798 resultados para N65 - Asia including Middle East
Resumo:
Inspired by the observed contrasting patterns of industrial distribution in East Asia and Europe, this paper conducts an empirical clarification of the difference in spatial relationships among countries within a region for the electric machinery industry by use of spatial econometric analysis. The results indicate that, while production in the electric machinery industry in a country is positively correlated with that of neighboring countries in East Asia, there is no significant spatial correlation in Europe. Such a difference in spatial interdependence has important implications for economic development in those regions.
Resumo:
The paper examines the development and restructuring of the iron and steel industry in Asian countries. Studying countries that have integrated steelworks with large blast furnaces (South Korea, Taiwan, China and India) and countries without (Thailand, Indonesia and Malaysia), the paper shows the difference in the development processes across the countries and across time, and points to the diversity of the development experience of these countries. The paper argues that significant differences in steel production technologies in terms of initial investment and minimum-efficient scale, the changing role of the state, and shifting demand structures in the domestic steel markets of each country have been the important factors that led to the differences in the development path of the steel industry in each country.
Resumo:
This paper is conducting a comparative analysis of the development of securities markets in nine Asian economies: Korea, Taiwan, Hong Kong, Singapore, Malaysia, Thailand, Indonesia, the Philippines, and China. This study focuses on two aspects: the history and institutional development of securities market, such as legal systems, payment systems, etc. From the analyses, this paper reveals several common features of the development of securities markets in nine Asian economies. First, most economies had an informal capital market in the early period of their history. Second, the background of the foundation of their official markets was influenced by experiences of colonization. Third, most governments recognized the importance of the capital market for economic development and had a positive attitude in promoting the market. Fourth, statistics clearly showed that most economies experienced several booms in their capital market from the late 1980s.
Resumo:
Introduction: During the period from the latter half of the 1980s until just before the Asian currency crisis in 1997, Indonesia’s economic development had drawn expectations and attention from various quarters, along with Malaysia and Thailand within the same Association of Southeast Asian Nations (ASEAN). In fact, the 1993 report by the World Bank, entitled “East Asian Miracle: Economic Growth and Public Policy,” recognized Indonesia as one of the East Asian economies with the strong economic performance, i.e. sustained economic growth (World Bank [1993]). And it was the manufacturing industry that had been the driving force behind Indonesia’s economic growth during that period. Since the 1997 outbreak of the Asian currency crisis, however, the manufacturing sector in Indonesia has been mired in a situation that rules out the kind of bright prospects it had emanated previously. The Indonesian economy is still in the developing stage, and in accordance with the history of industrial structural changes in other countries, Indonesia’s manufacturing industry can still be expected to serve as the engine of the country’s economic development. But is it really possible in an environment where economic liberalization and globalization are forging ahead? And, what sort of problems have to be dealt with to make it possible? To answer these questions, it is necessary to know the current conditions of Indonesia’s manufacturing sector, and to do that, it becomes important to think back on the history of the country’s industrialization. Thus, this paper is intended to retrace and unlock the track of Indonesia’s industrialization up until the establishment of the manufacturing sector in its present form, with the ultimate goal being to give answers to the above-mentioned questions. Subject to an analysis in this paper is the period from the installment of President Soeharto’s administration onward when industrialization of the modern industrial sector2 moved into high gear. The composition of this paper is outlined below. Section 1 first shows why it is important to examine import substitution and export orientation, both of which are used as the measures of the analysis in this paper, in tracking the history of the industrialization, and then discuss indicators of import substitution and export orientation as well as statistical data and resources needed to develop those indicators. Section 2 clarifies the status of the manufacturing industry among all industries by looking at the composition ratio of the manufacturing industry in terms of value added, imports and exports. Section 3 to 5 cover three periods between 1971 and 1995 and make an analysis of import substitution, export orientation and changes in the industrial structure for each period. Section 3 analyzes the period from 1971 through 1985, when Indonesia pursued the import substitution policy amid the oil boom. Section 4 covers the period from 1985 through 1990, when the packages of deregulatory measures were announced successively under structural adjustment policies made necessary by the fall in oil prices. Section 5 examines the period from 1990 through 1995, which saw the alternate shifts between the overheating of the economy by sharply rising investment by both domestic and foreign investors in the wake of the liberalization of investment, trade and financial services, and polices to cool down the economy. Section 6, which covers the 1995-1999 period straddling the economic crisis, is designed for an analysis of the changes in production trends before and after the economic crisis as well as the changes in the industrial structure. Section 7, after summing up the history of Indonesia’s industrialization examined in the previous sections, discusses problems found in respective sectors and attempts to present future prospects for the country’s manufacturing industry.
Resumo:
Foreign direct investment (FDI) can deliver both positive and negative spillovers to the local economy. Negative effects such as crowding-out or entry-barrier effects might outweigh the positive ones when the technological gap between foreign and local firms is significant. This paper examines the impact of Japanese direct investment into Korea under colonization in the 1930s on the entry of Korean-owned factories. By using the census of manufacturing factories in Korea, we exploit variations in the share of Japanese factories and their entry rates across counties within the same subsectors. We find that within a subsector, entry rates of Korean factories were higher in counties with higher presence and entry of Japanese factories. Positive correlations are also found between subsectors. The results imply that Japanese direct investment did not suppress the entry of Korean factories and that FDI could exert positive entry spillovers on indigenous firms, even at a very early stage of industrialization.
Resumo:
Coronaviruses raise serious concerns as emerging zoonotic viruses without specific antiviral drugs available. Here we screened a collection of 16671 diverse compounds for anti-human coronavirus 229E activity and identified an inhibitor, designated K22, that specifically targets membrane-bound coronaviral RNA synthesis. K22 exerts most potent antiviral activity after virus entry during an early step of the viral life cycle. Specifically, the formation of double membrane vesicles (DMVs), a hallmark of coronavirus replication, was greatly impaired upon K22 treatment accompanied by near-complete inhibition of viral RNA synthesis. K22-resistant viruses contained substitutions in non-structural protein 6 (nsp6), a membrane-spanning integral component of the viral replication complex implicated in DMV formation, corroborating that K22 targets membrane bound viral RNA synthesis. Besides K22 resistance, the nsp6 mutants induced a reduced number of DMVs, displayed decreased specific infectivity, while RNA synthesis was not affected. Importantly, K22 inhibits a broad range of coronaviruses, including Middle East respiratory syndrome coronavirus (MERS-CoV), and efficient inhibition was achieved in primary human epithelia cultures representing the entry port of human coronavirus infection. Collectively, this study proposes an evolutionary conserved step in the life cycle of positive-stranded RNA viruses, the recruitment of cellular membranes for viral replication, as vulnerable and, most importantly, druggable target for antiviral intervention. We expect this mode of action to serve as a paradigm for the development of potent antiviral drugs to combat many animal and human virus infections.
Resumo:
This paper addresses the rationale for financial cooperation in East Asia. It begins by giving a brief review of developments after the Asian currency crisis, and argues that enhancing regional financial cooperation both quantitatively and qualitatively will require: (1) upgrading surveillance capabilities in the region, and (2) creating a clear division of labor between regional institutions and the IMF. It also mentions the issue of membership and the background forces that have led to the duplication of similar forums in East Asia. Although the concern over crisis management is the central issue in East Asian financial cooperation, other issues such as exchange rate policy coordination and fostering regional capital markets are discussed as well.
Resumo:
This paper investigates Japanese trade by mode of transport, i.e., air transport versus maritime shipping. Some facts about Japanese machinery exports by mode of transport in the 1990s are examined first. Then it will be shown that products of the machinery sector where international fragmentation prevails are more likely to be exported by air.
Resumo:
This paper is an empirical investigation of the relationship between exchange rate volatility and international trade, focusing on East Asia. It finds that intra-East Asian trade is discouraged by exchange rate volatility more seriously than trade in other regions because intermediate goods trade in production networks, which is quite sensitive to exchange rate volatility compared with other types of trade, occupies a significant fraction of trade. In addition, this negative effect of volatility is mainly induced by the unanticipated volatility and has an even greater impact than that of tariffs.
Resumo:
This chapter attempts to identify some important issues in developing realistic simulation models based on new economic geography, and it suggests a direction for solving the difficulties. Specifically, adopting the IDE Geographical Simulation Model (IDE-GSM) as an example, we discuss some problems in developing a realistic simulation model for East Asia. The first and largest problem in this region is the lack of reliable economic datasets at the sub-national level, and this issue needs to be resolved in the long term. However, to deal with the existing situation in the short term, we utilize some techniques to produce more realistic and reliable simulation models. One key compromise is to use a 'topology' representation of geography, rather than a 'mesh' or 'grid' representation or simple 'straight lines' connecting each city which are used in many other models. In addition to this, a modal choice model that takes into consideration both money and time costs seems to work well.
Resumo:
This paper shows descriptively how the knowledge network in East Asia has been formed. In addition, the correlation between the knowledge network and economic growth is also examined. Evidence is provided to show that plugging into the knowledge network of developed countries could be a key for increasing innovativeness in a country.
Resumo:
This paper presents a simulation of the reduction of several components in trade cost for Asia and examines its impact on the economy. Our simulation model based on the new economic geography embraces seven sectors, including manufacturing and non-manufacturing sectors, and 1,715 regions in 18 countries/economies in Asia, in addition to the two economies of the US and the European Union. The geographical course of transactions among regions is modeled as determined based on firms’ modal choice. The model also includes estimates of some border cost measures such as tariff rates, non-tariff barriers, other border clearance costs, transshipment costs and so on. Our simulation analysis for Asia includes several scenarios involving the improvement/development of routes and the reduction of the above-mentioned border cost. We have shown that the contribution of physical and non-physical infrastructure improvements conducted together is larger than the sum of the contribution by each when conducted independently.
Resumo:
In this study, we try to elucidate the middle-income trap from the viewpoint of international trade. We conduct regression analyses on the relationship between income level and net export ratios for different types of goods for trapped and non-trapped samples separately. Our findings indicate that industrial upgrading appears to occur exactly as depicted by the flying-geese model for non-trapped countries while trapped countries tend to depend on the export of primary commodities, and industrialization appears to be driven by forward linkages to processed goods and a narrow base. The results of our analyses suggest that the middle-income trap is a form of Dutch disease or a 'resource curse' in the middle-income stage.