A study of the turbulence of the neutral medium in two nearby spiral galaxies

The width of the 21 cm line (HI) emitted by spiral galaxies depends on the physical processes that release energy in the Interstellar Medium (ISM). This quantity is called velocity dispersion (σ) and it is proportional first of all to the thermal kinetic energy of the gas. The accepted theoretical picture predicts that the neutral hydrogen component (HI) exists in the ISM in two stable phases: a cold one (CNM, with σ~0.8 km/s) and a warm one (WNM, with σ~8 km/s). However, this is called into question by the observation that the HI gas has usually larger velocity dispersions. This suggests the presence of turbulence in the ISM, although the energy sources remain unknown. In this thesis we want to shed new light on this topic. We have studied the HI line emission of two nearby galaxies: NGC6946 and M101. For the latter we used new deep observations obtained with the Westerbork radio interferometer. Through a gaussian fitting procedure, we produced dispersion maps of the two galaxies. For both of them, we compared the σ values measured in the spiral arms with those in the interarms. In NGC6946 we found that, in both arms and interarms, σ grows with the column density, while we obtained the opposite for M 101. Using a statistical analysis we did not find a significant difference between arm and interarm dispersion distributions. Producing star formation rate density maps (SFRD) of the galaxies, we studied their global and local relations with the HI kinetic energy, as inferred from the measured dispersions. For NGC6946 we obtained a good log-log correlation, in agreement with a simple model of supernova feedback driven turbulence. This shows that in this galaxy turbulent motions are mainly induced by the stellar activity. For M 101 we did not find an analogous correlation, since the gas kinetic energy appears constant with the SFRD. We think that this may indicate that in this galaxy turbulence is driven also by accretion of extragalactic material.

Coordination-driven self-assembly of a novel carbonato-bridged heteromolecular neutral nickel(II) triangle by atmospheric CO2 fixation

Formation of a quasi-symmetrical mu(3)-carbonato-bridged self-assembled heteromolecular triangle of Ni(II), [(mu(3)-CO3){Ni-2(salmeNH)(2)(NCS)(2)}[Ni(salmeNH(2))(2)]center dot Et2O center dot H2O (HsalmeNH = 2-[(3-methylamino-propylimino)-methyl]-phenol) involves atmospheric CO2 uptake in a neutral medium, by spontaneous self-reorganization of the starting mononuclear Ni(II)-Schiff-base complex, [Ni(salmeNH)(2)]. The environment around Ni(II) in two of the subunits is different from the third one. The starting complex, (Ni(salmeNH)(2)], and one of the possible intermediate species, [Ni(salmeNH(2))(2)(NCS)(2)], which has a very similar coordination environment to that in the third Ni(II) center, have been characterized structurally. A plausible mechanism for the formation of such a triangle has also been proposed. The compound shows a very strong antiferromagnetic coupling. Fit as a regular triangular arrangement gave J = -53.1, g = 2.24, and R = 1.5 x 10(-4).

Kinetic measurements during transient film growth on zinc

Quimica Nova, Vol. 32, Nº2

Síntese de moléculas contendo a unidade de piperazina como potenciais agentes antipsicóticos

Tese de Doutoramente em Ciências (área de especialização em Química).

Artifacts in the analysis of thioridazine and other neuroleptics.

Although the sensitivity to light of thioridazine and its metabolites has been described, the problem does not seem to be widely acknowledged. Indeed, a survey of the literature shows that assays of these compounds under light-protected conditions have been performed only in a few of the numerous analytical studies on this drug. In the present study, thioridazine, its metabolites, and 18 other neuroleptics were tested for their sensitivity to light under conditions used for their analysis. The results show that light significantly affects the analysis of thioridazine and its metabolites. It readily causes the racemization of the isomeric pairs of thioridazine 5-sulphoxide and greatly decreases the concentration of thioridazine. This sensitivity to light varied with the medium used (most sensitive in acidic media) and also with the molecule (in order of decreasing sensitivity: thioridazine > mesoridazine > sulforidazine). Degradation in neutral or basic media was slow, with the exception of mesoridazine in a neutral medium. Twelve other phenothiazines tested, as well as chlorprotixene, a thioxanthene drug, were found to be sensitive to light in acidic media, whereas flupenthixol and zuclopenthixol (two thioxanthenes), clozapine, fluperlapine, and haloperidol (a butyrophenone) did not seem to be affected. In addition to being sensitive to light, some compounds may be readily oxidized by peroxide-containing solvents.

Kinetic measurements during transient film growth on zinc

The electrochemical behaviour of zinc has been extensively studied in alkaline and acid media, but only a few studies have been reported in neutral solutions, particularly in deaerated media. Zinc passivation in neutral medium and the effect of the ClO4- ion on the nucleation and growth of the passive layer is studied in this paper by a transient technique at different electrolyte concentrations and applied potentials. ZnO growth rate was shown to decrease with increasing electrolyte concentration. Moreover, passive layer growth occurred followed by pitting nucleation and growth. Film growth and pit nucleation are explained by means of the Macdonald and Engell-Stolica models.

Spectrophotometric method for determination of atazanavir sulfate in capsule dosage form

Two sensitive and simple spectrophotmetric methods were developed for determination of Atazanavir Sulfate in capsule dosage form. The first method was based on the oxidative coupling of ATV with 3-Methyl Benzothiazolin-2-one hydrazone (MBTH). The resulting green product had Λmax of 627.3 nm and was stable for 2 h. The second method was based on the reaction between diazotized drug with N-(1-napthyl)ethylenediamine dihydrochloride (NEDA) in neutral medium to yield yellowish orange product which had Λmax of 517.1 nm. The product was stable for 4 h. Both methods were highly reproducible and had been applied to pharmaceutical preparations.

Aspectes físics i químics del destintatge de paper revista mitjançant tensioactius catiònics

En una tesi anterior (Puig, 2004) es varen estudiar els aspectes mecànics vinculats al desfibratge i als consums energètics associats al procés de desintegració per acabar quantificant les forces implicades en el procés d'individualització dels components de diferents paperots. Aquest estudi, ha permès conèixer les condicions de desintegració que condueixen a un mínim consum energètic, aspecte complementari al reciclatge i destintatge del paperot però molt important per aconseguir un procés realment sostenible. Degut als requeriments del mercat, hi ha un altre aspecte o vessant realment important com és l'eliminació de tinta. Aquest procés, malgrat la complexitat industrial, es pot reduir o simplificar en dues etapes: la desintegració i la flotació. Ambdues, per raons d'eficàcia i condicionades pels agents químics que s'utilitzen, es realitzen en medi fortament alcalí (entorn d'un pH a 12). Aquest fet, genera una forta contaminació (DQO elevada) i per tant, és un procés poc respectuós amb el medi ambient. Els factors que condicionen treballar en medi alcalí són principalment, el despreniment de la tinta del suport, clarament accelerat en medi bàsic i fonamental per un bon destintatge i la utilització de tensioactius aniònics. Aquests tensioactius són sensibles al pH i la seva eficàcia disminueix en medi neutre o quasi neutre. Atès el que s'ha exposat, s'ha plantejat aquesta tesi que porta per títol "Aspectes Físics i Químics del Destintatge de Paper Revista mitjançant Tensioactius Catiònics", com un estudi del procés de destintatge de paper revista recuperat parant especial atenció a les variables físico-químiques i mecàniques del procés i a la seva influència en el despreniment i fragmentació de la tinta, així com en el procés d'eliminació de la tinta per flotació per tal d'avaluar la viabilitat d'un procés de destintatge en medi neutre enfront del destintatge alcalí convencional. S'ha utilitzat, com a paperot a destintar, el paper revista ja que aquest tipus de paper representa un percentatge elevat del paper recuperat a la Unió Europea. A més, aquest tipus de paper és utilitzat habitualment en les plantes de destintatge industrials per millorar les propietats de les suspensions destintades de paper de diari. La utilització de tensioactius catiònics és deguda a que la seva activitat no es veu afectada pel pH de la suspensió. Així, durant la comparació dels processos de destintatge en medi neutre i en medi alcalí, les eficàcies dels processos no es veuran influenciades pel grau d'ionització del tensioactiu. Donada l'absència d'estudis sobre la influència de les variables del procés en les mesures de concentració efectiva de tinta residual (ERIC) i ja que s'ha emprat aquest paràmetre per avaluar el despreniment i fragmentació de la tinta durant l'etapa de desintegració. En primer lloc, s'ha plantejat un estudi fonamental de la influència que poden tenir les variables del procés (granulometria, concentració de tinta i tipus de suport) en aquest paràmetre. Pel que fa a l'etapa de flotació, s'estudiarà l'efectivitat d'aquesta etapa, posant especial atenció a la capacitat del tensioactiu per eliminar tota la tinta despresa en l'etapa de desintegració. A més, donada la poca informació bibliogràfica referida als mecanismes de flotació amb tensioactius catiònics i la influència que té l'adsorció d'aquests agents per part de la suspensió paperera en l'etapa de flotació, s'ha dut a terme un estudi de l'adsorció dels tensioactius catiònics per part dels components d'una suspensió paperera. Per tant, la tesi realitzada té com a objectius:  Estudi fonamental de les mesures de ERIC (concentració efectiva de tinta residual) amb suports específics.  Estudi de la desintegració en medi neutre i comparació amb la desintegració clàssica.  Modelització del desfibratge de paperot a l'etapa de desintegració.  Estudi de l'eliminació de tinta per flotació en medi neutre i comparació amb la flotació clàssica.  Estudi del mecanisme d'adsorció de tensioactius en suspensions de cel·lulosa sintètica i de paperot.

Lipases produzidas por fungos derivados de ambiente marinho: otimização, purificação e caracterização bioquímica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of headspace solid phase microextraction to qualitative and quantitative analysis of tobacco additives in cigarettes

Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive. A fast and rugged method for a cigarette-screening for additives with medium volatility was developed using automatic headspace solid phase microextraction (HS-SPME) with a 65 microm carbowax-divinylbenzene fiber and gas chromatography-mass spectrometry (GC-MS) with standard electron impact ionisation. In three runs, each cigarette sample was extracted in closed headspace vials using basic, acidic and neutral medium containing 0.5 g NaCl or Na2SO4. Furthermore, the method was optimized for quantitative determination of 17 frequently occurring additives. The practical applicability of the method was demonstrated for cigarettes from 32 brands.

Desenvolvimento de microssensores eletroquímicos e aplicações no estudo de processos dinâmicos interfaciais utilizando microscopia eletroquímica de varredura

O trabalho descrito nesta tese mostra de forma detalhada a fabricação e caracterização de diferentes microssensores eletroquímicos os quais têm sido recentemente utilizados como sondas em grupo de técnicas conhecida como Scanning Electrochemical Probe Microscopy (SEPM). Desta forma, a caracterização de superfícies pode ser feita explorando diferentes fenômenos interfaciais relevantes à Ciência. Neste sentido, as interfaces de materiais cristalinos como hidroxiapatita (materiais dentários) e calcita foram o foco de estudo neste trabalho. Assim, diferentes técnicas SEPM foram exploradas no sentido de se obter informações relevantes relacionadas aos processos dentários, como a erosão ácida e hipersensibilidade. Inicialmente, microeletrodos de platina foram desenvolvidos empregando uma metodologia convencional na qual são utilizados microfibras encapsuladas em capilares de vidro. Scanning Electrochemical Microscopy (SECM) no modo amperométrico foi utilizada para obtenção de informações com relação às alterações de topografia do esmalte dentário causadas pelo contato com substâncias ácidas. Adicionalmente, SECM foi empregada no estudo do transporte de espécies eletroativas em amostras de dentina e investigações relacionadas ao bloqueio dos túbulos empregando-se cremes dentais comerciais foram realizadas. A permeação de peróxido de hidrogênio pela dentina também foi estudada. Os resultados de SECM foram comparados com imagens SEM obtidas nas mesmas condições experimentais. Microeletrodos de membrana ionófora íon-seletiva (Ion Selective Microelectrodes-ISMEs) sensíveis a íons cálcio também foram desenvolvidos e caracterizados, com subsequente aplicação em SECM no modo potenciométrico. A dissolução ácida de esmalte bovino (erosão dentária) foi investigada em diferentes valores de pH (2,5; 4,5; 6,8). Além disso, o transporte de íons cálcio através de membranas porosas sintéticas foi avaliado a uma distância tip/substrato de 300µm. Alterações no fluxo de íons cálcio foram correlacionadas em experimentos realizados na presença e ausência de campos magnéticos gerados por nanopartículas de magnetita incorporadas à membrana porosa. Microcristais de calcita facilmente sintetizados pelo método de precipitação foram utilizados como superfície modelo para investigações interfaciais, cujos resultados podem ser correlacionados aos materiais dentários. Desta forma, nanopipetas de vidro preenchidas com eletrólito suporte foram fabricadas e utilizadas como sonda em Scanning Ion Conductance Microscopy (SICM). O mapeamento topográfico de alta resolução espacial da superfície de um microcristal de calcita foi obtido utilizando o modo de varredura hopping mode. Adicionalmente, sondas multifuncionais ISME-SICM também foram desenvolvidas e caracterizadas para investigações simultâneas com relação às alterações topográficas e quantificação de íons cálcio sobre a superfície de um microcristal de calcita. A adição de reagentes ácidos no canal SICM promoveu a dissolução da superfície do microcristal, sendo obtidos dados cinéticos de dissolução. Investigações em meio neutro também foram realizadas utilizando a sonda ISME-SICM. Os resultados experimentais obtidos também foram comparados com aqueles oriundos de simulação computacional.

Caratteristiche di emissione delle regioni HII

Le regioni HII sono nubi di idrogeno ionizzato da stelle di recente formazione, massicce e calde. Tali stelle, spesso raggruppate in ammassi, emettono copiosamente fotoni di lunghezza d’onda λ ≤ 912 Å, capaci di ionizzare quasi totalmente il gas che le circonda, composto prevalentemente da idrogeno, ma in cui sono presenti anche elementi ionizzati più pesanti, come He, O, N, C e Ne. Le dimensioni tipiche di queste regioni vanno da 10 a 100 pc, con densità dell’ordine di 10 cm−3. Queste caratteristiche le collocano all’interno del WIM (Warm Ionized Medium), che, insieme con HIM (Hot Ionized Medium), WNM (Warm Neutral Medium) ed CNM (Cold Neutral Medium), costituisce la varietà di fasi in cui si presenta il mezzo interstellare (ISM, InterStellar Medium). Il tema che ci prestiamo ad affrontare è molto vasto e per comprendere a fondo i processi che determinano le caratteristiche delle regioni HII sarebbero necessarie molte altre pagine; lo scopo che questo testo si propone di raggiungere, senza alcuna pretesa di completezza, è dunque quello di presentare l’argomento, approfondendone ed evidenziandone alcuni particolari tratti. Prima di tutto descriveremo le regioni HII in generale, con brevi indicazioni in merito alla loro formazione e struttura. A seguire ci concentreremo sulla descrizione dei processi che determinano gli spettri osservati: inizialmente mostreremo quali siano i processi fisici che generano l’emissione nel continuo, concentrandoci poi su quello più importante, la Bremmstrahlung. Affronteremo poi una breve digressione riguardo al processo di ricombinazione ione-elettrone nei plasmi astrofisici ed alle regole di selezione nelle transizioni elettroniche, concetti necessari per comprendere ciò che segue, cioè la presenza di righe in emissione negli spettri delle regioni foto-ionizzate. Infine ci soffermeremo sulle regioni HII Ultra-Compatte (UC HII Region), oggetto di numerosi recenti studi.

Enhanced electrocatalytic activity of Au@Cu core@shell nanoparticles towards CO2 reduction

The development of technologies for the recycling of carbon dioxide into carbon-containing fuels is one of the major challenges in sustainable energy research. Two of the main current limitations are the poor efficiency and fast deactivation of catalysts. Core–shell nanoparticles are promising candidates for enhancing challenging reactions. In this work, Au@Cu core–shell nanoparticles with well-defined surface structures were synthesized and evaluated as catalysts for the electrochemical reduction of carbon dioxide in neutral medium. The activation potential, the product distribution and the long term durability of this catalyst were assessed by electrochemical methods, on-line electrochemical mass spectrometry (OLEMS) and on-line high performance liquid chromatography. Our results show that the catalytic activity and the selectivity can be tweaked as a function of the thickness of Cu shells. We have observed that the Au cubic nanoparticles with 7–8 layers of copper present higher selectivity towards the formation of hydrogen and ethylene; on the other hand, we observed that Au cubic nanoparticles with more than 14 layers of Cu are more selective towards the formation of hydrogen and methane. A trend in the formation of the gaseous products can be also drawn. The H2 and CH4 formation increases with the number of Cu layers, while the formation of ethylene decreases. Formic acid was the only liquid species detected during CO2 reduction. Similar to the gaseous species, the formation of formic acid is strongly dependent on the number of Cu layers on the core@shell nanoparticles. The Au cubic nanoparticles with 7–8 layers of Cu showed the largest conversion of CO2 to formic acid at potentials higher than 0.8 V vs. RHE. The observed trends in reactivity and selectivity are linked to the catalyst composition, surface structure and strain/electronic effects.

Suppression Pattern of Neutral Pions at High Transverse Momentum in Au plus Au Collisions at root S(NN)=200 GeV and Constraints on Medium Transport Coefficients

For Au + Au collisions at 200 GeV, we measure neutral pion production with good statistics for transverse momentum, p(T), up to 20 GeV/c. A fivefold suppression is found, which is essentially constant for 5 < p(T) < 20 GeV/c. Experimental uncertainties are small enough to constrain any model-dependent parametrization for the transport coefficient of the medium, e. g., <(q) over cap > in the parton quenching model. The spectral shape is similar for all collision classes, and the suppression does not saturate in Au + Au collisions.

Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.