Open Hardware

Presentació sobre la creació de la placa Arduino, i els projectes que s'han fet arreu amb aquesta placa

Projeto de telefonia celular GSM baseada em open source e open hardware para comunidades rurais isoladas e carentes na região amazônica: estudo de caso em Itabocal – Irituia – Pará

Este trabalho teve como proposta realizar pesquisa das tecnologias existentes para telefonia e integração das mesmas para concepção de um sistema inovador e projetado para a realidade Amazônida. O trabalho incluiu avaliar a implementação de um sistema GSM open source / open hardware de custo zero para a população (telefonia celular gratuita) em comunidades rurais na Amazônia, com enfoque nas comunidades isoladas e carentes onde geralmente não há cobertura celular de operadoras comerciais, devido a falta de estímulo do governo e/ou interesse comercial de prover telefonia para essas populações mais pobres.

Realizzazione di un sistema di automazione domotica con tecnologia open-hardware

Il termine Domotica deriva dall’unione dei termini domus e robotics e spazia oltre alle competenze in ambito informatico ed elettronico, avvalendosi dell’architettura e di determinati campi dell’ingegneria come: energetica, edile, dell’ automazione, elettrotecnica, delle telecomunicazioni. La Domotica agevola gli aspetti della quotidianità all’interno dell’ambiente casalingo o, più in generale, di ambienti antropizzati. Questa tesi ha l’intento di spiegare come può essere realizzato un sistema domotizzato casalingo utilizzando dispositivi open-hardware. Inizialmente verranno messi in chiaro i concetti chiave generici di un sistema domotico e verranno discussi i prodotti attualmente in commercio e verrà fatta una piccola introduzione sul concetto di open-hardware. Successivamente verrà discusso il sistema realizzato dandone una panoramica, si esaminerà la strutturazione sia software che hardware e le tecnologie ed i dispositivi utilizzati, per poi enucleare casi d’uso. A seguire le conclusioni.

A proposal for an Internet of Things-based monitoring system composed by low capability, open source and open hardware devices

The Internet of Things makes use of a huge disparity of technologies at very different levels that help one to the other to accomplish goals that were previously regarded as unthinkable in terms of ubiquity or scalability. If the Internet of Things is expected to interconnect every day devices or appliances and enable communications between them, a broad range of new services, applications and products can be foreseen. For example, monitoring is a process where sensors have widespread use for measuring environmental parameters (temperature, light, chemical agents, etc.) but obtaining readings at the exact physical point they want to be obtained from, or about the exact wanted parameter can be a clumsy, time-consuming task that is not easily adaptable to new requirements. In order to tackle this challenge, a proposal on a system used to monitor any conceivable environment, which additionally is able to monitor the status of its own components and heal some of the most usual issues of a Wireless Sensor Network, is presented here in detail, covering all the layers that give it shape in terms of devices, communications or services.

The Emergence of Open Hardware Phenomena in Different Technological Environments

Dannie Jost gave an introductory presentation on the emergence on open hardware phenomena, including synthetic biology and other technological environments at the HEPTech Workshop on Open Hardware on June 13 held at the GSI, Darmstadt (Germany). The workshop was organized by CERN and GSI. This event addressed the OSHW phenomenon and its implications for academia and industry with special attention to knowledge and technology transfer issues. Consideration was given to the various aspects of open source hardware development, and how these are dealt with in academia and industry. Presentations from legal experts, academics, practitioners and business provided input for the discussions and exchange of ideas.

Challenges to the Patent System in face of Open Hardware

Dannie Jost gave a presentation outlining some of the challenges to the patent system presented by open source hardware at the "Open Knowledge Festival", under the topic stream treating open design, hardware, manufacturing and making; September 19, 2012; Helsinki, Finland. This topic stream generated considerable discussion, and it serves to educate an audience that is usually very adverse to patents and copyright, and helps the researcher understand the issuing conflicts surrounding emerging technologies, in particular digital technologies, and the maker movement (digitally enabled).

Utilization of remote experimentation in mobile devices for education

In this paper the authors intend to demonstrate the utilization of remote experimentation (RE) using mobile computational devices in the Science areas of the elementary school, with the purpose to develop practices that will help in the assimilation process of the subjects taught in classroom seeking to interlink them with the daily students? activities. Allying mobility with RE we intend to minimize the space-temporal barrier giving more availability and speed in the information access. The implemented architecture utilizes technologies and freely distributed softwares with open code resources besides remote experiments developed in the Laboratory of Remote Experimentation (RExLab) of Federal University of Santa Catarina (UFSC), in Brazil, through the physical computation platform of the ?open hardware of construction of our own. The utilization of open code computational tools and the integration of hardware to the 3D virtual worlds, accessible through mobile devices, give to the project an innovative face with a high potential for reproducibility and reusability.

Creation and Validation of Chronojump-Boscosystem: A Free Tool to Measure Vertical Jumps

Measuring the height of the vertical jump is an indicator of the strength and power of the lower body. The technological tools available to measure the vertical jump are black boxes and are not open to third-party verification or adaptation. We propose the creation of a measurement system called Chronojump-Boscosystem, consisting of open hardware and free software. Methods: A microcontroller was created and validated using a square wave generator and an oscilloscope. Two types of contact platforms were developed using different materials. These platforms were validated by the minimum pressure required for activation at different points by a strain gauge, together with the on/off time of our platforms in respect of the Ergojump-Boscosystem platform by a sample of 8 subjects performing submaximal jumps with one foot on each platform. Agile methodologies were used to develop and validate the software. Results: All the tools fall under the free software / open hardware guidelines and are, in that sense, free. The microcontroller margin of error is 0.1%. The validity of the fiberglass platform is 0.95 (ICC). The management software contains nearly 113.000 lines of code and is available in 7 languages.

Learning Resource Coursework - Team Sigma

We have created a slideshow on Open Source, and have created a reference list and poster for it.

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Desenvolvimento de um sistema de instrumentação de medição de vibração mecânica em máquina rotativas, em tempo real, embarcado em FPGA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de uma plataforma aberta de robô móvel para propósitos gerais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of low cost technology for the management of irrigation in organic orchards

Throughout history, humans have cyclically return to their old traditions such as the organic orchards. Nowadays, these have been integrated into the modern cities and could supply fresh vegetables to the daily food improving human health. Organic orchards grow crops without pesticides and artificial fertilizers thus, they are respectful with the environment and guarantee the food's safety . In modern society, the application of new technology is a must, in this case to obtain an efficient irrigation. In order to monitor a proper irrigation and save water and energy, soil water content probes are used to measure soil water content. Among them, capacitive probes ,monitored with a specific data logger, are typically used. Most of them, specially the data loggers, are expensive and in many cases are not used. In this work, we have applied the open hardware Arduino to build and program a low cost datalogger for the programming of irrigation in an experimental organic orchard. Results showed that the application of such as low cost technology, which is easily available in the market and easy to understand, everyone can built and program its own device helping in managing water resources in organic orchards .

Development and programming of Geophonino: A low cost Arduino-based seismic recorder for vertical geophones

The commercial data acquisition systems used for seismic exploration are usually expensive equipment. In this work, a low cost data acquisition system (Geophonino) has been developed for recording seismic signals from a vertical geophone. The signal goes first through an instrumentation amplifier, INA155, which is suitable for low amplitude signals like the seismic noise, and an anti-aliasing filter based on the MAX7404 switched-capacitor filter. After that, the amplified and filtered signal is digitized and processed by Arduino Due and registered in an SD memory card. Geophonino is configured for continuous registering, where the sampling frequency, the amplitude gain and the registering time are user-defined. The complete prototype is an open source and open hardware system. It has been tested by comparing the registered signals with the ones obtained through different commercial data recording systems and different kind of geophones. The obtained results show good correlation between the tested measurements, presenting Geophonino as a low-cost alternative system for seismic data recording.

Digital Fabrication and Free Culture. One More Minor Becoming?

Diferentes autores se refieren a la fabricación digital como la Tercera Revolución Digital, después de las revoluciones de la computación y la comunicación. Como ocurriera con las dos revoluciones precedentes, se generaron grandes expectativas en torno a las virtualidades políticas de estas nuevas tecnologías para dar lugar a relaciones de producción más libres e individuos más autónomos. Sin embargo, como también ocurriera con la computación y la comunicación, lo que realmente está ocurriendo demuestra que las supuestas virtualidades no llegarán a hacerse actuales sin una intensa implicación, organización y trabajo por parte de sectores activistas técnicos y sociales. Se discute el caso de la compra corporativa de la empresa pionera de hardware libre Makerbot, como ejemplo de la situación y punto de inflexión en las expectativas de los nuevos tecno-visionarios. Para concluir se propone una serie de posibles estrategias que podrían promover el desarrollo efectivo de un ecosistema libre y open source de fabricación digital.