Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Microbiota saprófita associada à doença periodontal em cães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da influência dos diferentes tempos de polimerização por luz incandescente sobre a resistência ao desgaste abrasivo de resinas compostas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surgical and clinical management of a patient with Glanzmann thrombasthenia: A case report

A 6-year-old girl with Glanzmann thrombasthenia presented with caries and periapical lesions in the primary mandibular second molars and moderate gingivitis of the maxillary and mandibular anterior teeth. Dental extraction was recommended, and before every surgical intervention, the patient underwent platelet-concentrate transfusion to prevent hemorrhage. Epsilon aminocaproic acid was administered 6 hours before, and 48 hours after every dental procedure to prevent bleeding. In this case, treatment was effective in the prevention of hemorrhagic complications, during the required dental procedures.

Atividade biológica de gel dentifrício e enxagüatório bucal contendo extratos vegetais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do comportamento de pacientes atendidos na Bebê Clínica da Disciplina de Odontopediatria da Faculdade de Odontologia de Araçatuba-UNESP: estudo longitudinal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Perfil clínico-epidemiológico de saúde bucal em pacientes de hanseníase

O objetivo deste estudo foi avaliar o perfil clínico-epidemiológico de saúde bucal em pacientes portadores de hanseníase em PQT através da avaliação clínica da mucosa bucal, dos indicadores epidemiológicos IPV (Índice de Placa Visível), ISG (ìndice de Sangramento Gengival), ICPOD (Índice de Dentes Cariados, Perdidos e Obturados) e mensuração do fluxo salivar pelo ISS (Índice de Secreção Salivar), além da capacidade tampão pelo pH salivar. A amostra foi de 80 pacientes na faixa etária de 8 a 73 anos submetidos ao exame clínico bucal e coleta estimulada de saliva, divididos em Grupo de Estudo (GE), constituído de 40 pacientes portadores de hanseníase em PQT, atendidos no CRTDS Dr. Marcello Candia Marituba-Pa; e Grupo Controle (GC), de pacientes não portadores de hanseníase. Os resultados apontaram, 62,5% de alterações inespecíficas da mucosa bucal, dentre as mais frequentes pigmentação racial na gengiva, linha alba mordiscada na mucosa jugal, inflamação gengival, varicosidade no ventre lingual e trauma por uso de prótese no GE, não havendo diferença estatística significante (p=0,14) com o GC. A média do IPV no GE foi de 50,4% das superfícies dentárias com acúmulo de placa bacteriana, não havendo também diferença estatisticamente significante (p=0,40) com o GC. O IPV foi maior nos indivíduos sem acesso ao serviço odontológico e à medida que aumentou o grau de incapacidade dos pacientes menor foi o acesso ao serviço. A média do ISG foi de 29,7% das superfícies dentárias com sangramento gengival, não havendo diferença estatística significante (p=0,35) com o GC. O ICPOD médio foi de 11,6 variando de 4,0 a 24, o que aumentou com o avanço da idade. O maior acúmulo de placa, o sangramento gengival e o consumo de alimentos carigênicos fora do horário da refeição também contribuiram para o aumento do ICPOD. Outro fator relacionado ao aumento de ICPOD foi o não acesso ao serviço odontológico por 70% dos pacientes hansenianos, havendo diferença estatisticamente significante (p=0,0005) com o GC e a falta de orientação de higiene bucal em 60%, havendo diferença estatisticamente significante (p=0,01) com o GC. O ISS médio foi de 0,9ml/min e não apresentou associação com as doses do PQT e nem com o uso de prednisona. Dos pacientes do GE, 25% apresentaram hipossalivação, mas não houve aumento de ICPOD e nenhum dos grupos revelou alteração de pH salivar, variando de 5,85 a 7,34, com capacidade tampão dentro do padrão de normalidade. Concui-se que perfil clínico-epidemiológico dos pacientes portadores de hanseníase assemelha-se a do grupo controle, não tendo sido diagnosticado nenhuma alteração da mucosa bucal específica para hanseníase, o que não anula, entretanto a póssibilidade da cavidade bucal ser fonte de infecção para hanseníase necessitando de confirmação histopatológica e/ou PCR para detecção de M. leprae viável. Além disso, os dados mostraram que a maioria dos pacientes hansenianos avaliados não tem acesso ao serviço odontológico, nem orientação de higiene bucal, resultante da falta de políticas públicas de saúde bucal para hansenianos.

Avaliação do tipo de procedimento odontológico, cirurgia x dentística restauradora, na variabilidade do tempo de duração de dois anestésicos: bupivacaína x prilocaína

Pós-graduação em Odontologia - ICT

Auditoria em Saúde: justificativas de glosas no setor odontológico

Objective – To collecting data about the main explanations for glosses and demonstrating the percentage of production loss in the odontologic procedures. Methods – It is about an epidemiological study of historical series, retrospective and quantitative, based on the data collection of DATASUS information system and reports realized by the city of Aquidauana/MS audit system from 2001 to 2010. Results – The results show that in this period, 921.300 odontologic procedures were presented as production; being 223.226 (24,2%) individual procedures and 698.074 (75,8%) collective. There were 23.881 (2,6%) glosses, being 10.158 (42,5%) in the collective procedures and 13.723 (57,5%) in the individual ones. The main cause for glosses related to individual procedures was the repetition of procedures for the same patient and the same tooth (42,4%). In the collective activities, it was the non-accomplishment of the oral health collective program (68,9%). There was an increase of loss in the individual procedures going from less than 5% in the period of 2001 to 2007; to 5,8 % in 2008; 8,9% in 2009 and 14,1 % in 2010 and in the collective procedures the loss reached 4% in 2010. Conclusion – It was concluded that the most frequent cause of glosses explanation was the repetition of procedures for the same patient and the same tooth in the individual cases and the non-accomplishment of the oral health collective program in the collective activities. The importance of the audit system as a trust-worthy instrument for the managers in the planning and evaluation of health actions with the intention of guarantee the solution of the serv-ices provided.

Consultório odontológico: uma AET utilizando-se da EWA

This work tells the first steps of a larger project, that has for objective to develop the ergonomic evaluation of clinics odontologics installed in the Basic Units of Health of the municipal districts from São Paulo of São José dos Campos and Bauru. It is looked for to the end of the work to have characterized them, making possible like this the analysis in the way as it happens the interface among the users, equipments and atmosphere. For so much some will be used methodologies consecrated in the international scenery. It is told the results obtained with the first developed analysis, as test equal calibration of the chosen methodologies, as well as determination of procedures and worn-out times, for planning of the process.

Encuentro entre la historia y las creencias : Santa Apolonia

Este trabajo aborda la temática de una concepción que ha tenido vigencia en el ámbito de la enfermedad odontológica. Se realiza una referencia a la vinculación entre el comienzo de las prácticas de intervención junto al modelo de creencias religiosas como respuesta al problema del dolor en la cavidad bucal. La figura de Santa Apolonia es un ejemplo del entrecruzamiento de la crónica histórica y las creencias de orden religioso en el proceso de desarrollo de la odontología.

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found