Y2O3 stabilized ZrO2 thin films deposited by electron beam evaporation: Structural, morphological characterization and laser induced damage threshold

Four kinds of Y2O3 stabilized ZrO2 (YSZ) thin films with different Y2O3 content have been prepared on BK7 substrates by electron-beam evaporation method. Structural properties and surface morphology of thin films were investigated by X-ray diffraction (XRD) spectra and scanning probe microscope. Laser induced damage threshold (LIDT) was determined. It was found that crystalline phase and microstructure of YSZ thin films was dependent on Y2O3 molar content. YSZ thin films changed from monoclinic phase to high temperature phase (tetragonal and cubic) with the increase of Y2O3 content. The LIDT of stabilized thin film is more than that of unstabilized thin films. The reason is that ZrO2 material undergoes phase transition during the course of e-beam evaporation resulting in more numbers of defects compared to that of YSZ thin films. These defects act as absorptive center and the original breakdown points. (c) 2006 Elsevier B.V. All rights reserved.

Genetic and morphological characterization of Cladobotryum species causing cobweb disease of mushrooms

Cladobotryum dendroides (= Dactylium dendroides) has hitherto been regarded as the major causal agent of cobweb disease of the cultivated mushroom, Agaricus bisporus. Nucleotide sequence data for the internal transcribed spacer (ITS) regions of four Cladobotryum/Hypomyces species reported to be associated with cobweb disease, however, indicate that the most common pathogen is now C. mycophilum. This cobweb pathogen varies somewhat in conidial septation from published descriptions of C. mycophilum and lacks the distinctive colony odor. ITS sequencing revealed minor nucleotide variation which split isolates of the pathogen into three subgroups, two comprising isolates that were sensitive to methylbenzimidazole carbamate (MBC) fungicides and one comprising MBC-resistant isolates. The MBC-resistant isolates, which were only obtained from Ireland and Great Britain, clustered together strongly in randomly amplified polymorphic DNA (RAPD) PCR analysis, suggesting that they may be clonal. The MBC-sensitive isolates were more diverse. A RAPD fragment of 800 to 900 bp, containing a microsatellite and found in the MBC-resistant isolates, also indicated their clonal nature; the microsatellites of these isolates contained the same number of GA repeats. Smaller, polymorphic microsatellites, similarly comprising GA repeats, in the MBC-sensitive isolates in general correlated with their geographic origin.

Morphological characterization of periodontium-derived human stem cells

The aim of this study has been to characterize adult human somatic periodontium-derived stem cells (PDSCS) isolated from human periodontium and to follow their differentiation after cell culture. PDSCS were isolated from human periodontal tissue and cultured as spheres in serum-free medium. After 10 days the primary spheres were dissociated and the secondary spheres sub-cultured for another 1-2 weeks. Cells from different time points were analyzed, and immunohistochemical and electron microscopic investigations carried out. Histological analysis showed differentiation of spheres deriving from the PDSCS with central production of extracellular matrix beginning 3 days after sub-culturing. Isolated PDSCS developed pseudopodia which contained actin. Tubulin was found in the central portion of the cells. Pseudopodia between different cells anastomosed, indicating intercellular transport. Immunostaining for osteopontin demonstrated a positive reaction in primary spheres and within extracellular matrix vesicles after sub-culturing. In cell culture under serum-free conditions human PDSCS form spheres which are capable of producing extracellular matrix. Further investigations have do be carried out to investigate the capability of these cells to differentiate into osteogenic progenitor cells.

Mechanical, thermal and morphological characterization of polypropylene/biodegradable polyester blends with additives

The (bio)degradation of polyolefins can be accelerated by modifying the level of crystallinity or by incorporation of carbonyl groups by adding pro-oxidants to masterbatches or through exposure to ultraviolet irradiation. In this work we sought to improve the degradation of PP by adding cobalt, calcium or magnesium stearate to Ecoflex(R), PP or Ecoflex(R)/PP blends. The effect of the pro-oxidants on biodegradability was assessed by examining the mechanical properties and fluidity of the polymers. PP had higher values for tensile strength at break and Young`s modulus than Ecoflex(R), and the latter had little influence on the properties of PP in Ecoflex(R)/PP blends. However, the presence of pro-oxidants (except for calcium) reduced these properties. All of the pro-oxidants enhanced the fluidity of PP, a phenomenon that facilitated polymer degradation at high temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Molecular and morphological characterization of bis benzimidazo perylene films and surface-enhanced phenomena

Thin solid films of bis benzimidazo perylene (AzoPTCD) were fabricated using physical vapor deposition (PVD) technique. Thermal stability and integrity of the AzoPTCD PVD films during the fabrication (similar to 400 degrees C at 10(-6) Torr) were monitored by Raman scattering. Complementary thermogravimetric results showed that thermal degradation of AzoPTCD occurs at 675 degrees C. The growth of the PVD films was established through UV-vis absorption spectroscopy, and the surface morphology was surveyed by atomic force microscopy (AFM) as a function of the mass thickness. The AzoPTCD molecular organization in these PVD films was determined using the selection rules of infrared absorption spectroscopy (transmission and reflection-absorption modes). Despite the molecular packing, X-ray diffraction revealed that the PVD films are amorphous. Theoretical calculations (density functional theory, B3LYP) were used to assign the vibrational modes in the infrared and Raman spectra. Metallic nanostructures, able to sustain localized surface plasmons (LSP) were used to achieve surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF).

Morphological characterization of rat incisor fluorotic lesions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological characterization of cell death during the ovary differentiation in worker honey bee

Cell death that occurs during ovary differentiation in the honeybee worker's larval development accounts for ovariole reabsorption. From a morphological standpoint, three modes of death were detected. Germinative cells in the ovarioles die by an apoptotic-like process, whereas the somatic cells die by an autophagic process, type 11 cell death; and during pupation, stromatic and ovarian capsular cells die through cytoplasmic disintegration, releasing their components into the hemolymph. These modes of cell death are in part determined by the pattern of tissue organization within which the cell occurs. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Morphological characterization of the ovary and vitellogenesis dynamics in the tick Amblyomma cajennense (Acari : Ixodidae)

In this work we describe the internal morphology of the female reproductive system of the cayenne tick Amblyomma cajennense. This system is represented by a panoistic ovary, which lacks nurse cells in the germarium. This ovary consists of a single tube, in which a large number of oocytes develop asynchronously, thus accompanying the processes of yolk deposition in the oocytes. The oocytes were classified into stages that varied from I to V, according to: cytoplasm appearance, presence of the germ vesicle, presence of yolk granules, and presence of chorion. The study of vitellogenesis dynamics suggest that the yolk elements are deposited in the oocyte following a preferencial sequence, in which the lipids are the first to appear, followed by proteins an finally by the carbohydrates. In this way the yolk of A. cajennense ticks have these three elements that may be free in the cytoplasm or chemically bounded forming glycoprotein or lipoprotein complexes. (C) 2004 Elsevier B.V. All rights reserved.

Morphological characterization of the ovary and oocytes vitellogenesis of the tick Rhipicephalus sanguineus (Latreille, 1806) (Acari : Ixodidae)

This study presents the morphology of the ovary, as well as the process of the vitellogenesis in oocytes of the tick Rhipicephalus sanguineus. The ovary of these individuals is of the panoistic type; therefore, it lacks nurse cells. This organ consists of a single tubular structure, continuous, and composed of a wall formed by small epithelial cells with rounded nuclei which delimit the lumen. The oocytes in the different developmental stages in this tick species were classified into five stages (I V). They remain attached to the ovary during vitellogenesis by a cellular pedicel and afterwards the mature oocytes (stage V) are released into the ovary lumen. (c) 2005 Elsevier B.V. All rights reserved.

Morphological characterization of the nymphs rhipicephalus sanguineus ticks (Latreille, 1806) (Acari: Ixodidae). Description of the testes, integument, malpighian tubules, and midgut on the detachment day

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological characterization of the proventriculus of Gryllus assimilis Fabricius (Orthoptera, Gryllidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological characterization and reproductive aspects in genetic variability studies of forage peanut

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphological characterization of Langmuir-Blodgett films from polyaniline and a ruthenium complex (Rupy): influence of the relative concentration of Rupy

We report on the use of dynamic scale theory and fractal analyses in a study of the growth stages of Langmuir-Blodgett (LB) films of polyaniline and a neutral biphosphinic ruthenium complex, namely mer-[ RuCl3 (dppb)(py)] (dppb = 1,4-bis(diphenylphosphine) buthane, py = pyridine), Rupy. The LB films were deposited onto indium-tin-oxide substrates and characterized with atomic force microscopy. From the granular morphology exhibited by the films one could infer growth processes inside and outside the grains. Growth outside was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of about 2.7. As one would expect, inside the grains the morphology is close to a Euclidian surface with fractal dimension of about 2.

Morphological characterization of the venom secretory epidermal cells in the stinger of marine and freshwater stingrays

Marine and freshwater stingrays are characterized by the presence of one to three mineralized serrated stingers on the tail, which are covered by epidermal cells secreting venom. When these animals are dorsally touched, the stinger can be introduced into the aggressor by a whip reflex mechanism of the tail, causing severe mechanical injuries and inoculating the venom. Accidents in humans are frequent causing intense local pain, oedema and erythema. Bacterial secondary infection is also common. In addition, injuries involving freshwater stingrays frequently cause a persistent cutaneous necrosis. The exact localization of the venom secretory epidermal cells in the stinger is controversial, but it is known that it is preferentially located in the ventrolateral grooves. A comparative morphological analysis of the stinger epidermal tissue of different marine and freshwater Brazilian stingray species was carried out. The results indicate that in freshwater species there is a larger number of protein secretory cells, of two different types, spread over the whole stinger epidermis, while in marine species the protein secretory cells are located only around or inside the stinger ventrolateral grooves. These differences between the stingers of the two groups can justify the more severe envenomation accidents with the freshwater species when compared with the marine species. (c) 2007 Elsevier Ltd. All rights reserved.