Oyster and mussel farming

The article discusses the oyster and mussel culture practices in western Visayas, Philippines. Spat collection, culture methods and management, and harvesting technique are discussed. The article also discusses mussel culture in New Zealand.

Present status and problems of mussel culture in India

Two species of mussels, the green mussel (Perna viridis) and the brown mussel (Perna indica) were cultured using the seed collected from the natural beds of the east and west coasts of India. The results of culture experiments are consolidated and the present status is reviewed. Although the culture experiments gave encouraging results, problems such as mooring of rafts in highly turbulent coastal waters, large scale seed requirements, control of predation, legal problems and marketing of end products require urgent attention before undertaking commercial operations. Some of the major problems of mussel culture are outlined for formulating effective management policies and their implementation for commercial mussel farming in India.

Influence of densities on the growth of brown mussel Perna perna L. cultivated in suspended socks at Caraguatatuba, southeastern Brazil

This study was carried out in a marine area at Cocanha Beach, Caraguatatuba, southeastern Brazil, aiming to determine the most appropriated density for brown mussel (Perna perna L.) cultured in suspended socks (French System), in order to reduce costs with acquisition of juvenile mussels (seed) and labor. In September 2007, 15 socks measuring 2 m each were reared at densities of 300, 400 and 500 seeds/m. After 250 days, mussels were harvested and separated in two length classes: non-commercial (<6 cm) and commercial (≥6 cm). Mussels were counted and weighed. In August 2008, the experiment was repeated with 1-m-long socks at lower densities (200, 250 and 300 seeds/m) in order to identify differences among commercial-sized mussels only. Data were analyzed by ANOVA or nonparametric Kruskal-Wallis test, followed by Tukey or SNK tests, respectively. The results suggest that it is feasible to use densities from 250 to 300 seeds/m, since biomass yields are similar to those registered at higher densities and the use of mussel seed is therefore optimized. © 2013 Springer Science+Business Media Dordrecht.

Aquaculture Asia, Vol.13, No.3, pp.1-60, July-September 2008

Comments on possible improvements to carp culture in Andhra Pradesh. Aquaculture and environmental issues in the region of Nai Lagoon, Ninh Hai district,Ninh Thuan province, Viet Nam. Climate change impacts on fi sheries and aquaculture. New initiatives in fisheries extension. Selection potential for feed efficiency in farmed salmonids. Freshwater prawn hatcheries in Bangladesh: Concern of broodstock. Production of Cirrhinus molitorella and Labeo chrysophekadion for culture based fisheries development in Lao PDR 2: Nursery culture and grow-out. Mussel farming: alternate water monitoring practice. Benefit-cost analysis for fi ngerling production of kutum Rutilus frisii kutum (Kamensky, 1901)in 2005 in Iran. The effects of feeding frequency on FCR and SGR factors of the fry of rainbow trout,Oncorhynchus mykiss. Asia-Pacific Marine Finfish Aquaculture Network Magazine: The use of poultry by-product meals in pelleted feed for humpback grouper. Production update – marine finfish aquaculture in the Asia-Pacific region. Crustacean parasites and their management in brackishwater finfish culture. NACA Newsletter

Aquaculture Asia, Vol.14, No.4, pp.1-52, October - December 2009

Sustainable aquaculture Peter Edwards writes on rural aquaculture Edwards, P. Mussel farming initiatives in North Kerala, India: A case of successful adoption of technology leading to rural livelihood transformation Laxmilatha, P., Thomas, S., Asokan, P.K., Surendranathan, V.G., Sivadasan, M.P., and Ramachandran, N.P. Selective study on the availability in indigenous fish species having ornamental value in some districts of West Bengal Panigrahi, A.K., Dutta, S. and Ghosh, I. Aquaculture livelihoods service centres in Aceh, Indonesia: A novel approach to improving the livelihoods of small scale fish farmers Ravikumar, B. and Yamamoto, K. Research and farming techniques e-Sagu Aqua - an innovative information and communication technology model for transfer of technology for aquaculture Vimala, D. D., Ravisankar, T., Mahalakshmi, P., and Kumaran, M. Freshwater pearl crop: an emerging enterprise in the Indian subcontinent Misra, G., Jena, J. and Kumar, K. Genetics and biodiversity Preliminary risk assessment of Pacific white leg shrimp (P. vannamei) introduced to Thailand for aquaculture Senanan, W., Panutrakul, S., Barnette, P., Chavanich, S., Mantachitr, V., Tangkrock-Olan, N., and Viyakarn, V. Farmer profile Aquatic animal health Asian fish health experts visit Australia Olsen, L. and Ingram, B. (Fisheries Victoria) Black gill disease of cage-cultured ornate rock lobster Panulirus ornatus in central Vietnam caused by Fusarium species Nha, V.V., Hoa, D.T. and Khoa, L.V. Marine Finfish Aquaculture Network Effects of the partial substitution fish oil by soybean oil in the diets on muscle fatty acid composition of juvenile cobia (Rachycentron canadum) Hung, P.D. and Mao, N.D. Growth response of cobia Rachycentron canadum (Pisces: Rachycentridae) under the hypersaline conditions of the Emirate of Abu Dhabi Yousif, O.M.*, Kumar, K.K. and Abdul-Rahman, A.F.A. NACA Newsletter

Nitrogen uptake of phytoplankton assemblages under contrasting upwelling and downwelling conditions: The Ría de Vigo, NW Iberia

Regenerated production (including organic nitrogen) is shown here to be important in the Ria de Vigo (Galicia, NW Iberia) in supporting both harmful algal bloom communities during the downwelling season, but also (to a lesser extent) diatom communities during stratified periods of weak to moderate upwelling. The Galician Rias, situated in the Iberian upwelling system, are regularly affected by blooms of toxic dinoflagellates, which pose serious threats to the local mussel farming industry. These tend to occur towards the end of summer, during the transition from upwelling to downwelling favourable seasons, when cold bottom shelf waters in the rias are replaced by warm surface shelf waters. Nitrate, ammonium and urea uptake rates were measured in the Ria de Vigo during a downwelling event in September 2006 and during an upwelling event in June 2007. In September the ria was well mixed, with a downwelling front observed towards the middle of the ria and relatively high nutrient concentrations (1.0-2.6 mu mol L-1 nitrate; 1.0-5.6 mu mol L-1 ammonium; 0.1-0.8 mu mol L-1 phosphate; 2.0-9.0 mu mol L-1 silicic acid) were present throughout the water column. Ammonium represented more than 80% of the nitrogenous nutrients, and the phytoplankton assemblage was dominated by dinoflagellates and small flagellates. In June the water column was stratified, with nutrient-rich, upwelled water below the thermocline and warm, nutrient-depleted water in the surface. At this time, nitrate represented more than 80% of the nitrogenous nutrients, and a mixed diatom assemblage was present. Primary phytoplankton production during both events was mainly sustained by regenerated nitrogen, with ammonium uptake rates of 0.035-0.063 mu mol N L-1 h(-1) in September and 0.078-0.188 mu mol N L-1 h(-1) in June. Although f-ratios were generally low (<0.2) in both June and September, a maximum of 0.61 was reached in June due to higher nitrate uptake (0.225 mu mol N L-1 h(-1)). Total nitrogen uptake was also higher during the upwelling event (0.153-0.366 in June and 0.053-0.096 mu mol N L-1 h(-1) in September). Nitrogen uptake kinetics demonstrated a strong preference for ammonium and urea over nitrate in June.

Effect of the environment on condition and quality of cultured blue mussels (Mytilus edulis) with reference to culture depth and post-harvest practices

The condition and quality of cultured blue mussels (Mytilus edulis) are affected by various environmental characteristics including temperature, salinity, food concentration, composition and year-to-year variability, waves, tides, and currents. Mussels are a keystone species in the ecosystem, affecting the surrounding environment through filtration, biodeposition and nutrient recycling. This study evaluated the effects of culture depth and post-harvest handling on cultured blue mussels in Newfoundland, Canada. Depth was examined over two years; three shallow water (5 m depth) and three deep water sites (15 m depth) were compared for environmental characteristics, mussel physiological stress response, growth, and biochemical composition. The area examined presented complex hydrodynamic characteristics; deep water sites appeared to be located more often near or within the pycnocline than shallow water sites. Deep water sites presented lower temperatures than shallow sites from spring to fall. Physiological stress response varied seasonally, but was unaffected by culture depth. In Year 1 shallow and deep water mussels presented similar growth, while in Year 2 deep water mussels showed better final condition. Lipid and glycogen showed seasonal variation, but no significant differences between shallow and deep water were noted. Fatty acid profiles showed a higher content of omega-3s PUFA in deep water sites at the end of Year 2. Under extreme weather conditions, deep water appeared to provide a more stable environment for mussel growth than shallow water. Harvested mussels were kept under ambient live-holding conditions for one month during the fall, winter, and spring seasons. They were compared to freshly harvested mussels for condition, biochemical profile and palatability. A progressive loss of dry tissue weight and an increase in water content were shown over the holding period during the fall and spring seasons, when compared to field controls. The biochemical analysis suggested seasonal changes; differences in triacylglycerol content were found in the spring season when compared with controls. The palatability data indicated that the panellists were unable to determine a difference between mussels kept in holding and those freshly harvested from the site. This study presents new knowledge for mussel farming, especially in terms of environmental interactions and deep water culture.

Développement de matériaux à base de protéines extraites du byssus de la moule bleue Mytilus edulis

Le byssus est un amas de fibres que les moules produisent afin de s’ancrer aux surfaces immergées sous l’eau. Ces fibres sont pourvues de propriétés mécaniques impressionnantes combinant rigidité, élasticité et ténacité élevées. De plus, elles possèdent un comportement d’auto-guérison de leurs propriétés mécaniques en fonction du temps lorsque la contrainte initialement appliquée est retirée. Les propriétés mécaniques de ces fibres sont le résultat de l’agencement hiérarchique de protéines de type copolymère blocs riches en collagène et de la présence de métaux formant des liens sacrificiels réversibles avec certains acides aminés comme les DOPA et les histidines. Bien que cette fibre soit très intéressante pour la production de matériaux grâce à son contenu élevé en collagène potentiellement biocompatible, cette ressource naturelle est traitée comme un déchet par les mytiliculteurs. L’objectif de cette thèse était de valoriser cette fibre en extrayant les protéines pour générer une nouvelle classe de matériaux biomimétiques. Un hydrolysat de protéines de byssus (BPH) riche en acides aminés chargés, i.e. ~30 % mol, et permettant de former des films a pu être généré. Lorsque solubilisé à pH 10.5, le BPH forme un hydrogel contenant des structures en triple hélice de collagène et des feuillets β anti-parallèles intra- et inter-moléculaires. Suite à l’évaporation de l’eau, le film de BPH résultant est insoluble en milieu aqueux à cause des structures secondaires très stables agissant comme points de réticulation effectifs. Les propriétés mécaniques des films de BPH sont modulables en fonction du pH. Au point isoélectrique (pI = 4.5), les interactions électrostatiques entre les charges opposées agissent comme points de réticulation et augmentent la rigidité des films et leur contrainte à la rupture sans affecter la déformation à la rupture. À pH plus élevé ou plus bas que le pI, les performances mécaniques des films sont plus faibles à cause de la répulsion entre les groupements fonctionnels de même charge qui interagissent plutôt avec les molécules d’eau et causent le gonflement de la matrice protéique des films. Le BPH contenant un nombre élevé d’acides aminés chargés et réactifs, nous avons pu réticuler les films de manière covalente à l’aide d’EDC ou de glutaraldéhyde. Les propriétés mécaniques des films sont modulables en fonction de la concentration d’EDC utilisée lors de la réticulation ou en employant du glutaraldéhyde comme agent réticulant. Les films sont à la fois plus rigides et plus forts avec un degré de réticulation élevé, mais perdent leur extensibilité à mesure que les segments libres de s’étirer lors d’une traction deviennent entravés par les points de réticulation. La réticulation augmente également la résistance à la dégradation enzymatique par la collagénase, les films les plus fortement réticulés lui étant pratiquement insensibles. La spectroscopie infrarouge montre enfin que la réticulation entraîne une transition de feuillets β anti-parallèles inter-moléculaires vers des structures de type hélices de collagène/PPII hydratées. Des liens sacrificiels ont été formés dans les films de BPH par traitement au pI et/ou avec différents métaux, i.e. Na+, Ca2+, Fe3+, afin de moduler les propriétés mécaniques statiques et d’évaluer le rôle de ces traitements sur le comportement d’auto-guérison lors de tests mécaniques cycliques avec différents temps de repos. Plus la valence des ions métalliques ajoutés augmente, plus les propriétés mécaniques statiques affichent un module, une contrainte à la rupture et une ténacité élevés sans toutefois affecter la déformation à la rupture, confirmant la formation de liens sacrificiels. Les tests mécaniques cycliques montrent que les traitements au pI ou avec Ca2+ créent des liens sacrificiels ioniques réversibles qui mènent à un processus d’auto-guérison des performances mécaniques dépendant du pH. L’ajout de Fe3+ à différentes concentrations module les performances mécaniques sur un plus large intervalle et la nature plus covalente de son interaction avec les acides aminés permet d’atteindre des valeurs nettement plus élevées que les autres traitements étudiés. Le Fe3+ permet aussi la formation de liens sacrificiels réversibles menant à l’auto-guérison des propriétés mécaniques. Les spectroscopies Raman et infrarouge confirment que le fer crée des liaisons avec plusieurs acides aminés, dont les histidines et les DOPA. Les résultats dans leur ensemble démontrent que les films de BPH sont des hydrogels biomimétiques du byssus qui peuvent être traités ou réticulés de différentes façons afin de moduler leurs performances mécaniques. Ils pourraient ainsi servir de matrices pour des applications potentielles dans le domaine pharmaceutique ou en ingénierie tissulaire.

Socio-economic profile of the Philippine National Aquasilviculture Program (PNAP) beneficiaries in Jiabong, Samar, Philippines

A total of 37 beneficiaries under the Philippine National Aquasilviculture Program (PNAP) was interviewed using the structured survey questionnaire of Socioeconomic Monitoring Guidelines for Coastal Managers in Southeast Asia (SocMon SEA). Most of the members of the households are young and in-school. Household heads’ primary occupation is fishing, a shift from mussel farming- the town’s major industry in the past decades. Perceived threat by the beneficiaries is related to the environment specifically typhoon and the problems on waste disposal. It also identified law enforcement as weak leading to dwindling fish catch, mass mortality of mussel, red tide and other problems affecting their primary sources of income. However, they could not relate these phenomena to the most likely causes. The current occupation does not provide sufficient income for the family as they seek for alternative jobs. Garbage and poor implementation of laws are among the identified problems of the beneficiaries.

Développement de matériaux à base de protéines extraites du byssus de la moule bleue Mytilus edulis

Le byssus est un amas de fibres que les moules produisent afin de s’ancrer aux surfaces immergées sous l’eau. Ces fibres sont pourvues de propriétés mécaniques impressionnantes combinant rigidité, élasticité et ténacité élevées. De plus, elles possèdent un comportement d’auto-guérison de leurs propriétés mécaniques en fonction du temps lorsque la contrainte initialement appliquée est retirée. Les propriétés mécaniques de ces fibres sont le résultat de l’agencement hiérarchique de protéines de type copolymère blocs riches en collagène et de la présence de métaux formant des liens sacrificiels réversibles avec certains acides aminés comme les DOPA et les histidines. Bien que cette fibre soit très intéressante pour la production de matériaux grâce à son contenu élevé en collagène potentiellement biocompatible, cette ressource naturelle est traitée comme un déchet par les mytiliculteurs. L’objectif de cette thèse était de valoriser cette fibre en extrayant les protéines pour générer une nouvelle classe de matériaux biomimétiques. Un hydrolysat de protéines de byssus (BPH) riche en acides aminés chargés, i.e. ~30 % mol, et permettant de former des films a pu être généré. Lorsque solubilisé à pH 10.5, le BPH forme un hydrogel contenant des structures en triple hélice de collagène et des feuillets β anti-parallèles intra- et inter-moléculaires. Suite à l’évaporation de l’eau, le film de BPH résultant est insoluble en milieu aqueux à cause des structures secondaires très stables agissant comme points de réticulation effectifs. Les propriétés mécaniques des films de BPH sont modulables en fonction du pH. Au point isoélectrique (pI = 4.5), les interactions électrostatiques entre les charges opposées agissent comme points de réticulation et augmentent la rigidité des films et leur contrainte à la rupture sans affecter la déformation à la rupture. À pH plus élevé ou plus bas que le pI, les performances mécaniques des films sont plus faibles à cause de la répulsion entre les groupements fonctionnels de même charge qui interagissent plutôt avec les molécules d’eau et causent le gonflement de la matrice protéique des films. Le BPH contenant un nombre élevé d’acides aminés chargés et réactifs, nous avons pu réticuler les films de manière covalente à l’aide d’EDC ou de glutaraldéhyde. Les propriétés mécaniques des films sont modulables en fonction de la concentration d’EDC utilisée lors de la réticulation ou en employant du glutaraldéhyde comme agent réticulant. Les films sont à la fois plus rigides et plus forts avec un degré de réticulation élevé, mais perdent leur extensibilité à mesure que les segments libres de s’étirer lors d’une traction deviennent entravés par les points de réticulation. La réticulation augmente également la résistance à la dégradation enzymatique par la collagénase, les films les plus fortement réticulés lui étant pratiquement insensibles. La spectroscopie infrarouge montre enfin que la réticulation entraîne une transition de feuillets β anti-parallèles inter-moléculaires vers des structures de type hélices de collagène/PPII hydratées. Des liens sacrificiels ont été formés dans les films de BPH par traitement au pI et/ou avec différents métaux, i.e. Na+, Ca2+, Fe3+, afin de moduler les propriétés mécaniques statiques et d’évaluer le rôle de ces traitements sur le comportement d’auto-guérison lors de tests mécaniques cycliques avec différents temps de repos. Plus la valence des ions métalliques ajoutés augmente, plus les propriétés mécaniques statiques affichent un module, une contrainte à la rupture et une ténacité élevés sans toutefois affecter la déformation à la rupture, confirmant la formation de liens sacrificiels. Les tests mécaniques cycliques montrent que les traitements au pI ou avec Ca2+ créent des liens sacrificiels ioniques réversibles qui mènent à un processus d’auto-guérison des performances mécaniques dépendant du pH. L’ajout de Fe3+ à différentes concentrations module les performances mécaniques sur un plus large intervalle et la nature plus covalente de son interaction avec les acides aminés permet d’atteindre des valeurs nettement plus élevées que les autres traitements étudiés. Le Fe3+ permet aussi la formation de liens sacrificiels réversibles menant à l’auto-guérison des propriétés mécaniques. Les spectroscopies Raman et infrarouge confirment que le fer crée des liaisons avec plusieurs acides aminés, dont les histidines et les DOPA. Les résultats dans leur ensemble démontrent que les films de BPH sont des hydrogels biomimétiques du byssus qui peuvent être traités ou réticulés de différentes façons afin de moduler leurs performances mécaniques. Ils pourraient ainsi servir de matrices pour des applications potentielles dans le domaine pharmaceutique ou en ingénierie tissulaire.

Biology and farming of the green mussel Mytilus smaragdinus

Biological investigations were carried out in Sapian Bay, Capiz from November 1975 to December 1976 with samplings conducted fortnightly. Histological studies on the gonad reveal a high percentage of ripe and spent females during the month of April and May, and ripe to near ripe during November to December. However, larval counts were highest on February 25, 1976 with 253 mytilid larvae per haul compared to 0-79 per haul during all other months. The high larval count was followed by the highest spat settlement during the next sampling period two weeks later, with the spat collector set in the water during the February 25 sampling. The four materials tested, blue polypropylene fiber rope, black polypropylene fiber, and coir rope, all had their highest spat counts during this period with an average of 471 spats per standard 10 cm rope piece. The range during the other time periods is 2-283 spats. Of the 4 materials tested, the black fibrillated polypropylene film had the highest larval counts in 15 out of a total of 25 sampling periods. The blue rope was the poorest spat collector. Coconut husk was tested later on and it proved to have a very high catchability, with spats completely enveloping the husk surface. Growth monitored from one cohort in Sapian Bay averaged 10 mm per month. 50-60 mm is considered marketable size. Trial growth experiments with transplanted mussels were also conducted at Igang Bay in Guimaras Island, Makato River in Aklan, and a milkfish pond in Leganes, Iloilo. Survival in Igang was less than 50% after the second week, and the condition of the surviving mussels can be described only as 'watery' with the mantle completely transparent. Mortality was minimal in Makato but the growth rate was only 30% that of Sapian Bay. The pond experiments were terminated due to severe crab predation.

Integrity determination of RTK solutions in precision farming applications

Integrity of Real Time Kinematic (RTK) positioning solutions relates to the confidential level that can be placed in the information provided by the RTK system. It includes the ability of the RTK system to provide timely valid warnings to users when the system must not be used for the intended operation. For instance, in the controlled traffic farming (CTF) system that controls traffic separates wheel beds and root beds, RTK positioning error causes overlap and increases the amount of soil compaction. The RTK system’s integrity capacity can inform users when the actual positional errors of the RTK solutions have exceeded Horizontal Protection Levels (HPL) within a certain Time-To-Alert (TTA) at a given Integrity Risk (IR). The later is defined as the probability that the system claims its normal operational status while actually being in an abnormal status, e.g., the ambiguities being incorrectly fixed and positional errors having exceeded the HPL. The paper studies the required positioning performance (RPP) of GPS positioning system for PA applications such as a CTF system, according to literature review and survey conducted among a number of farming companies. The HPL and IR are derived from these RPP parameters. A RTK-specific rover autonomous integrity monitoring (RAIM) algorithm is developed to determine the system integrity according to real time outputs, such as residual square sum (RSS), HDOP values. A two-station baseline data set is analyzed to demonstrate the concept of RTK integrity and assess the RTK solution continuity, missed detection probability and false alarm probability.

Farm it right : the sustainable farming simulation

Farm It Right is an innovative creative work that simulates sustainable farming techniques using ecological models prepared by academics at Bradford University (School of Life Sciences). This interactive work simulates the farming conditions and options of our ancestors and demonstrates the direct impact their actions had on their environment and on the ’future of their cultures’ (Schmidt 2008). Specifically, the simulation allows users to explore and experiment with the complex relationships between environmental factors and human decision making within the harsh conditions of an early (9th century) Nordic farm. The simulation interface displays both statistical and graphical feedback in response to the users selections regarding animal reproduction rates, shelter provisions, food supplies etc. as well as demonstrating resulting impacts to soil erosion, water supply, animal population sizes etc.---------- 'Farm It Right' is now used at Bradford University (School of Life Sciences) as a dynamic e-Learning resource for incorporating environmental archaeology with sustainable development education, improving the engagement with complex data and the appreciation of human impacts on the environment and the future of their cultures. 'Farm It Right' is also demonstrated as an exemplar case study for interaction design students at Queensland University of Technology.