Virtual worlds as a model-view approach to the communication of business processes models

The improvement and optimization of business processes is one of the top priorities in an organization. Although process analysis methods are mature today, business analysts and stakeholders are still hampered by communication issues. That is, analysts cannot effectively obtain accurate business requirements from stakeholders, and stakeholders are often confused about analytic results offered by analysts. We argue that using a virtual world to model a business process can benefit communication activities. We believe that virtual worlds can be used as an efficient model-view approach, increasing the cognition of business requirements and analytic results, as well as the possibility of business plan validation. A healthcare case study is provided as an approach instance, illustrating how intuitive such an approach can be. As an exploration paper, we believe that this promising research can encourage people to investigate more research topics in the interdisciplinary area of information system, visualization and multi-user virtual worlds.

A functional coefficient model view of the Feldstein–Horioka puzzle

What does the saving–investment (SI) relation really measure and how should the SI relation be measured? These are two of the most discussed issues triggered by the so-called Feldstein–Horioka puzzle. Based on panel data we introduce a new variant of functional coefficient models that allows to separate long and short to medium run parameter dependence. The new modeling framework is applied to uncover the determinants of the SI relation. Macroeconomic state variables such as openness, the age dependency ratio, government current and consumption expenditures are found to affect the SI relation significantly in the long run.

Passive MVC och MVVM designmönster i Android : En jämförelse av kodkomplexitet mellan Passive MVC och MVVM

Det mobila operativsystemet Android är idag ett ganska dominerande operativsystem på den mobila marknaden dels på grund av sin öppenhet men också på grund av att tillgängligheten är stor i och med både billiga och dyra telefoner finns att tillgå. Men idag har Android inget fördefinierat designmönster vilket leder till att varje utvecklare får bestämma själv vad som ska användas, vilket ibland kan leda till onödigt komplex kod i applikationerna som sen blir svårtestad och svårhanterlig. Detta arbete ämnar jämföra två designmönster, Passive Model View Controller (PMVC) och Model View View-Model (MVVM), för att se vilket designmönster som blir minst komplext med hjälp av att räkna fram mätvärden med hjälp av Cyclomatic Complexity Number (CCN). Studien är gjord utifrån arbetssättet Design & Creation och ämnar bidra med: kunskap om vilket mönster man bör välja, samt om CCN kan peka ut vilka delar i en applikation som kommer att ta mer eller mindre lång tid att testa. Under studiens gång tog vi även fram skillnader på om man anväder sig av den så kallade Single Responsibilyt Principle (SRP) eller inte. Detta för att se om separerade vyer gör någon skillnad i applikationernas komplexitet. I slutändan så visar studien på att komplexiteten i små applikationer är väldigt likvärdig, men att man även på små applikationer kan se skillnad på hur komplex koden är men också att kodkomplexitet på metodnivå kan ge riktlinjer för testfall.

Thermodynamic activities in the Pb(Zr1−XTiX)O3 solid solution at 1373K

Although Pb(Zr1−XTiX)O3 solid solution is the cornerstone of the piezoelectric ceramics, there is no information in the literature on thermodynamic activities of the component phases in the solid solution. Using inter-crystalline ion exchange equilibria between Pb(Zr1−XTiX)O3 solid solution with cubic perovskite structure and (Zr1−YTiY)O2 solid solutions with monoclinic and tetragonal structures, activities of PbTiO3 and PbZrO3 in the perovskite solid solution have been derived at 1373 K using the modified Gibbs–Duhem integration technique of Jacob and Jeffes. Tie-lines from the cubic solid solution are skewed towards the ZrO2 corner. Activities in the zirconia-rich (Zr1−YTiY)O2 solid solutions are taken from a recent emf study. The results for the perovskite solid solution at 1373 K can be represented by a sub-regular solution model:View the MathML sourcewhere ΔGE,M is the excess Gibbs energy of mixing of the cubic solid solution and Xi represents the mole fraction of component i. There is a significant positive deviation from ideality for PbTiO3-rich compositions and mild negative deviation near the PbZrO3 corner. The cubic solid solution is intrinsically stable against composition fluctuations at temperatures down to 840 K. The results contrast sharply with the recent calorimetric data on enthalpy of mixing which signal instability of the cubic perovskite solid solution.

Generación dinámica de parrillas de productos en Magento en base al análisis de datos de fuentes abiertas

En este Trabajo de Fin de Grado desarrollado en la empresa On4U, se ha implementado un módulo para Magento, cuya función principal es la generación dinámica de parrillas de productos en base al análisis del tiempo meteorológico, teniendo en cuenta la localización del cliente. Además, el módulo guarda automáticamente las compras efectuadas, junto con la información externa, para un posible análisis posterior que relacione los hábitos de compra con el tiempo meteorológico. Aunque se haya centrado en este caso de uso, se ha desarrollado con un enfoque modular, de tal manera que fuese fácil de integrar en el módulo el uso de otra fuente abierta de información. Para poder realizar el proyecto, se ha tenido que profundizar en varios conceptos relacionados con la plataforma de eCommerce Magento, entre ellos, el patrón Modelo-Vista-Controlador y el ciclo de vida de una petición.

Arquitetura de software para a manutenção de dados da Agência de Informação Embrapa.

A agencia de informação Embrapa disponibiliza na internet informação qualificada e organizada e, muitas vezes, também aquelas geradas pela própria Embrapa. As soluções de software esposta neste trabalho são dirigidas ao gerenciamento dessas informações, que são armazenadas em base de dados centralizada e atualizada via internet por aplicativos deste sistema. O objetivo de apresentar essas soluções é contribuir para o desenvolvimento de sistemas com orientação metodológica similar. Este sistema teve como principal identificação de requisitos as falhas existentes na primeira versão do mesmo, que foi orientada exclusivamente para manipulação de dados formatados em XML. A nova versão traz uma arquitetura baseada nas orientações Java 2 Enterprise Editon (J2EE): modelo em camadas (orientação Model View Controler-MVC), uso de containers e sistema gerenciador de banco de dados. O resultado é um sistema mais robusto em seu todo, além das melhorias de manutenabilidade. Termos para indexação:J2EE, XML, PDOM, Model view controller- MVC, Oracle.

Specification of optimum holistic building environmental and energy performance information to support informed decision making

Political drivers such as the Kyoto protocol, the EU Energy Performance of Buildings Directive and the Energy end use and Services Directive have been implemented in response to an identified need for a reduction in human related CO2 emissions. Buildings account for a significant portion of global CO2 emissions, approximately 25-30%, and it is widely acknowledged by industry and research organisations that they operate inefficiently. In parallel, unsatisfactory indoor environmental conditions have proven to negatively impact occupant productivity. Legislative drivers and client education are seen as the key motivating factors for an improvement in the holistic environmental and energy performance of a building. A symbiotic relationship exists between building indoor environmental conditions and building energy consumption. However traditional Building Management Systems and Energy Management Systems treat these separately. Conventional performance analysis compares building energy consumption with a previously recorded value or with the consumption of a similar building and does not recognise the fact that all buildings are unique. Therefore what is required is a new framework which incorporates performance comparison against a theoretical building specific ideal benchmark. Traditionally Energy Managers, who work at the operational level of organisations with respect to building performance, do not have access to ideal performance benchmark information and as a result cannot optimally operate buildings. This thesis systematically defines Holistic Environmental and Energy Management and specifies the Scenario Modelling Technique which in turn uses an ideal performance benchmark. The holistic technique uses quantified expressions of building performance and by doing so enables the profiled Energy Manager to visualise his actions and the downstream consequences of his actions in the context of overall building operation. The Ideal Building Framework facilitates the use of this technique by acting as a Building Life Cycle (BLC) data repository through which ideal building performance benchmarks are systematically structured and stored in parallel with actual performance data. The Ideal Building Framework utilises transformed data in the form of the Ideal Set of Performance Objectives and Metrics which are capable of defining the performance of any building at any stage of the BLC. It is proposed that the union of Scenario Models for an individual building would result in a building specific Combination of Performance Metrics which would in turn be stored in the BLC data repository. The Ideal Data Set underpins the Ideal Set of Performance Objectives and Metrics and is the set of measurements required to monitor the performance of the Ideal Building. A Model View describes the unique building specific data relevant to a particular project stakeholder. The energy management data and information exchange requirements that underlie a Model View implementation are detailed and incorporate traditional and proposed energy management. This thesis also specifies the Model View Methodology which complements the Ideal Building Framework. The developed Model View and Rule Set methodology process utilises stakeholder specific rule sets to define stakeholder pertinent environmental and energy performance data. This generic process further enables each stakeholder to define the resolution of data desired. For example, basic, intermediate or detailed. The Model View methodology is applicable for all project stakeholders, each requiring its own customised rule set. Two rule sets are defined in detail, the Energy Manager rule set and the LEED Accreditor rule set. This particular measurement generation process accompanied by defined View would filter and expedite data access for all stakeholders involved in building performance. Information presentation is critical for effective use of the data provided by the Ideal Building Framework and the Energy Management View definition. The specifications for a customised Information Delivery Tool account for the established profile of Energy Managers and best practice user interface design. Components of the developed tool could also be used by Facility Managers working at the tactical and strategic levels of organisations. Informed decision making is made possible through specified decision assistance processes which incorporate the Scenario Modelling and Benchmarking techniques, the Ideal Building Framework, the Energy Manager Model View, the Information Delivery Tool and the established profile of Energy Managers. The Model View and Rule Set Methodology is effectively demonstrated on an appropriate mixed use existing ‘green’ building, the Environmental Research Institute at University College Cork, using the Energy Management and LEED rule sets. Informed Decision Making is also demonstrated using a prototype scenario for the demonstration building.

Apoyo a la construcción de un software de soporte a decisiones concernientes al comercio entre Colombia y Estados Unidos

La entrada en vigor del Tratado de Libre Comercio (TLC) con Estados Unidos representa para los empresarios colombianos la oportunidad de acceder al mercado más importante del mundo en una posición privilegiada, bajo la cual resulta más sencilla la colocación de productos en este pais para aquellas compañías con vocación exportadora. Sin embargo, la alta competencia y desarrollo de este mercado hace necesario que las empresas cuenten con información apropiada que les permita enfocar sus esfuerzos en productos, segmentos de mercado o Estados específicos donde puedan alcanzar la sostenibilidad y perdurabilidad en el tiempo, así como el desarrollo de nuevas posibilidades comerciales. Para tal fin, realizamos este trabajo de investigación con el cual se busca generar una herramienta informática que contenga información respecto al flujo comercial de Colombia hacia cada uno de los 50 estados de EE.UU., detallando en cada caso las oportunidades comerciales identificadas por partidas arancelarias; y que servirá de apoyo para aquellos empresarios colombianos que buscan beneficiarse de la nueva coyuntura comercial que ofrece el acuerdo bilateral.

TOWARD SEMANTIC WEB SERVICES AS MVC APPLICATIONS: FROM OWL-S VIA UML

OWL-S is an application of OWL, the Web Ontology Language, that describes the semantics of Web Services so that their discovery, selection, invocation and composition can be automated. The research literature reports the use of UML diagrams for the automatic generation of Semantic Web Service descriptions in OWL-S. This paper demonstrates a higher level of automation by generating complete complete Web applications from OWL-S descriptions that have themselves been generated from UML. Previously, we proposed an approach for processing OWL-S descriptions in order to produce MVC-based skeletons for Web applications. The OWL-S ontology undergoes a series of transformations in order to generate a Model-View-Controller application implemented by a combination of Java Beans, JSP, and Servlets code, respectively. In this paper, we show in detail the documents produced at each processing step. We highlight the connections between OWL-S specifications and executable code in the various Java dialects and show the Web interfaces that result from this process.

Teknik för en flerskiktadwebbapplikation

The report analyses if some common problems can be avoided by using modern technology. As a reference system “Fartygsrapporteringssystemet” is used. It is an n-tier web application built with modern technology at time, 2003-2004. The aim is to examine whether ASP.Net MVC, Windows Communication Foundation, Workflow Foundation and SQL Server 2005 Service Broker can be used to create an n-tier web application which also communicate with other systems and facilitate automated testing. The report describes the construction of a prototype in which the presentation layer uses ASP.Net MVC to separate presentation and business logic. Communication with the business layer is done through the Windows Communication Foundation. Hard coded processes are broken out and dealt with by Workflow Foundation. Asynchronous communication with other systems is done by using Microsoft SQL Server 2005 Service Broker. The results of the analysis is that these techniques can be used to create a n-tier web application, but that ASP.Net MVC, which at present only available in a preview release, is not sufficiently developed yet.

As Centrais Hidrelétricas de Canoas I e II no Médio Vale Paranapanema: história e impactos sócios-econômicos

Pós-graduação em História - FCLAS

Brincando de gangorra: uma discussão sobre formação de professores e uso de tecnologias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gestión de pacientes de un Servicio de Urgencias Hospitalarias

[ES] Un servicio de urgencias de una zona ofrece asistencia sanitaria y tiene como principal objetivo atender la patología urgente que acude al hospital y el nivel de compromiso que se asume consiste en diagnosticar, tratar y estabilizar, en la medida posible, dicha patología urgente. Otro objetivo es gestionar la demanda de atención urgente por parte del ciudadano a través de un sistema de selección prioritaria inicial (Triaje) que selecciona, prioriza, organiza y gestiona la demanda de atención. Para poder controlar y realizar el trabajo de la forma más eficaz se utilizan herramientas de gestión necesarias para el control de los pacientes, desde que se realiza su ingreso en el servicio de urgencias hasta el alta del mismo. Las aplicaciones desarrolladas son las siguientes: Gestión de Pacientes en Urgencias: Esta aplicación asignará un estado inicial al paciente y permitirá ir cambiando el estado del mismo usando el método del Triaje (valoración), el más difundido en la medicina de urgencias. Además, se podrán solicitar pruebas diagnósticas y la visualización de marcadores de analíticas para comprobar su evolución. Finalmente, se podrá desarrollar un informe de alta para el paciente. Informadores de Urgencias: La aplicación gestiona la localización física del paciente dentro del servicio de urgencias, permitiendo asimismo el cambio entre las distintas localizaciones y el control para la información a los familiares de los mismos, pudiendo almacenar los familiares y teléfonos de contactos para que estos puedan ser informados. El desarrollo se ha realizado utilizando el MVC (modelo - vista - controlador) que es patrón de arquitectura que separa los datos de una aplicación, la interfaz gráfica de usuario y la lógica de control de componentes. El software utilizado para el desarrollo de las aplicaciones es CACHÉ de Intersystems que permite la creación de una base de datos multidimensional. El modelo de objetos de Caché se basa en el estándar ODMG (Object Database Management Group, Grupo de gestión de bases de datos de objetos) y soporta muchas características avanzadas. CACHÉ dispone de Zen, una biblioteca completa de componentes de objetos preconstruidos y herramientas de desarrollo basadas en la tecnología CSP (Caché Server Pages) y de objetos de InterSystems. ZEN es especialmente apropiado para desarrollar una versión Web de las aplicaciones cliente/servidor creadas originalmente con herramientas como Visual Basic o PowerBuilder.