An interregional input-output analysis of the pollution content of trade flows and environmental trade balances between five states in the US Mid-West

In this paper we attempt an empirical application of the multi-region input-output (MRIO) method in order to enumerate the pollution content of interregional trade flows between five Mid-West regions/states in the US –Illinois, Indiana, Iowa, Michigan and Wisconsin – and the rest of the US. This allows us to analyse some very important issues in terms of the nature and significance of interregional environmental spillovers within the US Mid-West and the existence of pollution ‘trade balances’ between states. Our results raise questions in terms of the extent to which authorities at State level can control local emissions where they are limited in the way some emissions can be controlled, particularly with respect to changes in demand elsewhere in the Mid-West and US. This implies a need for policy co-ordination between national and state level authorities in the US to meet emissions reductions targets. The existence of an environmental trade balances between states also raises issues in terms of net losses/gains in terms of pollutants as a result of interregional trade within the US and whether, if certain activities can be carried out using less polluting technology in one region relative to others, it is better for the US as a whole if this type of relationship exists.

Identifying strategies for mitigating the global warming impact of the EU-25 economy using a multi-objective input-output approach

Global warming mitigation has recently become a priority worldwide. A large body of literature dealing with energy related problems has focused on reducing greenhouse gases emissions at an engineering scale. In contrast, the minimization of climate change at a wider macroeconomic level has so far received much less attention. We investigate here the issue of how to mitigate global warming by performing changes in an economy. To this end, we make use of a systematic tool that combines three methods: linear programming, environmentally extended input output models, and life cycle assessment principles. The problem of identifying key economic sectors that contribute significantly to global warming is posed in mathematical terms as a bi criteria linear program that seeks to optimize simultaneously the total economic output and the total life cycle CO2 emissions. We have applied this approach to the European Union economy, finding that significant reductions in global warming potential can be attained by regulating specific economic sectors. Our tool is intended to aid policymakers in the design of more effective public policies for achieving the environmental and economic targets sought.

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Análisis multi-región input-output (MRIO) de emisiones de gases efecto invernadero (GEI) incorporado en el comercio. Un modelo birregional aplicado a Cataluña y el resto de España

El siguiente trabajo realiza un análisis regional y sectorial para el estudio de la emisiones de gases efecto invernadero (GEI) incorporadas en el comercio entre las regiones de Cataluña y el resto de España para el año 2001, estimando así el Balance Neto en GEI incorporado. El objetivo es el desarrollo de un metodología que nos permita realizar esta estimación de forma rigurosa, con la intención de efectuar un análisis comparativo de ambas estructuras productivas territoriales, en cuanto a la intensidad de emisión y el impacto de la demanda final de las regiones consideradas. Para este propósito se utiliza el marco metodológico del análisis input-output, en particular se aplica dos tipologías de modelos: el modelo básico o single-región y el multi-región, lo que nos permite la comparabilidad entre ambos, demostrando como el modelo MRIO (multi-región input-output) es el método más apropiado para dicho propósito, permitiendo, entre otras ventajas, analizar los vínculos interregionales e intersectoriales de las regiones consideradas. La incorporación de la técnica de la integración vertical o subsistemas, nos permite un enfoque alternativo para el Balance Neto resultante, no tenemos constancia de que este enfoque haya sido utilizado con anterioridad en los análisis MRIO aplicados al estudio de los impactos medioambientales incorporados en el comercio. Tampoco la tenemos sobre la aplicación de los MRIO de forma general para estos impactos a nivel interregional de la economía española. El principal resultado obtenido nos indica que aún teniendo Cataluña un importante superávit comercial con el resto de España, hemos comprobado la existencia de un importante déficit para la primera en cuanto a la polución incorporada en este comercio.

A comparison of input-output models: ghosh reduces to leontief (but "closing" ghosh makes it more plausible)

Ghosh's model is discussed in this paper under two alternative scenarios. In an open version we compare it with Leontief's model and prove that they reduce to each other under some specific productive conditions. We then move onto reconsidering Ghosh's model alleged implausibility and we do so reformulating the model to incorporate a closure rule. The closure solves, to some extent, the implausibility problem very clearly put out by Oosterhaven for then value-added is correctly computed and responsive to allocation changes resulting from supply shocks.

Construcción de un modelo Multi- Regional Input-Output (MRIO) medioambiental para Cataluña y el resto de España: Estudio del balance en CO2 incorporado en el comercio

El objetivo de este estudio es analizar el impacto, en emisiones de CO2, de la demanda final de Cataluña en relación a los vínculos comerciales interregionales con el resto de España y el resto del mundo. Este proceso implica el análisis del balance en CO2 incorporado para Cataluña, lo que permitirá evaluar la responsabilidad de la economía catalana respecto a estas emisiones. Para este propósito se construye, para esta determinada desagregación regional, un modelo Multi-Regional Input-Output (MRIO) extendido al medioambiente con sectores verticalmente integrados. La incorporación de la técnica de la integración vertical nos permite un enfoque alternativo para el Balance Neto y un análisis más detallado de los vínculos interregionales entre los diversos sectores productivos, centrado en la responsabilidad última de la demanda final de cada sector en cada región. Hasta el momento, los estudios previos sobre los impactos medioambientales incorporados al comercio español se han centrado principalmente en el ámbito nacional. No obstante, por un lado el comercio interregional con el resto de España en términos monetarios representa cerca de la mitad del comercio exterior catalán. Por otro lado, los distintos metabolismos energéticos de ambas economías tienen como consecuencia una importante diferencia en la intensidad de emisión en la producción de bienes y servicios. Esta situación genera para Cataluña un déficit en el Balance Neto estimado con el resto de España, aún teniendo un importante superávit monetario. De esto se desprende la importancia de integrar el nivel interregional en los estudios de los impactos medioambientales incorporados en el comercio y, en consecuencia, en la planificación y formalización de políticas económicas y ambientales a nivel nacional.

Demand and supply oriented input-output models: a linkage analysis for Portugal.

Doutoramento em Economia.

Production Networks and Spatial Economic Interdependence: An International Input-Output Analysis of the Asia-Pacific Region

The Asia-Pacific Region has enjoyed remarkable economic growth in the last three decades. This rapid economic growth can be partially attributed to the global spread of production networks, which has brought about major changes in spatial interdependence among economies within the region. By applying an Input-Output based spatial decomposition technique to the Asian International Input-Output Tables for 1985 and 2000, this paper not only analyzes the intrinsic mechanism of spatial economic interdependence, but also shows how value added, employment and CO2 emissions induced are distributed within the international production networks.

Application of the Input-Output Decomposition Technique to China's Regional Economies

Structural decomposition techniques based on input-output table have become a widely used tool for analyzing long term economic growth. However, due to limitations of data, such techniques have never been applied to China's regional economies. Fortunately, in 2003, China's Interregional Input-Output Table for 1987 and Multi-regional Input-Output Table for 1997 were published, making decomposition analysis of China's regional economies possible. This paper first estimates the interregional input-output table in constant price by using an alternative approach: the Grid-Search method, and then applies the standard input-output decomposition technique to China's regional economies for 1987-97. Based on the decomposition results, the contributions to output growth of different factors are summarized at the regional and industrial level. Furthermore, interdependence between China's regional economies is measured and explained by aggregating the decomposition factors into the intraregional multiplier-related effect, the feedback-related effect, and the spillover-related effect. Finally, the performance of China's industrial and regional development policies implemented in the 1990s is briefly discussed based on the analytical results of the paper.

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

Mapping agricultural value chains with international input-output data

In recent years, the analysis of trade in value added has been explored by many researchers. Although they have made important contributions by developing GVC-related indices and proposing techniques for decomposing trade data, they have not yet explored the method of value chain mapping—a core element of conventional value chain analysis. This paper introduces a method of value chain mapping that uses international input-output data and reveals both upstream and downstream transactions of goods and services induced by production activities of a specific commodity or industry. This method is subsequently applied to the agricultural value chain of three Greater Mekong Sub-region countries (i.e., Thailand, Vietnam, and Cambodia). The results show that the agricultural value chain has been increasingly internationalized, although there is still room for obtaining benefits from GVC participation, especially in a country such as Cambodia.

A comparison of results from MRIO and interregional computable general equilibrium (CGE) analyses of the impacts of a positive demand shock on the ‘CO2 trade balance’ between Scotland and the rest of the UK

In previous work we have applied the environmental multi-region input-output (MRIO) method proposed by Turner et al (2007) to examine the ‘CO2 trade balance’ between Scotland and the Rest of the UK. In McGregor et al (2008) we construct an interregional economy-environment input-output (IO) and social accounting matrix (SAM) framework that allows us to investigate methods of attributing responsibility for pollution generation in the UK at the regional level. This facilitates analysis of the nature and significance of environmental spillovers and the existence of an environmental ‘trade balance’ between regions. While the existence of significant data problems mean that the quantitative results of this study should be regarded as provisional, we argue that the use of such a framework allows us to begin to consider questions such as the extent to which a devolved authority like the Scottish Parliament can and should be responsible for contributing to national targets for reductions in emissions levels (e.g. the UK commitment to the Kyoto Protocol) when it is limited in the way it can control emissions, particularly with respect to changes in demand elsewhere in the UK. However, while such analysis is useful in terms of accounting for pollution flows in the single time period that the accounts relate to, it is limited when the focus is on modelling the impacts of any marginal change in activity. This is because a conventional demand-driven IO model assumes an entirely passive supply-side in the economy (i.e. all supply is infinitely elastic) and is further restricted by the assumption of universal Leontief (fixed proportions) technology implied by the use of the A and multiplier matrices. In this paper we argue that where analysis of marginal changes in activity is required, a more flexible interregional computable general equilibrium approach that models behavioural relationships in a more realistic and theory-consistent manner, is more appropriate and informative. To illustrate our analysis, we compare the results of introducing a positive demand stimulus in the UK economy using both IO and CGE interregional models of Scotland and the rest of the UK. In the case of the latter, we demonstrate how more theory consistent modelling of both demand and supply side behaviour at the regional and national levels affect model results, including the impact on the interregional CO2 ‘trade balance’.

Qualitative modelling of sustainable energy scenarios: An application and extension of the Bon Qualitative Input-Output model

Climate change is one of the major challenges facing economic systems at the start of the 21st century. Reducing greenhouse gas emissions will require both restructuring the energy supply system (production) and addressing the efficiency and sufficiency of the social uses of energy (consumption). The energy production system is a complicated supply network of interlinked sectors with 'knock-on' effects throughout the economy. End use energy consumption is governed by complex sets of interdependent cultural, social, psychological and economic variables driven by shifts in consumer preference and technological development trajectories. To date, few models have been developed for exploring alternative joint energy production-consumption systems. The aim of this work is to propose one such model. This is achieved in a methodologically coherent manner through integration of qualitative input-output models of production, with Bayesian belief network models of consumption, at point of final demand. The resulting integrated framework can be applied either (relatively) quickly and qualitatively to explore alternative energy scenarios, or as a fully developed quantitative model to derive or assess specific energy policy options. The qualitative applications are explored here.

Estimation Technique of International Input-Output Model by Non-survey Method

The Asian International Input-Output (IO) Table that is compiled by Institute of Developing Economies-JETRO (IDE), was constructed in Isard type form. Thus, it required a lot of time to publish. In order to avoid this time-lag problem and establish a more simple compilation technique, this paper concentrates on verifying the possibility of using the Chenery-Moses type estimation technique. If possible, applying the Chenery-Moses instead of the Isard type would be effective for both impact and linkage analysis (except for some countries such as Malaysia and Singapore and some primary sectors. Using Chenery-Moses estimation method, production of the Asian International IO table can be reduced by two years. And more, this method might have the possibilities to be applied for updating exercise of Asian IO table.

Evaluation of Non-Survey International IO Construction Methods with the Asian-Pacific Input-Output Table

This paper presents four non-survey methods to construct a full-information international input-output table from national IO tables and international import and export statistics, and this paper tests these four methods against the semi-survey international IO table for nine East-Asian countries and the USA, which is constructed by the Institute of Developing Economies in Japan. The tests show that the impact on the domestic flows of using self-sufficiency ratios is small, except for Singapore and Malaysia, two countries with large volumes of smuggling and transit trade. As regards the accuracy of the international flows, all methods show considerable errors, of 10%-40% for commodities and of 10%-70% for services. When more information is added, i.e. going from Method 1 to 4, the accuracy increases, except for Method 2 that generally produces larger errors than Method 1. In all, it seems doubtful whether replacing the semi-survey Asian-Pacific IO table with one of the four non-survey tables is justified, except when the semi-survey table itself is also considered to be just another estimate.