An investigation into the mechanics of cutting using data from orthogonally cutting Nylon 66

Cutting force data for Nylon 66 has been examined in terms of various different models of cutting. Theory that includes significant work of separation at the tool tip was found to give the best correlation with experimental data over a wide range of rake angles for derived primary shear plane angle. A fracture toughness parameter was used as the measure of the specific work of separation. Variation in toughness with rake angle determined from cutting is postulated to be caused by mixed mode separation at the tool tip. A rule of mixtures using independently determined values of toughness in tension (mode 1) and shear (mode 11) is found to describe well the variation with rake angle. The ratio of modes varies with rake angle and, in turn, with the primary shear plane angle. Previous suggestions that cutting is a means of experimentally determining fracture toughness are now seen to be extended to identify the mode of fracture toughness as well.

Sviluppo di tessuti nanofibrosi in Nylon 66 con migliorata capacità di contrasto alla delaminazione

Il presente elaborato finale presenta lo sviluppo e la caratterizzazione di tessuti nanofibrosi in Nylon 66, ottenuti mediante elettrofilatura, da utilizzarsi per contrastare la delaminazione di compositi in fibra di carbonio (CFRP). Ottimizzati i parametri di processo, sono state preparate membrane di diverso spessore, poi integrate in laminati CFRP. Per consentire la reticolazione della resina e la corretta integrazione del rinforzo nanofibroso, è stato effettuato un processo di cura ottimizzato in autoclave. La tenacità a frattura interlaminare dei compositi nanomodificati risulta significativamente superiore al composito di riferimento.

Fracture Toughening and Self-Healing of Composite Laminates by Nanofibrous Mats Interleaving

Composite laminates present important advantages compared to conventional monolithic materials, mainly because for equal stiffness and strength they have a weight up to four times lower. However, due to their ply-by-ply nature, they are susceptible to delamination, whose propagation can bring the structure to a rapid catastrophic failure. In this thesis, in order to increase the service life of composite materials, two different approaches were explored: increase the intrinsic resistance of the material or confer to them the capability of self-repair. The delamination has been hindered through interleaving the composite laminates with polymeric nanofibers, which completed the hierarchical reinforcement scale of the composite. The manufacturing process for the integration of the nanofibrous mat in the laminate was optimized, resulting in an enhancement of mode I fracture toughness up to 250%. The effect of the geometrical dimensions of the nano-reinforcement on the architecture of the micro one (UD and woven laminates) was studied on mode I and II. Moreover, different polymeric materials were employed as nanofibrous reinforcement (Nylon 66 and polyvinylidene fluoride). The nano toughening mechanism was studied by micrograph analysis of the crack path and SEM analysis of the fracture surface. The fatigue behavior to the onset of the delamination and the crack growth rate for woven laminates interleaved with Nylon 66 nanofibers was investigated. Furthermore, the impact behavior of GLARE aluminum-glass epoxy laminates, toughened with Nylon 66 nanofibers was investigated. Finally, the possibility of confer to the composite material the capability of self-repair was explored. An extrinsic self-healing-system, based on core-shell nanofibers filled with a two-component epoxy system, was developed by co-electrospinning technique. The healing potential of the nano vascular system has been proved by microscope electron observation of the healing agent release as result of the vessels rupture and the crosslinking reaction was verified by thermal analysis.

Advanced electrospun nanofibrous mats for hindering delamination, improving damping and for sensing of composite laminates

Carbon Fiber Reinforced Polymers (CFRPs) display high specific mechanical properties, allowing the creation of lightweight components and products by metals replacement. To reach outstanding mechanical performances, the use of stiff thermoset matrices, like epoxy, is preferred. Laminated composites are commonly used for their ease of manipulation during object manufacturing. However, the natural anisotropic structure of laminates makes them vulnerable toward delamination. Moreover, epoxy-based CFRPs are very stiff materials, thus showing low damping capacity, which results in unwanted vibrations and structure-borne noise that may contribute to delamination triggering. Hence, searching for systems able to limit these drawbacks is of primary importance for safety reasons, as well as for economic ones. In this experimental thesis, the production and integration of innovative rubbery nanofibrous mats into CFRP laminates are presented. A smart approach, based on single-needle electrospinning of rubber-containing blends, is proposed for producing dimensionally stable rubbery nanofibers without the need for rubber crosslinking. Nano-modified laminates aim at obtaining structural composites with improved delamination resistance and enhanced damping capacity, without significantly lowering other relevant mechanical properties. The possibility of producing nanofibers nano-reinforced with graphene to be applied for reinforcing composite laminates is also investigated. Moreover, the use of piezoelectric nanofibrous mats in hybrid composite laminates for achieving self-sensing capability is presented too as a different approach to prevent the catastrophic consequences of possible structural laminate failure. Finally, an accurate, systematic, and critical study concerning tensile testing of nonwovens, using electrospun Nylon 66 random nanofibrous mats as a case study, is proposed. Nanofibers diameter and specimen geometry were investigated to thoroughly describe the nanomat tensile behaviour, also considering the polymer thermal properties, and the number of nanofibers crossings as a function of the nanofibers diameter. Stress-strain data were also analysed using a phenomenological data fitting model to interpret the tensile behaviour better.

Rinforzi grafenici in nanofibre per la modifica di materiali compositi

I CFRP laminati offrono vari vantaggi rispetto ai materiali metallici: su tutti un peso ridotto e migliori proprietà meccaniche. Tuttavia, hanno un basso damping (smorzamento delle vibrazioni) e una bassa resistenza alla delaminazione, che possono portare a forti limitazioni durante la vita d’uso del materiale. Lo scopo del seguente elaborato riguarda la produzione di vari tessuti nanofibrosi in polimeri termoplastici, tra cui Nylon 66, eventualmente additivati con grafene, da includere in laminati compositi al fine di migliorare i problemi sopracitati. I tessuti nanofibrosi sono stati ottenuti mediante la tecnica dell'elettrofilatura, dopo ottimizzazione delle soluzioni e del processo stesso. Prima di essere integrate, le membrane sono state caratterizzate morfologicamente tramite analisi SEM e termicamente mediante analisi DSC. I laminati nano-modificati, prodotti tramite laminazione manuale, sono quindi stati caratterizzati meccanicamente. In particolare, è stata valutata la tenacità a frattura interlaminare in Modo I e II tramite test DCB e ENF. Inoltre, sono stati eseguiti anche test Three-Point Bending al fine di avere un quadro più completo sulle proprietà meccaniche dei compositi nano-modificati.

Innovative electrospun nanofibers for improving delamination resistance and damping of CFRP laminates

Carbon Fiber Reinforced Polymers (CFRPs) are well renowned for their excellent mechanical properties, superior strength-to-weight characteristics, low thermal expansion coefficient, and fatigue resistance over any conventional polymer or metal. Due to the high stiffness of carbon fibers and thermosetting matrix, CFRP laminates may display some drawbacks, limiting their use in specific applications. Indeed, the overall laminate stiffness may lead to structural problems arising from their laminar structure, which makes them susceptible to structural failure by delamination. Moreover, such stiffness given by the constituents makes them poor at damping vibration, making the component more sensitive to noise and leading, at times, to delamination triggering. Nanofibrous mat interleaving is a smart way to increase the interlaminar fracture toughness: the use of thermoplastic polymers, such as poly(ε- caprolactone) (PCL) and polyamides (Nylons), as nonwovens are common and well established. Here, in this PhD thesis, a new method for the production of rubber-rich nanofibrous mats is presented. The use of rubbery nanofibers blended with PCL, widely reported in the literature, was used as matrix tougheners, processing DCB test results by evaluating Acoustic Emissions (AE). Moreover, water-soluble electrospun polyethylene oxide (PEO) nanofibers were proposed as an innovative method for reinforcing layers and hindering delamination in epoxy-based CFRP laminates. A nano-modified CFRP was then aged in water for 1 month and its delamination behaviour compared with the ones of the commercial laminate. A comprehensive study on the use of nanofibers with high rubber content, blended with a crystalline counterpart, as enhancers of the interlaminar properties were then investigated. Finally, PEO, PCL, and Nylon 66 nanofibers, plain or reinforced with Graphene (G), were integrated into epoxy-matrix CFRP to evaluate the effect of polymers and polymers + G on the laminate mechanical properties.

Dynamic mechanical analysis of binary and ternary polymer blends based on nylon copolymer/EPDM rubber and EPM grafted maleic anhydride compatibilizer

The dynamic mechanical properties such as storage modulus, loss modulus and damping properties of blends of nylon copolymer (PA6,66) with ethylene propylene diene (EPDM) rubber was investigated with special reference to the effect of blend ratio and compatibilisation over a temperature range –100°C to 150°C at different frequencies. The effect of change in the composition of the polymer blends on tanδ was studied to understand the extent of polymer miscibility and damping characteristics. The loss tangent curve of the blends exhibited two transition peaks, corresponding to the glass transition temperature (Tg) of individual components indicating incompatibility of the blend systems. The morphology of the blends has been examined by using scanning electron microscopy. The Arrhenius relationship was used to calculate the activation energy for the glass transition of the blends. Finally, attempts have been made to compare the experimental data with theoretical models.

Evaluation of the performance of different plastics used to seal nylon cDNA arrays

cDNA arrays are a powerful tool for discovering gene expression patterns. Nylon arrays have the advantage that they can be re-used several times. A key issue in high throughput gene expression analysis is sensitivity. In the case of nylon arrays, signal detection can be affected by the plastic bags used to keep membranes humid. In this study, we evaluated the effect of five types of plastics on the radioactive transmittance, number of genes with a signal above the background, and data variability. A polyethylene plastic bag 69 μm thick had a strong shielding effect that blocked 68.7% of the radioactive signal. The shielding effect on transmittance decreased the number of detected genes and increased the data variability. Other plastics which were thinner gave better results. Although plastics made from polyvinylidene chloride, polyvinyl chloride (both 13 μm thick) and polyethylene (29 and 7 μm thick) showed different levels of transmittance, they all gave similarly good performances. Polyvinylidene chloride and polyethylene 29 mm thick were the plastics of choice because of their easy handling. For other types of plastics, it is advisable to run a simple check on their performance in order to obtain the maximum information from nylon cDNA arrays.

Ressecções eletiva e de urgência para tratamento de neoplasia maligna do cólon em hospital universitário: estudo de 66 casos

O câncer de cólon é uma doença de alta prevalência e mortalidade, cujo tratamento baseia-se na ressecção cirúrgica. A possibilidade de cura aumenta com o diagnóstico precoce, daí a importância dos programas de rastreamento populacional do câncer colorretal. O presente estudo analisou, retrospectivamente, 66 pacientes submetidos a ressecções do cólon por neoplasia em um período de 58 meses no Hospital Universitário da Universidade de São Paulo. Os pacientes foram divididos em dois grupos: grupo 1, submetidos a cirurgia eletiva (28 pacientes), e grupo 2, submetidos a cirurgia de urgência (38 pacientes). Os grupos foram comparados com relação às variáveis sexo, idade, apresentação clínica, aspectos da técnica cirúrgica, sítio anatômico da lesão, estádio patológico, taxas de complicações, permanência hospitalar pós-operatória e óbitos na internação. Verificou-se no presente estudo que a idade entre os grupos foi semelhante. Houve uma predominância do sexo masculino entre os pacientes operados de urgência. No grupo de cirurgia eletiva, o principal sintoma foi a hematoquezia, enquanto os operados na urgência, tinham como principal queixa dor abdominal. A grande maioria dos pacientes, no momento da cirurgia, apresentava-se sintomática há meses. Os pacientes operados na urgência apresentaram mais tumores pT4 e os operados eletivamente apresentaram mais neoplasias em estádio I. Em ambos os grupos, o caráter oncológico dos procedimentos foi preservado, bem como foi alto o índice de anastomoses primárias (81,8%). As taxas de complicações pós-operatórias, o tempo de permanência hospitalar pós-operatório e a mortalidade foram semelhantes.

THE SLOAN BRIGHT ARCS SURVEY: DISCOVERY OF SEVEN NEW STRONGLY LENSED GALAXIES FROM z=0.66-2.94

We report the discovery of seven new, very bright gravitational lens systems from our ongoing gravitational lens search, the Sloan Bright Arcs Survey (SBAS). Two of the systems are confirmed to have high source redshifts z = 2.19 and z = 2.94. Three other systems lie at intermediate redshift with z = 1.33, 1.82, 1.93 and two systems are at low redshift z = 0.66, 0.86. The lensed source galaxies in all of these systems are bright, with i-band magnitudes ranging from 19.73 to 22.06. We present the spectrum of each of the source galaxies in these systems along with estimates of the Einstein radius for each system. The foreground lens in most systems is identified by a red sequence based cluster finder as a galaxy group; one system is identified as a moderately rich cluster. In total, SBAS has now discovered 19 strong lens systems in the SDSS imaging data, 8 of which are among the highest surface brightness z similar or equal to 2-3 galaxies known.

Unesp Informa, 2015, número 66

Boletim elaborado pela Assessoria de Comunicação e Imprensa da Reitoria da UNESP

Unesp Ciência, 2015, ano 6, número 66

Revista elaborada pela Assessoria de Comunicação e Imprensa da Reitoria da UNESP