Jeux d'acteurs et enchevêtrement des vecteurs d'action : sociologie qualitative et approche interdisciplinaire du processus de patrimonialisation de l’usine de Paulilles devenue «site classé»

Thèse réalisée en cotutelle avec l'Université de Perpignan Via Domitia (UPVD), France.

A preliminary study into the environmental and economic consequences of a sugar factory depithing operation

Bagasse stockpile operations have the potential to lead to adverse environmental and social impacts. Dust releases can cause occupational health and safety concerns for factory workers and dust emissions impact on the surrounding community. Preliminary modelling showed that bagasse depithing would likely reduce the environmental risks, particularly dust emissions, associated with large scale bagasse stockpiling operations. Dust emission properties were measured and used for dispersion modelling with favourable outcomes. Modelling showed a 70% reduction in peak ground level concentrations of PM10 dust (particles with an aerodynamic diameter less than 10 µm) from operations on depithed bagasse stockpiles compared to similar operations on stockpiles of whole bagasse. However, the costs of a depithing operation at a sugar factory were estimated to be approximately $2.1 million in capital expenditure to process 100,000 t/y of bagasse and operating costs were approximately $200,000 p.a. The total capital cost for a 10,000 t/y operation was approximately $1.6 million. The cost of depithing based on a discounted cash flow analysis was $5.50 per tonne of bagasse for the 100,000 t/y scenario. This may make depithing prohibitively expensive in many situations if installed exclusively as a dust control measure.

A Nobel Prize for governance and institutions : Oliver Williamson and Elinor Ostrom

This paper reviews the 2009 Nobel Prize in Economics jointly awarded to Oliver Williamson for his work on governance in organizations and the boundaries of the firm, and to Elinor Ostrom for her work on the governance of common pool resources. We review the careers and the research contributions of Williamson and Ostrom to the theory and analysis of economic institutions of governance. Both winners of this Prize for 'economic governance' are thoroughly deserved, yet like the Hayek- Myrdal Prize of 1974 their respective approaches, methods and findings are almost diametrically opposed. Williamson offers a top-down contracts-based solution to the incentive problems of opportunism in corporate governance, whereas Ostrom offers a bottom-up communication-based solution to the governance opportunities of community resources. We offer some critical comments on Williamson's analytic work and discussion of the potential for further application of Ostrom's case-study based experimental methodology. We conclude with a suggested third nominee to make better sense of how these two great scholars' works fit together, namely George Richardson'

Econometric fellows and Nobel Laureates in economics

An academic award is method by which peers offer recognition of intellectual efforts. In this paper we take a purely descriptive look at the relationship between becoming a Fellow of the Econometric Society and receiving the Nobel Prize in economics. We discover some interesting aspects: of all 69 Nobel Prize Laureates between 1969 and 2011, only 9 of them were not also Fellows. Moreover, the proportion of future novel winners among the Fellows has been quite high throughout time and a large share of researchers who became Fellows between the 1930s and 1950s became Nobel Laureates at a later stage. On average, researchers became Fellows relatively early in their career (14.9 years after their PhD) and those who were subsequently made Nobel Laureates became Fellows earlier than other researchers. Interestingly, Harvard and MIT have been the dominant PhD granting institutions to generate Fellows and Nobel Laureates in the past.

Modelling the flow of cane constituents through the milling process of a raw sugar factory

This thesis reports on an investigation to develop an advanced and comprehensive milling process model of the raw sugar factory. Although the new model can be applied to both, the four-roller and six-roller milling units, it is primarily developed for the six-roller mills which are widely used in the Australian sugar industry. The approach taken was to gain an understanding of the previous milling process simulation model "MILSIM" developed at the University of Queensland nearly four decades ago. Although the MILSIM model was widely adopted in the Australian sugar industry for simulating the milling process it did have some incorrect assumptions. The study aimed to eliminate all the incorrect assumptions of the previous model and develop an advanced model that represents the milling process correctly and tracks the flow of other cane components in the milling process which have not been considered in the previous models. The development of the milling process model was done is three stages. Firstly, an enhanced milling unit extraction model (MILEX) was developed to access the mill performance parameters and predict the extraction performance of the milling process. New definitions for the milling performance parameters were developed and a complete milling train along with the juice screen was modelled. The MILEX model was validated with factory data and the variation in the mill performance parameters was observed and studied. Some case studies were undertaken to study the effect of fibre in juice streams, juice in cush return and imbibition% fibre on extraction performance of the milling process. It was concluded from the study that the empirical relations developed for the mill performance parameters in the MILSIM model were not applicable to the new model. New empirical relations have to be developed before the model is applied with confidence. Secondly, a soluble and insoluble solids model was developed using modelling theory and experimental data to track the flow of sucrose (pol), reducing sugars (glucose and fructose), soluble ash, true fibre and mud solids entering the milling train through the cane supply and their distribution in juice and bagasse streams.. The soluble impurities and mud solids in cane affect the performance of the milling train and further processing of juice and bagasse. New mill performance parameters were developed in the model to track the flow of cane components. The developed model is the first of its kind and provides some additional insight regarding the flow of soluble and insoluble cane components and the factors affecting their distribution in juice and bagasse. The model proved to be a good extension to the MILEX model to study the overall performance of the milling train. Thirdly, the developed models were incorporated in a proprietary software package "SysCAD’ for advanced operational efficiency and for availability in the ‘whole of factory’ model. The MILEX model was developed in SysCAD software to represent a single milling unit. Eventually the entire milling train and the juice screen were developed in SysCAD using series of different controllers and features of the software. The models developed in SysCAD can be run from macro enabled excel file and reports can be generated in excel sheets. The flexibility of the software, ease of use and other advantages are described broadly in the relevant chapter. The MILEX model is developed in static mode and dynamic mode. The application of the dynamic mode of the model is still under progress.

Monster factory : International dynamics of the Australian horror movie industry

From the early-to-mid 2000s, the Australian horror film production sector has achieved growth and prosperity of a kind not seen since its heyday of the 1980s. Australian horror films can be traced back to the early 1970s, when they experienced a measure of commercial success. However, throughout the twenty-first-century Australian horror gained levels of international recognition that have surpassed the cult status enjoyed by some of the films in the 1970s and 1980s. In recent years, Australia has emerged as a significant producer of breakout, cult, and solid B-grade horror films, which have circulated in markets worldwide. Australian horror’s recent successes have been driven by one of its distinguishing features: its international dimensions. As this chapter argues, the Australian horror film production sector is an export-oriented industry that relies heavily on international partnerships and presales (the sale of distribution rights prior to a film’s completion), and on its relationships with overseas distributors. Yet, these traits vary from film to film as the sector is comprised of several distinct domains of production activity, from guerrilla films destined for niche video markets like specialist cult video stores and online mail-order websites to high(er)-end pictures made for theatrical markets. Furthermore, the content and style of Australian horror movies has often been tailored for export. While some horror filmmakers have sought to play up the Australianness of their product, others have attempted to pass off their films as faux-American or as placeless films effaced of national reference points.

Posttranscriptional gene silencing is not compromised in the Arabidopsis CARPEL FACTORY (DICER-LIKE1) mutant, a homolog of dicer-1 from Drosophila

Posttranscriptional silencing (PTGS) in plants, nematodes, Drosophila, and perhaps all eukaryotes operates by sequence-specific degradation or translational inhibition of the target mRNA. These processes are mediated by duplexed RNA. In Drosophila and nematodes, double-stranded (ds)RNA or self-complementary RNA is processed into fragments of approximately 21 nt by Dicer-1 [1, 2]. These small interfering RNAs (siRNAs) serve as guides to target degradation of homologous single-stranded (ss)RNA [1, 3]. In some cases, the approximately 21 nt guide fragments derived from endogenous, imperfectly self-complementary RNAs cause translational inhibition of their target mRNAs, with which they have substantial, but not perfect sequence complementarity [4-6]. These small temporal RNAs (stRNAs) belong to a class of noncoding microRNAs (miRNAs), 20-24 nt in length, that are found in flies, plants, nematodes, and mammals [4, 6-12]. In nematodes, the Dicer-1 enzyme catalyzes the production of both siRNA and stRNA [2, 13-15]. Mutation of the Arabidopsis Dicer-1 homolog, CARPEL FACTORY (CAF), blocks miRNA production [1, 4, 16-18]. Here, we report that the same caf mutant does not block either PTGS or siRNA production induced by self-complementary hairpin RNA. This suggests either that this mutation only impairs miRNA formation or, more interestingly, that plants have two distinct dicer-like enzymes, one for miRNA and another for siRNAi production.

A preliminary study into the environmental and economic consequences of a sugar factory depithing operation

Bagasse stockpile operations have the potential to lead to adverse environmental and social impacts. Dust releases can cause occupational health and safety concerns for factory workers and dust emissions impact on the surrounding community. Preliminary modelling showed that bagasse depithing would likely reduce the environmental risks, particularly dust emissions, associated with large-scale bagasse stockpiling operations. Dust emission properties were measured and used for dispersion modelling with favourable outcomes. Modelling showed a 70% reduction in peak ground level concentrations of PM10 dust (particles with an aerodynamic diameter less than 10 μm) from operations on depithed bagasse stockpiles compared to similar operations on stockpiles of whole bagasse. However, the costs of a depithing operation at a sugar factory were estimated to be approximately $2.1 million in capital expenditure to process 100 000 t/y of bagasse and operating costs were 200 000 p.a. The total capital cost for a 10 000 t/y operation was approximately $1.6 million. The cost of depithing based on a discounted cash flow analysis was $5.50 per tonne of bagasse for the 100 000 t/y scenario. This may make depithing prohibitively expensive in many situations if installed exclusively as a dust control measure.

Improving combustion stability in sugar factory boilers

Reliable operation of a sugar factory boiler station is essential for efficient and timely processing of the cane supply. Sugar factory boilers have to contend with changes in fuel quality caused by variations in performance of the extraction station, different cane varieties and associated agronomic factors along with fluctuations in factory steam demand. These variations can affect the stability of combustion in boiler furnaces leading to reductions in boiler steam output and large furnace pressure fluctuations that can cause serious damage. This paper investigates the causes of unstable combustion, discusses aspects of boiler design that make a boiler more susceptible to unstable combustion and uses modelling to evaluate different options for improving combustion stability.

Addressing factory needs in cane variety selection

Cane fibre content has increased over the past ten years. Some of that increase can be attributed to new varieties selected for release. This paper reviews the existing methods for quantifying the fibre characteristics of a variety, including fibre content and fibre quality measurements – shear strength, impact resistance and short fibre content. The variety selection process is presented and it is reported that fibre content has zero weighting in the current selection index. An updated variety selection approach is proposed, potentially replacing the existing selection process relating to fibre. This alternative approach involves the use of a more complex mill area level model that accounts for harvesting, transport and processing equipment, taking into account capacity, efficiency and operational impacts, along with the end use for the bagasse. The approach will ultimately determine a net economic value for the variety. The methodology lends itself to a determination of the fibre properties that have a significant impact on the economic value so that variety tests can better target the critical properties. A low-pressure compression test is proposed as a good test to provide an assessment of the impact of a variety on milling capacity. NIR methodology is proposed as a technology to lead to a more rapid assessment of fibre properties, and hence the opportunity to more comprehensively test for fibre impacts at an earlier stage of variety development.

The court and the factory the legal construction of occupational health and safety offences in Victoria

This thesis reports on an empirically based study of the manner in which Victorian Magistrates Courts constructed occupational health and safety (OHS) issues when hearing prosecutions for offences under the Industrial Safety, Health and Welfare Act 1981 (the ISHWA) and the Occupational Health and Safety Act 1985 (OHSA) from 1983 to 1991. These statutes established OHS standards for employers and other relevant parties. The State government enforced these standards through an OHS inspectorate which had a range of enforcement powers, including prosecution. After outlining the historical development of Victoria’s OHS legislation, the magistracy’s historical role in its enforcement, and the development of an enforcement culture in which inspectors viewed prosecution as a last resort, the study shows how the key provisions of the ISHWA and OHSA required occupiers of workplaces and employers to provide and maintain safe systems of work, including the guarding of dangerous machinery. Using a wide range of empirical research methods and legal materials, it shows how the enforcement policies, procedures and practices of the inspectorate heavily slanted inspectors workplace investigations and hence prosecutions towards a restricted and often superficial, analysis of incidents (or “events”) most of which involved injuries on machinery. There was evidence, however, that after the establishment of the Central Investigation Unit in 1989 cases were more thoroughly investigated and prosecuted. From 1990 the majority of prosecutions were taken under the employer’s general duty provisions, and by 1991 there was evidence that prosecutions were focusing on matters other than machinery guarding.

Awards before and after the Nobel Prize : a Matthew effect and/or a ticket to one's own funeral?

The primary aim of this descriptive exploration of scientists’ life cycle award patterns is to evaluate whether awards breed further awards and identify researcher experiences after reception of the Nobel Prize. To achieve this goal, we collected data on the number of awards received each year for 50 years before and after Nobel Prize reception by all 1901–2000 Nobel laureates in physics, chemistry, and medicine or physiology. Our results indicate an increasing rate of awards before Nobel reception, reaching the summit precisely in the year of the Nobel Prize. After this pinnacle year, awards drop sharply. This result is confirmed by separate analyses of three different disciplines and by a random-effects negative binomial regression model. Such an effect, however, does not emerge for more recent Nobel laureates (1971–2000). In addition, Nobelists in medicine or physiology generate more awards shortly before and after prize reception, whereas laureates in chemistry attract more awards as time progresses.

The implications of educational and methodological background for the career success of Nobel Laureates : an investigation of major awards

Nobel laureates have achieved the highest recognition in academia, reaching the boundaries of human knowledge and understanding. Owing to past research, we have a good understanding of the career patterns behind their performance. Yet, we have only limited understanding of the factors driving their recognition with respect to major institutionalized scientific honours. We therefore look at the award life cycle achievements of the 1901–2000 Nobel laureates in physics, chemistry, and physiology or medicine. The results show that Nobelists with a theoretical orientation achieved more awards than laureates with an empirical orientation. Moreover, it seems their educational background shapes their future recognition. Researchers educated in Great Britain and the US tend to attract more awards than other Nobelists, although there are career pattern differences. Among those, laureates educated at Cambridge or Harvard are more successful in Chemistry, those from Columbia and Cambridge excel in Physics, while Columbia educated laureates dominate in Physiology or Medicine.