A century of Reading company motive power, 1932-1941.

Mode of access: Internet.

Town gas and its uses for the production of light, heat, and motive power,

Mode of access: Internet.

A treatise on the steam-engine in its various applications to mines, mills, steam navigation, railways, and agriculture with theoretical investigations respecting the motive power of heat and the proper proportions of steam-engines, elaborate tables of the right dimensions of every part and practical instructions for the manufacture and management of every species of engine in actual use,

Mode of access: Internet.

Perpetual motion; comprising a history of the efforts to attain self-motive mechanism, with a classified, illustrated, collection and explanation of the devices whereby it has been sought and why they failed, and comprising also a revision and re-arrangement of the information afforded by "Search for self-motive power during the 17th, 18th and 19th centuries," London, 1861, and "A history of the search for self-motive power from the 13th to the 19th century," London, 1870, by Henry Dircks ...

Mode of access: Internet.

Roteiro metodológico para o estudo dos moinhos e aproveitamentos hidráulicos no concelho de Lousada

A Agência Portuguesa do Ambiente é possuidora de um valioso arquivo, resultante da atividade centenária desenvolvida pelos diferentes organismos com tutela sobre a gestão da água e o planeamento dos recursos hídricos, que importa conhecer e divulgar. O Arquivo Histórico dos Serviços Hidráulicos é um dos mais ricos acervos locais do País, reunindo um conjunto de milhares de documentos, que vão do século XIX à atualidade, constituindo um repositório documental com características ímpares e um testemunho da identidade, memória e história dos Serviços Hidráulicos. Os processos arquivados contam casos de estudo que percorrem os usos das águas públicas para diferentes fins e as modalidades da sua utilização, das quais queremos destacar os aproveitamentos hidráulicos e a laboração de moinhos. Com este artigo, pretendemos apresentar um roteiro metodológico para o estudo das formas de organização dos processos existentes no arquivo sobre os moinhos e aproveitamentos hidráulicos, no concelho de Lousada, no que respeita aos documentos e peças anexas, bem como aos modelos administrativos subjacentes.

A inteligência competitiva como difusora da ação estratégica: diagnóstico do setor vinícola de Bento Gonçalves - RS

The transformation that occurs in the scenery of the companies at this moment, leads them to a competitive environment, making exist more demands of the organizations, turning them more efficient. The companies search each time for more knowledge to follow this transformation, existing the concerning in the adequate way of arranging an organizational strategy that really works. The companies that really get to stand out through a clear, flexible and evolutive strategy have some strength that leads them, followed by directed information to the development of this strategy. This essay analyses the competitive intelligence of the winegrowing sector of Bento Gonçalves, through the establishment of the variable motive-power, organizational strategy and distinguished information. This way, we seek to make a research of this sector improving its peculiarities. The essay starts with the definition of the problem, characterizing the sector through a historic, problem and studied theme. On the theoretical reference, there is an evolution through the variable considered vital to the instauration of the competitive intelligence, beginning from the information to motive-power, organizational strategy, to the strategic information directed to the action. The results of this essay are in a chapter (Competitive Intelligence Analysis), which has the objective to analyze the research through a diagnosis of the winegrowing sector. This essay evaluates the winegrowing sector of Bento Gonçalves, with clear and defined strategies according to its objectives, but it¿s still not achieving in its greatest part to establish an organizational competitive intelligence.

Alternative fueled vehicle fleet safety experience: summary report.

National Highway Traffic Safety Administration, Washington, D.C.

Alternative-fueled vehicles: progress made in accelerating federal purchases, but benefits and costs remain uncertain.

Mode of access: Internet.

Estudo do comportamento da sinterização de compactos de cavacos de um aço SAE 1050 obtidos sob alta pressão

From an economic standpoint, the powder metallurgy (P/M) is a technique widely used for the production of small parts. It is possible, through the P/M and prior comminution of solid waste such as ferrous chips, produce highly dense sintered parts and of interest to the automotive, electronics and aerospace industries. However, without prior comminution the chip, the production of bodies with a density equal to theoretical density by conventional sintering techniques require the use of additives or significantly higher temperatures than 1250ºC. An alternative route to the production of sintered bodies with high density compaction from ferrous chips (≤ 850 microns) and solid phase sintering is a compression technique under high pressure (HP). In this work, different compaction pressures to produce a sintered chip of SAE 1050 carbon steel were used. Specifically, the objective was to investigate them, the effect of high pressure compression in the behavior of densification of the sintered samples. Therefore, samples of the chips from the SAE 1050 carbon steel were uniaxially cold compacted at 500 and 2000 MPa, respectively. The green compacts obtained were sintered under carbon atmosphere at 1100 and 1200°C for 90 minutes. The heating rate used was 20°C/min. The starting materials and the sintered bodies were characterized by optical microscopy, SEM, XRD, density measurements (geometric: mass/volume, and pycnometry) and microhardness measurements Vickers and Rockwell hardness. The results showed that the compact produced under 2000 MPa presented relative density values between 93% and 100% of theoretical density and microhardness between 150 HV and 180 HV, respectively. In contrast, compressed under 500 MPa showed a very heterogeneous microstructure, density value below 80% of theoretical density and structural conditions of inadequate specimens for carrying out the hardness and microhardness measurements. The results indicate that use of the high pressure of ferrous chips compression is a promising route to improve the sinterability conditions of this type of material, because in addition to promoting greater compression of the starting material, the external tension acts together with surface tension, functioning as the motive power for sintering process. Additionally, extremely high pressures allow plastic deformation of the material, providing an intimate and extended contact of the particles and eliminating cracks and pores. This tends to reduce the time and / or temperature required for good sintering, avoiding excessive grain growth without the use of additives. Moreover, higher pressures lead to fracture the grains in fragile or ductile materials highly hardened, which provides a starting powder for sintering, thinner, without the risk of contamination present when previous methods are used comminution of the powder.

Análise da força propulsora do motor de indução linear alimentado com imposição de corrente

This work intent to study the motive power provided by the plane linear induction motor, in a lock condition. It uses a method of imposition of the electric current to the stator via a frequency convertor PWM driven by a refed platform. The reading of the motive power was performed by a load cell using an electronic circuit for reading and conditioning of the signal. Aiming a complete analysis of the linear motor, it was performed a computational modeling that employs all relevant parameters to the study of the locked machine. At the end it was held a theoric-experimental confrontation that evaluated the effectiveness of the proposed method.

Implicit Motives of Elite Athletes, Sport Students, and Non-Sport Students: Power, Affiliation, and Achievement

Research on performance and participation in (elite) sports has predominantly focused on variables relating to the achievement motive. However, some authors describe that athletes in interactive sports (e.g. tennis) are assumed to exhibit a strong power motive in order to win competitive matches, usually resulting in the demonstration of dominance or the experience of inferiority. The affiliation motive, by contrast, is not functional in elite sports due to their competitive rather than social character. In the present chapter we discuss how the three basic implicit motives of power, affiliation, and achievement relate to the sports field and describe how they can affect athletes’ performance. We present empirical evidence for the existence of different strengths of the three basic motives in three studies with elite athletes (Study 1), non-elite athletes (sport students, Study 2), and non-sport students infrequently involved in sports (Study 3). Our results suggest that elite athletes show higher levels of the implicit power motive compared to sport students, who in turn have higher power motives than non-sport students. Surprisingly, elite athletes do not differ from non-sport students regarding their implicit achievement motive. Moreover, non-sport students exhibit higher implicit affiliation motive scores than sport students and elite athletes. We propose that research on motivational processes of highly competitive athletes should – in addition to the achievement motive – focus more on motive themes like the implicit motives of power and affiliation.

Comparação entre métodos para mensuração da potência aeróbia em atletas tetraplégicos= : Comparison of methods for aerobic power assessment in athletes with tetraplegia

Universidade Estadual de Campinas . Faculdade de Educação Física

Reliability and discriminatory power of methods for dental plaque quantification

OBJECTIVE: This in situ study evaluated the discriminatory power and reliability of methods of dental plaque quantification and the relationship between visual indices (VI) and fluorescence camera (FC) to detect plaque. MATERIAL AND METHODS: Six volunteers used palatal appliances with six bovine enamel blocks presenting different stages of plaque accumulation. The presence of plaque with and without disclosing was assessed using VI. Images were obtained with FC and digital camera in both conditions. The area covered by plaque was assessed. Examinations were done by two independent examiners. Data were analyzed by Kruskal-Wallis and Kappa tests to compare different conditions of samples and to assess the inter-examiner reproducibility. RESULTS: Some methods presented adequate reproducibility. The Turesky index and the assessment of area covered by disclosed plaque in the FC images presented the highest discriminatory powers. CONCLUSION: The Turesky index and images with FC with disclosing present good reliability and discriminatory power in quantifying dental plaque.