconnect the silicon circuit to the external contact pins of the chip) are disrupted and their transversal (elliptical) sections become exposed. Once polished, the flat and smooth top surface of the gold microelectrode-array chip (MEAC) is provided with a spacer and fitted under pressure against an acrylic block with the reference and auxiliary electrodes, to form the electrochemical (thin-layer) flow cell, while the contact pins are plugged into a standard IC socket, This design ensures autonomous electric contact with each electrode and allows fast dismantling for polishing or substitution, the performance of flow cells with MEACs was investigated utilizing the technique of reverse pulse amperometry without oxygen removal, A method was established for the determination of the copper concentration in sugar cane spirit, regulated by law for beverages, Samples from industrial producers and small-scale (alembic) brewers were compared, With a 24 MEAC, a detection limit of 30 mu g I-l of copper (4.7 x 10(-7) mol l(-1) of Cu-II for 100 mu l injections) was calculated, Routine operation was established at a frequency of 60-90 determinations per hour, Intercomparison with atomic absorption spectrometric determinations resulted in excellent agreement.

Perfil de ácidos graxos em batatas Chips comercializadas em são José do Rio Preto - Brasil

The objective this study was to evaluate the fatty acids profile of samples of chips potato marketed in the city of São Jose do Rio Preto-SP. We collected samples of 10 brands of chips potato, obtained from 3 different batches. The fatty acids profile was obtained by gas chromatography, with peak identified by retention times with standards of methyl esters and the results calculated and expressed as g/100g of the sample. The fatty acids profile in chips potatoes from different brands were on average 39.22% for saturated fatty acids, 39.64% for monounsaturated, 18.60% for polyunsaturated and 2.43% for trans fatty acids.

Strategies for single nucleotide polymorphism (SNP) genotyping to enhance genotype imputation in Gyr (Bos indicus) dairy cattle: Comparison of commercially available SNP chips

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alkaline sulfite/anthraquinone pretreatment followed by disk refining of Pinus radiata and Pinus caribaea wood chips for biochemical ethanol production

BACKGROUND: Alkaline sulfite/anthraquinone (ASA) cooking of Pinus radiata and Pinus caribaea wood chips followed by disk refining was used as a pretreatment for the production of low lignified and high fibrillated pulps. The pulps produced with different delignification degrees and refined at different energy inputs (250, 750 and 1600 Wh) were saccharified with cellulases and fermented to ethanol with Saccharomyces cerevisiae using separated hydrolysis and fermentation (SHF) or semi-simultaneous saccharification and fermentation (SSSF) processes. RESULTS: Delignification of ASA pulps was between 25% and 50%, with low glucans losses. Pulp yield was from 70 to 78% for pulps of P. radiata and 60% for the pulp of P. caribaea. Pulps obtained after refining were evaluated in assays of enzymatic hydrolysis. Glucans-to-glucose conversion varied from 20 to 70%, depending on the degree of delignification and fibrillation of the pulps. The best ASA pulp of P. radiata was used in SHF and SSSF experiments of ethanol production. Such experiments produced maximum ethanol concentration of 20 g L-1, which represented roughly90% of glucose conversion and an estimated amount of 260 L ethanol ton(-1) wood. P. caribaea pulp also presented good performance in the enzymatic hydrolysis and fermentation but, due to the low amount of cellulose present, only 140 L ethanol would be obtained from each ton of wood. CONCLUSION: ASA cooking followed by disk refining was shown to be an efficient pretreatment process, which generated a low lignified and high-fibrillated substrate that allowed the production of ethanol from the softwoods with high conversion yields. (C) 2012 Society of Chemical Industry