Supplemental environmental impact : proposed designation of critical habitat for the Hawaiian monk seal in the northwestern Hawaiian Islands.

At head of title: Supplemental environmental impact statement.

A Review of Interactions Between Hawaii's Fisheries and Protected Species

Several fisheries in Hawaii are known to have interactions with protected cetaceans, seabirds, marine turtles, or seals. Handline fisheries for bottomfish, tuna, and mackerel scad lose bait and catch to bottlenose dolphins, rough-toothed dolphins, and Hawaiian monk seals. Troll fisheries for billfish lose live bait to bottlenose dolphins, rough-toothed dolphins, albatrosses, and boobies; these fisheries may also lose catch to false killer whales. A longline fishery for tuna and billfish has burgeoned in Hawaii since 1987, resulting in interactions with protected species; marine turtles, seabirds, and monk seals take bait and are known to become hooked, and false killer whales may take catch. Research on deterrents or alternative fishing methods has been limited, and interactions have been reduced primarily through management and regulatory actions. These include area closures and gear requirements. An observer program has also been established for the bottomfish and longline fisheries.

Historic and recent occurrences of pinnipeds in the Archipelago of the Azores

The Archipelago of the Azores (Portugal) is located between 378 and 418N and 258 and 318W and crosses the Mid-Atlantic Ridge. It is the most isolated archipelago in the Atlantic, situated 1600 km west of mainland Portugal and 3500 km from the eastern coast of the United States of America. At present, the only population of seals occurring in the Portuguese territory is found on Desertas Islands, Archipelago of Madeira, where a colony of 24 Mediterranean monk seals, Monachus monachus (Hermann, 1779), still persists (Pires and Neves 2001). Nonetheless, historical accounts reported by Frutuoso (1983) dating from the early to late 1500s mention sightings of ‘‘sea wolves’’ (the old Portuguese folk term for the Mediterranean monk seal) at several sites along the Azorean Island of Santa Maria. Little is known about the occurrence of monk seals in this area over the past five centuries, but the species certainly did not escape deliberate killing by the first settlers. While the early monk seal reports by Frutuoso (1983) are the only reports referring to the presence of colonies of seals in the Azores, more recently several sightings and strandings of vagrant seals of other species have been noted.

Restos óseos de Lobos marinos en la Cueva de Villaverde (Fuerteventura)

[EN] During the archaeological excavations carried out in the Villaverde Cave sorne bone remains (left mandible fragment, proximal fragment of scapula and two left humerus) of two specimes of monk seals (Monachus cf. monachus) were found. Toe cave, which is a vokanic tunnel, was occupied during the firts Centuries of our Era by the former inhabitants of the Fuerteventura Island. Toe monk seals,named in the past in Canaries "Lobos marinos", were very numerous according to the Chronicles of the Conquerers (1404-1408) and for that reason the small island situated between Lanzarote and Fuerteventura lslands was named '"Isla de Lobos". These seals became extinct at the end of the XV Century and the remains found at Villaverde are the only ones known.

Use of anthropogenic sea floor structures by Australian fur seals: potential positive ecological impacts of marine industrial development?

Human-induced changes to habitats can have deleterious effects on many species that occupy them. However, some species can adapt and even benefit from such modifications. Artificial reefs have long been used to provide habitat for invertebrate communities and promote local fish populations. With the increasing demand for energy resources within ocean systems, there has been an expansion of infrastructure in near-shore benthic environments which function as de facto artificial reefs. Little is known of their use by marine mammals. In this study, the influence of anthropogenic sea floor structures (pipelines, cable routes, wells and shipwrecks) on the foraging locations of 36 adult female Australian fur seals (Arctocephalus pusillus doriferus) was investigated. For 9 (25%) of the individuals, distance to anthropogenic sea floor structures was the most important factor in determining the location of intensive foraging activity. Whereas the influence of anthropogenic sea floor structures on foraging locations was not related to age and mass, it was positively related to flipper length/standard length (a factor which can affect manoeuvrability). A total of 26 (72%) individuals tracked with GPS were recorded spending time in the vicinity of structures (from <1% to >75% of the foraging trip duration) with pipelines and cable routes being the most frequented. No relationships were found between the amount of time spent frequenting anthropogenic structures and individual characteristics. More than a third (35%) of animals foraging near anthropogenic sea floor structures visited more than one type of structure. These results further highlight potentially beneficial ecological outcomes of marine industrial development.

Development of a high-speed sensing and detection system for automatic removal of packages with leaky seals from a high-speed food processing and packaging line

Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large amounts of money due to product recalls, consumer impact and subsequent loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and microorganisms to enter the package. In the food processing and packaging industry worldwide, there is an increasing demand for cost effective state of the art inspection technologies that are capable of reliably detecting leaky seals and delivering products at six-sigma. The new technology will develop non-destructive testing technology using digital imaging and sensing combined with a differential vacuum technique to assess seal integrity of food packages on a high-speed production line. The cost of leaky packages in Australian food industries is estimated close to AUD $35 Million per year. Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large sums of money due to product recalls, compensation claims and loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and micro-organisms to enter the package. Flexible plastic packages are widely used, and are the least expensive form of retaining the quality of the product. These packets can be used to seal, and therefore maximise, the shelf life of both dry and moist products. The seals of food packages need to be airtight so that the food content is not contaminated due to contact with microorganisms that enter as a result of air leakage. Airtight seals also extend the shelf life of packaged foods, and manufacturers attempt to prevent food products with leaky seals being sold to consumers. There are many current NDT (non-destructive testing) methods of testing the seal of flexible packages best suited to random sampling, and for laboratory purposes. The three most commonly used methods are vacuum/pressure decay, bubble test, and helium leak detection. Although these methods can detect very fine leaks, they are limited by their high processing time and are not viable in a production line. Two nondestructive in-line packaging inspection machines are currently available and are discussed in the literature review. The detailed design and development of the High-Speed Sensing and Detection System (HSDS) is the fundamental requirement of this project and the future prototype and production unit. Successful laboratory testing was completed and a methodical design procedure was needed for a successful concept. The Mechanical tests confirmed the vacuum hypothesis and seal integrity with good consistent results. Electrically, the testing also provided solid results to enable the researcher to move the project forward with a certain amount of confidence. The laboratory design testing allowed the researcher to confirm theoretical assumptions before moving into the detailed design phase. Discussion on the development of the alternative concepts in both mechanical and electrical disciplines enables the researcher to make an informed decision. Each major mechanical and electrical component is detailed through the research and design process. The design procedure methodically works through the various major functions both from a mechanical and electrical perspective. It opens up alternative ideas for the major components that although are sometimes not practical in this application, show that the researcher has exhausted all engineering and functionality thoughts. Further concepts were then designed and developed for the entire HSDS unit based on previous practice and theory. In the future, it would be envisaged that both the Prototype and Production version of the HSDS would utilise standard industry available components, manufactured and distributed locally. Future research and testing of the prototype unit could result in a successful trial unit being incorporated in a working food processing production environment. Recommendations and future works are discussed, along with options in other food processing and packaging disciplines, and other areas in the non-food processing industry.

Numerical Investigations for Leakage and Windage Heating in Straight-Through Labyrinth Seals

The ability to quantify leakage flow and windage heating for labyrinth seals with honeycomb lands is critical in understanding gas turbine engine system performance and predicting its component life. Variety of labyrinth seal configurations (number of teeth, stepped or straight, honeycomb cell size) are in use in gas turbines, and for each configuration, there are many geometric factors that can impact a seal's leakage and windage characteristics. This paper describes the development of a numerical methodology aimed at studying the effect of honeycomb lands on leakage and windage heating. Specifically, a three-dimensional computational fluid dynamics (CFD) model is developed utilizing commercial finite volume-based software incorporating the renormalization group (RNG) k-epsilon turbulence model with modified Schmidt number. The modified turbulence model is benchmarked and fine-tuned based on several experiments. Using this model, a broad parametric study is conducted by varying honeycomb cell size, pressure ratio (PR), and radial clearance for a four-tooth straight-through labyrinth seal. The results show good agreement with available experimental data. They further indicate that larger honeycomb cells predict higher seal leakage and windage heating at tighter clearances compared to smaller honeycomb cells and smooth lands. However, at open seal clearances larger honeycomb cells have lower leakage compared to smaller honeycomb cells.

Toxic pollutants, health indices and population dynamics of Harbor Seals in San Francisco Bay, 1989-1992

(PDF contains 300 pages)

Experiments in the marking of seals and sea-lions

This report reviews experiments in the marking, for study purposes, of seals, sea-lions, and fur seals in the North Atlantic, North Pacific, and Antarctic regions. Also discussed are the results of studies of the northern fur seal, especially the series from 1940 to 1049 carried out by U.S. Government agents on the Pribilof Islands, Alaska. (PDF contains 38 pages)

Status, biology, and ecology of fur seals: Proceedings of an International Symposium and Workshop Cambridge, England, 23-27 April 1984

The 1984 International Symposium and Workshop on the Biology of Fur Seals originated in informal talks in 1981. However, the scope and focus of the symposium remained unclear until an informal workshop was held in San Diego in June 1983. This meeting synthesised data on the foraging and pup attendance activities of six species of fur seals, and attempted to formulate a coherent framework for the adaptations associated with their maternal strategies (Gentry et al. 1986). During the workshop it was clear that comparative data on many key aspects of fur seal biology and ecology were missing. This absence of data applied not only to less well known species, for some of which considerable unpublished data existed, but also to better known species for which research in some areas had either been neglected or unreported. The value of applying the comparative method to seals, especially comparisons integrating physiology, ecology, and reproductive biology, was amply demonstrated by the results of the 1983 workshop (Gentry and Kooyman 1986). However, we were also aware that many other problems outside the area of maternal strategies could benefit from comparative data, such as recovery of populations from the effects of harvesting. Therefore, to accommodate the range of potential research, we organized this symposium to produce an up-to-date synthesis of relevant information for all species of fur seals. It was also clear that fur seal research could benefit from increased communication and collaboration among its practitioners. To foster the spread of ideas, we held oral presentations on some topics of current research and techniques and organized workshops on specific topics, in addition to providing opportunities for informal talks among participants. Thanks to generous support from the British Antarctic Survey, the National Marine Fisheries Service of the United States, and the Scientific Committee on Antarctic Research, the International Fur Seal Symposium was held at the British Antarctic Survey, Cambridge, England, 23-27 April 1984. The 36 participants are shown in Figure 1. A list of Symposium participants and authors is presented in Appendix 1 of the Proceedings. (PDF file contains 220 pages.)