Soils of the Jurassic formations in the central Algarve; their occurrence, distribution, genesis and site qualities

In the central Algarve different soils have developed dependent on petrography of the parent material, slope position and recent erosion. The general patterns of occurence and distribution of different soils are described. The age of an eutric Nitosol is estimated and the relation between the soil and the parent material is investigated. Some different soils are described as examples with their chemical and physical properties. The water budget of soils is described in general with considerations concerning ground water recharge and run-off as well as in dependence of climate and of different site conditions.

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Chlorophyll determination with a portable chlorophyll meter can indicate the period of highest N demand of plants and whether sidedressing is required or not. In this sense, defining the optimal timing of N application to common bean is fundamental to increase N use efficiency, increase yields and reduce the cost of fertilization. The objectives of this study were to evaluate the efficiency of N sufficiency index (NSI) calculated based on the relative chlorophyll index (RCI) in leaves, measured with a portable chlorophyll meter, as an indicator of time of N sidedressing fertilization and to verify which NSI (90 and 95 %) value is the most appropriate to indicate the moment of N fertilization of common bean cultivar Perola. The experiment was carried out in the rainy and dry growing seasons of the agricultural year 2009/10 on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block design with five treatments, consisting of N managements (M1: 200 kg ha-1 N (40 kg at sowing + 80 kg 15 days after emergence (DAE) + 80 kg 30 DAE); M2: 100 kg ha-1 N (20 kg at sowing + 40 kg 15 DAE + 40 kg 30 DAE); M3: 20 kg ha-1 N at sowing + 30 kg ha-1 when chlorophyll meter readings indicated NSI < 95 %; M4: 20 kg ha-1 N at sowing + 30 kg ha-1 N when chlorophyll meter readings indicated NSI < 90 % and, M5: control (without N application)) and four replications. The variables RCI, aboveground dry matter, total leaf N concentration, production components, grain yield, relative yield, and N use efficiency were evaluated. The RCI correlated with leaf N concentrations. By monitoring the RCI with the chlorophyll meter, the period of N sidedressing of common bean could be defined, improving N use efficiency and avoiding unnecessary N supply to common bean. The NSI 90 % of the reference area was more efficient to define the moment of N sidedressing of common bean, to increase N use efficiency.

Nutrient extraction and exportation by common bean cultivars under different fertilization levels: I - macronutrients

The use of cultivars with a higher yield potential and the adoption of new technology have achieved high grain yields in common bean, which probably changed the demand for nutrients in this crop. However, there is almost no information about the periods of the cycle in which nutrients are most demanded at which quantities by the main cultivars. The objective of this study was to evaluate the macronutrient extraction and exportation by the common bean cultivars Pérola and IAC Alvorada, under different levels of NPK fertilization, on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block (split plot) design with four replications. The plots consisted of six treatments based on a 2 x 3 factorial model, represented by two cultivars and three NPK levels (PD0 - 'Pérola' without fertilization, PD1 - 'Pérola' with 50 % of recommended fertilization, PD2 - 'Pérola' with 100 % of recommended fertilization, AD0 - 'IAC Alvorada' without fertilization, AD1 - 'IAC Alvorada' with 50 % of recommended fertilization, and AD2 - 'IAC Alvorada' with 100 % of recommended fertilization) and subplots sampled seven times during the cycle. At higher levels of NPK fertilization, the grain yield and macronutrient extraction and exportation of both cultivars were higher, but without statistical differences. Macronutrient absorption was higher in the treatments with 100 % of recommended NPK fertilization (average amounts per hectare: 140 kg N, 16.5 kg P, 120 kg K, 69 kg Ca, 17.9 kg Mg, and 16.3 kg S). Regardless of the treatment, the demand for N, P, K, Ca, and Mg was highest from 45 to 55 days after emergence (DAE), i.e., in the R7 stage (pod formation), while the highest S absorption rates were concentrated between 55 and 65 DAE. More than 70 % of P, between 58 and 69 % of N, 40 and 52 % of S, 40 and 48 % of K, and 35 and 45 % of Mg absorbed during the cycle was exported with grains, whereas less than 15 % of Ca was exported.

Nutrient extraction and exportation by common bean cultivars under different fertilization levels: II - micronutrients

Where the level of agricultural technology is higher, common bean cultivars with a higher yield potential possibly require greater amounts of micronutrients. In Brazil however, there is a lack of information about the micronutrient extraction and exportation by the main grown cultivars. The objective of this study was to evaluate micronutrient (B, Cu, Fe, Mn, and Zn) extraction and exportation by common bean cultivars Pérola and IAC Alvorada, under different levels of NPK fertilization, on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block (split plot) design with four replications. The plots consisted of six treatments based on a 2 x 3 factorial model, represented by two cultivars and three NPK levels (PD0 - 'Pérola' without fertilization, PD1 - 'Pérola' with 50 % of recommended fertilization, PD2 - 'Pérola' with 100 % of recommended fertilization, AD0 - 'IAC Alvorada' without fertilization, AD1 - 'IAC Alvorada' with 50 % of recommended fertilization, and AD2 - 'IAC Alvorada' with 100 % of recommended fertilization) and subplots sampled seven times during the cycle. Higher levels of NPK fertilization increased micronutrient extraction by both cultivars, and treatments with 100 % of recommended NPK fertilization extracted on average 167 g B, 58 g Cu, 1,405 g Fe, 1,213 g Mn and 211 g Zn per hectare. Regardless of the treatment, the highest demand period for B, Cu, Fe, Mn and Zn in both cultivars occurred at the R7 stage (pod formation), i.e. 42 to 55 days after emergence (DAE). The amount of B, Cu, Fe, Mn and Zn exported depended mainly on the level of NPK fertilization used, with values per hectare ranging from 38 to 90 g of B, 12 to 26 g of Cu, 222 to 568 g of Fe 234 to 467 g of Mn, and 40 to 96 g of Zn.

Mobilidade do sulfentrazone em Nitossolo Vermelho e em Neossolo Quartzarênico

O objetivo deste trabalho foi determinar a mobilidade do herbicida sulfentrazone em duas classes de solos (Nitossolo Vermelho e Neossolo Quartzarênico), em função de índices pluviométricos crescentes, sendo, portanto, influenciado pelas propriedades químicas e físicas dos solos com diferentes teores de ferro. em tubos de PVC de 10 cm de diâmetro por 50 cm de comprimento, preenchidos com os solos e saturados com água a 65% (p/p), foi aplicado o sulfentrazone (800 g ha-1). Na seqüência, foram simuladas chuvas diárias de 10 mm até atingir os índices pluviométricos de 30, 60 e 90 mm. Os tubos de PVC foram então desmontados - semeando-se Sorghum bicolor nas profundidades correspondentes de 2,5; 7,5; 12,5; 17,5; 22,5; e 30,0 cm da superfície do tubo - e mantidos em casa de vegetação por 15 dias, para avaliação da germinação e do crescimento inicial das plântulas. No final do experimento foram avaliadas as alterações morfofisiológicas que caracterizavam os efeitos tóxicos do produto, além de se medir o comprimento da parte aérea até a última lígula visível e a fitomassa seca das plantas. Quando sob precipitação de 90 mm no Neossolo Quartzarênico, o sulfentrazone formou uma banda de arraste de até 12,5 cm e, no Nitossolo Vermelho, até os 7,5 cm.

Agregação de ume nitossolo vermelho distroférrico sob sistemas de plantio direto, preparo convencional e mata nativa

This study aimed to evaluate the effect of time since the adoption of the no-till system, in comparison with a native forest area and a conventional tillage area, using the distribution of soil aggregates in a Distroferric Red Nitosol. Treatments were as follows: native forest (NF), conventional tillage (CT), no-till for one year (NT1), no-till for four years (NT4), no-till for five years (NT5), and no-till for 12 years (NT12). Aggregate samples were collected randomly within each treatment at depths of 0-5 and 10-15 cm. After sifting the aggregates in water they were separated into the following aggregate classes > 2 mm; < 2 mm; 2-1 mm, and < 1 mm. The adoption time in the no-till system favored soil aggregation. The mean weighted diameter (MWD) of the soil aggregates and the percentage of aggregates greater than 2 mm increased with adoption time in the no-till system at the 0-5 cm depth. The NF and NT12 treatments had higher MWD values in the 0-5 cm layer. CT had the highest percentage of aggregates smaller than 1 mm.

Esforços em ferramentas rompedoras de solo de semeadoras de plantio direto

The individual evaluation of mechanisms for opening furrows to drop the seeds in a no-tillage seeders cultivation assists the companies in the sizing of opening tools of the ground, that search for minor energy petition and for diminishing the ground area mobilized. Therefore this work had the aim of evaluate the efforts of five different mechanisms of opening of ridge of seeding of direct plantation varyng the vertical load. The experiment was installed in one ground classified as Dystroferric Red Nitosol. The used experimental delineation was of the one randomized blocks in a factorial project 5 x 4, constituted a the following factors: five mechanisms of furrow opening (even disk - DL, corrugated disk - DC, ondulated disk - DO, double disk - DD and furrow rod - F) and four vertical loads (750, 1500, 2250 and 3000 N). To measure the forces in the studied treatments a dynamometer with sensitivity in the directions was used horizontal, lateral and vertical direction. The evaluation showed that the interaction between mechanisms of opening of ridge and vertical load was not significant, however the factors were significant when analyzed individually. The connecting rod promoted mobilization of the ground with smaller draft of horizontal effort reaching depths of work. The work showed that the vertical load influenced the depth of work of the mechanisms of ridge opening. The mechanisms of ridge opening of record type need vertical force to penetrate into the ground.

Demanda energética em diferentes sistemas de preparo periódico do solo antes e depois da subsolagem

Both the inadequate use and the ignorance of the different soil tillage implements available in the home market has become one of the leading motives of failures, related to soil and water conservation. The periodical tillage is traditionally utilized after subsoiling for soil clod breaking, leveling and residue incorporation. This work aimed to evaluate the energy requirement for different periodical soil tillage systems performed before and after subsoiling in a soil classified as Distroferric Red Nitosol. The periodic tillage systems were: disk plowing; disk plowing plus one leveling harrowing; disk harrow; disk harrow plus leveling harrowing stirring. The experimental design was a 5x2 factorial scheme with 5 completely randomized blocks. The results show that the periodic soil preparation systems based on disks have better energy efficiency when performed before the operation of subsoiling. The system of soil preparation with harrowing obtained the lower energy demand, in relation to other periodic soil preparation systems, when done after subsoiling.

Avaliação da compressibilidade de um Nitossolo Vermelho distroférrico sob sistema plantio direto, preparo convencional e mata nativa

Os efeitos do tráfego de máquinas nos atributos do solo de acordo com o tempo de adoção do sistema plantio direto são ainda pouco pesquisados em ambientes tropicais, e muitas dúvidas ainda persistem sobre a variação dinâmica da estrutura do solo e a sua interação com máquinas e equipamentos. Objetivou-se com este estudo avaliar o efeito do tempo de adoção do sistema plantio direto, comparativamente com área de mata nativa e de preparo convencional, usando os modelos de compressibilidade do solo. O estudo foi realizado em um Nitossolo Vermelho distroférrico, sob mata nativa (MN), preparo convencional (PC), plantio direto com um ano (PD1), plantio direto com quatro anos (PD4), plantio direto com cinco anos (PD5) e plantio direto com 12 anos (PD12). Amostras indeformadas e deformadas foram coletadas em duas profundidades (0-5 e 10-15 cm). O tempo de adoção do sistema plantio direto alterou o comportamento compressivo dos solos em ambas as profundidades, por meio das mudanças na pressão de preconsolidação. A profundidade de 0-5 cm apresentou menor capacidade de suporte de carga do que a profundidade de 10-15 cm. A profundidade de 0-5 cm, em todos os sistemas de manejo, mostrou-se mais susceptível à compactação em relação à profundidade de 10-15 cm. Os sistemas de plantio direto e convencional apresentaram a capacidade de suporte de carga crescente na seguinte ordem: PD5 < PD12 < PD1 < PD4 @ PC, para a profundidade de 0-5 cm e para a profundidade de 10-15 cm: MN @ PD12 < PC @ PD4 < PD5, enquanto o sistema PD1 apresentou comportamento diferenciado.

Avaliação dos atributos físicos de um Nitossolo Vermelho distroférrico sob sistema plantio direto, preparo convencional e mata nativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Antecipação da adubação de semeadura do milho em dois sistemas de manejo do solo

Cada sistema de manejo do solo é trabalhado de maneira própria, alterando de forma diferenciada suas propriedades químicas, físicas e biológicas, podendo requerer modificações nas recomendações e no manejo da adubação. Com a finalidade de avaliar o desempenho de três cultivares de milho em relação à adubação realizada em pré-semeadura, comparada à adubação na semeadura, em dois sistemas de manejo do solo, foi realizado este estudo. O experimento foi conduzido na Faculdade de Ciências Agronômicas da UNESP, campus de Botucatu-SP, no período de novembro de 2003 a maio de 2004, em Nitossolo Vermelho distroférrico. O delineamento experimental utilizado foi o de blocos ao acaso com parcelas subsubdivididas e quatro repetições. As parcelas foram constituídas pelos sistemas de manejo do solo (plantio direto e preparo reduzido com escarificação); as subparcelas, pelas épocas de adubação (adubação de pré-semeadura na superfície do solo, realizada 22 dias antes da semeadura do milho, e adubação feita junto com a semeadura do milho, sendo os fertilizantes incorporados ao solo); e as subsubparcelas, pelos cultivares de milho (DKB 333B, CO 32 e AL Bandeirante), totalizando 12 tratamentos. Os dados de produtividade, componentes de produção e teores de N, P e K no tecido foliar foram submetidos à análise de variância e às análises multivariadas de agrupamentos e de componentes principais. Os sistemas de manejo do solo não influíram no desempenho da cultura do milho, tampouco as épocas de adubação. As diferenças observadas nos componentes de produção e no desempenho da cultura do milho foram decorrentes, principalmente, da divergência genética dos cultivares de milho.

Consumo de combustível em diferentes sistemas de preparo periódico realizados antes e depois da operação de subsolagem

Foi estudado o consumo de combustível de diferentes sistemas de preparo periódico, realizados antes e depois da operação de subsolagem num solo classificado como Nitossolo Vermelho Distroférrico. As operações de preparo foram: a) 1 aração com arado de discos; b) 1 aração com arado de discos e 1 gradagem com grade destorroadora-niveladora; c) 1 gradagem com grade aradora; d) 1 gradagem com grade aradora e 1 gradagem com grade destorroadora-niveladora e; e) 1 escarificação com escarificador. O consumo específico (g kWh-1) de combustível para os diferentes sistemas de preparo periódico do solo variou estatisticamente com a condição de subsolagem realizada antes e depois. A escarificação proporcionou menor volume de combustível requerido por hectare (L ha-1) que os demais sistemas de preparo. O preparo do solo depois da subsolagem obteve um maior volume de combustível consumido por área (L ha-1).

Produção e características físicas de sementes de mamoneira em função da posição do racemo e do fruto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atividade radicular da soja: definição de um método

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)