A small scale Multi-effect Distillation (MED) unit for rural micro enterprises:part I-design and fabrication

Removal of dissolved salts and toxic chemicals in water, especially at a few parts per million (ppm) levels is one of the most difficult problems. There are several methods used for water purification. The choice of the method depends mainly on the level of feed water salinity, source of energy and type of contaminants present. Distillation is an age old method which can remove all types of dissolved impurities from contaminated water. In multiple effect distillation (MED) latent heat of steam is recycled several times to produce many units of distilled water with one unit of primary steam input. This is already being used in large capacity plants for treating sea water. But the challenge lies in designing a system for small scale operations that can treat a few cubic meters of water per day, especially suitable for rural communities where the available water is brackish. A small scale MED unit with an extendable number of effects has been designed and analyzed for optimum yield in terms of total distillate produced. © 2010 Elsevier B.V.

Dessalinização da Água do Mar Através da Energia Solar - Caso de Estudo Salamansa – Cabo Verde

principal objectivo deste trabalho é o estudo da viabilidade técnica e económica da dessalinização da água do mar, utilizando a energia solar, tomando como caso de aplicação uma pequena comunidade rural de Cabo Verde, a vila piscatória de Salamansa, local onde há graves problemas com a disponibilidade de água potável. No entanto, a proximidade do mar e a disponibilidade de energia solar sugerem a dessalinização como processo para mitigar a falta de água. A dessalinização da água do mar pode ser obtida através de diversas técnicas que podem ser agrupadas de acordo com os princípios em que estes processos se baseiam: processos de dessalinização térmica (destilação solar, destilação multi-estágio, destilação multi-efeito, etc.) e processos de dessalinização por membranas (electrodiálise e osmose inversa). A destilação solar passiva foi a tecnologia de dessalinização estudada neste trabalho e que se pode vir a tornar uma alternativa promissora para um fornecimento regular de água. Por outro lado, o uso de fontes alternativas de energia, como a solar, apresenta-se como uma solução para viabilizar a dessalinização em meios semi-áridos como o deste caso de estudo. Fez-se uma modelação matemática da unidade de destilação solar proposta utilizando o Engineering Equation Solver (EES) como ferramenta para ajudar a resolver as equações de balanço térmico. O projecto do destilador solar proposto poderá atender às necessidades de água doce para consumo de 18 famílias constituídas por 5 agregados (92 pessoas) e apresenta uma eficiência média diária de aproximadamente 78% no Verão e 77% no Inverno.

Genetic parameters and estimated genetic gains in young rubber tree progenies

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

Optimization analysis of dual-purpose systems

This paper aims to analyze dual-purpose systems focusing the total cost optimization; a superstructure is proposed to present cogeneration systems and desalination technologies alternatives for the synthesis process. The superstructure consists of excluding components, gas turbines or conventional steam generators with excluding alternatives of supplying fuel for each combustion system. Also, backpressure or condensing/extraction steam turbine for supplying process steam could be selected. Finally one desalination unit chosen between electrically-driven or steam-driven reverse osmosis. multi-effect and multistage flash should be included. The analysis herein performed is based on energy and mass conservation equations, as well as the technological limiting equation of equipment. The results for ten different commercial gas turbines revealed that electrically-driven reverse osmosis was always chosen together with both natural gas and gasified biomass gas turbines. (C) 2009 Elsevier B.V. All rights reserved.

Efeito do desbaste seletivo sobre a divergência genética em progênies de Pinus caribaea Morelet var. bahamensis

The objective of this work was to study the effect of selective thinning on! the genetic divergence in progenies of Pinus caribaea var. bahamensis, aiming to identify the most productive and divergent progenies for the use of improvement program. The test of progenies containing 119 progenies and two commercial controls were planted in March 1990, using 11 x 11 square lattice design, sextuple, partially balanced, disposed in lineal plots with six trees in the spacing of 3,0 x 3,0m. 13 years after planting thinning was realized (selection for DBH), with 50% selection intensity based on Multi-effect index, leaving three trees per plot in all the experiment. The evaluations were done at four situations: A (before the thinning); B (thinned trees); C (remaining trees after thinning) and D (one year after thinning). The analyzed traits were: height, diameter at breast height (DBH), volume, form of stem and wood density. The genetic divergence among the progenies was studied with aid of the canonical variables and of clustering of Tocher method using the generalized distance matrix of Mahalanobis (D(2)) as estimate of the genetic similarity. The progenies were grouped in four groups in situation A, fourteen in the situation B, two in the situation C and three in the situation D. The selective thinning of the trees within of the progenies caused a change in the genetic divergence among the progenies, genetically homogenizing the progenies, as demonstrated by the generalized distances of Mahalanobis, clustering of Tocher' and canonical variables methods; The. thinning made possible a high uniformity in respect to the relative contribution, of the traits for the total genetic divergence. The techniques, of clustering were efficient to identify groups of divergent,progenies for the use hybridization and little divergent progenies for the use in backcross program.

Variação Genética e ganho esperado na seleção de progênies de Pinus caribaea var. caribaea em Selvíria, MS

The present research has proposed to estimate the genetic variation of growth traits and to estimate the expected gain by multi-effect index (MEI), in order to transform a Pinus caribaea var. caribaea progeny trial into a seedling seed orchard. The progeny trial was set up in 1989, in Selviria, MS, Brazil, using a 10 x 10 triple lattice design, with 99 progenies and a commercial control, with linear plots of ten plants, by the 3 x 3 m spacing between plants and rows. Total plant height, diameter at breast height (Dbh), wood volume, stem form, wood density at breast height, and survival were the evaluated quantitative traits. The trial was measured through 14, 15, and 16 years old. The 50% intensity of thinning at 14.3 years old was done. No significant was the genetic variation of different traits. Heritability estimates have presented low magnitude with low variation by the different ages. The application of MEI to DBH, at two years after thinning, resulted in higher gains than the selection of within and among progenies. The best selection strategy to obtain higher gains and to keep genetic diversity is to select until five plants per progenies.

Efeito do desbaste seletivo sobre a divergência genética em progênies de Pinus caribaea Morelet var. bahamensis

The objective of this work was to study the effect of selective thinning on the genetic divergence in progenies of Pinus caribaea var. bahamensis, aiming to identify the most productive and divergent progenies for the use of improvement program. The test of progenies containing 119 progenies and two commercial controls were planted in March 1990, using 11 × 11 square lattice design, sextuple, partially balanced, disposed in lineal plots with six trees in the spacing of 3,0 × 3,0m. 13 years after planting thinning was realized (selection for DBH), with 50% selection intensity based on Multi-effect index, leaving three trees per plot in all the experiment. The evaluations were done at four situations: A (before the thinning); B (thinned trees); C (remaining trees after thinning) and D (one year after thinning). The analyzed traits were: height, diameter at breast height (DBH), volume, form of stem and wood density. The genetic divergence among the progenies was studied with aid of the canonical variables and of clustering of Tocher method, using the generalized distance matrix of Mahalanobis (D2) as estimate of the genetic similarity. The progenies were grouped in four groups in situation A, fourteen in the situation B, two in the situation C and three in the situation D. The selective thinning of the trees within of the progenies caused a change in the genetic divergence among the progenies, genetically homogenizing the progenies, as demonstrated by the generalized distances of Mahalanobis, clustering of Tocher' and canonical variables methods. The thinning made possible a high uniformity in respect to the relative contribution of the traits for the total genetic divergence. The techniques of clustering were efficient to identify groups of divergent progenies for the use hybridization and little divergent progenies for the use in backcross program.

Efeito do desbaste seletivo nas estimativas de parâmetros genéticos em progénies de Pinus caribaea Morelet var. hondurensis

The objective of this work was to study the effect of selective thinning on the estimates of genetic parameters in progenies of Pinus caribaea var. hondurensis. The progeny test was installed in June 1986, following a 10 × 10, triple square lattice design, containing ten trees in linear plots in 3.0 × 3.0m spacing. Twelve years after the planting, a selective thinning based on Multi-effect index (selection for DBH) was performed, leaving six trees per plot. The assessments were done in four situations: A (before thinning); B (among thinned trees); C (among remnant trees at 13 years of age) and D (two years after the thinning). The following traits were analyzed: total height (H), diameter at breast height (DBH), volume (VOL), stem form (FOR), foxtail (FT), wood density at 1.3 m (WD1) and wood density at the half height (WD2). The thinning led to increase in the estimates of variability among progenies for VOL and decrease for ALT and DBH. There was a high and positive genetic correlation among the growth traits, mainly between DBH and VOL. The latter remained unchanged after thinning. The narrow-sense heritabilities at the individual level, showed a slight increase while at the family mean level had a reduction with the thinning. The estimates of breeding values increased with the thinning. This may lead to an easier identification of the best progenies in further selection.

Estratégias de seleção dentro de progênies em duas populações de myracrodruon urundeuva Fr. All.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variação genética para caracteres silviculturais e anatômicos da madeira em progênies de Myracrodruon urundeuva (Engler) Fr. Allem

The aims of this study were to evaluate the variation and to estimate genetic parameters for silvicultural anatomic wood traits for genetic breeding of a Myracrodruon urundeuva (Engler) Fr. Allem, population from Selvíria-MS. For this, from samples of a progeny test established in the Fazenda de Ensino, Pesquisa e Extensão da Faculdade de Engenharia de Ilha Solteira/UNESP, macroscopic anatomic wood traits of M. urundeuva (tangential diameter and vases frequency per mm2) and growth traits were measured (height, DBH and stem form). Genetic parameters were estimated in 28 open-pollinated progenies, in three replications and 10 plants per plot, using a REML/BLUP approach. Between the analysed traits, the DBH is the most indicated for selection for timber production, because it presented the highest values of coefficient of genetic variation, heritabilities and selective accuracy. Between the anatomic traits, the vessels frequency in the pith showed the highest values for genetic parameters. For pulp yield, based on the multi-effect index, the strategy of selecting the best trees for vessels frequency in the pith, independent of the progeny, permitted to obtain substantial gains by mass selection, without progeny test.

Estimativas de parâmetros genéticos para caracteres quantitativos em progênies de polinização aberta de Eucalyptus urophylla

Eucalyptus urophylla S. T. Blake is outstanding for valuable wood production potential, adaptation plasticity for different environmental conditions, and for tolerance to canker. However, genetic improvement of this specie in Brazil depends on the existence of genetic variability in the introduced populations. The objective of this study was to investigate the genetic variation and gains in quantitative traits in a population established in 1992 in Selvíria - MS. The progeny trial was established in a partially balanced, 8 x 8 lattice design, with 64 families, collected at Anhembi Experimental Station (IPEF/ESALQ/USP). Each plot was made up of eight trees planted in a 3 × 3 m spacing. Significant among families genetic variations were observed in diameter at breast height (DBH), bark type, stem form, and survival. Estimates of average family heritability were high for all traits, ranging from 0.50 to 0.85. The simulated selection by using multi-effect index showed that under a varying number of plants per family. This method is the most indicated to maximize genetic gains (7.24%) and the effective population size (69.3). These results are a useful support for the transformation of this test into a seedling seed orchard and to become a source of vegetative material to build a clonal seed orchard.

Análises genéticas em progênies de Pinus caribaea Morelet var. caribaea por caracteres quantitativos e marcadores moleculares

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variabilidade genética em progênies de Eucalyptus urophylla S. T. Blake para carvão vegetal

Pós-graduação em Ciência Florestal - FCA

Avaliação da variabilidade genética em uma população base de Eucalyptus camaldulensis Dehnh para fins de conservação e melhoramento genético

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversidade genética em populações de Myracrodruon urundeuva (F.F. & M.F. Allemão) utilizando caracteres quantitativos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)